Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Space”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Quantification of hydrochloric acid and particulate deposition resulting from Space Shuttle launches at John F. Kennedy Space Center, Florida, U.S.A.

Results are presented from studies designed to identify deposition patterns and quantify the ecosystem loading rates of exhaust constituents (which are primarily Al2O3 and HCl) from the Space Shuttle solid rocket motors in the area of the Kennedy Space Center launch pad. Results of measurements indicate that, under certain meteorological conditions, as much as 7.1 x 10 exp 3 kg of particulates and 3.4 x 10 exp 3 kg HCL can be deposited to the near-field environment beyond the launch pad perimeter fence during one STS launch.

Dreschel, Thomas W.↗
NASA NTRS1991

Interference prediction for deep space spacecraft from ground stations - Interference to the Galileo deep space spacecraft from the GOMS geostationary network

A technique for predicting the interference power spectral density from a ground station to a spacecraft in deep space is described. The interference prediction throughout the complete mission is simulated, and distance between the ground station and the deep space spacecraft is calculated. A power spectral density from the GOMS satellite network to the Galileo spacecraft receiver is computed using the thermal noise density level at the Galileo spacecraft as the interference criterion. Data obtained indicate that all three GOMS stations cause at least 30 minutes of interference during Galileo earth flyby number one, and two GOMS ground stations cause at least four minutes of interference during Galileo earth flyby number.

Bishop, Dennis F.↗
NASA NTRS1992

In-space operations for lunar and Mars space transfer vehicles

The in-space operations required to process the lunar and Mars mission vehicles foreseen in early studies for the SEI are discussed. Those studies that have examined the degree to which on-orbit operations alter as a function of the earth-to-orbit launch vehicle size, identified a common set of on-orbit vehicle processing tasks, and generated functional requirements for in-space processing nodes, are summarized. Attention is focused on the amount of time these processing operations might necessitate and how this time duration changes as a result of how the operation is executed and how the hardware is designed.

Raper, James L., Sr.↗
NASA NTRS1991

Welding in space and the construction of space vehicles by welding; Proceedings of the Conference, New Carrollton, MD, Sept. 24-26, 1991

The present conference discusses such topics in spacecraft welding as the NASA Long Duration Exposure Facility's evidence on material properties degradation, EVA/telerobotic construction techniques, welding of the superfluid helium on-orbit transfer flight demonstration tanks and hardware, electron-beam welding of aerospace vehicles, variable-polarity plasma arc keyhole welding of Al, aircraft experiments of low-gravity fusion welding, flash-butt welding of Al alloys, and a computer-aided handbook for space welding fabrication. Also discussed are the welded nozzle extension for Ariane launch vehicles, the existence of on-orbit cold-welding, structural materials performance in long-term space service, high-strength lightweight alloys, steels, and heat-resistant alloys for aerospace welded structures, the NASA-Goddard satellite repair program, and the uses of explosion welding and cutting in aerospace engineering.

Source record↗
NASA NTRS1992

Application of space-time neural networks to detect tether skiprope phenomenon in space operations

The feasibility of operating tethered payloads in earth orbit will be studied during a space shuttle flight scheduled for 1992. Tethered systems may exhibit a circular transverse oscillation or skiprope phenomenon due to interaction between the earth's magnetic field and current pulsing through the tether. Effective damping of this skiprope motion depends on rapid and accurate detection of its magnitude and phase. Satellite attitude motion has characteristic oscillations as well as many other perturbations and therefore the relationship between skiprope parameters and attitude time history is very complex and nonlinear. A space-time neural network (STNN) for filtering satellite rate gyro data is proposed for rapid detection and prediction of skiprope magnitude and phase. A validated orbital operations simulator and STNN software will be used for training and testing of this skiprope detection system. The advantages of STNNs are discussed and STNN configurations and preliminary results are presented.

Lea, Robert N.↗
NASA NTRS1992

Needs for supervised space robots in space exploration

The areas of application for space robots in the Space Exploration Initiative (SEI) are examined by reviewing the roles of SEI supervised robots particularly with planet-surface systems (PSSs). Treatment is given to both teleoperated conventional robot systems and autonomous intelligent systems for comparison in terms of safety, reliability, and productivity. Two development stages are proposed including one with a robotic actor, human observer, and a human supervisor and a second in which a closed-loop control and monitoring system is established. The use of remote control is shown to require robustness, self-calibration and -diagnosis, adjustable autonomy, and multitask capability. The requirements of intelligent control are also listed so that the PSSs of the SEI can be used to enable surface exploration, local-resource utilization potential, and reductions of human tasks.

Erickson, Jon D.↗
NASA NTRS1992

Structurally adaptive space crane concept for assembling space systems on orbit

Many future human space exploration missions will probably require large vehicles that must be assembled on orbit. Thus, a device that can move, position, and assemble large and massive spacecraft components on orbit becomes essential for these missions. A concept is described for such a device: a space crane concept that uses erectable truss hardware to achieve high-stiffness and low-mass booms and uses articulating truss joints that can be assembled on orbit. The hardware has been tested and shown to have linear load-deflection response and to be structurally predictable. The hardware also permits the crane to be reconfigured into different geometries to satisfy future assembly requirements. A number of articulating and rotary joint concepts have been sized and analyzed, and the results are discussed. Two strategies were proposed to suppress motion-induced vibration: placing viscous dampers in selected truss struts and preshaping motion commands. Preliminary analyses indicate that these techniques have the potential to greatly enhance structural damping.

