SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
To prevent fluid leakage around piston seals separating two fluids under differential pressure, a venting system has been devised. Two methods may be used for venting seals through internal passages to an external low-pressure area, O-ring or split-ring seals.
A connector that will serve as a seal for fluids at cryogenic temperatures and in high vacuums was constructed by installing a metal disk between two sets of mating serrations to form two sealing surfaces. Compression on both sealing surfaces is ensured by spring action of the disk.
Positive pressure seal rings seal bolted flange joints in pressure vessels containing fluids whose temperatures can vary over a wide range. The seal rings mate with grooves in the flanges and compensate for the excessive thermal expansion or contraction of a gasketed joint.
Plug assembly seals openings in piping systems, vessels, and chambers for low pressure leak testing. The assembly, which consists of a rubber sealing plug and the mechanism for expanding it into a pressure-tight configuration, adequately seals irregular diameters without damage to mating surfaces.
Protection device for sealed surfaces is placed over the polished surface entrance of trapped bosses and removed when the seal fitting has been engaged with the boss threads. This technique applies to various seal types used in close fitting, spring loaded, threaded fittings.
Seal-off assembly which permits rapid container evacuation using large diameter tubing has a vacuum valve that permits sealing plate transfer from the vacuum valve stem to the container after evacuation. The sealing plate can be reused repeatedly. This device can repump in case of a small leak without exposing the container to the atmosphere.
Study provides specific design criteria in sealing applications for continuous duty pumps used in bulk liquid transfer. A basic sealing equation predicts visco seal performance in the turbulent regime.
Cryogenic seals protect the surfaces of a plastic member in a low-pressure system subjected to extreme temperature changes. The outer seal is an aluminum expansion ring bonded to the lens outer surface and the inner seal consists of a resin-filled aluminum U-ring bonded to the inner surface.
Reinforced fluorocarbon cupseal, which provides an integral lip-type seal, replaces the metal piston rings in piston-cylinder configurations used in the compression of low density gases. The fluorocarbon seal may be used as cryogenic compressor piston seals.
Fluoroplastic material held captive between valve sealing surfaces of 16 to 125 rms microinches provides zero leakage to a high-pressure line at high cryogenic temperatures, when the plastic material is subjected to sufficient stress. This sealing technique makes unnecessary the use of superfinished valve sealing surfaces.
Helical seal is used to seal bolted flange joints in a high temperature environment. The seal design incorporates a new cross-sectional shape, a metal strip with a slight radius, and the use of premolded asbestos. It provides equal load distribution under compression loads, allows for minimum loss and recovery values, and increases the temperature range.
Seal rings reduce cryogenic pump seal leakage under static and dynamic conditions. The rings are fitted into annular diaphragms, which are affected by cryogenic pressure and temperature, to move against a mating ring, to increase seal-bearing loads under static conditions.
Seal, machined from a plastic material, prevents liquid hydrogen leakage from hose connectors. It serves as a block-type seal supporting maximum loading of the poppet with slight elastic deflection or as a lip-type seal that is deformed elastically in bending, tension, or compression by the seated poppet.
Computerized analysis of seal temperature, elastic displacements and seal force balance in iterative design method for gas turbine mainshaft seals
Development of battery terminal seal for sealing electrolyte for periods of three to five years is discussed. Operating conditions of battery are defined. Components of electrolyte seal and method of production are reported. Schematic diagrams of device are included.
Eight different types of cermet seals for thermionic diodes were investigated: (1) 1 micron Al2O3 with Nb spheres; (2) 200 A Al2O3 with Nb spheres; (3) 1 micron Al2O3 with Nb 1% Zr spheres; (4) 200 A Al2O3 with Nb 1% Zr spheres; (5) Pure Y2O3 with Nb 1% Zr spheres; (6) Y2O3 3% ZrO2 with Nb 1% Zr spheres; (7) Y2O3 10% ZrO2 with Nb 1% Zr spheres; and (8) ZrO2 12% Y2O3 with Nb 1% Zr spheres. Investigations were made to determine the most favorable fabrication techniques and the effect of the bonding cycle, (length of bonding time and shutdown sequences). The analysis of the seals included tensile test, vacuum test, electrical test and metallurgical examination. At the conclusion of the development phase, 36 seals were fabricated for delivery for evaluation.
Method maintains cleanliness of joint-sealing surfaces under dust-laden conditions. This is accomplished by keeping seal and sealing surface covered with sliding plastic rings, which slide out of the way when a joint is seated.
Two phases have been completed, of a program whose ultimate objective is the development of an alkali metal resistant, thermal shock resistant, leak-tight, and neutron radiation resistant ceramic-to-metal seal capable of operation at 1200 C for three to five years. The first phase involved the screening of platinum-base, vanadium-base and vanadium-niobium base brazes for the joining of Cb-1Zr or T-111 alloys to high purity alumina. The second phase involved studies of the performance of sealed capsule samples during 5000-hour aging tests at 800, 1000, and 1200 C in high vacuum. Sealed capsules which were made using pure vanadium braze, and were brazed at 1850 C for one minute, survived 64 thermal cycles to 1200 C at the heating/cooling rate of 100 C/minute. Vanadium braze samples survived 5000-hour aging tests at 800, 1000, and 1200 C. One thermally cycled sample survived a subsequent 5000-hour aging period at 1000 C, but another, at 1200 C, did not survive. It was concluded that a pure vanadium braze used to bond high purity alumina to Cb-1Zr alloy is the best of the systems studied, but that additional studies must be performed to establish its service temperature limitations for the desired three to five years' service.