SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
AIRSAR has served as a test-bed for both imaging radar techniques and radar technologies for over a decade. In fact, the polarimetric, cross-track interferometric, and along-track introferometric radar techniques were all developed using AIRSAR.
This lecture was just a taste of radar remote sensing techniques and applications. Other important areas include Stereo radar grammetry. PolInSAR for volumetric structure mapping. Agricultural monitoring, soil moisture, ice-mapping, etc. The broad range of sensor types, frequencies of observation and availability of sensors have enabled radar sensors to make significant contributions in a wide area of earth and planetary remote sensing sciences. The range of applications, both qualitative and quantitative, continue to expand with each new generation of sensors.
The 2d Generation Precipitation Radar is a new design for a dual-frequency (13.4 and 35.6 GHz) spaceborne precipitation radar. An airborne PR-2 simulator has been developed to demonstrate key technologies. This airborne system was flown on the NASA DC-8 aircraft during the 4th Convection and Moisture Experiment in 2001. Data were acquired in Tropical Storms Chantal and Gabrielle, Hurricane Humberto, and in several more localized convective systems. The authors discuss the design of thePR-2 airborne radar and show observations from CAMEX-4. Overall, the observations validated the design of PR-2 and provide an extensive data set for scientific analysis.
This paper discusses cloud radar calibration and intercomparison of airborne and ground-based radar measurements and presents a unique algorithm for attenuation retrieval. This algorithm is based on dual 95-GHz radar measurements of the same cloud and precipitation volumes collected from opposing viewing angles.
Modern spaceborne radar scatterometers such as the NASA Scatterometer (NSCAT) and SeaWinds radar instruments require precise determination of the normalized backscattered radar cross section within a few tenth of a decibel in order to achieve the desired wind velocity and direction measurement accuracy of 2 m/s and 20 degrees respectively.
We describe Doppler-only radar observations of near-Earth asteroids 2062 Aten, 2101 Adonis, 3103 Eger, 4544 Xanthus, and 1992 QN that were obtained at Arecibo and Goldstone between 1984 and 1996. Estimates of the echo spectral bandwidths, radar cross sections, and circular polarization ratios of these objects constrain their pole-on breadths, radar albedos, surface roughnesses, taxonomic classes, rotation periods, and spin vectors.
Use of Doppler velocity measurement in spaceborne precipitation radar is highly desirable, since it can allow more accurate retrieval of atmospheric latent heating, which depends on both cloud and rain microphysical processes and on dynamical processes, namely, vertical updrafts and downdrafts. However, if the rain within the antenna beam is very non-uniform, biases can result with conventional pulse-pair processing, and more sophisticated processing is required. The solution is a time-frequency approach, which uses the full Doppler spectrum at each point in time. Since precipitation radars normally operate continuously and collect large amounts of data, real-time, on-board processing of data is needed to reduce the data rate. The objective of this work is to develop an on-board data processor for spaceborne Doppler precipitation radar, using field-programmable gate array (FPGA) technology. This paper describes the simulations and analysis that have been completed during the first year of the project. This includes both analytical calculations and bit-true simulations that allow the effects of finite word length to be explored. Tradeoffs have also been considered between speed and space within the chosen FPGA part. The results of these analyses have been used to develop a complete set of requirements for the processor. Initial design work has begun, based on these requirements. The design is being implemented in Verilog, and a description of this early design effort is also be given.
Earth-based delay-Doppler radar observations of Mars with four receiving stations were carried out during the Mars oppositions of 2001 and 2003 in support of Mars Exploration Rover landing site selection. This interferometric planetary radar technique has demonstrated radar mapping of Mars with a 5 km spatial resolution.
Effects of multiple scattering on reflectivity are studied for millimeter wavelength weather radars. A time-independent vector theory, including up to second-order scattering, is derived for a single layer of hydrometeors of a uniform density and a uniform diameter. In this theory, spherical waves with a Gaussian antenna pattern are used to calculate ladder and cross terms in the analytical scattering theory. The former terms represent the conventional multiple scattering, while the latter terms cause backscattering enhancement in both the copolarized and cross-polarized components. As the optical thickness of the hydrometeor layer increases, the differences from the conventional plane wave theory become more significant, and essentially, the reflectivity of multiple scattering depends on the ratio of mean free path to radar footprint radius. These results must be taken into account when analyzing radar reflectivity for use in remote sensing.
We have developed an instrument concept that combines a conventional nadir altimeter with a radar interferometer to meet the above requirements. In this paper, we describe the overall mission concept and the interferometric radar design. We also describe several new technology developments that facilitate the inclusion of this instrument on a small, inexpensive spacecraft bus. Those include ultra-light, deployable reflectarray antennas for the radar interferometer; a novel five frequency feed horn for the radiometer and altimeter; a lightweight, low power integrated three frequency radiometer; and a field programmable gate array-based onboard data processor. Finally, we discuss recent algorithm developments for the onboard date processing, and present the expected instatements performance improvements over previously reported results.
