SEARCH · Engineering Papers

Results for “Verification of data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Submicrosecond comparison of international clock synchronization by VLBI and the NTS satellite

The intercontinental clock synchronization capabilities of Very Long Baseline Interferometry (VLBI) and the Navigation Technology Satellite (NTS) were compared using both methods to synchronize the Cesium clocks at the NASA Deep Space Net complexes at Madrid, Spain and Goldstone, California. Verification of the accuracy of both systems was examined. The VLBI experiments used the Wideband VLBI Data Acquisition System developed at the NASA Jet Propulsion Laboratory. The NTS Satellites were designed and built by the Naval Research Laboratory used with NTS Timing Receivers developed by the Goddard Space Flight Center. The two methods agreed at about the one-half microsecond level.

Hurd, W. J.↗

NASA NTRS1979

Space transportation system solid rocket booster thrust vector control system

The Solid Rocket Booster, Thrust Vector Control (TVC) system was designed in accordance with the following requirements: self-contained power supply, fail-safe operation, 20 flight uses after exposure to seawater landings, optimized cost, and component interchangeability. Trade studies were performed which led to the selection of a recirculating hydraulic system powered by Auxiliary Power Units (APU) which drive the hydraulic actuators and gimbal the solid rocket motor nozzle. Other approaches for the system design were studied in arriving at the recirculating hydraulic system powered by an APU. These systems must withstand the imposed environment and be usable for a minimum of 20 Space Transportation System flights with a minimum of refurbishment. The TVC system has completed the major portion of qualification and verification tests and is prepared to be cleared for the first Shuttle flight (STS-1). Substantiation data will include analytical and test data.

Verble, A. J., Jr.↗

NASA NTRS1982

Interaction of a cumulus cloud ensemble with the large-scale environment. III - Semi-prognostic test of the Arakawa-Schubert cumulus parameterization

The verification of the Arakawa and Schubert (1974) cumulus parameterization is continued using a semiprognostic approach. Observed data from Phase III of GATE are used to provide estimates of the large-scale forcing of a cumulus ensemble at each observation time. Instantaneous values of the precipitation and the warming and drying due to cumulus convection are calculated using the parameterization. The results show that the calculated precipitation agrees very well with estimates from the observed large-scale moisture budget and from radar observations. The calculated vertical profiles of cumulus warming and drying also are quite similar to the observed. It is shown that the closure assumption adopted in the parameterization (the cloud-work function quasi-equilibrium) results in errors of generally less than 10% in the calculated precipitation. The sensitivity of the parameterization to some assumptions of the cloud ensemble model and the solution method for the cloud-base mass flux is investigated.

Lord, S. J.↗

NASA NTRS1982

Digital overlay of cartographic information on Landsat MSS data for soil surveys

Cartographic soils data were digitized, spatially registered, and merged with processed Landsat image data. The Landsat Multispectral Scanner Subsystem (MSS) image data were used to generate a thematic map representing different soil surface characteristics and an enhanced image. The thematic map was generated using supervised and unsupervised classification procedures. The enhanced image was generated by performing a linear contrast stretch on data altered by a principal components transformation. Although both procedures yielded images useful for soil unit delineation, image enhancement was determined to be more suitable because it was more expedient and inexpensive. Enhanced images cost $0.06 per hectare, spectral classifications cost $0.08 per hectare. The overlay of cartographic data on Landsat data facilitates comparisons between the various processing methods used for soil unit boundary determination, delineation, and verification. This technique also provides for accurate and expedient spatial referencing for field observations and cartographic correlation.

Imhoff, M. L.↗

NASA NTRS1982

Ames Research Center life sciences payload

In response to a recognized need for an in-flight animal housing facility to support Spacelab life sciences investigators, a rack and system compatible Research Animal Holding Facility (RAHF) has been developed. A series of ground tests is planned to insure its satisfactory performance under certain simulated conditions of flight exposure and use. However, even under the best conditions of simulation, confidence gained in ground testing will not approach that resulting from actual spaceflight operation. The Spacelab Mission 3 provides an opportunity to perform an inflight Verification Test (VT) of the RAHF. Lessons learned from the RAHF-VT and baseline performance data will be invaluable in preparation for subsequent dedicated life sciences missions.

