Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Subsurface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Photoacoustic microscopy of ceramic turbine blades

Scanning photoacoustic microscopy (SPAM) is evaluated as a nondestructive technique for the detection of both surface and subsurface flaws in polycrystalline ceramics, such as those currently under consideration for the high temperature components of small vehicular and industrial gas turbine engines; the fracture strength of these brittle materials is controlled by small, 25-200 micron flaws. Attention is given to the correlation of SPAM-detected flaws with actual, fracture-controlling flaws in ceramic turbine blades.

Khandelwal, P. K.↗

Spatial and temporal patterns in pigment biomass in Gulf Stream warm-core ring 82B and its environs

A chronology of the horizontal and vertical distribution of phytoplankton pigment biomass provides a biological life history of Gulf Stream warm-core ring 82B. Development of ring 82B is followed through three distinct periods: a winter/early spring period of deep convective overturn with uniform and relatively high pigment concentrations to depths of 400 m, a late spring stratification period with subsurface (20-30 m) pigment maxima and relatively high ring center values compared to surrounding waters, and a Gulf Stream interaction period when ring characteristics are dominated by intrusions of low pigment concentration waters. While the ring maintains a unique identity throughout these periods of its life, prolonged deep vertical mixing as well as episodic interactions with its surrounding have a significant influence on pigment distributions within the ring. These interactions generally enhance pigment biomass compared to the water mass from which it is derived. A consistent feature of pigment distribution is the remarkable coherence between this measure of phytoplankton biomass and the corresponding physical hydrodynamic structure of the upper water column.

Smith, R. C.↗

Foreland Basin Structures and Remote Sensing

Rocky Mountain foreland basins are somewhat unique in that the basins may exhibit a variety of structural styles. It is generally agreed that shortening has occurred in the foreland basement but the cause is controversial: vertical vs compressional horizontal tectonics. Even when shortening is attributed to compression, the attitude (dip) of the fault plane and whether the horizontal or vertical component of movement is dominant is unconstrained. The controversy is difficult to resolve from surface data alone due to the variety of possible interpretations. Detailed surface mapping and geologic modeling are needed to constrain subsurface interpretations. In many areas of the Wind River and Bighorn basins detailed geologic maps do not exist. State-of-the-art remote sensing data could potentially provide an efficient means of mapping surface geology. State-of-the-art remote sensing systems now provide geometrically correct data at 30 meter pixel size and increased spectral coverage, capable of more detailed geologic analyses. These data can be photographically enlarged to 1:24,000 scale and combined with 7 1/2' uses topographic quads to provide an excellent base map for geologic interpretations.

Paylor, E. D.↗

Bibliography of terrestrial impact structures

This bibliography lists 105 terrestrial impact structures, of which 12 are proven structures, that is, structures associated with meteorites, and 93 are probable. Of the 93 probable structures, 18 are known to contain rocks with meteoritic components or to be enriched in meteoritic signature-elements, both of which enhance their probability of having originated by impact. Many of the structures investigated in the USSR to date are subsurface features that are completely or partly buried by sedimentary rocks. At least 16 buried impact structures have already been identified in North America and Europe. No proven nor probable submarine impact structure rising above the ocean floor is presently known; none has been found in Antarctica or Greenland. An attempt has been made to cite for each impact structure all literature published prior to mid-1983. The structures are presented in alphabetical order by continent, and their geographic distribution is indicated on a sketch map of each continent in which they occur. They are also listed tables in: (1) alphabetical order, (2) order of increasing latitude, (3) order of decreasing diameter, and (4) order of increasing geologic age.

Grolier, M. J.↗

Satellite magnetic modeling of north African hot spots

The primary objectives of the MAGSAT mission was to measure the intensity and direction of magnetization of the Earth's crust. A significant effort was directed to the large crustal anomalies first delineated by the POGO mission. The MAGSAT data are capable of spatial resolution of the crustal field to 250 km wavelength with reliability limits to less than 1 nT in the mean. The difficulties of dealing with less than the most robust of the MAGSAT anomalies is that often there is no more than the magnetic fields themselves to constrain geophysical models of the interior, and no independent means of assessing the quality of the crustal anomaly data in interpreting the subsurface are available.

Phillips, R. J.↗

Dislocation model for aseismic fault slip in the transverse ranges of Southern California

Geodetic data at a plate boundary can reveal the pattern of subsurface displacements that accompany plate motion. These displacements are modelled as the sum of rigid block motion and the elastic effects of frictional interaction between blocks. The frictional interactions are represented by uniform dislocation on each of several rectangular fault patches. The block velocities and fault parameters are then estimated from geodetic data. Bayesian inversion procedure employs prior estimates based on geological and seismological data. The method is applied to the Transverse Ranges, using prior geological and seismological data and geodetic data from the USGS trilateration networks. Geodetic data imply a displacement rate of about 20 mm/yr across the San Andreas Fault, while the geologic estimates exceed 30 mm/yr. The prior model and the final estimates both imply about 10 mm/yr crustal shortening normal to the trend of the San Andreas Fault. Aseismic fault motion is a major contributor to plate motion. The geodetic data can help to identify faults that are suffering rapid stress accumulation; in the Transverse Ranges those faults are the San Andreas and the Santa Susana.