Dorsey, John T.↗
NASA NTRS1991

Space and surface power for the space exploration initiative: Results from project outreach

The analysis and evaluations of the Space and Surface Power panel, one of eight panels created by RAND to screen and analyze submissions to the Space Exploration Initiative (SEI) Outreach Program, is documented. In addition to managing and evaluating the responses, or submissions, to this public outreach program, RAND conducted its own analysis and evaluation relevent to SEI mission concepts, systems, and technologies. The Power panel screened and analyzed submissions for which a substantial portion of the concepts involved power generation sources, transmission, distribution, thermal management, and handling of power (including conditioning, conversion, packaging, and enhancements in system components). A background discussion of the areas the Power panel covered and the issues the reviewers considered pertinent to the analysis of power submissions are presented. An overview of each of the highest-ranked submissions and then a discussion of these submissions is presented. The results of the analysis is presented.

Shipbaugh, C.↗
NASA NTRS1991

Applicability of relative GPS to automated rendezvous between the space shuttle and Space Station

The purpose of this study is to determine the adequacy of the Global Positioning System (GPS) in providing relative navigation for automated rendezvous and proximity operations. The study was performed using the Proximity Operations Simulator (POS), Lockheed's high-fidelity, six-degree-of-freedom simulation of the Space Shuttle and Space Station. This simulation includes identical models of GPS receivers for each vehicle. The navigation software in each vehicle includes identical Kalman filters. Each vehicle estimates its own state, and the relative state is obtained by simply subtracting absolute states.

Clark, Fred D.↗
NASA NTRS1991

Applicability of relative GPS to automated rendezvous between the space shuttle and space station

The purpose of this study is to determine the adequacy of the Global Positioning System (GPS) in providing relative navigation for automated rendezvous and proximity operations. The study was performed using the Proximity Operations Simulator (POS), Lockheed's high-fidelity, 6 degree of freedom simulation of the space shuttle and space station. This simulation includes identical models of GPS receivers for each vehicle. The navigation software in each vehicle includes identical Kalman filters. Each filter computes the absolute state of its vehicle, and the relative state vector is obtained by simply subtracting absolute states.

Clark, Fred D.↗
NASA NTRS1989

Space biology initiative program definition review. Trade study 2: Prototype utilization in the development of space biology hardware

The objective was to define the factors which space flight hardware developers and planners should consider when determining: (1) the number of hardware units required to support program; (2) design level of the units; and (3) most efficient means of utilization of the units. The analysis considered technology risk, maintainability, reliability, and safety design requirements for achieving the delivery of highest quality flight hardware. Relative cost impacts of the utilization of prototyping were identified. The development of Space Biology Initiative research hardware will involve intertwined hardware/software activities. Experience has shown that software development can be an expensive portion of a system design program. While software prototyping could imply the development of a significantly different end item, an operational system prototype must be considered to be a combination of software and hardware. Hundreds of factors were identified that could be considered in determining the quantity and types of prototypes that should be constructed. In developing the decision models, these factors were combined and reduced by approximately ten-to-one in order to develop a manageable structure based on the major determining factors. The Baseline SBI hardware list of Appendix D was examined and reviewed in detail; however, from the facts available it was impossible to identify the exact types and quantities of prototypes required for each of these items. Although the factors that must be considered could be enumerated for each of these pieces of equipment, the exact status and state of development of the equipment is variable and uncertain at this time.

Jackson, L. Neal↗
NASA NTRS1992

A proposal to demonstrate production of salad crops in the Space Station Mockup Facility with particular attention to space, energy, and labor constraints

The Salad Machine Research has continued to be a two path effort with the research at Marshall Space Flight Center (MSFC) focusing on the design, construction, and operation of a semiautomated system (Salad Machine) for the production of salad vegetables within a standard rack. Boeing Corporation in cooperation with NASA MSFC constructed a four drawer Salad Machine which was occasionally placed within the Space Station Freedom Mockup facility for view by selected visitors. Final outfitting of the Salad Machine is awaiting the arrival of parts for the nutrient delivery system. Research at the Alabama A&M facilities focused on compatibility of radish and lettuce plants when grown on the same nutrient solution. Lettuce fresh weight shoot yield was significantly enhanced when lettuce plants were grown on nutrient solution which was shared with radish. Radish tuber production was not significantly affected although there was a trend for radish from shared solutions to be heavier than those grown on separate nutrient solutions. The effect of sharing nutrient solutions on carbohydrate partitioning reflected the effect of sharing solution on fresh weight yield. Lettuce shoot dry weight was significantly greater for plants from shared solutions than from separate. There was no significant effect on sharing nutrient solution on radish tuber dry weight. Partitioning of nitrogen, calcium, magnesium, and potassium was not affected by sharing, there was, however, a disproportionate amount of potassium in the tissues, suggesting luxury consumption of potassium in all plants and tissues. It is concluded that lettuce plants benefit from sharing nutrient solution with radish and that radish is not harmed.

