Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STAINLESS STEELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

1D Scaling with Ablation for K-Shell Radiation from Stainless Steel Wire Arrays

A 1D Lagrangian magnetohydrodynamic z-pinch simulation code is extended to include wire ablation. The plasma transport coefficients are calibrated to reproduce the K-shell yields measured on the Z generator for three stainless steel arrays of diameter 55 mm and masses ranging from 1.8 to 2.7 mg. The resulting 1D scaling model is applied to a larger SS array (65 mm and 2.5 mg) on the refurbished Z machine. Simulation results predict a maximum K-shell yield of 77 kJ for an 82 kV charging voltage. This maximum drops to 42 kJ at 75 kV charging. Neglecting the ablation precursor leads to a {approx}10% change in the calculated yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessing Stainless Steel Compatibility in Flowing FLiBe Salt

To address the considerable interest in LiF-BeF 2 (FLiBe) compatibility for fission and fusion reactor applications, static and flowing compatibility experiments were conducted to assess the compatibility with type 316H stainless steel. In static testing at 550° and 650 °C, small mass changes were measured and posttest characterization of the FLiBe showed increased levels of Fe, Cr, Ni and Mn in the salt. Adding Be in the static salt test reduced the dissolution of Fe and Ni. Further, an initial assessment of mass transfer in flowing FLiBe without a Be addition was conducted using a monometallic 316H thermal convection loop (TCL) operated for 1000 h with a peak temperature of 650 °C. Similar to prior results in flowing FLiNaK salt, the 316H specimens exhibited small mass losses in the hot leg. Posttest characterization of the 316H specimens suggested Cr surface depletion in the hot and cold legs and possibly Fe deposition in the cold leg. To further understand this behavior, Cr and Fe dissolution was measured in static FLiBe at 550–650 °C.

316H stainless steel↗

Tellurium Corrosion of Type 304/304L Stainless Steel, Iron, Chromium, and Nickel in High-Temperature Liquid Sodium

Investigating tellurium (Te) corrosion on structural materials is crucial for sodium-cooled fast reactors (SFRs) due to radionuclide presence and knowledge gaps. In this study, Type 304/304L stainless steel (SS304), chromium (Cr), iron (Fe), and nickel (Ni) samples were immersed in low-oxygen environments with Te in liquid sodium at 773 K for 30 days. At 10 ppm oxygen, SS304 showed multiple oxide layers, including a compact NaCrO 2 interlayer and porous Na-Fe-Ni-O outer layers. Tellurium penetrated through the porous layers but was hindered by the NaCrO 2 interlayer. At 0.01 ppm oxygen, Cr had no oxide layer, while Fe and Ni had unstable ones. Tellurium-induced pitting was deeper in Fe and Ni compared to Cr. Oxygen levels and Cr composition are critical factors affecting stable oxide compound layer formation and mitigating Te-induced pitting.

36 MATERIALS SCIENCE↗

Investigation of oxygen evolution reaction with Ni foam and stainless-steel mesh electrodes in alkaline seawater electrolysis

We report alkaline seawater electrolysis is a promising method for hydrogen production; however, little progress has been made in investigating the substrates for oxygen evolution reaction (OER) electrocatalysts. Ni foam and stainless-steel mesh (SS mesh) were investigated systematically for OER in alkaline seawater electrolysis in this work. The overpotentials and Tafel slopes with SS meshes are smaller than Ni foams, and it also exhibits excellent stability. Interestingly, the performance of the SS mesh even outperforms various non-noble metal electrocatalysts and is comparable to commercial RuO2 and IrO2. The corrosion conditions of Ni foam and SS mesh electrodes were studied and revealed. Furthermore, the electrochemically active surface area (ECSA) of Ni foam is 12 times higher than SS mesh in the same geometric area, indicating the electrochemical activity of SS mesh is much superior to Ni foam. This work expands on promising substrates for alkaline seawater electrolysis, with cost and performance advantages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of processing parameters and strut dimensions on the microstructures and hardness of stainless steel 316L lattice-emulating structures made by powder bed fusion

