Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Effect of added zinc on the properties of cobalt-containing ceramic pigments prepared from layered double hydroxides

Layered double hydroxides (LDHs) with the hydrotalcite-type structure containing Co and Al, or Zn, Co and Al in the brucite-like layers and carbonate in the interlayer have been prepared by coprecipitation. The Zn/Co molar ratio was kept to 1 in all samples, while the divalent/trivalent molar ratio was varied from 2/1 to 1/2. The samples have been characterised by element chemical analysis, powder X-ray diffraction, differential thermal and thermogravimetric analysis, temperature-programmed reduction and FT-IR spectroscopy. A single hydrotalcite-like phase is formed for samples with molar ratio 2/1, which crystallinity decreases as the Al content is increased, developing small amounts of diaspore and dawsonite and probably an additional amorphous phase. Calcination at 1200 deg. C in air led to formation of spinels; a small amount of NaAlO{sub 2} was observed in the Al-rich samples, which was removed by washing. The nature of the spinels formed (containing Co{sup II}, Co{sup III}, Al{sup III} and Zn{sup II}) strongly depends on the cations molar ratio in the starting materials and the calcination treatment, leading to a partial oxidation of Co{sup II} species to Co{sup III} ones. Colour properties (L*a*b*) of the original and calcined solids have been measured. While the original samples show a pink colour (lighter for the series containing Zn), the calcined Co,Al samples show a dark blue colour and the Zn,Co,Al ones a green colour. Changes due to the different molar ratios within a given calcined series are less evident than between samples with the same composition in different series. These calcined materials could be usable as ceramic pigments. - Abstract: Mixed oxides from layered double hydroxides (LDHs) with the hydrotalcite-type structure containing Co and Al or Zn, Co and Al in the brucite-like layers are potential candidates for ceramic pigments with tunable colour properties. Display Omitted

36 MATERIALS SCIENCE↗

Investigation of structural and magnetic properties of nanocrystalline manganese substituted lithium ferrites

Nanocrystalline manganese substituted lithium ferrites Li{sub 0.5}Fe{sub 2.5-x}Mn{sub x}O{sub 4} (2.5<=x>=0) were prepared by sol-gel auto-combustion method. X-ray diffraction patterns revealed that as the concentration of manganese increased, the cubic phase changed to tetragonal. Magnetic properties were measured by hysteresis loop tracer technique. All the compositions indicated ferrimagnetic nature. The surface morphology of all the samples was studied by using scanning and transmission electron microscopy. The substitution of manganese ions in the lattice affected the structural as well as magnetic properties of spinels. - Graphical abstract: The synthesized nanoparticles shapes, sizes and size dispersibilities were obtained from the transmission electron microscopy (TEM). The TEM micrographs of synthesized samples revealed that, spherical shape with average particle size 50 nm. Selected area electron diffraction pattern (SAED) suggests the polycrystallinity and also the formation of spinel ferrites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Raman characterization of alpha- and beta-LiFe{sub 5}O{sub 8} prepared through a solid-state reaction pathway

Lithium ferrite, a mixed-inverse spinel of type A{sub x}B{sub y}[A{sub 1-x}B{sub 1-y}]O{sub 4} was produced through solid state synthesis by calcining a Li{sub 2}CO{sub 3}/Fe{sub 2}O{sub 3} mixture at 900 deg. C. The presence of both the ordered alpha-phase and disordered beta-phase of LiFe{sub 5}O{sub 8} was confirmed by XRD analysis, while formation of the latter was achieved by air quenching from high temperature. Laser Raman analysis was performed on both the alpha-LiFe{sub 5}O{sub 8} and beta-LiFe{sub 5}O{sub 8} powders in order to achieve a reference set of Raman shifts for the spinel. The strongest, characteristic Raman peaks were determined to be 493, 382, 358, 300, and 263 cm{sup -1} for both phases while smaller peaks at 202 and 236 cm{sup -1} present in the alpha-phase were diminishing in intensity when the beta-phase was present, thus providing unique identifiers for the presence of the disordered ferrite structure. SEM images taken of the synthesized LiFe{sub 5}O{sub 8} powders showed particle sizes of less than 300 nm and an even particle size distribution. - Graphical abstract: The disordered, beta-phase of lithium ferrite is sustained by air quenching from 900 deg. C. Shown is a SEM image of beta-LiFe{sub 5}O{sub 8} exhibiting even particle sizes less than 300 nm.

