Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Dynamic tooth loads and stressing for high contact ratio spur gears

An analysis and computer program were developed for calculating the dynamic gear tooth loading and root stressing for high contact ratio gearing (HCRG) as well as LCRG. The analysis includes the effects of the variable tooth stiffness during the mesh, tooth profile modification, and gear errors. The calculation of the tooth root stressing caused by the dynamic gear tooth loads is based on a modified Heywood gear tooth stress analysis, which appears more universally applicable to both LCRG and HCRG. The computer program is presently being expanded to calculate the tooth contact stressing and PV values. Sample application of the gear program to equivalent LCRG (1.566 contact ratio) and HCRG (2.40 contact ratio) revealed the following: (1) the operating conditions and dynamic characteristics of the gear system an affect the gear tooth loading and root stressing, and therefore, life significantly; (2) the length of the profile modification affect the tooth loading and root stressing significantly, the amount depending on the applied load, speed, and contact ratio; and (3) the effect of variable tooth stiffness is small, shifting and increasing the response peaks slightly from those for constant tooth stiffness.

Cornell, R. W.↗

EUV branching ratios for ionized nitrogen and oxygen emissions

Branching ratios of single ionized atomic nitrogen and oxygen EUV emissions that terminate on the metastable states of the respective ions are presented. The four NII ratios and the 482/515 A ratio in OII reported represent the first measured values. Details of the wavelength calibration procedures adopted and a brief discussion of two modeling implications of the measured ratios are included.

Morrison, M. D.↗

The C-12/C-13 ratio in Jupiter from the Voyager infrared investigation

An analysis of the v(4) band of CH4 in the spectra recorded by the Voyager 1 IRIS experiment has yielded a C-12/C-13 ratio in Jupiter that is 160 plus 40 or minus 55, or 1.8 plus 0.4 or minus 0.6 times the terrestrial value. It is noted that while no plausible theory predicts such a difference between the C-12/C-13 ratio values of Jupiter and the inner solar system, values of this ratio in the solar neighborhood 4.5 million years ago, inferred from recent interstellar medium measurements, are compatible with the present determination in Jupiter. The Jovian, rather than the terrestrial value, would then be representative of the carbon isotope ratio in the primitive solar nebula.

Courtin, R.↗

The retrieval of atmospheric constituent mixing-ratio profiles from solar absorption spectra

Methods used to determine various atmospheric gas distributions are summarized. The experimentally determined mixing ratio profiles (the mixing ratio of a gas is the ratio of the number of gas molecules to the number of air molecules) of some atmospheric gases are shown. In most in situ experiments stratospheric gas samples are collected at several altitudes by balloon, aircraft, or rocket. These samples are then analyzed by various methods. Mixing ratio profiles of Ci, ClO, and OH were determined by laser induced fluorescence of samples. Others have analyzed gas samples by gas chromatography in order to determine the molecular abundances of CCl2F2, CCl4, CCl3F, CFCl3, CF2Cl2, CHClF2, CH3CCl3, CH4, CO, C2Cl3F3, C2Cl4, C2HCl3, C2H2, C2H4, C2H6, C3H8, C6H6, C7H8, H2, and N2O.

Shaffer, W. A.↗

Si III line ratios in the sun

New atomic data for Si III have been used to predict level populations and emission-line intensity ratios for electron densities and temperatures appropriate to the solar transition region. The electron impact collision rates used here are substantially larger than those previously published owing to delineation of the complex resonance structures in the low-energy collision strengths. This together with small changes in the spontaneous radiative rates produces significant changes in the calculated intensity ratios. Generally good agreement is found with observations obtained using the Naval Research Laboratory slit spectrograph aboard Skylab, electron densities from three Si III ratios and from other methods normally agreeing to 0.2 dex or better for a wide variety of solar features. For a fourth ratio, incorporating lines with a wide wavelength separation, the agreement is less satisfactory, possibly owing to uncertainties in the observational data.

Dufton, P. L.↗

Balloon and aircraft measurement of stratospheric sulfate mixing ratio following the El Chichon eruption

Profiles of sulfate mixing ratio versus altitude over the range 15-28 km were obtained from filter samples collected aboard balloons and U-2 aircraft. Observations were made in the summer, fall, and winter following the March-April 1982, El Chichon eruption. Observed sulfate mixing ratios were approximately two orders of magnitude greater than typical background (not volcanically augmented) mixing ratios. The sulfate mixing ratios obtained form the aircraft filter measurements were in good agreement with the results from a wire impactor and a particle counter flown simultaneously. Computations of the amount of sulfate contained in a vertical column of sq m were in agreement with similar calculations from airborne lidar, balloon-borne particle counters, and Solar Mesosphere Explorer satellite radiance retrievals.

Gandrud, B. W.↗

The 4He1H ratios in the chemical compositions of solar flare particles and the primordial solar nebula

The chemical abundances of solar flare particles are similar to those of galactic cosmic rays at their sources. In order to infer the 4He/1H ratio in the solar atmosphere, this ratio as observed in the interstellar gases was considered in addition to those which were contained of galactic cosmic rays and the stars classified as the early types. Since it is clear that the most of these ratios ever deduced for both of the Sun and solar flare particles are lower than those for the interstellar gases, this ratio suggests that hydrogens are relatively overabundant in the chemical abundances of the Sun and the primordial solar nebula as compared to those of the interstellar gases currently observed.

