Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REDOX REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

How Solvent Mediates the Catalytic Fate of 2-Methoxyphenol in Hydrodeoxygenation Catalysis?

Kinetic and isotopic assessments combined with theoretical calculations shed light on the mechanistic differences in terms of the number of hydrogen addition steps and the electronic charges of reactive hydrogen in the catalytic sequence leading to the Ar−OCH 3 scission of 2-methoxyphenol occurring at various interfaces of vapor−Ru, cyclohexane−Ru, and water−Ru. At vapor−Ru and cyclohexane−Ru interfaces, the initial hydrogen adatom (H*) additions on the phenyl ring disrupt its aromaticity, as a step required to occur before kinetically relevant Ar−OCH 3 scission on an ensemble of Ru sites. The number of H* addition events prerequisite to the formation of the kinetically relevant Ar−OCH 3 scission transition state, however, is larger at the cyclohexane−Ru interface than those at the vapor−Ru and water−Ru interfaces. The preferential solvation of 2-methoxyphenol derived reaction precursors and H* weakens their adsorption on Ru sites, which leads to a decrease in the activation barrier for the third H* addition step and in turn a larger number of H* additions. At the water−Ru interface, water as a polar protic solvent promotes the Ar−OCH 3 scission by enabling a mechanistically distinct catalytic route an adjacent water molecule from the solvent layer assists with the intramolecular proton shuttling from the hydroxyl group (−OH) to the vicinal methoxy group (−OCH 3 ) of 2-methoxyphenol, evolving a highly charged transition state that is further stabilized by the water solvent layer, thereby leading to Ar−OCH 3 scission rate constants that are much higher than those at the vapor−Ru interface and, when comparing at the same H 2 chemical potential, higher Ar−OCH 3 scission turnovers. Furthermore, these distinct mechanistic details of the Ar−OCH 3 scission at various reaction interfaces, inferred from experiment and theory, illustrate how a solvent either solvates reaction intermediates and transition states or directly participates in the formation of kinetically relevant transition states, leading to changes in the free energy landscape, thus rewriting the catalytic fates in hydrodeoxygenation reactions.

09 BIOMASS FUELS↗

Catalytic bias in oxidation–reduction catalysis

Cataytic bias refers to the propensity of a reaction catalyst to effect a different rate acceleration in one direction versus the other in a chemical reaction under non-equilibrium conditions. In biocatalysis, the inherent bias of an enzyme is often advantagous to augment the innate thermodynamics of a reaction to promote efficiency and fidelity in the coordination of catabolic and anabolic pathways. In industrial chemical catalysis a directional cataltyic bias is a sought after property in facilitating the engineering of systems that couple catalysis with harvest and storage of for example fine chemicals or energy compounds. Interestingly, there is little information about catalytic bias in biocatalysis likely in large part due to difficulties in developing tractible assays sensitive enough to study detailed kinetics. For oxidation–reduction reactions, colorimetric redox indicators exist in a range of reduction potentials to provide a mechanism to study both directions of reactions in a fairly facile manner. The current short review attempts to define catalytic bias conceptually and to develop model systems for defining the parameters that control catalytic bias in enzyme catalyzed oxidation–reduction catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Absolute band-edge energies are over-emphasized in the design of photoelectrochemical materials

The absolute band-edge potentials of semiconductors, i.e., the conduction-band minimum, valence-band maximum, and their relative positions to solution redox potentials, are often invoked as design principles for photoelectrochemical (PEC) devices, especially for particulate photocatalysts. Here we show that reliance on these criteria is not necessary and limits the exploration of materials that will advance the fields of photoelectrochemistry, photochemistry, and photocatalysis. We discuss how i) band-edge energies are not singular parameters and instead shift with pH, electrolyte type, and surface chemistry; ii) the free energy of electrons and holes in comparison to that of solution redox couples dictates overall reaction spontaneity and thus reactivity; and iii) favorable charge-transfer kinetics can occur even when the relevant electrolyte redox potential(s) appear ‘outside’ the bandgap, enabled by the inversion or accumulation of electronic charge at the semiconductor surface. As a result, this discussion informs design principles for photocatalyst systems engineering for both one-electron redox reactions as well as for more complex multi-electron transfer reactions (e.g, H 2 evolution, H 2 O oxidation, CO 2 reduction).

