Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “W”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

The X-ray morphology of the Perseus cluster of galaxies

Results are reported for a sounding-rocket measurement of the spatial distribution of the X-ray flux from the Perseus cluster of galaxies in the range from 0.5 to 4.5 keV. Two scans (N-S and E-W) were made along the line of galaxies extending from NGC 1275 to IC 310. A flux maximum is observed which is coincident with the location of NGC 1275, but the X-ray distribution is shown to exclude just a point source. More broadening is detected in the E-W direction, and a comparison with other X-ray and optical data indicates a complex structure for the cluster. A three-component model is proposed in which the total X-ray luminosity of the cluster may be a combination of contributions from a central point source (NGC 1275), a condensed disk-like region oriented edge-on along the line of galaxies, and a more symmetric region extending out to at least 1 deg.

Wolff, R. S.↗
NASA NTRS1975

The infrared excess of cool giant stars - A chromospheric contribution

The idea that the infrared excesses of evolved M stars may contain a contribution from a chromosphere is explored using alpha Ori and W Hya as test cases. The spectrum of alpha Ori between 8 and 30 millimicrons can be interpreted satisfactorily in terms of three components: a photosphere, a silicate dust cloud, and a cool chromosphere (temperature about 5000 K), which is optically thick at 14 millimicrons. A similar modelling for W Hya suggests a hotter chromosphere (temperature about 8000 K), with unit optical depth at 30 millimicrons. Some consequences of these chromospheres are briefly discussed.

Lambert, D. L.↗
NASA NTRS1974

Orange glass - Evidence for regional deposits of pyroclastic origin on the moon

Crystallized spheres of orange glass from Shorty Crater at the Apollo 17 site are shown by spectral reflectance data to be the characteristic ingredient of the dark mantling deposit of the Taurus-Littrow region. This deposit, mapped on spectral vidicon images taken using earth-based telescopes, apparently is thickest 50 km northwest of the Apollo 17 landing area, and has a gradational contact with the surrounding materials. The irregular areal distribution of the dark-mantle deposit and the gradational borders support conclusions based on laboratory studies of the orange soils that these are volcanic pyroclastic materials. Similar deposits are identified by spectral reflectance properties near Rima Bode, Schroeter W, Fauth H, and Higinus W. The same material is likely to occur at Sulpucius Gallus based on visual and photographic observations of orange soil. The apparently restricted occurrence of the orange-glass deposits in a belt along the edges of major mare basins implies structural control of volcanic vents and a possible deep-seated origin.

Adams, J. B.↗
NASA NTRS1976

Low vapor pressure braze alloys for thermionic energy converters

The evaluation of cesium diode electrode materials called for braze fillers with very low vapor pressures and a wide range of melting points. Binary alloys of low vapor pressure refractory metals were chosen to fill this need. These alloys of Th, Zr, Hf, Ru, Nb, Ir, Mo, Ta, Os, Re, and W have reported melting point minima or eutectics from 1,510 K to above 3,000 K. Preliminary data are compiled on the use of several of these braze alloys. Melting points and surface wetting on a Ta base are given. Results of brazing Ir, LaB6, Nb, Re, W, and Zr-22 wt % ZrO2 materials into Ta and Nb-1% Zr bases are presented. Current braze usage is summarized.

Bair, V. L.↗
NASA NTRS1976

TX Cancri - Which component is hotter

The question is considered of whether the W-type light curves of TX Cnc result from a slightly higher temperature for the low-mass component or from a relatively strong classical gravity-darkening law. Photometric parameters for this W UMa binary area derived using light curves from four epochs exhibiting dissimilar behavior. The analysis is performed for up to five colors, and solutions are obtained by two different approaches in which the temperature difference between the components is treated as a free parameter or is determined by the surface gravitational field. The results of the second approach show that the polar effective temperature of the low-mass star is about 30 K cooler than that of the high-mass star, while the results of the first approach show the low-mass star to be 125 to 175 K hotter. Preference is given to the second approach because gravity darkening provides a simple and adequate explanation of the light curves. Epoch-to-epoch changes in the gravity-darkening and albedo parameters are taken as suggesting differences in the degree of thermal contact over a time scale of a few years.

Wilson, R. E.↗
NASA NTRS1976

A study of the effect of subcritical crack growth on the geometry dependence on nonlinear fracture toughness parameters

The effect of subcritical crack growth on the geometry dependence of nonlinear fracture toughness parameters was studied by comparing the toughness values for different specimen geometries at the onset of subcritical crack growth and at the initiation of unstable crack propagation. Center-cracked thin sheet specimens of 2024-T3 and 7075-T6 aluminum alloys were tested by varying the specimen length L, width w, and crack length-to-width ratio c/w. When the onset of unstable crack propagation was selected as the critical point, the nonlinear energy toughness and the R curve toughness increased with increasing w and decreasing L and c/w. However, when the onset of subcritical crack growth was taken as the critical point, energy toughness and the linear toughness values were independent of these geometrical variables.