Callahan, P. X.↗

NASA NTRS1982

Approaches to environmental verification of STS free-flier and pallet payloads

This paper presents an overview of the environmental verification programs followed on an STS-launched free-flier payload, using the Tracking and Data Relay Satellite (TDRS) as an example, and a pallet payload, using the Office of Space Sciences-1 (OSS-1) as an example. Differences are assessed and rationale given as to why the differing programs were used on the two example payloads. It is concluded that the differences between the programs are due to inherent differences in the payload configuration, their respective mission performance objectives and their operational scenarios rather than to any generic distinctions that differentiate between a free-flier and a pallet payload.

Keegan, W. B.↗

NASA NTRS1987

Ground and flight test results of a total main rotor isolation system

A six degree-of-freedom (DOF) isolation system using six LIVE units has been installed under an Army/NASA contract on a Bell 206LM helicopter. This system has been named the Total Rotor Isolation System, or TRIS. To determine the effectiveness of TRIS in reducing helicopter vibration, a flight verification study was conducted at Bell's Flight Research Center in Arlington, Texas. The flight test data indicate that the 4/rev vibration level at the pilot's seat were suppressed below the 0.04g level throughout the transition envelope. Flight tests indicate over 95% suppression of vibration level from the rotor hub to the pilot's seat. The TRIS installation was designed with a decoupled control system and has shown a significant improvement in aircraft flying qualities, such that it permitted the trimmed aircraft to be flown hands-off for a significant period of time, over 90 seconds. The TRIS flight test program has demonstrated a system that greatly reduces vibration levels of a current-generation helicopter, while significantly improving the flying qualities to a point where stability augmentation is no longer a requirement.

Halwes, Dennis R.↗

NASA NTRS1988

An innovative approach to supplying an environment for the integration and test of the Space Station distributed avionics systems

This paper describes an innovative approach to supplying an environment for the integration and testing of the Space Station distributed avionics systems. The environment's relationship to the process flow of the Space Station verification from systems development to on-orbit verification is presented. This paper also describes the uses of the environment's hardware implementation called Data Management System (DMS) kits. The way in which this environment allows system developers to independently verify their system's performance, fault detection, and recovery capability is explained.

Barry, Thomas↗

NASA NTRS1992

ONAV - An Expert System for the Space Shuttle Mission Control Center

The ONAV (Onboard Navigation) Expert System is being developed as a real-time console assistant to the ONAV flight controller for use in the Mission Control Center at the Johnson Space Center. Currently, Oct. 1991, the entry and ascent systems have been certified for use on console as support tools, and were used for STS-48. The rendezvous system is in verification with the goal to have the system certified for STS-49, Intelsat retrieval. To arrive at this stage, from a prototype to real-world application, the ONAV project has had to deal with not only Al issues but operating environment issues. The Al issues included the maturity of Al languages and the debugging tools, verification, and availability, stability and size of the expert pool. The environmental issues included real time data acquisition, hardware suitability, and how to achieve acceptance by users and management.

Mills, Malise↗

NASA NTRS1992

Statistical modeling of software reliability

This working paper discusses the statistical simulation part of a controlled software development experiment being conducted under the direction of the System Validation Methods Branch, Information Systems Division, NASA Langley Research Center. The experiment uses guidance and control software (GCS) aboard a fictitious planetary landing spacecraft: real-time control software operating on a transient mission. Software execution is simulated to study the statistical aspects of reliability and other failure characteristics of the software during development, testing, and random usage. Quantification of software reliability is a major goal. Various reliability concepts are discussed. Experiments are described for performing simulations and collecting appropriate simulated software performance and failure data. This data is then used to make statistical inferences about the quality of the software development and verification processes as well as inferences about the reliability of software versions and reliability growth under random testing and debugging.

