Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “S MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Effect Analysis of Nickel Ferrite (NiFe{sub 2}O{sub 4}) and Titanium Dioxide (TiO{sub 2}) Nanoparticles on CH{sub 4}/CO{sub 2} Gas Permeation Properties of Cellulose Acetate Based Mixed Matrix Membranes

Natural gas processing is very important industrial process. Major component of natural gas is methane, which is an increasingly utilized source of energy due to high thermal efficiency, while carbon dioxide act as an impurity and reduces its calorific value. In this research work, effects of nickel ferrite (NiFe{sub 2}O{sub 4}) and titanium dioxide (TiO{sub 2}) nanoparticles on the permeation properties of carbon dioxide (CO{sub 2}) and methane (CH{sub 4}) in cellulose acetate/polyethylene glycol (CA/PEG) membranes have been investigated. CA/PEG and CA/PEG based mixed matrix membranes (MMMs) are fabricated by using the solution casting method. Concentrations of TiO{sub 2} and NiFe{sub 2}O{sub 4} nanoparticles membranes are varied from 0 to 20 and 0 to 2 wt% respectively. Scanning electron microscope, tensile testing analysis, X-ray diffraction and thermal gravimetric analysis are used to characterize the fabricated membranes. Permeation study of these membranes has shown that in 5 wt%TiO{sub 2} MMMs, the permeability of CO{sub 2} and CH{sub 4} is increased up to 5.75 and 3.75 times as compared to pure polymer. By adding 1.5 wt% NiFe{sub 2}O{sub 4} in the polymer matrix, the permeability of CO{sub 2} and CH{sub 4} has improved up to 3.46 and 2.1 times as compared to pure polymer. It has been observed that the addition of inorganic nanoparticles in a polymer matrix helps to enhance the permeability of gases but it has little effect on CH{sub 4}/CO{sub 2} selectivity.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of Powder Thixoforged Amorphous Ni{sub 55}Nb{sub 35}Si{sub 10}-Reinforced Al Matrix Composites

Powder thixoforging was used to produce amorphous Ni{sub 55}Nb{sub 35}Si{sub 10}-reinforced Al matrix composites from recycled Al powders obtained from ball-milled Al520 end-milled billets. The amorphous reinforcing material was uniformly dispersed in the Al matrix and bonded adequately with it without undesired interfacial reactions. The compressive yield strength of composites with 45% reinforcement content increased 248% to 794 MPa over as-cast samples. The maximum elongation and hardness of samples were 15%, and 60.4 HRA, respectively. The relative density of the unreinforced thixoforged sample was 99.8%, indicating near-perfect compaction of Al powders. The maximum elongation, hardness, and compressive yield strength of thixoforged monolithic matrix alloys were, respectively, 40%, 56.9 HRA, and 747 MPa (a 228% increase in CYS over the cast alloy). In contrast, cold-forged samples showed only 82% increase in compressive yield strength over the as-cast alloy. Powder thixoforging introduced in this study—even without reinforcement—delivers better mechanical properties compared to cold forging most likely due to the refinement and modification of the microstructure during powder ball milling.

36 MATERIALS SCIENCE↗

Wear and Corrosion Behavior of Graphene-Nanoplate-Reinforced Copper Matrix Composites Prepared Through Electrostatic Self-Assembly

Synthesis of graphene nanoplates (GNPs)/copper (Cu) composites is one of the key challenges in the uniform dispersion of GNPs in the Cu matrix because of their density difference. In this work, GNPs/Cu composites are synthesized through electrostatic self-assembly and spark plasma sintering. The GNPs are uniformly dispersed in the Cu matrix. The graphene protective films are formed in the composites to protect the Cu matrix. The antifriction performance of the GNPs/Cu composites is investigated using a ball-on-disk apparatus. The corrosion resistance of the GNPs/Cu composites is estimated using potentiodynamic polarization curves. Wear and corrosion mechanisms are analyzed through scanning electron microscopy with energy-dispersive spectroscopy. The antifriction performance and corrosion resistance of the composites can be significantly improved by adding GNPs.