14 SOLAR ENERGY↗

Phloroglucinol–2,6‐Diaminoanthraquinone as a Durable Redox Mediator for Enhancing Conversion Reaction Kinetics in Lithium‐Sulfur Batteries

Abstract Lithium‐sulfur batteries, despite being a promising solution for next‐generation secondary batteries, require substantial efforts to overcome the challenges of sluggish sulfur redox kinetics, polysulfides shuttling, and Li metal instability before achieving practical viability. Conventional strategies that utilize metal catalysts or soluble redox mediators (RMs) are limited by either impractical producing processes or unsatisfactory service life. Herein, an electrochemically active organic material, phloroglucinol – 2,6‐diaminoanthraquinone (PG‐DAAQ) is synthesized through a green and facile polymerization process to better resolve these issues. Serving as an RM at the cathode, PG‐DAAQ exhibits enduring redox activity within the sulfur operating potential window, leading to enhanced redox kinetics and sulfur utilization. Remarkably, even without any metal elements, PG‐DAAQ exhibits an excellent affinity to polysulfides, thereby suppressing the shuttling and facilitating the formation of a more favorable solid‐electrolyte interface to stabilize Li deposition at the anode. As a result, Li‐S cells employing PG‐DAAQ show significantly enhanced cycling and rate performances than the control cells. Even with a low electrolyte‐to‐sulfur ratio of 6, pouch cells with PG‐DAAQ deliver a reversible discharge capacity of 821 mA h g −1 after 100 cycles at a C/10 rate.

Lai, Tianxing↗

Developing a Redox Network for Coastal Saltmarsh Systems in the PFLOTRAN Reaction Model

Coastal ecosystems have been largely ignored in Earth system models but are important zones for carbon and nutrient processing. Interactions between water, microbes, soil, sediments, and vegetation are important for mechanistic representation of coastal processes and ecosystem function. To investigate the role of these feedbacks, we used a reactive transport model (PFLOTRAN) that has the capability to be connected to the Energy Exascale Earth System Model (E3SM). PFLOTRAN was used to incorporate redox reactions and track chemical species important for coastal ecosystems as well as define simple representations of vegetation dynamics. Here our goal was to incorporate oxygen flux, salinity, pH, sulfur cycling, and methane production along with plant-mediated transport of gases and tidal flux. Using porewater profile and incubation data for model calibration and evaluation, we were able to create depth-resolved biogeochemical soil profiles for saltmarsh habitat and use this updated representation to simulate direct and indirect effects of elevated CO 2 and temperature on subsurface biogeochemical cycling. We found that simply changing the partial pressure of CO 2 or increasing temperature in the model did not fully reproduce observed changes in the porewater profile, but the inclusion of plant or microbial responses to CO 2 and temperature manipulations was more accurate in representing porewater concentrations. This indicates the importance of characterizing tightly coupled vegetation-subsurface processes for developing predictive understanding and the need for measurement of plant-soil interactions on the same time scale to understand how hotspots or moments are generated.

54 ENVIRONMENTAL SCIENCES↗

Tandem bulk oxygen diffusion and surface reactions in reducible metal oxides control redox cycle dynamics

The interplay between bulk oxygen diffusion and surface reactions in reducible metal oxides is key in heterogeneous catalysts, but direct measurements of oxygen mobility, transient kinetics, and in situ spectroscopies have been lacking. Here, we reveal complex dynamic behavior of ceria-zirconia by H 2 using transient kinetics via mass spectrometry and in situ Raman and near-ambient pressure x-ray photoelectron spectroscopies. Molecular dynamics simulations with a machine learning potential delineate competitive oxygen diffusion mechanisms, with an optimal mobility at intermediate reductions. We expose a compensation between vacancy availability and lattice distortion at intermediate to high reductions and Frenkel defects at low reductions, underscoring a potential deficiency of 16 O/ 18 O exchange experiments in deducing oxygen mobility. Vacancies in proximity require electron localization on Ce atoms further away. The continuous replenishment of surface oxygen results in a varying reduction rate, with H 2 dissociation being the rate-limiting step. Multiscale transient simulations, consistent with experiments, indicate catalysts of potentially spatially varying oxidation states. The approach is broadly applicable to reducible oxide materials.

36 MATERIALS SCIENCE↗

Facet-specific oxidation of Mn(II) and heterogeneous growth of manganese (oxyhydr)oxides on hematite nanoparticles