Miller, Douglas R.↗

NASA NTRS1993

Earth system dynamics: The interrelation of atmospheric, ocean and solid earth dynamics

The research work performed during the time period 16 Oct. 1992 through 31 Dec. 1993 is summarized. The overall research activity, including a list of the major findings of the EOS IDS research to date, is described, the publications and presentations are listed, and a budget request for the subsequent year is attached. Specifically, the report covers: EOS panel activities; major findings of research; team member contributions; new research directions; EOS restructuring effect; changes in requirements; plans for using existing data; collaborations with other EOS and non-EOS investigations; EOS instrument team interaction; instrument development verification and validation; interaction with EOSDIS and DAAC's; team coordination; overall management; summary of response to site review questions and comments; science computing facility; and additional new research activities.

Tapley, Byron D.↗

NASA NTRS1993

Time dependent behavior of a graphite/thermoplastic composite and the effects of stress and physical aging

Two complimentary studies were performed to determine the effects of stress and physical aging on the matrix dominated time dependent properties of IM7/8320 composite. The first of these studies, experimental in nature, used isothermal tensile creep/aging test techniques developed for polymers and adapted them for testing of the composite material. From these tests, the time dependent transverse (S22) and shear (S66) compliance's for an orthotropic plate were found from short term creep compliance measurements at constant, sub-T(sub g) temperatures. These compliance terms were shown to be affected by physical aging. Aging time shift factors and shift rates were found to be a function of temperature and applied stress. The second part of the study relied upon isothermal uniaxial tension tests of IM7/8320 to determine the effects of physical aging on the nonlinear material behavior at elevated temperature. An elastic/viscoplastic constitutive model was used to quantify the effects of aging on the rate-independent plastic and rate-dependent viscoplastic response. Sensitivity of the material constants required by the model to aging time were determined for aging times up to 65 hours. Verification of the analytical model indicated that the effects of prior aging on the nonlinear stress/strain/time data of matrix dominated laminates can be predicted.

Gates, Thomas S.↗

NASA NTRS1995

Clouds and the Earth's Radiant Energy System (CERES) Visualization Single Satellite Footprint (SSF) Plot Generator

The first Clouds and the Earth's Radiant Energy System (CERES) instrument will be launched in 1997 to collect data on the Earth's radiation budget. The data retrieved from the satellite will be processed through twelve subsystems. The Single Satellite Footprint (SSF) plot generator software was written to assist scientists in the early stages of CERES data analysis, producing two-dimensional plots of the footprint radiation and cloud data generated by one of the subsystems. Until the satellite is launched, however, software developers need verification tools to check their code. This plot generator will aid programmers by geolocating algorithm result on a global map.

Barsi, Julia A.↗

NASA NTRS2000

ISS Microgravity Environment Monitoring System (MEMS): System Design - Part 1

The Principal Investigator Microgravity Services project at the NASA Glenn Research center supports Principal Investigators of the microgravity science community as they evaluate the effects of acceleration on their experiments. The Principal Investigator Microgravity Services' primary responsibility is to support NASA sponsored investigators in the area of acceleration data analysis, interpretation and the monitoring of the microgravity environment on-board various carriers. The microgravity environment is a rich and very complex dynamic one. It is subject to quasi-steady accelerations, higher frequency acceleration, and transient disturbances. With the advent of the International Space Station operation, a significant amount of data is expected to be downlinked and processed for both the space station microgravity environment characterization (verification) and scientific experiments. Therefore, to help principal investigator teams monitor the microgravity environment on-board the International Space Station in order to avoid negative impact on their experiment, when possible, the NASA Glenn Principal Investigator Microgravity Services project is currently developing an artificial intelligence monitoring system, which will notify the principal investigator teams in near real time of any change in the microgravity environment susceptible to affect their experiments.

