Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Receivers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Environmental control of lunar samples in the Lunar Receiving Laboratory

The contamination controls used in the Lunar Receiving Laboratory during the processing of lunar samples are described. Initially, the lunar sample containers were opened and the material was examined in a vacuum complex with approximated lunar surface conditions. The process of examining and distributing the samples from this vacuum complex was time consuming. During both Apollo 11 and 12 missions portions of the lunar samples were processed for allocation in a small sterile glove box in a dry nitrogena atmosphere. After Apollo 12 a new system was installed based upon the experience gained from the small glove box. The system uses dry nitrogen as an environmental blanket and has the capability of being sterilized and of maintaining this sterility.

Reynolds, M. A.↗

Optical antenna gain. II - Receiving antennas

Expressions are developed for the gain of a centrally obscured, circular optical antenna used as the collecting and focusing optics in a laser receiver, involving losses due to (1) incoming light blockage by central obscuration, (2) energy spillover at the detector, and (3) the effect of local oscillator distribution in the case of heterodyne or homodyne detection. Numerical results are presented for direct detection and for three types of local oscillator distribution (uniform, Gaussian, and matched).

Degnan, J. J.↗

Low-noise K(u)-band receiver input system

Improved maser and superconducting magnet, which operates in vacuum of closed-cycle helium refrigerator, comprise a low-noise, reliable, field-operational receiver input system.

Berwin, R. W.↗

Flight evaluation: Ohio University omega receiver base

A flight evaluation is presented of the Ohio University Omega Receiver Base, developed under the NASA Tri-University Program in Air Transportation, to provide a vehicle for the transfer of flight-test data to NASA and to other participants in the Tri-University program. Chart recordings of flight data are given, along with chronological listings of significant events which occurred during the flight. Digital data was prepared in data-processing card form for distribution. Data include phase measurements from all eight Omega time-slots for the duration of the flight, plus event marks which serve to correlate the phase data with flight-path documentation.

Chamberlin, K. A.↗

Digital receiver simulation

Digital simulation of the data link for the Saturn-Uranus spacecraft design is summarized. The data link is a 40 watt, 400 MegaHertz, 44 bit-a-second link, a power starved link, and uses convolution coding. Aspects of the link of particular interest are atmospheric scintillation and the Doppler to data rate ratio. The major characteristics of the scintillation are modeled in terms of tapped delay lines. A candidate system design and receiver design is developed. A computer flow diagram depicting a routine for the error rate and one for acquisition is presented. Various coding algorithms are analyzed since the convolution code is sensitive to the distribution of error and the actual pattern of the error.

Hinrichs, C.↗

A simulation analysis of phase processing circuitry in the Ohio University Omega receiver prototype

A FORTRAN IV simulation study of the all-digital phase-processing circuitry is described. A digital phase-lock loop (DPLL) forms the heart of the Omega navigation receiver prototype, and through the DPLL, the phase of the 10.2 KHz Omega signal was estimated when the true signal phase is contaminated with noise. The DPLL uses a frequency synthesizer as the reference oscillator. The synthesizer is composed of synchronous rate multipliers (SRM's) driven by a temperature-compensated crystal oscillator, and the use of the SRM's in this application introduces phase jitter which degrades system performance. Simulation of the frequency synthesizer discussed was to analyze the circuits on a bit-by-bit level in order to evaluate the overall design, to see easily the effects of proposed design changes prior to actual breadboarding, to determine the optimum integration time for the DPLL in an environment typical of general aviation conditions, and to quantify the phase error introduced by the SRM synthesizer and examine its effect on the system.

Palkovic, R. A.↗

Personnel techniques necessary to maximize bio-barrier integrity at a Martian receiving laboratory

The planning of biological isolation measures for the Mars Surface Sample Return Mission is discussed in terms of personnel and organizational management. Deficiencies in past operation of the Lunar Receiving Laborator are analyzed. It was found that the failure to clearly define relationship among the government agencies involved and to effectively integrate their objectives and responsibilities was a major cause of Laboratory deficiencies. Possible solutions to these problems are presented for application to future missions.

Michaelson, G. S.↗

Biased-circuit digital data line receiver

Modified-interface circuit, consisting of input diodes, current sources, and emitter followers, transfers data between digital electronic equipment and also aids circuit isolation when driver and all receivers but one are not powered. Circuit rejects spurious noise signals without impeding valid signal transfer.

Fitzgerald, F. C.↗

Binary phase lock loops for simplified OMEGA receivers

A sampled binary phase lock loop is proposed for periodically correcting OMEGA receiver internal clocks. The circuit is particularly simple to implement and provides a means of generating long range 3.4 KHz difference frequency lanes from simultaneous pair measurements.

