Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Thermal diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

In situ synchrotron diffraction and modeling of non-equilibrium solidification of a MnFeCoNiCu alloy

The solidification mechanism and segregation behavior of laser-melted Mn 35 Fe 5 Co 20 Ni 20 Cu 20 was firstly investigated via in situ synchrotron x-ray diffraction at millisecond temporal resolution. The transient composition evolution of the random solid solution during sequential solidification of dendritic and interdendritic regions complicates the analysis of synchrotron diffraction data via any single conventional tool, such as Rietveld refinement. Therefore, a novel approach combining a hard-sphere approximation model, thermodynamic simulation, thermal expansion measurement and microstructural characterization was developed to assist in a fundamental understanding of the evolution of local composition, lattice parameter, and dendrite volume fraction corresponding to the diffraction data. This methodology yields self-consistent results across different methods. Via this approach, four distinct stages were identified, including: (I) FCC dendrite solidification, (II) solidification of FCC interdendritic region, (III) solid-state interdiffusion and (IV) final cooling with marginal diffusion. It was found out that in Stage I, Cu and Mn were rejected into liquid as Mn 35 Fe 5 Co 20 Ni 20 Cu 20 solidified dendritically. During Stage II, the lattice parameter disparity between dendrite and interdendritic region escalated as Cu and Mn continued segregating into the interdendritic region. After complete solidification, during Stage III, the lattice parameter disparity gradually decreases, demonstrating a degree of composition homogenization. The volume fraction of dendrites slightly grew from 58.3 to 65.5%, based on the evolving composition profile across a dendrite/interdendritic interface in diffusion calculations. Postmortem metallography further confirmed that dendrites have a volume fraction of 64.7 ± 5.3% in the final microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Emergence of a nocturnal low-level jet from a broad baroclinic zone

An analytical model is presented for the generation of a Blackadar-like nocturnal low-level jet in a broad baroclinic zone. The flow is forced from below (flat ground) by a surface buoyancy gradient and from above (free atmosphere) by a constant pressure gradient force. Diurnally-varying mixing coefficients are specified to increase abruptly at sunrise and decrease abruptly at sunset. With attention restricted to a surface buoyancy that varies linearly with a horizontal coordinate, the Boussinesq-approximated equations of motion, thermal energy, and mass conservation reduce to a system of one-dimensional equations that can be solved analytically. Sensitivity tests with southerly jets suggest that (i) stronger jets are associated with larger decreases of the eddy viscosity at sunset (as in Blackadar theory), (ii) the nighttime surface buoyancy gradient has little impact on jet strength, and (iii) for pure baroclinic forcing (no free-atmosphere geostrophic wind), the nighttime eddy diffusivity has little impact on jet strength, but the daytime eddy diffusivity is very important and has a larger impact than the daytime eddy viscosity. The model was applied to a jet that developed in fair weather conditions over the Great Plains from southern Texas to northern South Dakota on 1 May 2020. The ECMWF Reanalysis v5 (ERA5) for the afternoon prior to jet formation showed that a broad north-south-oriented baroclinic zone covered much of the region. The peak model-predicted winds were in good agreement with ERA5 winds and lidar data from the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility in north-central Oklahoma.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

MOSCATO Development and Integration in Fiscal Year 2023

In FY23, significant developments were made to the MOSCATO code package, enhancing its capabilities in many aspects. The improvements and advancements can be summarized as follows: Code Restructuring: The MOSCATO code underwent a restructuring process, enabling both Nek5000 and NekRS to share the same interface when using MOSCATO. This integration facilitates smoother interactions between the different modules and streamlines the overall simulation process. Automatic Domain Extension: To allow simulations to propagate over longer time frames, an automatic domain extension capability was added to the metal diffusion module. This enhancement enables more accurate and reliable simulations of diffusion processes, especially in scenarios with extended time requirements. Expanded Corrosion Reactions: The updated MOSCATO package now includes additional reactions that contribute to corrosion. This addition enhances the code’s ability to model corrosion effects more comprehensively, providing a more realistic representation of the systems being studied. Example Case Setup: To assist users and showcase MOSCATO’s capabilities, we developed example cases for various applications. Notably, we created example cases for thermal cells and corrosion loops. These pre-configured cases allow users to get started quickly and effectively with their simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Solution Processed Ternary Tin (II) Alloy as Hole–Transport Layer of Sn–Pb Perovskite Solar Cells for Enhanced Efficiency and Stability

