Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SiC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Optical beam induced current measurements based on two-photon absorption process in 4H-SiC bipolar diodes

Using a pulsed green laser with a wavelength of 532 nm, a duration pulse of ∼1 ns, and a mean power varying between 1 and 100 mW, induced photocurrents have been measured in 4H-SiC bipolar diodes. Considering the photon energy (2.33 eV) and the bandgap of 4H-SiC (3.2 eV), the generation of electron-hole pair by the conventional single photon absorption process should be negligible. The intensity of the measured photocurrents depends quadratically on the power beam intensity. This clearly shows that they are generated using two-photon absorption process. As in conventional OBIC (Optical Beam Induced Current), the measurements give an image of the electric field distribution in the structure under test, and the minority carrier lifetime can be extracted from the decrease of the photocurrent at the edge of the structure. The extracted minority carrier lifetime of 210 ns is consistent with results obtained in case of single photon absorption.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detection of minority carrier traps in p-type 4H-SiC

Contrarily to the case of n-type 4H-SiC, very little is known about the presence of minority carrier traps in p-type epilayers. In this study, we performed the electrical characterization of as-grown, electron irradiated, and thermally oxidized p-type 4H-SiC, by using minority carrier transient spectroscopy. Four minority carrier traps are reported in 1.6–2.3 eV energy range above the valence band edge (E{sub V}). Particular emphasis is given to the mid-gap minority carrier trap (EH{sub 6∕7}) and to its correlation to an energetically close mid-gap majority carrier trap (HK4)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural effects of field emission from GaN nanofilms on SiC substrates

GaN nanofilms (NFs) with different structures are grown on SiC substrates by pulsed laser deposition under different conditions. The synthesized GaN NFs are studied by X-ray diffraction, field-emission (FE) scanning electron microscopy, X-ray photoelectron spectroscopy, and atomic force microscopy. The GaN NFs are composed of diversified GaN nanoparticles with a diameter of 9–38 nm, thickness of 10–50 nm, and roughness of 0.22–13.03 nm. FE from the GaN NFs is structure dependent, which is explained by stress changing the band gap of the NFs. By structure modulation, the turn-on field of GaN NFs can be as low as 0.66 V/μm at a current density of 1 μA/cm{sup 2}, with a current density of up to 1.1 mA/cm{sup 2} at a field of 4.18 V/μm. Fowler-Nordheim curves of some samples contain multiple straight lines, which originate from the structural change and diversification of GaN nanoparticles under an applied field. Overall, our results suggest that GaN NFs with excellent FE properties can be prepared on SiC substrates, which provides a new route to fabricate high-efficiency FE nanodevices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles calculation on β-SiC(111)/α-WC(0001) interface

The α-WC(0001) surface and β-SiC(111)/α-WC(0001) interface were studied by first-principles calculation based on density functional theory. It is demonstrated that the α-WC(0001) surface models with more than nine atom-layers exhibit bulk-like interior, wherein the surface relaxations localized within the top three layers are well converged. Twenty-four specific geometry models of SiC/WC interface structures with different terminations and stacking sites were chosen. The calculated work of adhesion and interface energy suggest that the most stable interface structure has the C-C bonding across the interface, yielding the largest work of adhesion and the lowest interface energy. Moreover, the top-site stacking sequence is preferable for the C/C-terminated interface. The effects of the interface on the electronic structures of the C/C-terminated interfaces are mainly localized within the first and second layers of the interface. Calculations of the work of adhesion and interface energy provide theoretical evidence that the mechanical failure may initiate at the interface or in SiC but not in WC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fourier transform infrared identification of the ν{sub 5}(σ{sub u}) fundamental of SiC{sub 5}Si

The Fourier transform infrared spectrum of SiC{sub 5}Si was observed by trapping the vapor from the Nd:YAG laser ablation of sintered Si/C rods in solid Ar at ∼20 K. Measurements of {sup 13}C and {sup 29,30}Si isotopic shifts have enabled the identification of the ν{sub 5}(σ{sub u}) vibrational fundamental of the linear isomer of SiC{sub 5}Si at 1590.8 ± 0.2 cm{sup −1}. The results are in excellent agreement with the predictions of density functional theory calculations at the B3LYP/cc-pVDZ level. A second fundamental, ν{sub 4}(σ{sub u}), can only be tentatively identified at 2021.0 cm{sup −1}, because its isotopic shifts are overlapped by absorptions from other species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ monitoring of stacking fault formation and its carrier lifetime mediation in p-type 4H-SiC

Using the fine control of an electron beam (e-beam) in scanning electron microscopy with the capabilities of both electrical and optical imaging, the stacking fault (SF) formation together with its tuning of carrier lifetime was in situ monitored and investigated in p-type 4H-SiC homoepitaxial films. The SFs were formed through engineering basal plane dislocations with the energy supplied by the e-beam. The e-beam intensity required for the SF formation in the p-type films was ∼100 times higher than that in the n-type ones. The SFs reduced the minority-carrier lifetime in the p-type films, which was opposite to that observed in the n-type case. The reason for the peculiar SF behavior in the p-type 4H-SiC is discussed with the cathodoluminescence results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanical properties of Al-Cu alloy-SiC composites

