Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Relative accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

HLPW-4/GMGW-3: High-Order Discretization Technology Focus Group Workshop Summary

This paper summarizes the High-Order Technical Focus Group (HO-TFG) submissions for the joint 4th AIAA High Lift Prediction (HLPW-4) and 3rd Geometry and Mesh Generation Workshop (GMGW-3). The goal of the workshop was to assess the state-of-the-art in mesh generation and computational fluid dynamics software. The Common Research Model High-Lift (CRM-HL) variant served as the primary focus of the workshop, and a two-dimensional airfoil section from the CRM-HL was used as a verification test case. Here, the HO-TFG was tasked with generating high-order curved meshes for both geometries, and computing high-order solutions using both Reynolds-averaged Navier–Stokes and scale-resolving formulations. While limited by computational resources, the final results demonstrate the potential of higher-order methods to increase solution accuracy with a lower degree-of-freedom count relative to second-order discretizations.

42 ENGINEERING↗
DOE OSTI2022

A Robust Protocol for Entropy Measurement in Mesoscopic Circuits

Previous measurements utilizing Maxwell relations to measure change in entropy, S, demonstrated remarkable accuracy in measuring the spin-1/2 entropy of electrons in a weakly coupled quantum dot. However, these previous measurements relied upon prior knowledge of the charge transition lineshape. This had the benefit of making the quantitative determination of entropy independent of scale factors in the measurement itself but at the cost of limiting the applicability of the approach to simple systems. To measure the entropy of more exotic mesoscopic systems, a more flexible analysis technique may be employed; however, doing so requires a precise calibration of the measurement. Here, we give details on the necessary improvements made to the original experimental approach and highlight some of the common challenges (along with strategies to overcome them) that other groups may face when attempting this type of measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Mounted Accelerometer Frequency Response of Adhesive Products and Aluminum Frame Quick Mounts

An accelerometer mounting technique has large implications on the frequency range and accuracy of the measurement, with stiffness and the mass relative to the monitored structure as the primary concerns. The International Organization for Standardization (ISO) gives an extensive list in 5348:2021, detailing mounting methods, and provides recommendations for testing mounts that are not specifically defined. In the nuclear industry on the laboratory scale, there is a need for vibration measurements for predictive maintenance and process monitoring that are nondestructive and capable of working in high-temperature environments. Commercial adhesive products with easy application and removal were tested as nondestructive methods, while quick mounts to a commonly used aluminum frame were tested as nondestructive and have potential applicability in high-temperature environments. The sinusoidal excitation method was used, measuring frequencies from 50 Hz to 10 kHz in one-third octave band intervals, utilizing three accelerometers and comparing the results to those obtained with the stud-mounting method. Using the lowest ±3 dB threshold across each accelerometer, foam dots and poster strips were not successful, and foam tapes were accurate up to 2000 Hz, hose clamps and zip ties up to 800 Hz, and a custom 3D printed mount up to 1000 Hz. Knowing the limitations of each mounting technique allows for accurate measurements within the appropriate range.

47 - OTHER INSTRUMENTATION↗
DOE OSTI2021

Analytic continuation of noisy data using Adams Bashforth residual neural network

We propose a data-driven learning framework for the analytic continuation problem in numerical quantum many-body physics. Designing an accurate and efficient framework for the analytic continuation of imaginary time using computational data is a grand challenge that has hindered meaningful links with experimental data. The standard Maximum Entropy (MaxEnt)-based method is limited by the quality of the computational data and the availability of prior information. Also, the MaxEnt is not able to solve the inversion problem under high level of noise in the data. Here we introduce a novel learning model for the analytic continuation problem using a Adams-Bashforth residual neural network (AB-ResNet). Additionally, the advantage of this deep learning network is that it is model independent and, therefore, does not require prior information concerning the quantity of interest given by the spectral function. More importantly, the ResNet-based model achieves higher accuracy than MaxEnt for data with higher level of noise. Finally, numerical examples show that the developed AB-ResNet is able to recover the spectral function with accuracy comparable to MaxEnt where the noise level is relatively small.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1971

On strain energy and constitutive relations for alkali metals.

An expression for the strain energy as a continuous differentiable function of the Green-Cauchy deformation tensor is obtained for the alkali metals at absolute zero temperature. The development is based on well established quantum and classical calculations of the various contributions to the crystal energy. Stress-deformation relations are next obtained. As a check on the accuracy of the strain energy, theoretical calculations of the values of the second-order elastic coefficients are obtained and compared to known experimental data. The predicted values are shown to compare quite well with the experimental values.

Eftis, J.↗
NASA NTRS1973

Transient characteristics of simple systems to modulated random noise.