Tin-lead (Sn-Pb) narrow bandgap (NBG) perovskites show great potential in both single-junction and all-perovskite tandem solar cells. Sn-Pb perovskite solar cells (PSCs) are still limited by low charge collection efficiency and poor stability. Here, we report a ternary Sn (II) alloy of SnOCl as the hole-transport material (HTM) with a work function of 4.95 eV for Sn-Pb PSCs. The solution processed SnOCl layer has a texture structure which not only reduces the optical loss of the devices but also changes grain growth of Sn-Pb perovskites and boosts the carrier diffusion length to 3.63 μm. The formation of small perovskite grains at the HTM/perovskite interface is suppressed. These result in an almost constant internal quantum efficiency of 96 ± 2% across the absorption spectrum of Sn-Pb perovskites. The SnOCl HTM significantly enhances the stability of Sn-Pb PSCs with 87% of its initial efficiency retained after 1-sun illumination for 1,200 h, and keep 85% efficiency under 85°C thermal stress for 1,500 h. Furthermore, the hybrid HTM further improve the stabilized efficiencies of single-function Sn-Pb PSCs and all-perovskite tandem solar cells to 23.2% and 25.9%, respectively. This discovery opens an avenue to the multi-component metal alloys as HTM in PSCs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamic Behavior of Pt Multimetallic Alloys for Active and Stable Propane Dehydrogenation Catalysts

Improving the use of platinum in propane dehydrogenation catalysts is a crucial aspect to increasing the efficiency and sustainability of propylene production. A known and practiced strategy involves incorporating more abundant metals in supported platinum catalysts, increasing its activity and stability while decreasing the overall loading. Here, using colloidal techniques to control the size and composition of the active phase, we show that Pt/Cu alloy nanoparticles supported on alumina (Pt/Cu/Al 2 O 3 ) displayed elevated rates for propane dehydrogenation at low temperature compared to a monometallic Pt/Al 2 O 3 catalyst. We demonstrate that the enhanced catalytic activity is correlated with a higher surface Cu content and formation of a Pt-rich core and Cu-rich shell that isolates Pt sites and increases their intrinsic activity. However, rates declined on stream because of dynamic metal diffusion processes that led to a more uniform alloy structure. This transformation was only partially inhibited by adding excess hydrogen to the feed stream. Instead, cobalt was introduced to provide trimetallic Pt/Cu/Co catalysts with stabilized surface structure and stable activity and higher rates than the original Pt/Cu system. In conclusion, the structure–activity relationship insights in this work offer improved knowledge of propane dehydrogenation catalyst development featuring reduced Pt loadings and notable thermal stability for propylene production.

Alloys↗
DOE OSTI2020

Observation of shock-front separation in multi-ion-species collisional plasma shocks

We observe shock-front separation and species-dependent shock widths in multi-ion-species collisional plasma shocks, which are produced by obliquely merging plasma jets of a He/Ar mixture (97% He and 3% Ar by initial number density) on the plasma liner experiment. Visible plasma emission near the He-I 587.6-nm and Ar-II 476.5–514.5-nm lines is simultaneously recorded by splitting a single visible image of the shock into two different fast-framing cameras with different narrow bandpass filters (589 ± 5 nm for observing the He-I line and 500 ± 25 nm for the Ar-II lines). For conditions in these experiments (pre-shock ion and electron densities ≈5×10 14 cm –3 , ion and electron temperatures of ≈2.2 eV, and relative plasma-merging speed of 22 km/s), the observationally inferred magnitude of He/Ar shock-front separation and the shock widths themselves are <1 cm, which correspond to ~50 post-shock thermal ion–ion mean free paths. These experimental length scales are in reasonable qualitative and quantitative agreement with results from 1D multi-fluid simulations using the CHICAGO code. However, we note there are differences between the experimentally inferred and simulation-predicted ionization states and line emission intensities, particularly in the post-shock region. Overall, the experimental and simulation results are consistent with theoretical predictions that the lighter He ions diffuse farther ahead within the overall shock front than the heavier Ar ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Comparisons of Nodal diffusion and whole-core transport methods for multiple cycles of a small Light water reacto