36 MATERIALS SCIENCE↗

Magnetic dilution of the iron sublattice in CoFe{sub 2-x}Sc{sub x}O{sub 4} (0{<=}x{<=}1)

Substitution of Fe for Sc in CoFe{sub 2}O{sub 4} spinel structure is presented. All CoFe{sub 2-x}Sc{sub x}O{sub 4} compounds crystallize in the spinel type structure (space group Fd3-bar m). By using X-ray diffraction studies, magnetic measurements and in-field {sup 57}Fe Moessbauer spectrometry, the limit of substitution has been determined to be equal to x=0.56. An increase in the cell parameter and the strains and a decrease in the apparent crystallites size are observed. For x>0.3, a partial oxidation of cobalt is evidenced and Co{sup 3+} is stabilized in the structure. A ferromagnetic behavior has been observed for all investigated compounds. As x increases, the Curie temperature and the hyperfine fields decrease. Following the Stephenson model, the diminution of T{sub C} is ascribed to a decrease of the main J{sub AB} interaction. -- Graphical abstract: Evolution of the cell parameters, the magnetic properties and the Moessbauer spectra in CoFe{sub 2-r}Sc{sub r}O{sub 4} (0{<=}r{<=}1). Display Omitted

36 MATERIALS SCIENCE↗

Neutron diffraction study and superparamagnetic behavior of ZnFe{sub 2}O{sub 4} nanoparticles obtained with different conditions

Spinel-type (S.G.= Fd3-bar m) ZnFe{sub 2}O{sub 4} fine particles with sizes from 4 to 19 nm prepared by solvothermal and microwave-assisted solvothermal methods have been studied by neutron powder diffraction at room temperature. The cation distribution corresponding to mixed spinel structure (Zn{sup 2+}{sub 1-x}Fe{sup 3+}{sub x})[Fe{sup 3+}{sub 2-x}Zn{sup 2+}{sub x}]O{sub 4} along with the unit cell parameter has been estimated after Rietveld refinement of the obtained neutron diffraction data for all the samples. It has been found that the inversion degree parameter (x) takes values between 0.11 and 0.20 depending not only on the particle size but also on the synthesis conditions as well. All the samples behave as superparamagnetic with an effective magnetic moment per particle ({mu}{sub SP}) from 7.0x10{sup 2} to 7.7x10{sup 3} {mu}{sub B}. The sample obtained by microwave assistance displays a different magnetic behavior as the ZFC and FC magnetic susceptibility and the magnetization versus applied field hysteresis loop measured at 5 K suggest. This is related with the dipole interactions that are a consequence of the higher inversion degree and {mu}{sub SP}. - Graphical abstract: ZnFe{sub 2}O{sub 4} nanoparticles of 19 nm obtained by the solvotermal method together with its Rietveld refined pattern. Highlights: > Solvothermally prepared ZnFe{sub 2}O{sub 4} nanoparticles.{yields} Inversion degree obtained after Rietveld refinement of neutron data.{yields} Superparamagnetic behavior.{yields} Dependence with the synthesis conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Co-Al mixed metal oxides/carbon nanotubes nanocomposite prepared via a precursor route and enhanced catalytic property