Sakurai, K.↗

Theoretical investigation of the interstellar CH3NC/CH3CN ratio

Calculations have been performed to determine the abundance ratio of the metastable isomer CH3NC to the stable isomer CH3CN in dense interstellar clouds. According to gas phase, ion-molecule treatments, these molecules are both synthesized via protonated ion precursors. A calculation has been made of the ratio of the formation rates of the protonated precursor ions, CH3NCH(+) and CH3CNH(+), synthesized via the radiative association reaction between CH3(+) and HCN, which is thought to be the dominant formation process of the two isomeric ions. The calculations, which involve both ab initio quantum chemistry and equilibrium determinations, lead to a predicted CH3NCH(+)/CH3CNH(+) formation rate ratio between 0.1 and 0.4. If this ratio is maintained in the neutral species formed from the precursor ions, theory predicts a sizable abundance for methyl isocyanide (CH3NC) and lends credence to its tentative observation.

Defrees, D. J.↗

The C-12/C-13 isotope ratio toward Zeta Ophiuchi

Observations of interstellar CH(+) toward Zeta Oph were performed to determine the C-12/C-13 isotope ratio in this diffuse cloud. The very high signal-to-noise ratio spectra yield 6 sigma detections of the (C-13)H(+) features at 4232 A and 3957 A; a weighted mean C-12/C-13 ratio of 43 + or - 6 (1 sigma) is obtained. The uncertainty includes the contribution of continuum placement errors, statistical channel-to-channel signal fluctuations, and the error introduced in deconvolving the blended isotopic lines at 4232 A. This result indicates a decrease in the local galactic C-12/C-13 ratio by a factor of 2 during the 4.6 billion yr since the formation of the sun.

Hawkins, I.↗

Effect of maximum lift to drag ratio on optimal aeroassisted plane change

The influence of the maximum lift-to-drag ratio on the turning performance of an Orbital Transfer Vehicle is analyzed. Chapman's variables are used to formulate the equations of motion which are valid for both atmospheric flight and flight in a vacuum in a Newtonian gravitational field. Of the six adjoint variables involved in the variational formulation, four exact integrals and two approximate relations are obtained. This leads to an approximate but explicit control law for the lift and bank control. The control law is tested numerically for a whole range of entry speeds, from parabolic entry to near-circular entry with several values of maximum lift-to-drag ratio. The extensive numerical results, which are very accurate as compared to the exact optimal values, show that the maximum plane change for any speed ratio V(entry)/V(final) is simply proportional to the maximum lift-to-drag ratio, and depends solely on this parameter.

Johannesen, J. R.↗

Supersonic axial-force characteristics of a rectangular-box cavity with various length-to-depth ratios in a flat plate

A wind-tunnel investigation has been conducted at Mach numbers of 1.50, 2.16, and 2.86 to obtain axial-force data on a metric rectangular-box cavity with various length-to-depth ratios. The model was tested at angles of attack from -4 deg to -2 deg. The results are summarized to show variations in cavity axial-force coefficient for deep- and shallow-cavity configurations with detached and attached cavity flow fields, respectively. The results of the investigation indicate that for a wide range of cavity lengths and depths, good correlations of the cavity axial-force coefficients (based on cavity rear-face area) are obtained when these coefficients are plotted as a function of cavity length-to-depth ratio. Abrupt increases in the cavity axial-force coefficients at an angle of attack of 0 deg. reflect the transition from an open (detached) cavity flow field to a closed (attached) cavity flow field. Cavity length-to-depth ratio is the dominant factor affecting the switching of the cavity flow field from one type to the other. The type of cavity flow field (open or closed) is not dependent on the test angles of attack except near the critical value of length-to-depth ratio.

Blair, A. B., Jr.↗

IUE and IRAS observations of luminous M stars with varying gas-to dust ratios

Circumstellar gas and dust surrounding M giants and supergiants show luminous M stars to split into two distinct classes. Stars with a high gas to dust ratio all show chromospheric Ca II, H, and K emission. Stars with a high dust to gas ratio do not show chromospheric Ca II emission but are the only ones to show Balmer emission indicative of atmospheric shocks and are also the only ones to show maser emission. In order to determine whether all chromospheric indicators disappear in high dust to gas ratio stars, a survey of stars in both these classes was conducted with the IUE satellite. Long wavelength infrared fluxes for the program stars were obtained from the IRAS point source catalog. There is no obvious difference in the long wavelength observations between the two groups of stars. The long wavelength excess tends to follow the 10 micron excess and not the dust to gas ratio.