It is recognized that different facets of minerals vary distinctively in their chemical reactivity with aqueous solutions. However, detailed molecular and atomistic understandings of these phenomena are relatively limited. This study investigated the interaction of aqueous Mn2+ and dissolved oxygen on various facets of two morphology-types of iron oxide (hematite) nanocrystals. These interactions result in the oxidation of manganese and the heterogeneous nucleation and growth of Mn(II)/Mn(III), and Mn(III) oxides. The nanoscale morphology and atomic structure of the manganese oxide products were characterized in detail. Our results, for the first time, directly demonstrate the facet-dependent oxidation of Mn 2+ and nucleation of Mn(II/III) oxides, followed by their epitaxial growth on hematite. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron diffraction measurements reveal the growth of MnOx nanowires on {012} facets of both hematite nanoplates (HNP) and hematite nanocubes (HNC), while the basal {001} facets on the HNP particles do not produce precipitates. The average oxidation state of the MnO x on HNP and HNC determined using electron energy-loss spectroscopy (EELS) show that both Mn(II) and Mn(III) are present. The facet-dependent oxidation of Mn 2+ may be attributed to adsorption-induced electron transfer (ET), and hematite {001} facets generally exhibiting weaker ability in the uptake of ions relative to {012} facets, and the bulk ET from {012} to {001} facets through the conduction band of hematite. Nevertheless, the mineral composition and growth mechanisms of MnOx catalyzed by HNP and HNC are similar. High-resolution TEM analysis reveals the presence of both hausmannite and manganite on HNP and HNC. The nanoscale observations and thermodynamic considerations indicate that the growth mechanisms/processes of MnO x include heterogeneous nucleation of hausmannite nanoparticles, crystallization by particle attachment, transformation from hausmannite to manganite, and self-catalyzed MnO x growth. It is possible that all of these processes are concurrent. The crystallographic relationship between the heterogeneously formed manganite with hematite, which has not been reported before, proves that hematite provides reaction sites and functions as an atomic template for the formation of MnO x nanowires. These findings advance our understanding of the redox chemistry and heterogeneous growth of minerals as controlled by the surficial structure of the substrate mineral. This has important geochemical implications as the catalytic growth of less common, highly reactive phases like MnO x are known to be consequential in complex natural and anthropogenic environments.

36 MATERIALS SCIENCE↗

Photoelectrochemical Nitrate and Nitrite Reduction Using Cu 2 O Photocathodes

Nitrate in wastewater streams causes eutrophication, and nitrate removal is of great importance for environmental protection. Electrochemical nitrate reduction has the advantage of directly converting nitrate to benign or useful chemicals, but it typically requires a considerable overpotential. Here, in this study, photoelectrochemical nitrate reduction is investigated using a Cu 2 O photocathode, where photoexcited electrons in the conduction band inherently have an overpotential of >1.6 V for nitrate reduction. The Cu 2 O photocathode is found to reduce nitrate to nitrite selectively with a high Faradaic efficiency (>85%). More importantly, as the surface of Cu 2 O is particularly catalytic for nitrate reduction, nitrate reduction on Cu 2 O kinetically suppresses photocorrosion of Cu 2 O without the need for additional catalyst or protection layers. In addition to nitrate reduction, nitrite reduction on Cu 2 O is examined to compare the effects of nitrate and nitrite reduction kinetics on the photocurrent generation and photocorrosion of Cu 2 O photocathodes.

25 ENERGY STORAGE↗

Theoretical Investigation of the Reaction Mechanism of the Guaiacol Hydrogenation over a Pt(111) Catalyst

The reaction mechanism of the mild hydrogenation of guaiacol over Pt(111) has been investigated by density functional theory calculations and microkinetic modeling. Our model suggests that at 573 K, catechol is the preferred reaction product and that any deoxygenation to, for example, phenol or benzene is at least 4 orders of magnitude slower than the production of catechol. Slow deoxygenation of guaiacol can occur by decarbonylation and possibly by hydrogenation of the phenyl ring followed by C–OH bond cleavage. Direct –OH removal without activation of the phenyl ring is found to be at least 5 orders of magnitude slower. Altogether, this study suggests that Pt(111) sites are not active deoxygenation sites and that the experimentally observed deoxygenation activity of Pt catalysts originates likely from the involvement of the catalyst support or Pt step and corner sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of temperature on reduction of CaSO{sub 4} oxygen carrier in chemical-looping combustion of simulated coal gas in a fluidized bed reactor