Jones, D. L.↗
NASA NTRS1977

Adiabatic particle motion in a nearly drift-free magnetic field: Application to the geomagnetic tail

The guiding center motion of particles in a nearly drift free magnetic field is analyzed in order to investigate the dependence of mean drift velocity on equatorial pitch angle, the variation of local drift velocity along the trajectory, and other properties. The mean drift for adiabatic particles is expressed by means of elliptic integrals. Approximations to the twice-averaged Hamiltonian W near z = O are derived, permitting simple representation of drift paths if an electric potential also exists. In addition, the use of W or of expressions for the longitudinal invariant allows the derivation of the twice averaged Liouville equation and of the corresponding Vlasov equation. Bounce times are calculated (using the drift-free approximation), as are instantaneous guiding center drift velocities, which are then used to provide a numerical check on the formulas for the mean drift.

Stern, D. P.↗
NASA NTRS1977

Thermal performance of an integrated thermal protection system for long-term storage of cryogenic propellants in space

It was demonstrated that cryogenic propellants can be stored unvented in space long enough to accomplish a Saturn orbiter mission after 1,200-day coast. The thermal design of a hydrogen-fluorine rocket stage was carried out, and the hydrogen tank, its support structure, and thermal protection system were tested in a vacuum chamber. Heat transfer rates of approximately 23 W were measured in tests to simulate the near-Earth portion of the mission. Tests to simulate the majority of the time the vehicle would be in deep space and sun-oriented resulted in a heat transfer rate of 0.11 W.

Dewitt, R. L.↗
NASA NTRS1976

Adsorbate densities on /100/W

Auger electron spectroscopy and flash desorption mass spectrometry were used to determine the relative saturation densities of C, O, H, and N atoms on (100)W from adsorption of O2, H2, N2, CO, NO, and H2O. Particular attention is given to a discussion of the densities of CO, N2, and H2. It is found that no models of the structure of H2 on (100)W are consistent with all of the experimental data on this system, but a density of 1.5 times 10 to the 15th atoms per sq cm suggests that sites of fourfold coordination may be more likely than bridge-bonded sites of twofold coordination. For the other adsorbates, the measurements are in good agreement with previously assumed densities and they confirm that adsorbate densities are simple multiples or fractions of substrate atom densities.

Viswanath, Y.↗
NASA NTRS1976

Lidar measurement of stratospheric dust from St. Augustine Volcano

The detection of a stratospheric dust layer of probable volcanic origin over Hampton, Va., on the evening of Jan. 28, 1976, with a 20-inch lidar system is reported. A digitized cathode-ray-tube trace of a return signal from altitudes of 12 to 24 km on January 28 is provided, and it is shown that 38% of the return was due to stratospheric aerosol. Noting that measurements on January 22 and February 2 showed no traces of this stratospheric dust layer, trajectories of dust-laden air parcels are followed from initiation at 0000 GMT on January 24 at the St. Augustine Volcano on Augustine Island, Alaska (59 deg N, 153 deg W). Analysis of the trajectories indicates that dust injected into the stratosphere at 59 deg N, 153 deg W could have been transported to Virginia in about 4 days. It is concluded that if the St. Augustine Volcano was the source of the dust, at least 23 deg of meridional transport from polar latitudes was observed.

Remsberg, E. E.↗
NASA NTRS1977

Pallasites - Metal composition, classification and relationships with iron meteorites

A comparative study was conducted of the metal composition of 34 pallasites in order to shed further light on the origin of these meteorites. Concentrations of Au, As, Co, Ga, Ge, Ir, Ni, and W in pallasitic metal were determined. Most pallasites are found to have similar compositions indicating a close genetic relationship, and are designated as main group. The Eagle Station Trio is unrelated to the main group as indicated by higher Ni, Ge, and Ir and lower As, Au, and Ga contents in the metal, and olivine richer in Fe and Sc and poorer in Mg and Mn. The trio of Springwater, Rawlinna and Phillips County have metal compositions appropriate to high-Ni main group members, but their fayalite contents suggest they are not closely related to it. Pavlodar and Glorieta Mountain appear to be unique pallasites, and Brenham an anomalous main group member. Krasnoyarsk is classified as a main group member. Main group pallasites have metal compositions which overlap those of IIIAB iron meteorites on a Ga-Ge plot, and they have similar Au, As, Cr, Ir, Ni and W contents to high-Ni IIIAB irons.

Scott, E. R. D.↗
NASA NTRS1976

Low vapor pressure braze alloys for thermionic energy converters

Preliminary results in the use of some low-vapor-pressure braze alloys are reported; these are binary alloys of refractory metals (Th, Zr, Hf, Ru, Nb, Ir, Mo, Ta, Os, Re, W) with vapor pressures below 0.1 nanotorr at 1500 K or 10 microtorr at 2000 K. The melting point minima or eutectics of the alloys range from 1510 K to above 3000 K. Melting points and surface wetting on a Ta base are given. Results are presented on brazing of Ir, LaB6, Nb, Re, W, and ZrO2 (with 22 wt % Zr) into a Ta base or a Nb-1% Zr base. The results are applicable in electrode screening programs for thermionic cesium diodes.