The present work reported the synthesis of Co-Al mixed metal oxides/carbon nanotubes (CoAl-MMO/CNT) nanocomposite from Co-Al layered double hydroxide/CNTs composite precursor (CoAl-LDH/CNT). The materials were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), low temperature nitrogen adsorption-desorption experiments, thermogravimetric and differential thermal analyses (TG-DTA), Raman spectra and X-ray photoelectron spectroscopy (XPS). The results revealed that in CoAl-MMO/CNT nanocomposite, the nanoparticles of cobalt oxide (CoO) and Co-containing spinel-type complex metal oxides could be well-dispersed on the surface of CNTs, thus forming the heterostructure of CoAl-MMO and CNTs. Furthermore, as-synthesized CoAl-MMO/CNT nanocomposite was utilized as additives for catalytic thermal decomposition of ammonium perchlorate (AP). Compared to those for pure AP and CoAl-MMO, the peak temperature of AP decomposition for CoAl-MMO/CNT was significantly decreased, which is attributed to the novel heterostructure and synergistic effect of multi-component metal oxides of nanocomposite. - Graphical abstract: Hybrid Co-Al mixed metal oxides/carbon nanotubes nanocomposite showed the enhanced catalytic activity in the thermal decomposition of ammonium perchlorate, as compared to carbon nanotubes and pure Co-Al mixed metal oxides. Highlights: Black-Right-Pointing-Pointer Co-Al mixed metal oxides/carbon nanotubes nanocomposite was synthesized. Black-Right-Pointing-Pointer Co-Al mixed metal oxides consisted of cobalt oxide and Co-containing spinels. Black-Right-Pointing-Pointer Nanocomposite exhibited excellent catalytic activity for the decomposition of AP. Black-Right-Pointing-Pointer The superior catalytic property is related to novel heterostructure and composition.

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties of titanium-based CuTi{sub 2−x}M{sub x}S{sub 4} and CuCr{sub 2−x}Ti{sub x}Se{sub 4} chalcospinels

CuTi{sub 2−x}M{sub x}S{sub 4} (M=Fe, Mn, Co; x=0.3, 0.5) and CuCr{sub 2−x}Ti{sub x}Se{sub 4} (x=0.3, 0.5, 0.7) chalcospinels were synthesized by conventional solid-state reactions. Their crystal structures were determined by single-crystal X-ray diffraction. All of the phases crystallized in cubic spinel-type structures (space group, Fd3{sup ¯}m). For all of the chalcospinel compounds, the edge-length distortion parameter (ELD) indicated that the most distorted polyhedron was Q[(Ti,M){sub 3}Cu], which displayed an ∼8% distortion from an ideal tetrahedron structure (Q=S or Se). The Mn-based thiospinel CuMn{sub 0.3}Ti{sub 1.7}S{sub 4} is paramagnetic, whereas the Fe-based thiospinels (CuTi{sub 2−x}Fe{sub x}S{sub 4}; x=0.3 and 0.7) are strongly antiferromagnetic due to their spin-glass states. The magnetic susceptibility measurements indicated ferromagnetic behavior for the selenospinels (CuCr{sub 2−x}Ti{sub x}Se{sub 4}; x=0.3, 0.5 and 0.7). - Graphical abstract: View along [1 0 0] of CuCr{sub 2−x}Ti{sub x}Se{sub 4} crystal structure showing tetrahedral and octahedral units. To the right, experimental X-ray powder diffraction pattern of CuCr{sub 1.7}Ti{sub 0.3}Se{sub 4} (top) in compared (in a like-mirror representation) to a simulated X-ray pattern from single-crystal data (bottom). - Highlights: • Chalcogenides belong to the family of compounds spinel-type. • Resolved single crystals of the solid solutions have space group Fd-3m. • The distortion of the tetrahedral and octahedral volume were calculated. • These solid solutions shows a ferromagnetic or spin-glass behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and physical properties of Ni-Tb-Fe-O system

A series of soft ferrites in the system Ni{sub 1-x}Tb{sub x}Fe{sub 2}O{sub 4} (0 {<=} x {<=} 0.2), was prepared by a standard ceramic technique. The influence of terbium content was investigated by means of X-ray diffraction, Fourier Transform Infrared (FTIR) spectroscopy and scanning electron microscopy. The X-ray diffraction analysis reveals that the samples have a cubic spinel (single phase) structure for 0 {<=} x {<=} 0.08; for x > 0.08 a small peak of orthorhombic phase (TbFeO{sub 3}) appears and becomes more conspicuous with increased terbium substitution. The lattice parameter changes in a non-linear way as a function of terbium content which may be attributed to differences in the ionic radii of the cations involved and the solubility limit of terbium ions. A gradual increase in the bulk density was observed with the increase of terbium concentration, from 5.13 g/cm{sup 3} to 5.69 g/cm{sup 3}. FTIR absorption spectra of the Ni-Tb-Fe-O system were investigated in the wave number range 370-1500 cm{sup -1}. Each spectrum exhibited two main absorption bands, thereby confirming the spinel structure.