Cheng, A.↗

Quantitative flaw characterization with scanning laser acoustic microscopy

Surface roughness and diffraction are two factors that have been observed to affect the accuracy of flaw characterization with scanning laser acoustic microscopy. In accuracies can arise when the surface of the test sample is acoustically rough. It is shown that, in this case, Snell's law is no longer valid for determining the direction of sound propagation within the sample. The relationship between the direction of sound propagation within the sample, the apparent flaw depth, and the sample's surface roughness is investigated. Diffraction effects can mask the acoustic images of minute flaws and make it difficult to establish their size, depth, and other characteristics. It is shown that for Fraunhofer diffraction conditions the acoustic image of a subsurface defect corresponds to a two-dimensional Fourier transform. Transforms based on simulated flaws are used to infer the size and shape of the actual flaw.

Generazio, E. R.↗

Heat balances of the surface mixed layer in the equatorial Atlantic and Indian Ocean during FGGE

Surface meteorological and surface and subsurface oceanographic data collected during FGGE in the equatorial Atlantic and Indian Oceans are used to estimate the terms in a heat balance relation for the mixed layer. The first balance tested is between changes in mixed layer temperature (MLT) and surface energy fluxes. Away from regions of low variance in MLT time series and equatorial and coastal upwelling, surface fluxes can account for 75 percent of the variance in the observed time series. Differences between observed and estimated MLTs indicate that on the average, maximum errors in surface flux are of the order of 20 to 30 W/sq m. In the Atlantic, the addition of zonal advection does not significantly improve the estimates. However in regions of equatorial upwelling, the eastern Atlantic vertical mixing and meridional advection can play an important role in the evolution of MLTs.

Molinari, R. L.↗

Relations between extensional tectonics and magmatism within the Southern Oklahoma aulacogen

Variations in the geometry, distribution and thickness of Cambrian igneous and sedimentary units within southwest Oklahoma are related to a late Proterozoic - early Paleozoic rifting event which formed the Southern Oklahoma aulacogen. These rock units are exposed in the Wichita Mountains, southwest Olkahoma, located on the northern margin of a Proterozoic basin, identified in the subsurface by COCORP reflection data. Overprinting of the Cambrian extensional event by Pennyslvanian tectonism obsured the influence of pre-existing basement structures and contrasting basement lithologies upon the initial development of the aulacogen.

Mcconnell, D. A.↗

Redetermination of parameters for semi-empirical model for spallogenic He and Ne in chondrites

A semi-empirical model described previously satisfactorily reproduced a number of shielding-dependent variations in the relative production rates of spallogenic He and Ne in chondrites. However, data for cores of the Keyes and St. Severin meteorites showed a subsurface build-up in He-3 which was not predicted with the original model parameters and the model was not pursued. Renewed interest in the preatmospheric size of meteorites, spurred in part by the desirability of understanding the exposure history of the SNC meteorites, justifies redetermination of model parameters.

Nyquist, L. E.↗

C2 imagery of the inner coma of Comet IRAS-Araki-Alcock

May 10, 1983 observations of the comet IRAS-Araki-Alcock are analyzed to determine the spatial molecular abundance of C2 in the inner coma, via the Delta-v = +1 Swan band sequence near 4690 A. The observations indicate a deficiency of C2 emission across a projected diameter of about 2000 km that is centered on the peak of continuum emission. Comet imagery indicates a sunward-pointing coma that suggests an outburst of subsurface volatile ices through a nonvolatile surface crust, as predicted for periodic comets. These results are discussed in the framework of instrumental and observational constraints.

Oliversen, R. J.↗

Temperatures within comet nuclei

Knowledge of the temperature distribution within comet nuclei is critical to the understanding of the state and behavior of comets. The present study is concerned with the temperature profile below the surface of the nucleus and below any dust mantle which may be present. With respect to the physics, the considered model is in some respects similar to that discussed by Weissman and Kiefer (1981, 1984). However, the new model is improved in various respects. It represents the first attempt to investigate directly the detailed nature of thermal profiles within a comet nucleus. Included in the investigation are calculations which consider the effects of variations in latitude, nucleus spin axis orientation, surface albedo, and thermal emissivity. It is shown that the application of the model, together with in situ measurements of temperatures within a cometary nucleus, could significantly constrain the range of possible subsurface physical properties.