As part of a cooperative research and development agreement between the US department of Energy's Oak Ridge National Laboratory and Holtec International subsidiary SMR LLC, core simulator models of the SMR-160, a light water-cooled and -moderated, natural circulation, small modular reactor, were developed and compared. The model results indicate pin-by-pin power histories, critical boron concentration, and other key performance indicators useful for developing multi-cycle core loading patterns. One model uses industry standard nodal methods with a simple thermal-hydraulics solution, and the other uses an advanced deterministic neutronics solver with a coupled subchannel calculation. The goals of the comparison are to provide the reactor designer with a detailed and coupled core physics reference solution, inform the reactor designer of nodal model best practices based on the code-to-code comparison, and set up a workflow for performing subsequent detailed core simulator calculations. The results of this work will be used in the development of coupled neutronic, thermal hydraulic, and fuel performance models for advanced analysis of the SMR-160. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

STRUCTURE AND PROPERTIES STUDY ON ENERGY MATERIALS: THERMOELECTRIC MATERIAL TETRAHEDRITE AND LITHIUM ION CONDUCTOR

Development of efficient energy materials is critical in order to ease the energy demand and reduce our dependence of fossil fuel. Thermoelectric materials are promising due to their capability of generating electrical power by recovering waste heat. The performance of thermoelectric materials is quantified by a dimensionless figure of merit zT, which depends on their properties such as electrical conductivity, Seebeck coefficient and thermal conductivity. Tetrahedrites, a copper antimony sulfosalt mineral, typified by Cu 12-x MxSb 4 S 13 , where M is a transition metal element such as Ni, Zn, Fe or Mn, have great potential for thermoelectric application due to their relatively high zT (close to 1 at 700 K), earth-abundance, environmental friendliness, favorable electrical properties, and most importantly intrinsic low lattice thermal conductivity (less than 1 W m -1 K -1 ) in wide temperature. In addition to energy recovery, reliable energy storage devices are also emerging to relieve the energy demand and improve the efficiency of consuming energy resources. Lithium-ion batteries are known to be reliable and successful electrochemical energy storage devices and appliable in various aspects, including laptops, smartphones and electrical vehicles. Lithium phosphorous oxynitride (LiPON) are widely used as thin-film solid-state electrolytes in Li-ion battery, which is the only demonstrated solid-state electrolyte that is quite stable in direct contact with Li metal at potentials from 0-5 V. However, the structure of LiPON, the effects of N doping, and the origin of its good electrochemical stability remains inconclusive. In this thesis, reliable modeling techniques accompanied with experimental tools, are applied to study the thermoelectric material tetrahedrite and the ionic conductor LiPON, in order to study their structural and dynamical properties. Accurate and efficient density-functional theory (DFT) and density-functional tight-binding (DFTB) methods, combined with molecular dynamics (MD) simulations are utilized in order to investigate the structures and properties of these energy materials. The incoherent and coherent atomic dynamics study of tetrahedrite Cu 10.5 NiZn 0.5 Sb 4 S 13 provides the origin of softening upon cooling by investigate the motion of Cu12e at different temperatures. The dynamic structure factors in the longitudinal and transverse direction will also be discussed. The Cu movement of Cu-rich tetrahedrite Cu 14 Sb 4 S 13 is revealed by Cu self-diffusivity, nuclear density map and “nudged elastic band” (NEB). Moreover, we investigate the effect of simulation cell size and basis sets on the DFT-based MD simulation results using tetrahedrite Cu1 0 Zn 2 Sb 4 S 13 thermoelectric as a model material, showing the advantage of larger cell by accessing smaller Q range. In addition, the low-temperature structural properties of Cu 12 Sb 4 S 13 is measured by neutron diffraction, which indicates that no cubic to tetragonal transition occurs at metal-semiconductor transition (MST) temperature. Thermoelectric properties such as Seebeck coefficient, electrical resistivity and electrical thermal conductivity will also be investigated. DFTB method is implemented to study the structure and transport properties of Li 3 PO 4 and LiPON, while the exploration of N doping effect is included. Lastly, the LiPON/Li interphase will be revealed in order to study the origin of electrochemical stability.