In this study, we present the effects of input processing parameters and strut thickness (in square struts) on microstructure and properties in laser powder bed fusion additively manufactured stainless steel 316L lattice-emulating structures. Lattice-emulating X-structures with square cross-sections of 1.5, 1.0, and 0.5 mm were fabricated using three different parameter sets with varying power, speed, and therefore, linear energy density. Grain size and morphology were shown to be dictated by epitaxial growth, which was dependent on weld pool morphology. Additionally, grain size and morphology were shown to change across the thickness direction of the struts (from the bottom inclined surface to the top inclined surface). The spatial variation in grain size was reflected by changes in hardness through the thickness of each strut. The 0.5 mm struts exhibited more significant grain elongation in the strut direction and larger sub-grain solidification cell diameters than their thicker counterparts. The larger sub-grain solidification cell diameters in the 0.5 mm samples resulted in correspondingly lower hardness values when compared to samples of higher thicknesses.

36 MATERIALS SCIENCE↗

Properties of nano structured Ag-TiO{sub 2} composite coating on stainless steel using RF sputtering method

RF Sputtering system is one of the Physical Vapour Deposition (PVD) methods that have been widely used to produce hard coating. This technique is used to deposit thin layers of metallic substrates such as stainless steel (SS). From this process, a good adhesiveness and wear resistance coating can be produced for biomedical applications. In this study, RF sputtering method was used to deposit TiO{sub 2}-Ag composite coatings via various deposition parameters. The parameters are RF power of 350W, gas composition (Ar: O{sub 2}) 50:5 and deposition time at 1, 2, 4 and 6 hours. Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD) and Raman spectroscopy were used to characterize surface area of coated samples. The formation of nanocrystalline thin film and the surface morphology were examined using SEM. The crystallite size of TiO{sub 2}-Ag composite coatings were estimated between 20-60 nm based on XRD analysis using Scherer equation and SEM evaluation. The Raman and XRD results suggested that the structure of the TiO{sub 2}-Ag consist of anatase and rutile phases. It also showed that the intensity of anatase peaks increased after samples undergone annealing process at 500 Degree-Sign C.

36 MATERIALS SCIENCE↗

Additive manufacturing of Zr-based metallic glass structures on 304 stainless steel substrates via V/Ti/Zr intermediate layers

Welding of dissimilar metals is challenging, particularly between crystalline metals and metallic glasses (MGs). Here in this study, Zr 65.7 Cu 15.6 Ni 11.7 Al 3.7 Ti 3.3 (wt%) MG structures were built on 304 stainless steel (SS) substrates by laser-foil-printing (LFP) additive manufacturing technology in which MG foils were laser welded layer-by-layer onto the SS substrate with a transition route, i.e., SS → V → Ti → Zr → MG. The direct welding of MG on SS would lead to the formation of various brittle intermetallics and the consequent peeling off of the welded MG foils from the SS substrate, which could be resolved via the use of V/Ti/Zr intermediate layers. The chemical composition, formed phases, and micro-hardness were characterized in the dissimilar joints by energy dispersive spectroscopy, X-ray diffraction, and micro-indentation. Since the intermediate materials were highly compatible with the base metals or the adjacent intermediate metals, undesirable intermetallics were not detected in the dissimilar joint. The bonding tensile strength between the SS substrate and the MG part with intermediate layers was measured about 477 MPa.

36 MATERIALS SCIENCE↗

Load partitioning and strain-induced martensite formation during tensile loading of a metastable austenitic stainless steel.

In-situ high-energy X-ray diffraction and material modeling are used to investigate the strain-rate dependence of the strain-induced martensitic transformation and the stress partitioning between austenite and {alpha}{prime} martensite in a metastable austenitic stainless steel during tensile loading. Moderate changes of the strain rate alter the strain-induced martensitic transformation, with a significantly lower {alpha}{prime} martensite fraction observed at fracture for a strain rate of 10{sup -2} s{sup -1}, as compared to 10{sup -3} s{sup -1}. This strain-rate sensitivity is attributed to the adiabatic heating of the samples and is found to be well predicted by the combination of an extended Olson-Cohen strain-induced martensite model and finite-element simulations for the evolving temperature distribution in the samples. In addition, the strain-rate sensitivity affects the deformation behavior of the steel. The {alpha}{prime} martensite transformation at high strains provides local strengthening and extends the time to neck formation. This reinforcement is witnessed by a load transfer from austenite to {alpha}{prime} martensite during loading.