Jules, Kenol↗

NASA NTRS2010

A Modeling and Verification Study of Summer Precipitation Systems Using NASA Surface Initialization Datasets

One of the most challenging weather forecast problems in the southeastern U.S. is daily summertime pulse-type convection. During the summer, atmospheric flow and forcing are generally weak in this region; thus, convection typically initiates in response to local forcing along sea/lake breezes, and other discontinuities often related to horizontal gradients in surface heating rates. Numerical simulations of pulse convection usually have low skill, even in local predictions at high resolution, due to the inherent chaotic nature of these precipitation systems. Forecast errors can arise from assumptions within parameterization schemes, model resolution limitations, and uncertainties in both the initial state of the atmosphere and land surface variables such as soil moisture and temperature. For this study, it is hypothesized that high-resolution, consistent representations of surface properties such as soil moisture, soil temperature, and sea surface temperature (SST) are necessary to better simulate the interactions between the surface and atmosphere, and ultimately improve predictions of summertime pulse convection. This paper describes a sensitivity experiment using the Weather Research and Forecasting (WRF) model. Interpolated land and ocean surface fields from a large-scale model are replaced with high-resolution datasets provided by unique NASA assets in an experimental simulation: the Land Information System (LIS) and Moderate Resolution Imaging Spectroradiometer (MODIS) SSTs. The LIS is run in an offline mode for several years at the same grid resolution as the WRF model to provide compatible land surface initial conditions in an equilibrium state. The MODIS SSTs provide detailed analyses of SSTs over the oceans and large lakes compared to current operational products. The WRF model runs initialized with the LIS+MODIS datasets result in a reduction in the overprediction of rainfall areas; however, the skill is almost equally as low in both experiments using traditional verification methodologies. Output from object-based verification within NCAR s Meteorological Evaluation Tools reveals that the WRF runs initialized with LIS+MODIS data consistently generated precipitation objects that better matched observed precipitation objects, especially at higher precipitation intensities. The LIS+MODIS runs produced on average a 4% increase in matched precipitation areas and a simultaneous 4% decrease in unmatched areas during three months of daily simulations.

Jonathan L. Case↗

NASA NTRS2011

Generalized Fluid System Simulation Program, Version 5.0-Educational. Supplemental Information for NASA/TM-2011-216470

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependent flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors and external body forces such as gravity and centrifugal. The thermofluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the point, drag and click method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids and 21 different resistance/source options are provided for modeling momentum sources or sinks in the branches. This Technical Memorandum illustrates the application and verification of the code through 12 demonstrated example problems. This supplement gives the input and output data files for the examples.

Majumdar, A. K.↗

NASA NTRS2022

Treatment of Launch Vehicle Flight Control Stability Margin Reductions for Crewed Missions with Emphasis on Slosh Dynamics

NESC’s perspective for crewed spaceflight: Acceptance of flight control gain/phase stability margin reductions from industry standards should be accompanied by an adequately extensive technical treatment, including: •Analyzing the fundamental physics involved, with applicable simulation tool verification (particularly if results are dissimilar among rules of thumb, linear tools, nonlinear analysis, and flight data) •Conducting sensitivity studies in time and frequency domains to analyze effects of possible parameter and system variations •Studying the effects of the consequence of instability associated with offending modes by running stressing cases in time domain •Assessing alternative flight control designs to demonstrate that present design appropriately balances overall vehicle risk (i.e., quantitatively delineate chosen tradeoffs between various stability margins and vehicle performance in the context of risk/consequence) Work presented here represents an example summary of expected engineering work to flight-certify crewed missions with unstable slosh modes and reduced stability margins

Launch Vehicle Flight Control↗

NASA NTRS1983

Process and quality verification controls for solid propellant manufacturing

It is pointed out that in-process tests to verify quality and detect discrepant propellant which could compromise motor performance are essential elements of the solid composite propellant manufacturing process. The successful performance of the 260SL-1 and 260SL-2 motors aptly verified the controls used for manufacturing the propellant. The present investigation is concerned with the selected control parameters, and their relationships to composition and final propellant properties. Control performance is evaluated by comparison with processing data experienced in the manufacture of the propellant for the 260SL-1 motor. It is found that the in-process quality verification controls utilized in the propellant manufacturing process for the 260-in. diameter motor contributed significantly to the confidence of successful and predictable motor performance.

Rogers, C. J.↗