The synthesis of aluminum (Al) alloys, Al-Cu, from mixture 96.2 % Al and 3.8 % Cu has been prepared by melting process at a temperature of 1200°C. The adding 12.5 wt% up to 20 wt% of SiC on Al-Cu alloys samples has been investigated. The structure analyses were examined by X-Ray Diffractometer (XRD) and scanning electron microscope (SEM). Moreover, the morphology of Al-Cu alloys has been seen as structure in micrometer range. The hardness was measured by hardness Vickers method. According to the results, it can be assumed that the 15 wt% of SiC content is prefer content to get better quality of back to back hardness Vickers of Al-Cu alloys.

36 MATERIALS SCIENCE↗

Preparation and electrical transport properties of quasi free standing bilayer graphene on SiC (0001) substrate by H intercalation

We investigate the temperature dependent electrical transport properties of quasi-free standing bilayer graphene on 4H-SiC (0001) substrate. Three groups of monolayer epitaxial graphene and corresponding quasi-free standing bilayer graphene with different crystal quality and layer number homogeneity are prepared. Raman spectroscopy and atomic-force microscopy are used to obtain their morphologies and layer number, and verify the complete translation of buffer layer into graphene. The highest room temperature mobility reaches 3700 cm{sup 2}/V·s for the quasi-free standing graphene. The scattering mechanism analysis shows that poor crystal quality and layer number inhomogeneity introduce stronger interacting of SiC substrate to the graphene layer and more impurities, which limit the carrier mobility of the quasi-free standing bilayer graphene samples.

36 MATERIALS SCIENCE↗

Hydrogen assisted growth of high quality epitaxial graphene on the C-face of 4H-SiC

We demonstrate hydrogen assisted growth of high quality epitaxial graphene on the C-face of 4H-SiC. Compared with the conventional thermal decomposition technique, the size of the growth domain by this method is substantially increased and the thickness variation is reduced. Based on the morphology of epitaxial graphene, the role of hydrogen is revealed. It is found that hydrogen acts as a carbon etchant. It suppresses the defect formation and nucleation of graphene. It also improves the kinetics of carbon atoms via hydrocarbon species. These effects lead to increase of the domain size and the structure quality. The consequent capping effect results in smooth surface morphology and suppression of multilayer growth. Our method provides a viable route to fine tune the growth kinetics of epitaxial graphene on SiC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-dependent analysis of conduction mechanism of leakage current in thermally grown oxide on 4H-SiC

The conduction mechanism of the leakage current of a thermally grown oxide on 4H silicon carbide (4H-SiC) was investigated. The dominant carriers of the leakage current were found to be electrons by the carrier-separation current-voltage method. The current-voltage and capacitance-voltage characteristics, which were measured over a wide temperature range, revealed that the leakage current in SiO{sub 2}/4H-SiC on the Si-face can be explained as the sum of the Fowler-Nordheim (FN) tunneling and Poole-Frenkel (PF) emission leakage currents. A rigorous FN analysis provided the true barrier height for the SiO{sub 2}/4H-SiC interface. On the basis of Arrhenius plots of the PF current separated from the total leakage current, the existence of carbon-related defects and/or oxygen vacancy defects was suggested in thermally grown SiO{sub 2} films on the Si-face of 4H-SiC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Identification of luminescent surface defect in SiC quantum dots

The surface defect that results in the usually observed blue luminescence in the SiC quantum dots (QDs) remains unclear. We experimentally identify that the surface defect C=O (in COO) is responsible for this constant blue luminescence. The HO···C=O [n{sub (OH)} → π*{sub (CO)}] interaction between the hydroxyl and carbonyl groups changes the energy levels of C=O and makes the light absorption/emission arise at around 326/438 nm. Another surface defect (Si–Si) is identified and its light absorption contributes to both C=O-related luminescence and quantum-confinement luminescence of the SiC QDs.

36 MATERIALS SCIENCE↗

A model for thermal oxidation of Si and SiC including material expansion

A model based on drift-diffusion-reaction kinetics for Si and SiC oxidation is discussed, which takes the material expansion into account with an additional convection term. The associated velocity field is determined self-consistently from the local reaction rate. The approach allows a calculation of the densities of volatile species in an nm-resolution at the oxidation front. The model is illustrated with simulation results for the growth and impurity redistribution during Si oxidation and for carbon and silicon emission during SiC oxidation. The approach can be useful for the prediction of Si and/or C interstitial distribution, which is particularly relevant for the quality of metal-oxide-semiconductor electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New X-ray insight into oxygen intercalation in epitaxial graphene grown on 4H-SiC(0001)