Li, Junchao↗
DOE OSTI2024

Mechanically and Thermally Robust Gel Electrolytes Built from A Charged Double Helical Polymer

Polymer electrolytes have received tremendous interest in the development of solid-state batteries, but often fall short in one or more key properties required for practical applications. Herein, a rigid gel polymer electrolyte prepared by immobilizing a liquid mixture of a lithium salt and poly(ethylene glycol) dimethyl ether with only 8 wt% poly(2,2′-disulfonyl-4,4′-benzidine terephthalamide) (PBDT) is reported. The high charge density and rigid double helical structure of PBDT lead to formation of a nanofibrillar structure that endows this electrolyte with stronger mechanical properties, wider temperature window, and higher battery rate capability compared to all other poly(ethylene oxide) (PEO)-based electrolytes. The ion transport mechanism in this rigid polymer electrolyte is systematically studied using multiple complementary techniques. Li/LiFePO 4 cells show excellent capacity retention over long-term cycling, with thermal cycling reversibility between ambient temperature and elevated temperatures, demonstrating compelling potential for solid-state batteries targeting fast charging at high temperatures and slower discharging at ambient temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Thin Alumina Film as a Tritium Adsorption Inhibitor for Stainless Steel 316

The effect of a thin alumina coating on stainless-steel 316 (SS316) samples on tritium adsorption and transport are discussed. Compact films of alumina were produced on the surfaces of pristine SS316 samples using an atomic layer deposition (ALD) technique. Subsequently, these samples were exposed for 24 hours to a deuterium-tritium gas mixture (P T =0.5 atm, 25°C). A combination of methods including selective-etching and programmed thermal desorption were employed to assess both, the depth profile of the tritium concentration in the sample and the total quantity of tritium absorbed respectively. Tritium was quantitatively determined through the measurement of beta radioactivity using liquid-scintillation counting techniques. Data suggest that SS316 with a thin film of alumina reduces the total tritium uptake by ~25% relative to uncoated samples. Significantly, such films appear to reduce, by a factor of 200, tritium diffusion into SS316 and therefore constitute an effective barrier against tritium transport. This observation is of practical importance for tritium and, generally, reactive gas handling.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Correlated dynamic disorder, octahedral tilts, and acoustic phonon softening in CsSnBr 3 and CsPbBr 3

Metal halide perovskites (MHPs) have emerged as highly promising materials for optoelectronic applications, with all-inorganic MHPs presenting enhanced stability compared to their hybrid counterparts. Here, in this study, we investigate the atomic dynamics and structural fluctuations in single crystals of CsSnBr⁢ 3 and CsPbBr⁢ 3 through systematic inelastic neutron scattering (INS) measurements as a function of temperature. Our experiments are compared with first-principle simulations, augmented with large-scale molecular dynamics modeling, based on machine-learned neural network potentials. Through both INS and simulations, we find quasi-elastic diffuse rods in reciprocal space in both compounds, originating from fluctuating planar domains featuring correlated tilts of Br octahedron. The diffuse rods exhibit a slow, overdamped dynamic process, modulated across 𝑸 space, reflecting the strong lattice anharmonicity of the inorganic framework. We do not find evidence for dynamic off-centering of the Sn 2+ ions besides phonon vibrations at the center of the Br octahedron. These results offer valuable insights into the unusual anharmonic atomic dynamics and intricate correlated structural distortions in MHPs, which will be critical for rationalizing and further tailoring their thermal and optoelectronic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Deep X-Ray Observation of NGC 3221: Everything Everywhere All at Once

We present a comprehensive analysis of 475 ks (438 ks unpublished and 37 ks archival) XMM-Newton/EPIC-pn observations of a nearby, highly inclined, star-forming, luminous infrared galaxy NGC 3221 through spatial, temporal, and spectral information. We confirm the presence of a low-luminosity (presumably Compton-thick) active galactic nucleus (AGN). The 0.4–12 keV luminosity and the hardness ratio of the six ultraluminous X-ray sources previously identified in Chandra data exhibit diverse variability on day scales. The collective emission from unresolved sources exhibits a different day-scale variability. We have also discovered two new predominantly soft (<1 keV) sources. One of these has an enigmatic spectral shape featuring a soft component, which we interpret as a superbubble in NGC 3221, and a variable hard component from a compact object, unresolved from the superbubble. We do not confidently detect any X-ray emission from SN 1961L. The hot gas in the interstellar medium (ISM, out to ±6 kpc from the disk plane) and that in the extraplanar region (6–12 kpc) both require two thermal phases at ∼0.15 keV and ∼0.55 keV. The ∼0.55 keV component is fainter in the ISM than the ∼0.15 keV component, but the emission from the latter falls off more steeply with disk height than the emission from the former. This makes the extraplanar region hotter and less dense than the ISM. The proximity of NGC 3221 and the occurrence of the underluminous AGN offer a unique observing opportunity to study the hot diffuse medium along with nuclear and diskwide point sources.