Squyres, S. W.↗

Volcano/ground ice interactions in Elysium Planitia, Mars

The occurrence within Elysium Planitia of meltwater deposits, possible pseudocraters, collapse features within troughs, and outflow channels indicates that a layer of subsurface volatiles existed at the time of volcanic activity within this area. The pseudocraters are interpreted to be indicators of near-surface volatiles, while meltwater deposits and the degree of preservation of trough walls and floors are thought to signify greater volatile depths. A latitudinal variation in the distribution of these features indicates either that the depth to the volatile layer increased from less than about 50 m at 35 deg N to greater than 600 m at 24 deg N, or that an ice wedge that existed at 35 deg N thinned to nonexistence at 24 deg N. Braided distributary channel systems within the chaotic terrain north of Elysium Planitia show that ephemeral lakes were repeatedly created and drained at this locality. The existence of volatiles contemporaneous with volcanic activity permits a search to be made for explosively generated landforms predicted to exist by previous theoretical models. Morphological evidence for strombolian, vulcanian and plinian eruptions is lacking within western Elysium Planitia; there are no identifiable cinder cones, pyroclastic flow deposits, or mantled areas indicative of large airfall deposits at an image resolution of 50-150 m/pixel. However, the pseudocraters indicate that small-scale phreatomagmatic activity may have taken place.

Mouginis-Mark, P. J.↗

Multipolarization radar images for geologic mapping and vegetation discrimination

NASA has developed an airborne SAR that simultaneously yields image data in four linear polarizations in L-band with 10-m resolution over a swath of about 10 km. Signal data are recorded both optically and digitally and annotated in each of the channels to facilitate completely automated digital correlation. Comparison of the relative intensities of the different polarizations furnishes discriminatory mapping information. Local intensity variations in like-polarization images result from topographic effects, while strong cross polarization responses denote the effects of vegetation cover and, in some cases, possible scattering from the subsurface. In each of the areas studied, multiple polarization data led to the discrimination and mapping of unique surface unit features.

Evans, D. L.↗

Scientific objectives for a 1996 Mars Sample Return Mission

The Mars Sample Return Mission, designed to return a variety of surface and subsurface samples as well as atmospheric samples, is described. Primary information about the planet is essential to understanding its place in the evolution of the solar system. The most accurate landing techniques will be used to place the lander near geologically interesting features. A capable rover will be an essential element of the sample collection strategy to maximize the diversity of the samples. The sample collection and return systems will keep the samples at Mars ambient conditions or colder to preserve the abundances and distribution of volatile components. Planetary quarantine is an important consideration for both the Mars lander and the earth return vehicle. Quarantine procedures must be consistent with the primary objectives of the mission and must not compromise the investigations of the returned samples.

Blanchard, D. P.↗

A Mars sample return mission using a rover for sample acquisition

Mission and vehicle concepts are discussed for obtaining surface and subsurface samples of Mars, acquired by a roving vehicle, and returning those samples to earth for detailed analyses in scientific laboratories. Mission options that were traded off in order to arrive at a baseline mission considered most worthy of further study comprised the following: (1) direct entry vs entry out of Mars orbit; (2) direct return from the Mars surface vs rendezvous in Mars orbit and return to earth from there; and (3) propulsive orbit injection and aeroballistic entry (similar to Viking) vs aerocapture into Mars orbit and aeromaneuvering entry. After a comparison of relative merits - based primarily on mass and cost estimates and secondarily on configurational constraints - a baseline mission was selected: out-of-orbit entry, return after Mars orbit rendezvous, and aerocapture/aeromaneuvering. Trajectory design is based on the 1996 launch opportunity. Launch mass requirements for eight mission options, a mission and vehicle description for the baseline mission, and the outline of a mission sequence of events are presented.

De Vries, J. P.↗

Utilizing the permafrost on Mars

It is noted that analogy between earth landforms resulting from the presence of permafrost has led to the suggestion that ground ice or water was at one time present on Mars. Only a regolith sample will confirm this. With these technologies as background, and known locations of subsurface water, development of a water supply base on Mars can then assume validity and significance. Current practices in terrestrial periglacial environments may be applicable to the Martian situation, taking into account site specific modifications of these techniques.

Phillips, L.↗

Elemental analysis of a comet nucleus by passive gamma ray spectrometry from a penetrator

The Comet Rendezvous Asteroid Flyby (CRAF) spacecraft, to be launched in 1991, was designed to study the physical and chemical properties of cometary and asteroid bodies. It is proposed that these properties can be determined by utilizing a penetrator experiment delivery system aboard the CRAF, which would deliver a passive gamma ray spectrometer to the comet and determine the composition of subsurface materials. Results of calculations for a model comet (50 percent CI carbonaceous chrondrite, 50 percent ices) provide data on the expected gamma ray fluxes, the minimum detectable limits, and the detection uncertainties for 35 isotopes. These results confirm that this technique can determine the composition of both the rocky and ice components, and the rock-to-ice ratio in the nucleus. In addition, useful information regarding the formation of the solar system is provided.

Evans, L. G.↗