Discussed are the mean-square response exceedance characteristics of a single-tuned system to amplitude modulated noise. The results bear on the accuracy of spectral estimates of nonstationary data, and subsequently, relate directly to the design, analysis, and testing of structural systems in environments as gusts, earthquakes, and ignition transients. For noise correlated as an exponentially damped cosine, the nonstationary response may exceed its stationary value by a factor in excess of two. A time-varying shaping filter explanation is offered for this behavior. For white noise, such exceedances do not occur.

Barnoski, R. L.↗
NASA NTRS1974

Digital temperature sensor performance assessment report

Performance assessment data accumulated during exposure of the digital temperature sensor to simulated shuttle flight type environments are presented. The test parameters were specifically designed to check the sensor for its: (1) ability to resolve temperature relative to the design specifications; (2) ability to maintain accuracy after interchanging the temperature probes with each electronics interface assembly; (3) stability (i.e., satisfactory operation and accuracy during and after exposure to flight environments); and (4) repeatability, or its ability to produce the same output on subsequent exposures to the identical stimulus. Equipment list, test descriptions, data summary, and conclusions are included.

Canniff, J. H.↗
NASA NTRS1975

Evaluation of LANDSAT-2 (ERTS) images applied to geologic structures and mineral resources of South America

The author has identified the following significant results. Work with the Image 100 clearly demonstrates that radiance values of LANDSAT data can be used for correlation of geologic formations across international boundaries. The Totora Formation of the Corocoro Group of Tertiary age was traced from known outcrops near Tiahuanaco, Bolivia, along the south side of Lake Titicaca westward into Peru where the same rocks are considered to be Cretaceous in age. This inconsistency suggests: (1) that a review of this formation is needed by joint geological surveys of both countries to determine similarities, differences, and the true age; (2) that recognition of the extension of the copper-bearing Totora Formation of Bolivia into Peru may provide Peru with a new target for exploration. Equal radiance maps made by use of the Image 100 system show as many as eight different units within salar deposits (salt flats) of the Bolivian Altiplano. Standard film processed images show them as nearly uniform areas of white because of lack of dynamic range in film products. The Image 100 system, therefore, appears to be of great assistance in subdividing the salt flats on the basis of moisture distribution, surface roughness, and distribution of windblown materials. Field work is needed to determine these relationships to mineral composition and distribution. Images representing seasonal changes should also improve the accuracy of such maps. Radiance values of alteration zones related to the occurrence of porphyry copper ores were measured at the San Juan del Abra deposit of northern Chile using the Image 100 system. The extent to which these same values may be used to detect similar alteration zones in other areas has not yet been tested.

Carter, W. D.↗
NASA NTRS1981

Orbit improvement of the satellites of the outer planets

Data reduced from 127 plates showing Jupiter's and Saturn's satellites in the interval 1972 to 1974 are available on computer cards in the form of (O-C) residuals. Initial orbit calculations and several later orbit improvements for Jupiter XIII (Leda) culminated in an extended ephemeris for Leda to the year 2000. The possible existence of several small satellites just outside Saturns rings was predicted. De Sitter's incomplete theory for the motion of the Galilean satellites was reviewed and an outline for a revised, complete theory was developed. Observations of nearly 100 relative positions of the Galilean satellite with a mean accuracy of about 100 km (0.03 arc sec) were used to improve Sampson's theory for these satellites. Results were published on (1) a long term upper limit to Jupiter's orbital eccentricity; (2) deviation of an accurate modern value of the ellipticity of Uranus from balloon-borne images and consequent evaluation of the planet's rotation rate; and (3) identification of features in Saturn's rings as produced by heretofore undetected tesseral harmonics of Saturn's gravitational field.

Aksnes, K.↗
NASA NTRS1983

A Southern Hemisphere VLBI Survey on a 275-km Baseline

A very long base interferometry (VLBI) survey at 2.29 GHz was conducted using a 275 km baseline consisting of the NASA Deep Space Network tracking site in Tidbinbilla, Australia, and the 64 m antenna located at Parkes, Australia. The purpose of the survey was to identify sources in the southern sky possessing strong compact cores ( 0.1 arcseconds). Such sources will be used to form a reference frame for conducting VLBI geodesy experiments in the Southern Hemisphere. The 70 candidate sources were chosen to be south of -39 degrees declination, and only four had been previously observed from the northern hemisphere. Of the observed sources, 49 were found to have compact structure. In addition to determining correlated flux densities, the delay and delay rate observables of several detected sources were used to determine an estimate of the three dimensional location of the Parkes antenna relative to the Tidbinbilla site with a 1-sigma accuracy of 10 meters.