Das, Sanskriti [Stanford Univ., CA (United States)↗
DOE OSTI2021

Data-Driven Reduced-Order Modeling of Convective Heat Transfer in Porous Media

This work presents a data-driven Reduced-Order Model (ROM) for parametric convective heat transfer problems in porous media. The intrusive Proper Orthogonal Decomposition aided Reduced-Basis (POD-RB) technique is employed to reduce the porous medium formulation of the incompressible Reynolds-Averaged Navier–Stokes (RANS) equations coupled with heat transfer. Instead of resolving the exact flow configuration with high fidelity, the porous medium formulation solves a homogenized flow in which the fluid-structure interactions are captured via volumetric flow resistances with nonlinear, semi-empirical friction correlations. A supremizer approach is implemented for the stabilization of the reduced fluid dynamics equations. The reduced nonlinear flow resistances are treated using the Discrete Empirical Interpolation Method (DEIM), while the turbulent eddy viscosity and diffusivity are approximated by adopting a Radial Basis Function (RBF) interpolation-based approach. The proposed method is tested using a 2D numerical model of the Molten Salt Fast Reactor (MSFR), which involves the simulation of both clean and porous medium regions in the same domain. For the steady-state example, five model parameters are considered to be uncertain: the magnitude of the pumping force, the external coolant temperature, the heat transfer coefficient, the thermal expansion coefficient, and the Prandtl number. For transient scenarios, on the other hand, the coastdown-time of the pump is the only uncertain parameter. The results indicate that the POD-RB-ROMs are suitable for the reduction of similar problems. The relative L2 errors are below 3.34% for every field of interest for all cases analyzed, while the speedup factors vary between 54 (transient) and 40,000 (steady-state).

German, Péter (ORCID:0000000307285283)↗
DOE OSTI2023

Mitigating Iodine Diffusion by a MoO 3 –Organic Composite Hole Transport Layer for Stable Perovskite Solar Cells

Halide perovskite solar cells (PSCs) exhibit commercialization potential, but long-term stability still must be addressed. Among various products of perovskite decomposition, iodine species are of considerable concern due to their high vapor pressure and corrosive nature. To address this, a small-molecule hole transport layer (HTL), 4,4',4"-tris[(3-methylphenyl)phenylamino]triphenylamine (m-MTDATA), is used; mixing it with molybdenum trioxide (MoO3) p-dopes the layer and slows iodine permeation. Furthermore, we demonstrate that m-MTDATA:MoO3 HTLs employed in PSCs improve stability under both thermal and voltage bias stress compared to devices with a conventional doped 2,2',7,7'-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9'-spirobifluorene (spiro-OMeTAD) HTL.

14 SOLAR ENERGY↗
DOE OSTI2021

Surface structure of mass-selected niobium oxide nanoclusters on Au(111)

The structures formed by the deposition of mass-selected niobium oxide clusters, Nb 3 O y ( y = 5, 6, 7), onto Au(111) were studied by scanning tunneling microscopy. The as-deposited Nb 3 O 7 clusters assemble into large dendritic structures that grow on the terraces as well as extend from the top and bottom of step edges. The Nb 3 O 6 cluster also forms dendritic assemblies but they are generally much smaller in size. The assemblies are composed of smaller discrete structures (<1 nm) which are likely to be single clusters. Furthermore, the dendritic assemblies for both the Nb 3 O 7 and Nb 3 O 6 clusters have fractal dimensions of about 1.7 which is very close to that expected for simple diffusion limited aggregation. Annealing the Nb 3 O 7,6 /Au(111) surfaces up to 550 K results in changes in assembly sizes and increases in heights, while heating to 700 results in the disruption of the assemblies into smaller structures. By contrast, the as-deposited Nb 3 O 5 /Au(111) surface at RT exhibits compact cluster structures which become 3D nanoparticles when annealed above 550 K. Differences in the observed surface structures and thermal stability are attributed to differences in metal-oxygen stoichiometry which can influence cluster binding energies, mobility and inter-cluster interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