36 MATERIALS SCIENCE↗

Phenomenological Constitutive Modeling of High-Temperature Flow Behavior Incorporating Individual and Coupled Effects of Processing Parameters in Super-austenitic Stainless Steel

A novel constitutive model has been developed for predicting flow responses of super-austenitic stainless steel over a wide range of strains (0.05-0.6), temperatures (1173-1423 K) and strain rates (0.001-1 s{sup −1}). Further, the predictability of this new model has been compared with the existing Johnson–Cook (JC) and modified Zerilli–Armstrong (M-ZA) model. The JC model is not befitted for flow prediction as it is found to be exhibiting very high (~ 36%) average absolute error (δ) and low (~ 0.92) correlation coefficient (R). On the contrary, the M-ZA model has demonstrated relatively lower δ (~ 13%) and higher R (~ 0.96) for flow prediction. The incorporation of couplings of processing parameters in M-ZA model has led to exhibit better prediction than JC model. However, the flow analyses of the studied alloy have revealed the additional synergistic influences of strain and strain rate as well as strain, temperature, and strain rate apart from those considered in M-ZA model. Hence, the new phenomenological model has been formulated incorporating all the individual and synergistic effects of processing parameters and a ‘strain-shifting’ parameter. The proposed model predicted the flow behavior of the alloy with much better correlation and generalization than M-ZA model as substantiated by its lower δ (~ 7.9%) and higher R (~ 0.99) of prediction.

36 MATERIALS SCIENCE↗

Systematic study of polycrystalline flow during tension test of sheet 304 austenitic stainless steel at room temperature

By systematic study the mapping of polycrystalline flow of sheet 304 austenitic stainless steel (ASS) during tension test at constant crosshead velocity at room temperature was obtained. The main results establish that the trajectory of crystals in the polycrystalline spatially extended system (PCSES), during irreversible deformation process obey a hyperbolic motion. Where, the ratio between the expansion velocity of the field and the velocity of the field source is not constant and the field lines of such trajectory of crystals become curved, this accelerated motion is called a hyperbolic motion. Such behavior is assisted by dislocations dynamics and self-accommodation process between crystals in the PCSES. Furthermore, by applying the quantum mechanics and relativistic model proposed by Muñoz-Andrade, the activation energy for polycrystalline flow during the tension test of 304 ASS was calculated for each instant in a global form. In conclusion was established that the mapping of the polycrystalline flow is fundamental to describe in an integral way the phenomenology and mechanics of irreversible deformation processes.

36 MATERIALS SCIENCE↗

Room temperature corrosion behaviour of plastically deformed AISI 304 stainless steel by friction stir welding in neutral and acidified chloride solutions

Severe plastic deformation of 304L stainless steel plate was carried out by friction stirring under an isothermal tool temperature at 825°C. The friction stirred zone showed extensive grain refinement, high fraction of low angle grain boundaries due to dislocation rearrangement, Σ3 and Σ9 special grain boundaries and discrete Fe–Cr–Mn-rich particles. Electrochemical polarisation measurements were done on the base metal (BM) and friction stir welded (FSW) specimens in the neutral and acidified 3.5% NaCl solutions. The BM showed marginally better pitting resistance in the neutral chloride solution than the FSW because of a larger fraction of special grain boundaries, and larger grain size. Whereas in acidified 3.5% NaCl solution, the FSW showed better corrosion resistance than the BM. Furthermore, the surface film of the FSW had a lower impedance and a lower defect concentration than the BM indicating higher diffusivity of point defects in the FSW.