Burhans, R. W.↗

Simplified OMEGA receivers

The details are presented of methods for providing OMEGA navigational information including the receiver problem at the antenna and informational display and housekeeping systems based on some 4 bit data processing concepts. Topics discussed include the problem of limiters, zero crossing detectors, signal envelopes, internal timing circuits, phase counters, lane position displays, signal integrators, and software mapping problems.

Burhans, R. W.↗

The mini-O, a digital superhet, or a truly low-cost Omega navigation receiver

A quartz tuning fork filter circuit and some unique CMOS clock logic methods provide a very simple OMEGA-VLF receiver with true hyperbolic station pair phase difference outputs. An experimental system was implemented on a single battery-operated circuit board requiring only an external antenna preamplifier, and LOP output recorder. A bench evaluation and preliminary navigation tests indicate the technique is viable and can provide very low-cost OMEGA measurement systems. The method is promising for marine use with small boats in the present form, but might be implemented in conjunction with digital microprocessors for airborne navigation aids.

Burhans, R. W.↗

Hardware simulation of Ku-band spacecraft receiver and bit synchronizer, volume 1

A hardware simulation which emulates an automatically acquiring transmit receive spread spectrum communication and tracking system and developed for use in future NASA programs involving digital communications is considered. The system architecture and tradeoff analysis that led to the selection of the system to be simulated is presented.

Lindsey, W. C.↗

Simulation and modeling of the deep space receiver interaction with channel decoding performance

Computer models were developed in an attempt to reproduce the sequential decoder computation curve of Deep Space Network (DSN) ground station receivers, by simulation of the binary data output of the Gaussian channel with the carrier phaselock loop and the subcarrier demodulator assembly. Simulations were run at bit rates equal to the powers of 2 from 8 to 2,048, and agreement with DSN data was generally good above 32 bits per second. Simulation results at data rates of 8, 16, and 32 bits per second did not closely match experimental data. This simulation provides a more accurate prediction of DSN computation lengths than either current mathematical models or simulations without both the subcarrier demodulator and carrier loop.

Jones, H. W., Jr.↗

Low-cost mechanical filters for OMEGA receivers

A pair of prototype low frequency mechanical filters were obtained for use as the RF front-end components of an OMEGA-VLF navigation receiver. The filter units are of interest because of very narrow bandwidths and high skirt selectivity to minimize noise and off-channel carriers in the reception of OMEGA signals. In addition, the filters have a characteristic low impedance of 75 to 5,000 ohms which results in less critical PC board circuitry compared to some previous resonators with termination resistances of 25,000 ohms to 5 megohms.

Burhans, R. W.↗

A 1.06 micrometer avalanche photodiode receiver

The development of a complete solid state 1.06 micron optical receiver which can be used in optical communications at data rates approaching 1.5 Gb/s, or in other applications requiring sensitive, short pulse detection, is reported. This work entailed both the development of a new type of heterojunction III-V semiconductor alloy avalanche photodiode and an extremely charge-sensitive wideband low noise preamp design making use of GaAs Schottky barrier-gate field effect transistors (GAASFET's) operating in in the negative-feedback transimpedance mode. The electrical characteristics of the device are described.

Eden, R. C.↗

Design and simulation of stratified probability digital receiver with application to the multipath communication

One approach to the problem of simplifying complex nonlinear filtering algorithms is through using stratified probability approximations where the continuous probability density functions of certain random variables are represented by discrete mass approximations. This technique is developed in this paper and used to simplify the filtering algorithms developed for the optimum receiver for signals corrupted by both additive and multiplicative noise.

Deal, J. H.↗

Diurnal measurements with prototype CMOS Omega receivers

Diurnal signals from eight omega channels have been monitored at 10.2 KHz for selected station pairs. All eight Omega stations have been received at least 50 percent of the time over a 24 hour period during the month of October 1976. The data presented confirm the expected performance of the CMOS omega sensor processor in being able to digsignals out of a noisy environment. Of particular interest are possibilities for use of antipodal reception phenomena and a need for some ways of correcting for multi-modal propagation effects.

Burhans, R. W.↗

ERDA's central receiver solar thermal power system studies

The utilization of solar energy for electrical power production was studied. Efforts underway on the central receiver solar thermal power system are presented. Preliminary designs are included of pilot plant utilizing large numbers of heliostats in a collector field. Safety hazards are also discussed, as well as the most beneficial location of such a plant within the United States.

Lippy, L. J.↗