New constraints on warm dark matter from the Lyman- α forest power spectrum

The forest of Lyman-α absorption lines detected in the spectra of distant quasars encodes information on the nature and properties of dark matter and the thermodynamics of diffuse baryonic material. Its main observable—the 1D flux power spectrum (FPS)—should exhibit a suppression on small scales and an enhancement on large scales in warm dark matter (WDM) cosmologies compared to standard Λ⁢CDM. Here, we present an unprecedented suite of 1080 high-resolution cosmological hydrodynamical simulations run with the graphics processing unit-accelerated code cholla to study the evolution of the Lyman-α forest under a wide range of physically motivated gas thermal histories along with different free-streaming lengths of WDM thermal relics in the early Universe. A statistical comparison of synthetic data with the forest FPS measured down to the smallest velocity scales ever probed at redshifts 4.0≲z≲5.2 [E. Boera et al., Revealing reionization with the thermal history of the intergalactic medium: New constraints from the Ly⁢α flux power spectrum, Astrophys. J. 872, 101 (2019)] yields a lower-limit m WDM >3.1 keV (95% C.L.) for the WDM particle mass and constrains the amplitude and spectrum of the photoheating and photoionizing background produced by star-forming galaxies and active galactic nuclei at these redshifts. Interestingly, our Bayesian inference analysis appears to weakly favor WDM models with a peak likelihood value at the thermal relic mass of m WDM =4.5 keV. In conclusion, we find that the suppression of the FPS from free-streaming saturates at k≳0.1 s km -1 because of peculiar velocity smearing, and this saturated suppression combined with a slightly lower gas temperature provides a moderately better fit to the observed small-scale FPS for WDM cosmologies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Abnormal grain growth driven by high-temperature proton irradiation in nanocrystalline Ni

In this research we examine a nanocrystalline Ni thin film exposed to high-temperature proton irradiation and compare it with as-deposited and annealed-only counterparts. Despite lacking thermal spikes typical of heavy ions, 400 °C proton irradiation drives pronounced grain growth in select grains, whereas annealing alone yields only modest coarsening. Grain-boundary statistics show fewer low-angle boundaries (10–20°) and more high-angle boundaries (55–60°), consistent with irradiation-enhanced mobility of high-misorientation boundaries. The irradiated films retain a random texture, with no evidence of texture development or sharpening. Mechanisms, such as radiation-enhanced grain boundary diffusion, beam-induced heating, and ion channeling-mediated selective grain growth, are unlikely to be the predominant drivers to explain the resultant microstructure. Instead, we suggest irradiation-induced modifications of grain-boundary structure, including possible complexion transitions, as one plausible explanation for this selective grain growth and retention of random texture. However, additional temperature–dose studies are required to confirm the mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Favorable Redox Thermodynamics of SrTi 0.5 Mn 0.5 O 3–δ in Solar Thermochemical Water Splitting

Two-step, solar thermochemical splitting of water using nonstoichiometric redox-active metal oxides has emerged as an intriguing approach for large-scale hydrogen production. Perovskites have been proposed as alternatives to state-of-the-art fluorite CeO 2–δ because of their potential for lowering reduction temperature while maintaining high fuel productivity. Guided by computational insights, we explore the thermodynamic properties and water splitting efficacy of the cubic perovskite SrTi 0.5 Mn 0.5 O 3–δ (STM55). Thermogravimetric analysis is performed under controlled oxygen partial pressures (pO 2 ) and temperatures up to 1500 °C, from which both the enthalpy and entropy of reduction as a function of oxygen nonstoichiometry are determined. STM55 provides an attractive combination of moderate enthalpy, 200–250 kJ (mol-O) –1 , and high entropy, with unusual δ dependence. Using a water splitting cycle in which the material is thermally reduced at 1350 °C (pO 2 , ~10 –5 atm) and subsequently exposed to steam at 1100 °C (steam partial pressure of pH 2 O = 0.4 atm), we demonstrate a hydrogen yield of 7.4 mL g –1 . Through both half-cycles, the material remains largely in quasi-equilibrium with the gas phase, as reflected in the agreement of the measured data with predicted profiles based on the thermodynamic data. This behavior indicates rapid surface and bulk diffusion kinetics. Cyclic operation showed the material to be free of degradation and always resulted in a 2:1 yield of H 2 /O 2 . Altogether, STM55 provides outstanding performance characteristics for thermochemical hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