Bair, V. L.↗
NASA NTRS1977

In-flight measurements of the GA/W/-2 aerodynamic characteristics

Flight tests of a new 13% General Aviation Airfoil - the GA(W)-2 - gloved full span onto the existing wing of a Beech Sundowner have generated chordwise pressure distributions and wake surveys. Section lift, drag and moment coefficients derived from these measurements verify wind tunnel data and theory predicting the performance of this airfoil. The effect of steps, rivets and surface coatings upon the drag of the GA(W)-2 was also evaluated.

Gregorek, G. M.↗
NASA NTRS1977

Satellite-observed latent heat release in a tropical cyclone

The latent heat release (LHR) and the distribution of rainfall rate of a tropical cyclone as it grows from a tropical disturbance to a typhoon were determined from Nimbus 5 Electrically Scanning Microwave Radiometer data. The LHR (calculated over a circular area of 4 deg latitude radius) increased during the development and intensification of the storm from a magnitude of 2.7 x 10 to the fourteenth W (in the disturbance stage) to 8.8 x 10 to the fourteenth W (typhoon stage). The latter value corresponds to a mean rainfall rate of 2.0 mm/h. The more intense the cyclone and the greater the LHR, the greater the percentage contribution of the larger rainfall rates to the LHR. As a cyclone intensifies, the higher rainfall rates tend to concentrate toward the center of the circulation.

Adler, R. F.↗
NASA NTRS1978

Friction and wear of metals with a single-crystal abrasive grit of silicon carbide: Effect of shear strength of metal

Sliding friction experiments were conducted with spherical, single-crystal silicon carbide riders in contact with various metals and with metal riders in contact with silicon carbide flats. Results indicate that: (1) the friction force in the plowing of metal and (2) the groove height (corresponding to the volume of the groove) are related to the shear strength of the metal. That is, they decrease linearly as the shear strength of the bulk metal increases. Grooves are formed in metals primarily from plastic deformation, with occasional metal removal. The relation between the groove width D and the load W can be expressed by W = kD, superscript n which satisfies Meyer's law.

Miyoshi, K.↗
NASA NTRS1978

Arecibo radar observations of Martian surface characteristics near the equator

Mars radar observations at 12.6-cm wavelength indicate that many of what were potential Viking landing sites along the planet's equator are rougher than interpretations of Mariner 9 images suggested. Root mean square surface slopes are typically 5 degrees in the region bounded by 160 and 200 degrees W, 0 and 12 degrees S. From Tharsis Montes west to 160 degrees W, radar-scattering characteristics suggest extreme roughness on small scales, perhaps exceeding 10 degrees in rms magnitude. East of Tharsis and north of Valles Marineris the surface is smooth, with values of rms slope as low as 1 degree; the elevation of this plateau was too high for a Viking landing. Study of spectral shapes indicates the Hagfors scattering law remains the best descriptor of quasi-specular surface scattering properties in an average sense; widespread variations in the surface argue against its indiscriminate use, however. Backscattering at moderate (25-40 degrees) incidence angles was studied qualitatively and was found to be significantly above the level predicted by a strictly quasi-specular (e.g., Hagfors) process; it also is variable over the surface.

Simpson, R. A.↗
NASA NTRS1977

Turbulence processes and simple closure schemes

The problem of closure in turbulence in the case of two-point correlations resides in the existence of two unknowns E and W, the energy spectrum function and the transfer function, respectively, in the spectrum equation. In the case of weak turbulence, W is negligible. In case of higher correlations, closure can be effective by neglecting the inertia term in the highest order term used. Specifying a certain number of spectra at an initial time is also a way of getting around the closure problem. A simple case of turbulent shear flow is then considered, where two-point correlation equations are used and the velocity is broken into mean and fluctuating components. This yields a differential equation for the energy spectrum, the three terms of which are the energy spectrum, production term and dissipation term. They are plotted for a particular time. Similar analyses and comparisons with experiment are made for pipe and boundary layer flows.

Deissler, R. G.↗
NASA NTRS1978

A continuously pulsed copper halide laser with a cable-capacitor Blumlein discharge circuit

Experimental characteristics of a continuously pulsed copper halide laser with a cable-capacitor Blumlein discharge circuit are reported. Quartz laser tubes 1 m in length and 1.5 and 2.5 cm in diameter were employed to study the effects of the electrical circuit, lasant, and buffer gas on laser performance. Measured properties of the Blumlein circuit are compared with an analytic solution for an idealized circuit. Both CuCl and CuBr with neon and helium buffer gas were studied. A maximum average power of 12.5 W was obtained with a 1.5 nF capacitor charged to 8 kV and discharged at 31 kHz with CuCl and neon buffer gas at 0.7 kPa in a 2.5-cm-diam tube. A maximum efficiency of 0.72 percent was obtained at 9 W average power. Measurements of the radial distribution of the power in the laser beam and the variation of laser power at 510.6 and 578.2 nm with halide vapor density are also reported. Double and continuously pulsed laser characteristics are compared, and the role of copper metastable level atoms in limiting the laser pulse energy density is discussed.

Nerheim, N. M.↗