Hagen, W.↗

Measurements of concentrations of chlorofluoromethanes (CFMs) carbon dioxide and carbon isotope ratio in stratospheric and tropospheric air by grab-sampling systems

Measurements of concentrations of chlorofluoromethanes (CFMs), carbon dioxide and carbon isotope ratio in stratospheric and tropospheric air by grab-sampling systems are reported. The balloon-borne grab-sampling system has been launched from Sanriku Balloon Center three times since 1981. It consists of: (1) six sampling cylinders, (2) eight motor driven values, (3) control and monitor circuits, and (4) pressurized housing. Particular consideration is paid to the problem of contamination. Strict requirements are placed on the choice of materials and components, construction methods, cleaning techniques, vacuum integrity, and sampling procedures. An aluminum pressurized housing and a 4-m long inlet line are employed to prevent the sampling air from contamination by outgassing of sampling and control devices. The sampling is performed during the descent of the system. Vertical profiles of mixing ratios of CF2Cl2, CFCl3 and CH4 are given. Mixing ratios of CF2Cl2 and CFCl3 in the stratosphere do not show the discernible effect of the increase of those in the ground level background, and decrease with altitude. Decreasing rate of CFCl3 is larger than that of CF2Cl2. CH4 mixing ratio, on the other hand, shows diffusive equilibrium, as the photodissociation cross section of CH4 is small and concentrations of OH radical and 0(sup I D) are low.

Itoh, T.↗

Investigation of chord ratio, stagger, decalage angle, and flap angle for dual wing configurations

Aerodynamical closely coupled dual wing configurations of unequal chords are investigated for medium speed general aviation applications. Vortex panel and momentum boundary layer analysis are utilized for the two-dimensional predictions. A multi-surface vortex lattice method is used for the three-dimensional predictions. In the process of searching for the highest lift to drag ratio upper airfoil to lower airfoil chord ratios, both greater than and less than one, are investigated in terms of stagger, decalage angle, and gap. With the optimum chord ratio, at the optimum stagger and gap, proper spanwise decalage distribution is shown to yield the lowest two dimensional drag results. Various wing taper ratios and wing twists are investigated to increase wing efficiency. Comparisons are made between optimized dual and optimized single wing configurations both with the same fuselage, stabilator surfaces, engines, payload, and fuel. The dual wing configuration is shown to have significantly less drag and hence longer range than the conventional single wing configuration.

Selberg, B. P.↗

Supersonic wing-body inteference at high angles of attack with emphasis on low aspect ratios

A systematic NASA data base for cruciform wing-body combinations has been analyzed to extract the values of the wing and body interference factors. The fin planforms vary in aspect ratio from 0.5 to 2.0, the Mach number from 2.5 to 4.5, and the angle of attack from 0 deg to 40 deg. Sufficient data are available to permit interpolation with respect to fin aspect ratio, taper ratio, Mach number, and angle of attack. The data base described in this paper can be used in an engineering prediction method to determine the normal force of planar wing-body combinations and for scaling the effects of body radius-fin semispan ratio.

Nielsen, J. N.↗

Temperature diagnostic line ratios of Fe XVII

Based on extensive calculations of the excitation rates of Fe XVII, four temperature-sensitive line ratios are investigated, paying special attention to the contribution of resonances to the excitation rates and to the contributions of dielectronic recombination satellites to the observed line intensities. The predictions are compared to FPCS observations of Puppis A and to Solar Maximum Mission (SMM) and SOLEX observations of the sun. Temperature-sensitive line ratios are also computed for emitting gas covering a broad temperature range. It is found that each ratio yields a differently weighted average for the temperature and that this accounts for some apparent discrepancies between the theoretical ratios and solar observations. The effects of this weighting on the Fe XVII temperature diagnostics and on the analogous Fe XXIV/Fe XXV satellite line temperature diagnostics are discussed.

Raymond, J. C.↗

Far-field acoustics of supersonic rectangular nozzles with various throat aspect ratios

The far-field acoustic behavior of supersonic jets produced by four rectangular nozzles with various throat aspect ratios are reported. One nozzle tested was designed for an exit Mach number of 1.66 with throat aspect ratio of 2.0. The remaining three nozzles (throat aspect ratios of 3.7, 5.8, 7.6) were designed for an exit Mach number of 1.35. Acoustic results presented include narrowband spectra and overall sound pressures for numerous operating pressure ratios and spatial locations.

Ponton, M. K.↗

Middle and upper tropospheric carbon monoxide mixing ratios as measured by a satellite-borne remote sensor during November 1981

Mixing ratios of tropospheric carbon monoxide measured by a gas filter radiometer carried aboard the Space Shuttle during November 1981 are reported. The data represent average mixing ratios in the middle and upper troposphere between 38 deg N and 38 deg S latitude. Approximately 10,000 individual measurements were obtained in each of the two channels of the instrument. The data are presented in the form of plots that show the individual carbon monoxide mixing ratio measurements as a function of latitude and longitude and in the form of maps that show the data averaged over 5 deg latitude by 5 deg longitude squares. The data show relatively little variation in the mixing ratio in the Southern Hemisphere; however, the data from both the tropics and the Northern Hemisphere show strong gradients with both latitude and longitude.

Reichle, H. G., Jr.↗