36 MATERIALS SCIENCE↗

Semiclassical matrix model for quantum chaotic transport with time-reversal symmetry

We show that the semiclassical approach to chaotic quantum transport in the presence of time-reversal symmetry can be described by a matrix model. In other words, we construct a matrix integral whose perturbative expansion satisfies the semiclassical diagrammatic rules for the calculation of transport statistics. One of the virtues of this approach is that it leads very naturally to the semiclassical derivation of universal predictions from random matrix theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modelling wind power spatial-temporal correlation in multi-interval optimal power flow: A sparse correlation matrix approach

The significantly increasing deployment of wind power necessitates that system operation considers the spatial-temporal correlation of power forecast from different wind power plants. How to model this spatial-temporal correlation in the actual system dispatch is challenging. In this paper, a sparse correlation matrix is utilized to efficiently model the spatial-temporal correlation of wind power forecast in the generation dispatch model. A novel, adjustable, and distributionally-robust chance-constrained multi-interval optimal power flow (ADRCC-MIOPF) model is proposed to obtain reliable economic dispatch (ED) solutions. The spatial-temporal correlation of wind power plants power forecasts is represented by the sparse correlation covariance matrix obtained from historical, time series wind power forecast error data. The chance constraints in the ADRCC-MIOPF model are transformed into a set of second-order-cone (SOC) constraints in which an adjustable coefficient in the chance constraints controls the robustness of the ADRCC-MIOPF model to the wind power forecast errors distribution. Case studies performed on the PJM 5-bus system and IEEE 118-bus system verify the proposed method to improve the system security and reduce the cost especially under the high wind penetration levels. All the cases can be solved within several minutes for both the small and large cases which validates the efficiency of the proposed sparse matrix model. In addition, considering the spatial-temporal correlation of wind power forecast and the distributional robustness of wind power forecast error leads to a more reliable economic dispatch with lower system violations.

17 WIND ENERGY↗

Mitochondrial matrix delivery using MITO-Porter, a liposome-based carrier that specifies fusion with mitochondrial membranes

Mitochondria are the principal producers of energy in cells of higher organisms. It was recently reported that mutations and defects in mitochondrial DNA (mtDNA) are associated with various mitochondrial diseases including a variety of neurodegenerative and neuromuscular diseases. Therefore, an effective mitochondrial gene therapy and diagnosis would be expected to have great medical benefits. To achieve this, therapeutic agents need to be delivered into the innermost mitochondrial space (mitochondrial matrix), which contains the mtDNA pool. We previously reported on the development of MITO-Porter, a liposome-based carrier that introduces macromolecular cargos into mitochondria via membrane fusion. In this study, we provide a demonstration of mitochondrial matrix delivery and the visualization of mitochondrial genes (mtDNA) in living cells using the MITO-Porter. We first prepared MITO-Porter containing encapsulated propidium iodide (PI), a fluorescent dye used to stain nucleic acids to detect mtDNA. We then confirmed the emission of red-fluorescence from PI by conjugation with mtDNA, when the carriers were incubated in the presence of isolated rat liver mitochondria. Finally, intracellular observation by confocal laser scanning microscopy clearly verified that the MITO-Porter delivered PI to the mitochondrial matrix.

60 APPLIED LIFE SCIENCES↗

Muscarinic receptor agonists stimulate matrix metalloproteinase 1-dependent invasion of human colon cancer cells

Highlights: Black-Right-Pointing-Pointer Muscarinic receptor agonists stimulated robust human colon cancer cell invasion. Black-Right-Pointing-Pointer Anti-matrix metalloproteinase1 antibody pre-treatment blocks cell invasion. Black-Right-Pointing-Pointer Bile acids stimulate MMP1 expression, cell migration and MMP1-dependent invasion. -- Abstract: Mammalian matrix metalloproteinases (MMPs) which degrade extracellular matrix facilitate colon cancer cell invasion into the bloodstream and extra-colonic tissues; in particular, MMP1 expression correlates strongly with advanced colon cancer stage, hematogenous metastasis and poor prognosis. Likewise, muscarinic receptor signaling plays an important role in colon cancer; muscarinic receptors are over-expressed in colon cancer compared to normal colon epithelial cells. Muscarinic receptor activation stimulates proliferation, migration and invasion of human colon cancer cells. In mouse intestinal neoplasia models genetic ablation of muscarinic receptors attenuates carcinogenesis. In the present work, we sought to link these observations by showing that MMP1 expression and activation plays a mechanistic role in muscarinic receptor agonist-induced colon cancer cell invasion. We show that acetylcholine, which robustly increases MMP1 expression, stimulates invasion of HT29 and H508 human colon cancer cells into human umbilical vein endothelial cell monolayers - this was abolished by pre-incubation with atropine, a non-selective muscarinic receptor inhibitor, and by pre-incubation with anti-MMP1 neutralizing antibody. Similar results were obtained using a Matrigel chamber assay and deoxycholyltaurine (DCT), an amidated dihydroxy bile acid associated with colon neoplasia in animal models and humans, and previously shown to interact functionally with muscarinic receptors. DCT treatment of human colon cancer cells resulted in time-dependent, 10-fold increased MMP1 expression, and DCT-induced cell invasion was also blocked by pre-treatment with anti-MMP1 antibody. This study contributes to understanding mechanisms underlying muscarinic receptor agonist-induced promotion of colon cancer and, more importantly, indicates that blocking MMP1 expression and activation has therapeutic promise to stop or retard colon cancer invasion and dissemination.