36 MATERIALS SCIENCE↗

Dual Atmosphere Isothermal Aging and Rapid Thermal Cycling of Ag-Ni and Ag-CuO Stainless Steel to Zirconia Braze Joints

Silver—copper oxide brazes are commonly used to bond zirconia to stainless steel (SS) for Solid Oxide Fuel Cell (SOFC) and other high temperature joining applications. In fact, conventional Ag-CuO compositions (where Cu segregates to the surface, oxidizes, and reduces the silver wetting angle on zirconia from ~85 to ~40°) allow brazing to be performed in air. Unfortunately, the relatively high ~40° wetting angles of these reactive air brazes, and the ability of SOFC anode gases to reduce the CuO in them, produce pores during SOFC manufacturing and operation that reduce joint strength, impermeability, and longevity. Recently, Ag brazes utilizing transient porous nickel layers, instead of CuO additions, have been shown to produce high quality braze joints between SS and yttria stabilized zirconia (YSZ). Here, the microstructural and compositional evolution of SS|Ag-3CuO|YSZ and SS|Ag-Ni|YSZ braze joints exposed to air on one side and humidified 4%H 2 -96%N 2 on the other side for either ~300 hours of ~750°C aging or ~300 25°C/min 35–830°C rapid thermal cycles are compared. While both brazes display considerable microstructural and compositional evolution, only the Ag-Ni brazes remain pore free and well bonded, indicating that Ag-Ni brazes may be more suitable for long term SOFC operation.

25 ENERGY STORAGE↗

Deployment of CF8C-Plus Cast Stainless Steels

The goal of this project was to accelerate the deployment of a new cast austenitic stainless steel, CF8C Plus, for new energy-relevant applications. The alloy was jointly developed by Oak Ridge National Laboratory (ORNL) and Caterpillar and is a low-cost, high-performance alternative to conventional cast steels and, in some cases, a cost-effective substitute for Ni-base alloys. CF8C-Plus steel won a 2003 R&D 100 Award, was patented in 2006 and was recognized as a new heat-resistant cast alloy grade by ASTM (HG10MNN). In 2006, CF8C-Plus was successfully commercialized for the Caterpillar Regeneration System (CRS) burner housing, which is needed for the operation of the ceramic diesel particular filter required in all on-highway diesel engines. To date, over 500 tons of CF8C-Plus have been cast for this single application. It was anticipated that the demonstrated commercial success in the CRS application could be translated to an expanded range of other transportation and power generation applications. Increased deployment of CF8C-Plus and Cu/W modified CF8C-Plus castings can lead to engines with increased efficiency and durability while lowering cost. Potential industrial partners that were targeted included automotive and diesel engine and part manufacturers as well as turbine, reciprocating engine and boiler manufacturers.

ASME Code Case↗

Nondestructive Modular Leak Detection in 3D Printed 316L Stainless Steel Pipes via Laser Powder Bed Fusion

This research investigates the leak detection features of 316L Stainless Steel pipe structures manufactured via Laser Powder Bed Fusion (LPBF). This work involves the design of a modular sensor system integrating nondestructive evaluation (NDE) methods, including thermal imaging and ultrasonic frequency detection to detect and characterize leaks in components. This aims to improve leak detection sensitivity within medium-pressure gas systems, during continuous operation without halting flow or introducing safety risks. The system could be adaptable for use on unmanned aerial vehicles (UAVs), enabling remote leak detection in active environments. A custom pneumatic system incorporating temperature and pressure sensors was assembled to detect leaks in LPBF-printed 316L SS tee pipes. Experimental results and simulations confirm the system’s effectiveness in leak detection and material evaluation. This research program also integrated a Python-based image recognition platform based on a metallography and optical microscopy to assess the porosity and complement the leak detection data on the printed structures. This allows a detailed analysis of pore distribution and internal leak paths, which could compromise structural integrity, critical for quality control during manufacturing. Findings suggest that the investigated approach holds potential for enhancing leak detection technologies and adapt them for advanced manufactured parts.

36 MATERIALS SCIENCE↗

Repair of weld defects in thin-walled stainless steel tubes

Hand-operated tool repairs weld defects in large-diameter, thin-walled stainless steel tubes. Tool consists of a three-roll external planisher and an internal backup mandrel, both hydraulically pressurized by hand pumps, and an external restraining mandrel, which keeps the tube from turning during the planishing operations.

Fiorelli, F.↗