Chemical-looping combustion (CLC) is a promising combustion technology for gaseous and solid fuel with efficient use of energy and inherent separation of CO{sub 2}. The concept of a coal-fueled CLC system using, calcium sulfate (CaSO{sub 4}) as oxygen carrier is proposed in this study. Reduction tests of CaSO{sub 4} oxygen carrier with simulated coal gas were performed in a laboratory-scale fluidized bed reactor in the temperature range of 890-950{degree}C. A high concentration of CO{sub 2} was obtained at the initial reduction period. CaSO{sub 4} oxygen carrier exhibited high reactivity initially and decreased gradually at the late period of reduction. The sulfur release during the reduction of CaSO{sub 4} as oxygen carrier was also observed and analyzed. H{sub 2} and CO{sub 2} conversions were greatly influenced by reduction temperature. The oxygen carrier conversion and mass-based reaction rates during the reduction at typical temperatures were compared. Higher temperatures would enhance reaction rates and result in high conversion of oxygen carrier. An XRD patterns study indicated that CaS was the dominant product of reduction and the variation of relative intensity with temperature is in agreement with the solid conversion. ESEM analysis indicated that the surface structure of oxygen carrier particles changed significantly from impervious to porous after reduction. EDS analysis also demonstrated the transfer of oxygen from the oxygen carrier to the fuel gas and a certain amount of sulfur loss and CaO formation on the surface at higher temperatures. The reduction kinetics of CaSO{sub 4} oxygen carrier was explored with the shrinking unreacted-core model. The apparent kinetic parameters were obtained, and the kinetic equation well predicted the experimental data. Finally, some basic considerations on the use of CaSO{sub 4} oxygen carrier in a CLC system for solid fuels were discussed.

01 COAL, LIGNITE, AND PEAT↗

Evaluation of the lgnitability Hazards in Remediated Nitrate Salt Waste

The hazards associated with the characteristic of ignitability in remediated nitrate salt (RNS) waste containing nitric acid (HNO 3 ) and metal nitrate salts, currently stored at the Waste Control Specialists (WCS) facility near Andrews, Texas have been evaluated. For these waste drums there are two ignitability hazards that may apply, each separately distinguished from the other and uniquely correlated to one of two competing reaction mechanisms. One ignitability hazard, designated the autocatalytic thermal runway, is uniquely correlated to an acid/base reaction of hydrolysis of a hydrated metal nitrate salt. The other applicable ignitability hazard, designated the oxidizer property, is uniquely correlated to a redox disproportionation reaction involving an anhydrous metal nitrate salt. Which reaction mechanism pathway is accessible to a given metal nitrate, and therefore which ignitability hazard may apply, depends on the acidity of the metal ion and its corresponding capacity to maintain coordination with water.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Conformational Control as a Design Strategy to Tune the Redox Behavior of Benzotriazole Negolytes for Nonaqueous Flow Batteries

Here, we present a molecular engineering strategy to tune the reduction potentials of benzotriazole derivatives as high-energy-density negolytes in nonaqueous redox flow batteries. Within nonaqueous electrolytes, these derivatives, notably 2-(o-tolyl)-2H-benzo[d][1,2,3]triazole (1), demonstrate a theoretical capacity of up to 93.8 Ah L⁻¹ and a reduction potential of –2.35 V vs ferrocene/ferrocenium (Fc/Fc⁺). Introducing dimethyl substitution (i.e., 2-(2,6-dimethylphenyl)-2H-benzo[d][1,2,3]triazole (4)) shifts the reduction potential even more negatively to –2.55 V vs Fc/Fc⁺. We ascribe the nonlinear effect of dimethyl substitution on reduction potential to ground-state conformational effects. Flow battery tests with negolyte 1 and ferrocene posolyte demonstrated >90% Coulombic efficiency at 6.7 mA cm⁻² with improved cyclability in the presence of lithium bis(trifluoromethylsuylfonyl)imide supporting salt.

25 ENERGY STORAGE↗

Sub-Nanometer Nanoclusters of Copper Atop Single-Atom Copper Moieties toward Electrochemical CO 2 Hydrogenation to Methane

The electrochemical CO 2 reduction (eCO 2 R) offers a compelling route for converting CO 2 into value-added fuels and chemicals. Among CO 2 -derived products, methane (CH 4 ) occupies a distinct position, serving both as a key intermediate for emerging cascade electro-oxidation to oxygenates and as a strategically important extraterrestrial fuel that can be generated in situ from off-planet CO 2 resources. Although Cu-based catalysts capable of selectively producing CH 4 have been reported, they seldom sustain high selectivity at practically relevant current densities. Here, we created a single-step co-pyrolysis strategy toward generating and anchoring Cu sub-nanometer clusters (Cu SNC ) atop Cu-N x single-atom (SA) motifs embedded within N-doped carbon (NC), with controllable nanostructures through tuning of the synthesis parameters. Complementary spectroscopic analyses and density functional theory (DFT) calculations help reveal a structure−activity correlation that could guide the catalyst design. The Cu SNC @NC sample synthesized at 550 °C pyrolysis temperature (best described and modeled as Cu 3 -CuN 4 domains) represents the most effective combination of cluster size, metal-nitrogen coordination, and adsorption energetics needed to selectively promote CH 4 generation versus other eCO 2 R products. Incorporating pulsed electrolysis and hydrophobicity-modulated transport tuning at the triple-phase boundary (TPB) further enhanced CH 4 production achieving a partial CH 4 current density of ∼321 mA cm −2 , 53% Faradaic efficiency (FECH 4 ), and less than 4% combined FE for other eCO 2 R products, simplifying downstream CH 4 purification or upgrading. This work establishes generalizable principles for controlling Cu cluster atomicity and metal−nitrogen coordination, both of which are recognized determinants of CH 4 -efficient eCO 2 R.