60 APPLIED LIFE SCIENCES↗

Effects of matrix metalloproteinase-1 on the myogenic differentiation of bone marrow-derived mesenchymal stem cells in vitro

Highlights: Black-Right-Pointing-Pointer MMP-1 is a member of the zinc-dependent endopeptidase family. Black-Right-Pointing-Pointer MMP-1 has no cytotoxic effects on BMSCs. Black-Right-Pointing-Pointer MMP-1 can promote the myogenic differentiation of BMSCs. Black-Right-Pointing-Pointer MyoD and desmin were chosen as myogenic markers in this study. -- Abstract: Matrix metalloproteinase-1 (MMP-1) is a member of the family of zinc-dependent endopeptidases that are capable of degrading extracellular matrix (ECM) and certain non-matrix proteins. It has been shown that MMP-1 can enhance muscle regeneration by improving the differentiation and migration of myoblasts. However, it is still not known whether MMP-1 can promote the myogenesis of bone marrow-derived mesenchymal stem cells (BMSCs). To address this question, we isolated BMSCs from C57BL/6J mice and investigated the effects of MMP-1 on their proliferation and myogenic differentiation. Our results showed that MMP-1 treatment, which had no cytotoxic effects on BMSCs, increased the mRNA and protein levels of MyoD and desmin in a dose-dependent manner, indicating that MMP-1 promoted myogenic differentiation of BMSCs in vitro. These results suggest that BMSCs may have a therapeutic potential for treating muscular disorders.

60 APPLIED LIFE SCIENCES↗

Matrix stiffness regulate apoptotic cell death in HIV-HCV co-infected hepatocytes: Importance for liver fibrosis progression

Highlights: • HIV-HCV co-infection increases HIV/HCV RNAs levels and apoptosis in hepatocytes. • Fibrotic matrix stiffness enhances HIV/HCV RNAs and apoptosis in hepatocytes. • Apoptotic infected hepatocytes induce pro-fibrotic changes in hepatic stellate cells. HIV-HCV co-infection causes rapid progression of liver fibrosis. These outcomes to liver cirrhosis can be improved, but not stopped by specific antiviral therapies. Due to high significance of HIV-HCV interactions for morbidity and mortality in co-infected patients, our attention was attracted to the multi-component pathogenesis of fibrosis progression as the transition to end-stage liver disease development. In this study, we hypothesize that increased matrix stiffness enhances apoptosis in HCV-HIV-co-infected hepatocytes and that capturing of apoptotic bodies (AB) derived from these infected hepatocytes by hepatic stellate cells (HSC) drives the fibrosis progression. As the source of viruses, JFH1 (HCV genotype 2a) and HIV-1{sub ADA} (either purified or containing in infected macrophage supernatants) were chosen. Using Huh7.5-CYP (RLW) cells and primary human hepatocytes mono-infected with HCV and HIV or co-infected, we have shown that both HCV and HIV RNA levels were increased in co-infected cells, which was accompanied by hepatocyte apoptosis. This apoptosis was attenuated by azidothymidine treatment. The levels of both infections and apoptosis were more prominent in primary hepatocytes cultured on substrates mimicking fibrotic stiffness (24 kPa-stiff) compared to substrates mimicking healthy liver (2.4 kPa-soft). The engulfment of AB from pathogen-exposed hepatocytes activated pro-fibrotic mRNAs in HSC. Overall, the increased matrix stiffness is not only a consequence of liver inflammation/fibrosis, but the condition that further accelerates liver fibrosis development. This is attributed to the switching of HSC to pro-fibrotic phenotype by capturing of excessive amounts of apoptotic HCV- and HIV-infected hepatocytes.