Efficient control of intercalation of epitaxial graphene by specific elements is a way to change properties of the graphene. Results of several experimental techniques, such as X-ray photoelectron spectroscopy, micro-Raman mapping, reflectivity, attenuated total reflection, X-ray diffraction, and X-ray reflectometry, gave a new insight into the intercalation of oxygen in the epitaxial graphene grown on 4H-SiC(0001). These results confirmed that oxygen intercalation decouples the graphene buffer layer from the 4H-SiC surface and converts it into the graphene layer. However, in contrast to the hydrogen intercalation, oxygen does not intercalate between carbon planes (in the case of few layer graphene) and the interlayer spacing stays constant at the level of 3.35–3.32 Å. Moreover, X-ray reflectometry showed the presence of an oxide layer having the thickness of about 0.8 Å underneath the graphene layers. Apart from the formation of the nonuniform thin oxide layer, generation of defects in graphene caused by oxygen was also evidenced. Last but not least, water islands underneath defected graphene regions in both intercalated and non-intercalated samples were most probably revealed. These water islands are formed in the case of all the samples stored under ambient laboratory conditions. Water islands can be removed from underneath the few layer graphene stacks by relevant thermal treatment or by UV illumination.

36 MATERIALS SCIENCE↗

Recovery effects due to the interaction between nuclear and electronic energy losses in SiC irradiated with a dual-ion beam

Single and dual-beam ion irradiations of silicon carbide (SiC) were performed to study possible Synergetic effects between Nuclear (S{sub n}) and Electronic (S{sub e}) Energy Losses. Results obtained combining Rutherford backscattering in channeling conditions, Raman spectroscopy, and transmission electron microscopy techniques show that dual-beam irradiation of SiC induces a dramatic change in the final sample microstructure with a substantial decrease of radiation damage as compared to single-beam irradiation. Actually, a defective layer containing dislocations is formed upon dual-beam irradiation (S{sub n} and S{sub e}), whereas single low-energy irradiation (S{sub n} alone) or even sequential (S{sub n} + S{sub e}) irradiations lead to full amorphization. The healing process is ascribed to the electronic excitation arising from the electronic energy loss of swift ions. These results shed new light on the long-standing puzzling problem of the existence of a possible synergy between S{sub n} and S{sub e} in ion-irradiation experiments. This work is interesting for both fundamental understanding of the ion-solid interactions and technological applications in the nuclear industry where recovery S{sub n}/S{sub e} effects may preserve the integrity of nuclear devices.

36 MATERIALS SCIENCE↗

Stability and electronic properties of SiC nanowire adsorbed on MoS{sub 2} monolayer

Structural stability and electronic properties of silicon carbide (SiC) nano-wire on MoS{sub 2} monolayer are investigated within the framework of density functional theory (DFT). The preferred binding site for the SiC nano-wire is predicted to be hollow site of monolayer. In the electronic band structure the states in valence band near Fermi level are mainly due to nano-wire leading to reduction of band gap relative to monolayer. These results provide a platform for their applications in optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferromagnetism in proton irradiated 4H-SiC single crystal

Room-temperature ferromagnetism is observed in proton irradiated 4H-SiC single crystal. An initial increase in proton dose leads to pronounced ferromagnetism, accompanying with obvious increase in vacancy concentration. Further increase in irradiation dose lowers the saturation magnetization with the decrease in total vacancy defects due to the defects recombination. It is found that divacancies are the mainly defects in proton irradiated 4H-SiC and responsible for the observed ferromagnetism.

36 MATERIALS SCIENCE↗

Solid immersion lenses for enhancing the optical resolution of thermal and electroluminescence mapping of GaN-on-SiC transistors

Solid immersion lenses (SILs) are shown to greatly enhance optical spatial resolution when measuring AlGaN/GaN High Electron Mobility Transistors (HEMTs), taking advantage of the high refractive index of the SiC substrates commonly used for these devices. Solid immersion lenses can be applied to techniques such as electroluminescence emission microscopy and Raman thermography, aiding the development device physics models. Focused ion beam milling is used to fabricate solid immersion lenses in SiC substrates with a numerical aperture of 1.3. A lateral spatial resolution of 300 nm is demonstrated at an emission wavelength of 700 nm, and an axial spatial resolution of 1.7 ± 0.3 μm at a laser wavelength of 532 nm is demonstrated; this is an improvement of 2.5× and 5×, respectively, when compared with a conventional 0.5 numerical aperture objective lens without a SIL. These results highlight the benefit of applying the solid immersion lenses technique to the optical characterization of GaN HEMTs. Further improvements may be gained through aberration compensation and increasing the SIL numerical aperture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Activation and control of visible single defects in 4H-, 6H-, and 3C-SiC by oxidation

In this work, we present the creation and characterisation of single photon emitters at the surface of 4H- and 6H-SiC, and of 3C-SiC epitaxially grown on silicon. These emitters can be created by annealing in an oxygen atmosphere at temperatures above 550 °C. By using standard confocal microscopy techniques, we find characteristic spectral signatures in the visible region. The excited state lifetimes are found to be in the nanosecond regime in all three polytypes, and the emission dipoles are aligned with the lattice. HF-etching is shown to effectively annihilate the defects and to restore an optically clean surface. The defects described in this work have ideal characteristics for broadband single photon generation in the visible spectral region at room temperature and for integration into nanophotonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