This viewgraph presentation reviews the estimates and modeling for S-band Lunar radar backscatter. By way of basic review it shows the average lunar radar behavior, the average lunar radar cross-section at 3.8-cm, 23-cm and 68-cm wavelengths. It also reviews the equations for estimating 13 cm scattering from 3.8 and 23 cm data. Charts show the inferred 13-cm average scattering derived from interpolation of the 1960's observations and the modeled 13-cm average scattering. It also reviews the scattering differences: between linear polarizations from slopes from roughness.
The Cloud Profiling Radar is the key science instrument for the CloudSat Mission to acquire a global data set of vertical atmospheric cloud structure and its variability. CPR is a 94 GHz nadir-looking radar that measures the power backscattered by clouds as a function of distance from the radar. This sensor is expected to provide cloud measurements at a 500-m vertical resolution and a 1.5-km horizontal resolution. CPR will operate in a short pulse mode and will yield measurements at a minimum detectable sensitivity of -28 dBZ.
Measurement of precipitation Doppler velocity by spaceborne radar is complicated by the large velocity of the satellite platform. Even if successive pulses are well correlated, the velocity measurement may be biased if the precipitation target does not uniformly fill the radar footprint. It has been previously shown that the bias in such situations can be reduced if full spectral processing is used. The authors present a processor based on field-programmable gate array (FPGA) technology that can be used for spectral processing of data acquired by future spaceborne precipitation radars. The requirements for and design of the Doppler processor are addressed. Simulation and laboratory test results show that the processor can meet real-time constraints while easily fitting in a single FPGA.
The Cassini/Huygens Mission is a nineteen-year multinational project to design, construct and execute an investigation of the Saturn system, with emphasis on its largest moon, Titan. Titan's atmosphere is nearly opaque at optical wavelengths, so a Ku-band radar imaging system was required to map its surface. In this paper we describe the radar instrument, discuss some of the challenges to its design, and review its operating modes. We briefly summarize the surprises that the radar instrument has revealed while investigating Titan.
The Cloud Profiling Radar (CPR), the primary science instrument of the CloudSat Mission, is a 94-GHz nadir-looking radar that measures the power backscattered by clouds as a function of distance from the radar. This instrument will acquire a global time series of vertical cloud structure at 500-m vertical resolution and 1.4-km horizontal resolution. CPR will operate in a short-pulse mode and will yield measurements at a minimum detectable sensitivity of -28 dBZ.
A coherent Uplink Array consisting of two or three 34-meter antennas of NASA's Deep Space Network has been developed for the primary purpose of increasing EIRP at the spacecraft. Greater EIRP ensures greater reach, higher uplink data rates for command and configuration control, as well as improved search and recovery capabilities during spacecraft emergencies. It has been conjectured that Doppler-delay radar imaging of lunar targets can be extended to planetary imaging, where the long baseline of the uplink array can provide greater resolution than a single antenna, as well as potentially higher EIRP. However, due to the well known R4 loss in radar links, imaging of distant planets is a very challenging endeavor, requiring accurate phasing of the Uplink Array antennas, cryogenically cooled low-noise receiver amplifiers, and sophisticated processing of the received data to extract the weak echoes characteristic of planetary radar. This article describes experiments currently under way to image the planets Mercury and Venus, highlights improvements in equipment and techniques, and presents planetary images obtained to date with two 34 meter antennas configured as a coherently phased Uplink Array.
The planned Soil Moisture Active Passive (SMAP) mission will use both active radar and passive radiometer instruments at L-Band to measure and monitor both soilmoisture and freeze/thaw state globally. The frequency band allocated for the SMAP radar is shared with the Global Navigation Satellite Systems and ground-basedradiolocation services. Signals from those users present significant sources of anthropogenic radio frequency interference (RFI) which contaminate the radarmeasurements. To mitigate RFI, the radar is designed with tunable operating frequency, which allows the center frequency to be tuned to avoid RFI. The filtering scheme in the receiver is configured to get a high level of RFI suppression. To meet the high accuracy measurement requirements, RFI detection and correction will be required during ground data processing. Some candidate algorithms have been evaluated, and they have been tested against simulated SMAP data derived from the PALSAR data.
Discusses: (1) JPL Radar Overview and Historical Perspective (2) Signal Processing Needs in Earth and Planetary Radars (3) Examples of Current Systems and techniques (4) Future Perspectives in signal processing for radar missions