60 APPLIED LIFE SCIENCES↗

Extracellular matrix protein DMP1 suppresses osteogenic differentiation of Mesenchymal Stem Cells

Highlights: • Extracellular matrix protein DMP1 suppresses MSCs osteogenic differentiation. • DMP1 works not only in osteoblasts and osteocytes, but also in MSCs. Mesenchymal Stem Cells (MSCs) are self-renewing and multipotent stem cells which was investigated for diverse clinical applications. However, complex mechanism of MSCs fate determination is still not fully disclosed. Extracellular matrix (ECM) proteins contribute to maintain MSCs stemness by providing extracellular microenvironment. Increasing evidences show that ECM proteins could also regulate the fate of MSCs directly. Dentin matrix protein 1 (DMP1) is an ECM protein enrich in bone tissue and terminal cells, which well-known in promoting osteoblasts and osteocytes maturation, and facilitate mineralization. Recently, our experiment indicated that DMP1 was also expressed in MSCs of long bone. In present study, it is found that DMP1 expressed in Prx1 positive MSCs. And, DMP1 is down-regulated in early osteoblasts and up-regulated again in mature osteoblasts. DMP1 conditional knockout mice model under Prx1cre was generated to explore whether DMP1 regulates MSCs osteogenic differentiation. Specific ablation of DMP1 in Prx1 positive MSCs increased bone mass in vivo and promoted osteoblasts activity in vitro. This study provides a new understanding of DMP1's function in regulation of osteogenesis: not only an enhancer of bone formation, but also a negative regulator of MSCs differentiation in bone.

60 APPLIED LIFE SCIENCES↗

Regeneration of the oesophageal muscle layer from oesophagus acellular matrix scaffold using adipose-derived stem cells

Highlights: • Production of acellular matrix was achieved with complete removal of nuclear material but retaining collagen. • Human adipose-derived stem cells could attach and adhere to decellularized oesophageal acellular matrix. • Cells survived and proliferated for at least 7 days and oxygen level did not affect the proliferative capacity. This study explored the feasibility of constructing a tissue engineered muscle layer in the oesophagus using oesophageal acellular matrix (OAM) scaffolds and human aortic smooth muscle cells (hASMCs) or human adipose-derived stem cells (hASCs). The second objective was to investigate the effect of hypoxic preconditioning of seeding cells on cell viability and migration depth. Our results demonstrated that hASMCs and hASCs could attach and adhere to the decellularized OAM scaffold and survive and proliferate for at least 7 days depending on the growth conditions. This indicates adipose-derived stem cells (ASCs) have the potential to substitute for smooth muscle cells (SMCs) in the construction of tissue engineered oesophageal muscle layers.

60 APPLIED LIFE SCIENCES↗

A matrix-free hyperviscosity formulation for high-order ALE hydrodynamics

The numerical approximation of compressible hydrodynamics is at the core of high-energy density (HED) multiphysics simulations as shocks are the driving force in experiments like inertial confinement fusion (ICF). In this work, we describe our extension of the hyperviscosity technique, originally developed for shock treatment in finite difference simulations, for use in arbitrarily high-order finite element methods for Lagrangian hydrodynamics. Hyperviscosity enables shock capturing while preserving the high-order properties of the underlying discretization away from the shock region. Specifically, we compute a high-order term based on a product of the mesh length scale to a high power scaled by a hyper-Laplacian operator applied to a scalar field. We then form the total artificial viscosity by taking a non-linear blend of this term and a traditional artificial viscosity term. We also present a matrix-free formulation for computing the finite element based hyper-Laplacian operator. Such matrix-free methods have superior performance characteristics compared to traditional full matrix assembly approaches and offer advantages for GPU based HPC hardware. We demonstrate the numerical convergence of our method and its application to complex, multi-material ALE simulations on high-order (curved) meshes.