36 MATERIALS SCIENCE↗

Physical and electrochemical study of cobalt oxide nano- and microparticles

Cobalt oxide nanocrystals of size 17–21 nm were synthesized by a simple reaction between cobalt acetate (II) and dodecylamine. On the other hand, micrometric Co{sub 3}O{sub 4} was prepared using the ceramic method. The structural examination of these materials was performed using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM and HRTEM). XRD studies showed that the oxides were pure, well-crystallized, spinel cubic phases with a-cell parameter of 0.8049 nm and 0.8069 nm for the nano and micro-oxide, respectively. The average particle size was 19 nm (nano-oxide) and 1250 μm (micro-oxide). Morphological studies carried out by SEM and TEM analyses have shown the presence of octahedral particles in both cases. Bulk and surface properties investigated by X-ray photoelectron spectroscopy (XPS), point zero charge (pzc), FTIR and cyclic voltammetry indicated that there were no significant differences in the composition on both materials. The magnetic behavior of the samples was determined using a vibrating sample magnetometer. The compounds showed paramagnetic character and no coercivity and remanence in all cases. Galvanostatic measurements of electrodes formed with nanocrystals showed better performance than those built with micrometric particles. - Highlights: • Spinel Co{sub 3}O{sub 4} nanoparticles and microparticles with same structure but with different cell parameters, particle size and surface area were synthesized. • Oxide nanoparticles showed better electrochemical behavior than micrometric ones due to area effect.

36 MATERIALS SCIENCE↗

Influence of pH on the physical and electromagnetic properties of Mg–Mn ferrite synthesized by a solution combustion method

The synthesis of nano-crystalline Mg–Mn ferrites by a solution combustion method using citric acid and ammonia was investigated by varying the pH of the precursor solution, which played an important role in controlling the morphology of the synthesized powders. The phase formation, microstructure and electromagnetic properties were studied using X-ray diffraction, scanning electron microscopy, impedance analyzer and vibrating sample magnetometer. Single phase pure spinel Mg–Mn ferrite powders were obtained for all the samples at different pH (< 1, 3, 5, 7, 9). The results showed that an increase of pH improves the crystallinity of the Mg–Mn ferrite nanoparticles. The average grain size of sintered samples was found to decrease from 2 μm to 0.5 μm with increasing pH values from pH < 1 to pH 9, respectively. The dielectric constant of the samples with different pH is in the range of 7–12 from frequencies of 1 MHz to 1 GHz. The highest saturation magnetization (30.04 emu/g) was obtained for the sample with pH < 1. - Highlights: • Mg–Mn ferrites were synthesized by a solution combustion method with different pH. • Auto-combustion process resulted in the formation of single phase spinel ferrite. • An increase of pH improves the crystallinity of the Mg–Mn ferrite nanoparticles. • pH variation has influence on phase formation and morphology of the ferrite.

36 MATERIALS SCIENCE↗

Assessment of firing conditions in old fired-clay bricks: The contribution of X-ray powder diffraction with the Rietveld method and small angle neutron scattering

Full characterization of fired-clay bricks is crucial for the improvement of process variables in manufacturing and, in case of old bricks, for restoration/replacement purposes. To this aim, five bricks produced in a plant in Czech Republic in the past have been investigated with a combination of analytical techniques in order to derive information on the firing process. An additional old brick from another brickyard was also used to study the influence of different raw materials on sample microstructure. The potential of X-ray diffraction with the Rietveld method and small angle neutron scattering technique has been exploited to describe the phase transformations taking place during firing and characterize the brick microstructure. Unit-cell parameter of spinel and amount of hematite are proposed as indicators of the maximum firing temperature, although for the latter, limited to bricks produced from the same raw material. The fractal quality of the surface area of pores obtained from small angle neutron scattering is also suggested as a method to distinguish between bricks produced from different raw clays. - Highlights: • Rietveld method helps in describing microstructure and physical properties of bricks. • XRPD derived cell parameter of spinel is proposed as an indicator of firing temperature. • SANS effectively describes brick micro and nanostructure, including closed porosity. • Fractal quality of pore surface is proposed as ‘fingerprint’ of brick manufacturing.