Morabito, D. D.↗
NASA NTRS1986

Numerical simulation of backward step and jet exhaust flows

Preparatory to a continuing study of efficient, high resolution flow structure capture on patched mesh systems, turbulent flowfield solutions for a tactical missile base flow problem are computed on two first level composite grids of differing topologies. One mesh is of the wraparound character and the other is a step mesh on the Cartesian topology. A simplified Baldwin-Lomax algebraic eddy viscosity model is applied in the wake region. Results for the two meshes are compared with each other and with other computations reported in the literature. The totality of results suggest both mesh topology and resolution are important factors in the accuracy of predictive results as well as turbulence modeling. Related to interests in high altitude laminar flows bluff bodies such as the AOTV, the paper also presents results from a solution from laminar flow over a backward facing step and makes comparison with the available classical experiment of Chapman, et al.

Lombard, C. K.↗
NASA NTRS1987

Performance analysis of the multichannel astrometric photometer

It has been proposed that extrasolar planetary systems may be observed if perturbations in star position due to the orbit of Jupiter-type planets could be detected. To see this motion, high accuracy measurements of 0.01 milliarcsecond are required over a relatively large field of view. Techniques using a moving Ronchi grating have been proposed for this application and have been successful in ground-based lower resolution tests. The method may have application to other precision angular measurement problems. This paper explores the theoretical description of the method, considers certain of the error sources, and presents a preliminary calculation of the performance which may be achieved.

Huang, Chunsheng↗
NASA NTRS1992

Geometric distortion analysis of a wide-field astrograph

Ground-based optical navigation seeks to determine the angular position of a star, Solar System body, or laser-emitting spacecraft relative to objects with well-known coordinates. Measurement accuracies of 25 nrad would make optical techniques competitive with current radio metric technology. This article examines a proposed design for a wide-field astrograph and concludes that the deviation of an image centroid from the ideal projection can be modeled to the desired accuracy provided that the field of view does not exceed 5 deg on a side.

Owen, W. M., Jr.↗
NASA NTRS1993

Conjugate gradient based projection - A new explicit methodology for frictional contact

With special attention towards the applicability to parallel computation or vectorization, a new and effective explicit approach for linear complementary formulations involving a conjugate gradient based projection methodology is proposed in this study for contact problems with Coulomb friction. The overall objectives are focussed towards providing an explicit methodology of computation for the complete contact problem with friction. In this regard, the primary idea for solving the linear complementary formulations stems from an established search direction which is projected to a feasible region determined by the non-negative constraint condition; this direction is then applied to the Fletcher-Reeves conjugate gradient method resulting in a powerful explicit methodology which possesses high accuracy, excellent convergence characteristics, fast computational speed and is relatively simple to implement for contact problems involving Coulomb friction.

Tamma, Kumar K.↗
NASA NTRS1994

Comparison of recalculated Dobson and TOMS total ozone at Hradec Kralove, Czechoslovakia, 1978-1990

The reevaluated Dobson total ozone data from Hradec Kralove, Czechoslovakia were compared with independent Total Ozone Mapping Spectrophotometer (TOMS) 'version 6' data set. The comparison was performed by means of the parallel daily averages of ground-based and satellite total ozone pairs of the period November 1978 to December 1990. The comparison showed slight differences between both data series. Their average relative difference is 0.48 percent. The similar results have been reached for subsets of direct sun and zenith types of measurements as well. Their relative differences are 0.61 percent and 0.11 percent respectively. These facts indicate not only good mutual relation of both data sources but also reliability and accuracy of the zenith charts of the spectrophotometer No. 74 used at Hradec Kralove. Preliminary assessment of seasonal MU-dependence of the differences between Dobson and TOMS data was made while using total ozones of winter and summer months representing values of MU=2.70-5.20 and MU = 1.12-1.30 respectively. The results did not show systematic underestimation or overestimation of total ozone due to MU-dependence of the instrument at Hradec Kralove in both seasons.

Stanek, Martin↗
NASA NTRS1996

Semiconductor Laser Low Frequency Noise Characterization

This work summarizes the efforts in identifying the fundamental noise limit in semiconductor optical sources (lasers) to determine the source of 1/F noise and it's associated behavior. In addition, the study also addresses the effects of this 1/F noise on RF phased arrays. The study showed that the 1/F noise in semiconductor lasers has an ultimate physical limit based upon similar factors to fundamental noise generated in other semiconductor and solid state devices. The study also showed that both additive and multiplicative noise can be a significant detriment to the performance of RF phased arrays especially in regard to very low sidelobe performance and ultimate beam steering accuracy. The final result is that a noise power related term must be included in a complete analysis of the noise spectrum of any semiconductor device including semiconductor lasers.

SEMICONDUCTOR LASERS↗
NASA NTRS2004

Survey of Temperature Measurement Techniques For Studying Underwater Shock Waves

Several optical methods for measuring temperature near underwater shock waves are reviewed and compared. The relative merits of the different techniques are compared, considering accuracy, precision, ease of use, applicable temperature range, maturity, spatial resolution, and whether or not special additives are required.

Danehy, Paul M.↗