97 MATHEMATICS AND COMPUTING↗

Crashworthiness characteristics of a carbon fiber reinforced dual-phase epoxy–polyurea hybrid matrix composite

In this paper, the crashworthiness characteristics of rectangular tubes made from a Carbon-fiber reinforced Hybrid-Polymeric Matrix (CHMC) composite were investigated using quasi-static and impact crush tests. The hybrid matrix formulation of the CHMC was created by combining an epoxy-based thermosetting polymer with a lightly crosslinked polyurea elastomer at various cure-time intervals and volumetric ratios. The load–displacement responses of both CHMC and carbon-fiber reinforced epoxy (CF/epoxy) specimens were obtained under various crushing speeds; and crashworthiness parameters, such as the average crushing force and specific energy absorption (SEA), were calculated using subsequent load–displacement relationships. The CHMC maintained a high level of structural integrity and post-crush performance, relative to traditional CF/epoxy. The influence of the curing time and volumetric ratios of the polyurea/epoxy dual-hybridized matrix system on the crashworthiness parameters was also investigated. The results reveal that the load carrying capacity and total energy absorption tend to increase with greater polyurea thickness and lower elapsed reaction curing time of the epoxy although this is typically a function of the loading rate. In conclusion, the mechanism by which the CHMC provides increased damage tolerance was also investigated using scanning electron microscopy (SEM).

36 MATERIALS SCIENCE↗

The Geocybernetic Assessment Matrix (GAM) — A new assessment tool for evaluating the level and nature of sustainability or unsustainability

Evaluating sustainability from EIA-based assessments has been problematic at best. This is due to the use of reductionist and qualitative approaches which is dependent upon the perspective of the assessor(s). Therefore, a more rigorous and holistic approach is required to evaluate sustainability in a more consistent way. In this paper, a matrix-based methodology in order to assess the indicated level and nature of sustainability for any project, policy, indicators, legislation, regulation, or other framework is described. The Geocybernetic Assessment Matrix (GAM) is designed to evaluate the level and nature of sustainability or unsustainability occurring in respect the fundamental and complex geocybernetic paradigms. The GAM method is described in detail in respect to the theory behind it and the methodology. The GAM is then demonstrated using an appropriate case study — Part 1 of the UK Climate Change Act (2008) concerning carbon budgets and targets. The results indicate that the Part 1 of Act may not achieve the desired goals in contributing towards sustainable development through the stated mechanisms for carbon budgets and targets. The paper then discusses the broader context of the GAM with respect to the core themes evident in the development and application of the GAM of: sustainability science; sustainability assessment; application value of the GAM; and future research and development. - Highlights: • A new assessment tool called the Geocybernetic Assessment Matrix (GAM) described. • GAM evaluates the level and nature of sustainability or unsustainability. • GAM demonstrated by application to Part 1 of the UK Climate Change Act (CCA). • Part 1 of CCA has significant flaws in achieving a sustainable pathway. • GAM offers a potentially useful tool for quantitatively evaluating sustainability.

54 ENVIRONMENTAL SCIENCES↗

Efficient modeling of optically-complex, non-coplanar exterior shading: Validation of matrix algebraic methods

It has long been established that shading windows with overhangs, fins, and other types of non-coplanar systems (NCS) is one of the most effective ways of controlling solar heat gains in buildings because they intercept solar radiation prior to entry into the building. Designers however often specify non-opaque materials (e.g., louvers, fritted glass, expanded metal mesh) for these systems in order to admit daylight, reduce lighting energy use, and improve indoor environmental quality. Most simulation tools rely on geometric calculations and radiosity methods to model the solar heat gain impacts of NCS and cannot model optically-complex materials or geometries. For daylighting analysis, optically-complex NCS can be modeled using matrix algebraic methods, although time-efficient parametric analysis has not yet been implemented. Determining the best design and/or material for static or operable NCS that minimize cooling, heating, and lighting energy use and peak demand requires an iterative process. This study describes and validates a matrix algebraic method that enables parametric energy analysis of NCS. Such capabilities would be useful not only for design but also for development of prescriptive energy-efficiency standards, rating and labeling systems for commercial products, development of design guidelines, and development of more optimal NCS technologies. A facade or “F” matrix, which maps the transfer of flux from the NCS to the surface of the window, is introduced and its use is explained. A field study was conducted in a full-scale outdoor testbed to measure the daylight performance of an operable drop-arm awning. Simulated data were compared to measured data in order to validate the models. Results demonstrated model accuracy: simulated workplane illuminance was within 11–13%, surface luminance was within 16–18%, and the daylight glare probability was within 6–9% of measured results. Methods used to achieve accurate results are discussed. Results of the validation of daylighting performance are applicable to solar heat gain performance. Since exterior shading can also significantly reduce peak demand, these models enable stakeholders to more accurately assess HVAC and lighting impacts in support of grid management and resiliency goals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Synthesis and characterization of zirconia-magnesia inert matrix fuel: Uranium homolog studies