36 MATERIALS SCIENCE↗

Characterization of oxide scales grown on alloy 310S stainless steel after long term exposure to supercritical water at 500 °C

The oxide scale grown of static capsules made of alloy 310S stainless steel was investigated by exposure to the supercritical water at 500 °C 25 MPa for various exposure times up to 20,000 h. Characterization techniques such as X-ray diffraction, scanning/transmission electron microscopy, energy dispersive spectroscopy, and fast Fourier transformation were employed on the oxide scales. The elemental and phase analyses indicated that long term exposure to the SCW resulted in the formation of scales identified as Fe{sub 3}O{sub 4} (outer layer), Fe-Cr spinel (inner layer), Cr{sub 2}O{sub 3} (transition layer) on the substrate, and Ni-enrichment (chrome depleted region) in the alloy 310S. It was found that the layer thickness and weight gain vs. exposure time followed parabolic law. The oxidation mechanism and scales grown on the alloy 310S stainless steel exposed to SCW are discussed. - Highlights: •Oxidation of alloy 310S stainless steel exposed to SCW (500 °C/25 MPa) •The layer thickness and weight gain vs. exposure time followed parabolic law. •Oxide layers including Fe{sub 3}O{sub 4} (outer), Fe-Cr spinel (inner) and Cr{sub 2}O{sub 3} (transition) •Ni element is segregated by the selective oxidation of Cr.

36 MATERIALS SCIENCE↗

Characterization and magnetic properties of Sm- and Gd-substituted CoFe{sub 2}O{sub 4} nanoparticles prepared by forced hydrolysis in polyol

Pure nanoparticles of the CoFe{sub 2-x}RE{sub x}O{sub 4} (RE = Gd, Sm; x = 0.0, 0.1) system have been prepared by forced hydrolysis in polyol. The insertion of Sm{sup 3+} and Gd{sup 3+} cations into the cobalt ferrite structure has been investigated. X-ray micro-analysis (EDX) shows that the RE contents are close to the nominal ones. X-ray diffraction (XRD) evidences a cell size increase with slight distortions in the spinel-like lattice indicating the entrance of RE{sup 3+} ions. Micro-Raman spectroscopy confirms the cubic inverse-spinel structure and rules out the existence of impurities like hematite. Magnetic measurements (SQUID) show important differences in the magnetic properties of the unsubstituted and substituted particles. All the particles are superparamagnetic at room temperature and ferrimagnetic at low temperature. However, their main magnetic characteristics appear to be directly dependent on the RE content.

36 MATERIALS SCIENCE↗

Mullite and alumina composites preparation from cordierite and aluminium hydroxide

Densification and phase transformation of mullite and alumina composites prepared from cordierite and aluminium hydroxide mixture were investigated. X-ray diffraction revealed the presence of mullite since the early stage of aluminium hydroxide addition to the cordierite. Above 40 wt.% of aluminium hydroxide addition, the presence of spinel and mullite phases can be detected by X-ray diffraction and confirmed by X-ray photoelectron spectroscopy. The X-ray photoelectron spectroscopy analysis showed that the amounts of spinel as well as mullite present increased with increasing aluminium hydroxide concentration at the expense of cordierite. These analyses were completed by density measurements and scanning electron microscopy observation.

36 MATERIALS SCIENCE↗

The zinc ferrite obtained by oxidative precipitation method as a catalyst in n-butanol conversion

This paper presents the results of catalytic properties of n-butanol conversion of the zinc ferrite obtained by oxidative precipitation method. The zinc ferrite showed good dehydrogenating activity but also catalyzed consecutive bimolecular condensation of emerged aldehyde particles into symmetrical ketone. The zinc-iron oxide of spinel structure was prepared from ferrous sulfate, which forms as a waste during the titanium dioxide production. The X-ray diffraction methods (XRD, XRF) were used in determining the structure and composition of obtained zinc ferrite, while thermogravimetry (TG-DTG), and differential thermal analysis (DTA) were used in the study of thermal transformations of zinc spinel in air.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and magnetic properties of Co{sub 0.2}Cu{sub 0.03}Fe{sub 2.77}O{sub 4} nanoparticles