Brooks, Carolyn A.↗
NASA NTRS1992

A structurally adaptive space crane concept for assembling space systems on orbit

A space crane concept is presented which is based on erectable truss hardware to achieve high stiffness and low mass booms and articulating-truss joints which can be assembled on orbit. The hardware is characterized by linear load-deflection response and is structurally predictable. The crane can be reconfigured into different geometries to meet future assembly requirements. Articulating-truss joint concepts with significantly different geometries are analyzed and found to have similar static and dynamic performance, which indicates that criteria other than structural and kinematic performance can be used to select a joint. Passive damping and an open-loop preshaped command input technique greatly enhance the structural damping in the space crane and may preclude the need for an active vibrations suppression system.

Dorsey, John T.↗
NASA NTRS1993

Interference effects on Space Station Freedom and space shuttle orbiter Ku-band downlinks

The space shuttle orbiter (SSO) and Ku-band single access return (KSAR) link and the Space Station Freedom (SSF) KSAR link via the tracking and data relay satellite system (TDRSS) use the same carrier frequency. The interference between spacecraft is minimized by opposite antenna polarizations and by TDRSS antenna beam pointing, but if the SSF and SSO are in close proximity, it is expected that mutual interference will be significant. Recently, Tsang and Su (1988, 1989) simulated the mutual interference effects, using a practical nonlinear bandlimited channel. The purpose of this paper is to demonstrate that a simplified (i.e., linear band-limited channel) analytical approach will yield adequate accuracy for the expected range of operating conditions. Relative degradation in bit energy-to-thermal noise power spectral density ratio to achieve a 10 exp -5 coded bit-error-probability is determined to be 4 dB for the Ku-band SSO-to-TDRS I-channel return link with a 4.5 dB effective signal-to-interference total power ratio (S/I) when the Ku-band SSF-to-TDRS return link interferes, whereas Su's simulation yields approximately 5 dB degradation. For the Ku-band SSF-to-TDRS return link, both analysis and simulation results yield a relative signal degradation of 0.4 dB at the effective S/I = 21.6 dB. In conclusion, interference on the Ku-band SSO-to-TDRS I-channel return link is significant, but on the Ku-band SSF-to-TDRS return link it is negligible.

Kwon, Hyuck M.↗
NASA NTRS1993

Space technology: A study of the significance of recognition for innovators of spinoff technologies. Commercial Space Expo-USA, 1993

This is a report on the data collected at the Commercial Space Expo. The Expo was held 13-14 April 1993, in conjunction with the National Space Symposium. There were two modes of data gathering: surveys of expo registrants and exhibit feedback. In addition, exhibitors were interviewed to get their perspectives on the format of the expo and exhibits. Expo registrants were given a paper-pencil survey instrument at the beginning of the day and were asked to turn in the survey when they left for the day. Of the approximately 100 registrants, 22 surveys were returned. In the exhibit hall were five computers set up to collect people's reactions to specific exhibits. It was envisioned that people would react to each (or several) exhibits they visited. In fact, few people did this: almost everyone who visited a computer responded to one exhibit and did not stop by another computer. Therefore, we did not get a large number of responses for any particular exhibit. Nevertheless, there are some interesting data.

Source record↗
NASA NTRS1994

Way Station to Space: The History of Stennis Space Center

The video traces the history of the Stennis Space Center from its origins as a test facility for President Kennedy's initiative to put a man on the moon to its present day tasks as a leading center for propulsion research and its contributions towards the development of Space Station Freedom.

Source record↗
NASA NTRS1993

The Consolidated Planning and Scheduling System for Space Transportation and Space Station operations - Successful development experience

In 1992, NASA made the decision to evolve a Consolidated Planning System (CPS) by adding the Space Transportation System (STS) requirements to the Space Station Freedom (SSF) planning software. This paper describes this evolutionary process, which began with a series of six-month design-build-test cycles, using a domain-independent architecture and a set of developmental tools known as the Advanced Scheduling Environment. It is shown that, during these tests, the CPS could be used at multiple organizational levels of planning and for integrating schedules from geographically distributed (including international) planning environments. The potential for using the CPS for other planning and scheduling tasks in the SSF program is being currently examined.

Hornstein, Rhoda S.↗
NASA NTRS1994

Space Active Modular Materials Experiments (SAMMES): Low Earth Orbital mission aboard the Space Test Experiments STEP-3 platform

The requirement of satellite systems to survive in the space environment for 5 to 10 years to achieve greater cost effectiveness is discussed. Characterization of the orbital space environment and its effects on spacecraft systems have received considerable research attention. Instrumentation for long term measurement of key physical parameters characterizing the low Earth orbit (LEO) environment and its effects on degradation of spacecraft materials and solar arrays is reported. These measurements enable active, real time monitoring of the health of spacecraft and payload systems. SAMMES is designed to be autonomous, compact, low power, and lightweight.

Joshi, P.↗