X-ray powder diffraction, X-ray fluorescence, microscopy, X-ray absorption fine structure, and electron probe microanalysis were used to characterize ZrO 2 –MgO inert matrix fuel containing UO 2 (as a fissile element and a Pu homolog) and Er 2 O 3 as a burnable poison. A large composition range of MgO and ZrO 2 was evaluated to determine total concentrations, local environment, phases present, phase mixing, and phase composition. It was found that most compositions of the material consist of two phases: MgO (periclase) and ZrO 2 (cubic zirconia). The zirconia phase incorporates up to 5% (wt/wt) MgO and up to 20% and 10% (wt/wt) UO 2 and Er 2 O 3 respectively. This allows the fissile material and burnable poison to be incorporated into the zirconia crystal structure and defines the limits of this isomorphic substitution. The bond deformation due to the isomorphic substitution of uranium was determined by X-ray absorption fine structure. The MgO phase remains pure, which will enable design optimization of the overall thermophysical properties of the inert matrix fuel in regard to thermal diffusivity and thermal conductivity. This characterization data will be used in future studies to correlate the dissolution behavior of inert matrix material containing plutonium.

Holliday, Kiel↗

Pronounced matrix effect in YbMo{sub 2}Al{sub 4}-type Ca(Au{sub x}Zn{sub 2−x})Au{sub 4} (x=0.09–0.89)

Electron-poor polar intermetallics Ca(Au{sub x}Zn{sub 2−x})Au{sub 4} have been synthesized through fusion of stoichiometric metals in sealed tantalum tubes at 800 °C and annealing at 400 °C for one week. Single crystal X-ray diffraction analyses reveal that this phase belongs to the YbMo{sub 2}Al{sub 4}-type structure (I4/mmm, Pearson symbol tI14), a≈6.943–7.017 Å, c≈5.278–5.286 Å, Z=2, with homogeneous composition range of x=0.09(1)–0.89(1). The structure exhibits a three-dimensional framework of (Au{sub 8}){sub 1/2} featuring square and octagonal channels extending in c, in which Ca and the infinite linear chains of [(Au,Zn){sub 2}]{sub 1/2} are located, respectively. Mulliken population analyses demonstrate that Zn prefers to form the linear chains in the whole homogeneous composition range, consistent with experimental observations. Crystal orbital Hamilton population (COHP) analyses reveal that the channel-to-chain Au–Zn contact has strong bonding interactions regardless of its large interatomic distance (∼2.85 Å), a signature of pronounced matrix effect. The last mentioned effect in YbMo{sub 2}Al{sub 4}-type structures is expected in case the linear chains are defined by small size atoms. - Graphical abstract: Pronounced matrix effect incurred by Au–Au bonding within the gold substructure in Ca(Au{sub x}Zn{sub 2−x})Au{sub 4} results in an elongation of the channel-to-chain Au–Zn interatomic distance without weakening bonding interactions. - Highlights: • The complete solid solution of Ca(Au{sub x}Zn{sub 2−x})Au{sub 4} was accomplished. • Site preference was explained by “coloring” analyses. • Abnormally large Au–Zn distance but with strong bonding was observed. • Pronounced matrix effect incurred by Au–Au bonding in gold substructure was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray tomography investigation of intensive sheared Al–SiC metal matrix composites

X-ray computed tomography (XCT) was used to characterise three dimensional internal structure of Al–SiC metal matrix composites. The alloy composite was prepared by casting method with the application of intensive shearing to uniformly disperse SiC particles in the matrix. Visualisation of SiC clusters as well as porosity distribution were evaluated and compared with non-shearing samples. Results showed that the average particle size as well as agglomerate size is smaller in sheared sample compared to conventional cast samples. Further, it was observed that the volume fraction of porosity was reduced by 50% compared to conventional casting, confirming that the intensive shearing helps in deagglomeration of particle clusters and decrease in porosity of Al–SiC metal matrix composites. - Highlights: • XCT was used to visualise 3D internal structure of Al-SiC MMC. • Al-SiC MMC was prepared by casting with the application of intensive shearing. • SiC particles and porosity distribution were evaluated. • Results show shearing deagglomerates particle clusters and reduces porosity in MMC.

36 MATERIALS SCIENCE↗