Co{sub 0.2}Cu{sub 0.03}Fe{sub 2.77}O{sub 4} nanoparticles with different morphologies have been synthesized directly via a simple hydrothermal method. The effects of pH value, precursor concentration, reaction temperature and surfactant on the particle size were discussed. X-ray diffraction analyses showed that the as-synthesized Co{sub 0.2}Cu{sub 0.03}Fe{sub 2.77}O{sub 4} nanoparticles possessed typical spinel structure. Scanning electron microscope images showed different morphologies of the particles, including truncated octahedron and octahedron. It was indicated that well-dispersed Co{sub 0.2}Cu{sub 0.03}Fe{sub 2.77}O{sub 4} nanoparticles can be synthesized at pH values ranging from 11 to 13, and reaction temperature of 160 {sup o}C. The particle size decreased from 18 to 10 nm after the addition of sodium dodecyl sulphate at the pH value of 9. The magnetic measurement showed that the as-prepared Co-Cu spinel ferrite nanoparticles possessed hard magnetic property.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and electrochemical characterizations of nano-La{sub 2}O{sub 3}-coated nanostructure LiMn{sub 2}O{sub 4} cathode materials for rechargeable lithium batteries

LiMn{sub 2}O{sub 4} spinel cathode materials were coated with 1.0, 2.0 and 3.0 wt.% of La{sub 2}O{sub 3} by polymeric process, followed by calcinations at 850 {sup o}C for 6 h in air. The surface coated LiMn{sub 2}O{sub 4} cathode materials were physically characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy and XPS. XRD patterns of La{sub 2}O{sub 3}-coated LiMn{sub 2}O{sub 4} revealed that the coating did not affect the crystal structure and space group Fd3m of the cathode materials, compared to the uncoated LiMn{sub 2}O{sub 4}. The surface morphology and particle agglomeration were investigated using scanning electron microscopy and the TEM image showed a compact coating layer on the surface of the core materials that had average thickness of about 100 nm. XPS data illustrated that the La{sub 2}O{sub 3} was completely coated over the surface of the LiMn{sub 2}O{sub 4} core cathode materials. The galvanostatic charge and discharge of the uncoated and La{sub 2}O{sub 3}-coated LiMn{sub 2}O{sub 4} cathode materials were carried out in the potential range of 3.0 and 4.5 V at 30 {sup o}C and 60 {sup o}C. Among them, 2.0 wt.% of La{sub 2}O{sub 3}-coated spinel LiMn{sub 2}O{sub 4} cathode has improved the structural stability, high reversible capacity and excellent electrochemical performances of the rechargeable lithium batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structural, magnetic and electrical properties of Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0.0, 0.2) nanoparticles

Graphical abstract: The variations of imaginary part of dielectric permittivity (ε″) of TEG@Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} nanocomposite as a function of temperature and frequency for (A) x = 0.0 and (B) x = 0.2. Display Omitted Highlights: ► Nearly monodisperse Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} nanocomposite were prepared via hydrothermal method. ► The ac conductivity showed a temperature dependent behavior at low frequencies. ► dc conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle are found to obey the Arrhenius plot. ► Also these materials may be used in electronic devices and microwave devices. -- Abstract: Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} spinel nanoparticles with Zn concentrations of x = 0.0, 0.2 were prepared by a hydrothermal route in the presence of triethylene glycol (TEG). The structural, magnetic, electrical and dielectric properties of the prepared nanoparticles were studied. The XRD results confirmed the formation of single spinel ferrite structure with crystallite size 9 and 10 nm for x = 0.0 and 0.2 compositions respectively. The lattice parameter (a) increased with increasing Zn concentration. Temperature and frequency dependent electrical and dielectric properties of the prepared ferrites have also been investigated. Our findings show that overall conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle is lower than that of CoFe{sub 2}O{sub 4} and roughly in the range of 10{sup −11}–10{sup −7} S cm{sup −1} depending strongly temperature and frequency owing to the formation of stable electric bonds between the Zn{sup 2+} and Fe{sup 2+} ions, which localizes Fe{sup 2+} charge carriers. The ac conductivity showed a temperature dependent behavior at low frequencies and temperature independent behavior at high frequencies, which is an indication of ionic conductivity. dc conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle are found to obey the Arrhenius plot and can be classified into two regions over with activation energy of 0.113 and 0.163 eV in the ranges of 20–40 °C and 70–120 °C, respectively when CoFe{sub 2}O{sub 4} has an activation energy of 0.245 eV.

36 MATERIALS SCIENCE↗