CH4 production↗

Metal–Ligand Cooperativity via Exchange Coupling Promotes Iron- Catalyzed Electrochemical CO 2 Reduction at Low Overpotentials

Biological and heterogeneous catalysts for the electrochemical CO 2 reduction reaction (CO 2 RR) often exhibit a high degree of electronic delocalization that serves to minimize overpotential and maximize selectivity over the hydrogen evolution reaction (HER). Here, we report a molecular iron(II) system that captures this design concept in a homogeneous setting through the use of a redox non-innocent terpyridine-based pentapyridine ligand (tpyPY2Me). As a result of strong metal-ligand exchange coupling between the Fe(II) center and ligand, [Fe(tpyPY2Me)] 2+ exhibits redox behavior at potentials 640 mV more positive than the isostructural [Zn(tpyPY2Me)] 2+ analog containing the redox-inactive Zn(II) ion. This shift in redox potential is attributed to the requirement for both an open-shell metal ion and a redox non-innocent ligand. The metal-ligand cooperativity in [Fe(tpyPY2Me)] 2+ drives the electrochemical reduction of CO 2 to CO at low overpotentials with high selectivity for CO 2 RR (>90%) and turnover frequencies of 100,000 s -1 with no degradation over 20 h. The decrease in the thermodynamic barrier engendered by this coupling also enables homogeneous CO 2 reduction catalysis in water without compromising selectivity or rates. Synthesis of the two-electron reduction product, [Fe(tpyPY2Me)] o , and characterization by X-ray crystallography, Mössbauer spectroscopy, X-ray absorption spectroscopy (XAS), variable temperature NMR, and density functional theory (DFT) calculations, support assignment of an open-shell singlet electronic structure that maintains a formal Fe(II) oxidation state with a doubly reduced ligand system. Furthermore, this work provides a starting point for the design of systems that exploit metal-ligand cooperativity for electrocatalysis where the electrochemical potential of redox non-innocent ligands can be tuned through secondary metal-dependent interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syngas chemical looping gasification process: oxygen carrier particle selection and performance

The syngas chemical looping (SCL) process coproduces hydrogen and electricity. The process involves reducing metal oxides with syngas followed by regeneration of reduced metal oxides with steam and air in a cyclic manner. Iron oxide is determined to be a desired oxygen carrier for hydrogen production considering overall properties including oxygen carrying capacity, thermodynamic properties, reaction kinetics, physical strength, melting points, and environmental effects. An iron oxide based particle can maintain good reactivity for more than 100 reduction-oxidation (redox) cycles in a thermogravimetric analyzer (TGA). The particle exhibits a good crushing strength (>20 MPa) and low attrition rate. Fixed bed experiments are carried out which reaffirm its reactivity. More than 99.75% of syngas is converted during the reduction stage. During the regeneration stage, hydrogen with an average purity of 99.8% is produced. 23 refs., 6 figs., 10 tabs.

01 COAL, LIGNITE, AND PEAT↗

Phenol Deoxygenation Mechanisms on Fe(110) and Pd(111)

The catalytic deoxygenation of phenolic compounds has become a major area of interest in recent years as they are produced during the pyrolysis of lignin and are present in biofuels. Our previous work showed that a PdFe bimetallic catalyst was catalytically active for the deoxygenation of phenolics. In order to better understand and control the catalytic deoxygenation reaction of phenolics, the detailed surface reaction mechanisms are needed for phenol, a key intermediate in phenolic deoxygeantion. Here, we have examined five distinct reaction mechanisms for the deoxygenation of phenol on the Fe (110) and Pd (111) surfaces so as to identify the most likely deoxygenation mechanism on these surfaces. Here, our results show that the elementary phenol deoxygenation reaction step for each mechanism was highly endothermic on Pd (111) while the same mechanisms are exothermic on Fe (110). Based on the reaction energy studies, detailed mechanistic studies were performed on the Fe (110) surface and it was found that the most energetically and kinetically favorable reaction mechanism occurs via the direct cleavage of the C-O bond.

09 BIOMASS FUELS↗

General Kinetic Model for pH Dependence of Proton-Coupled Electron Transfer: Application to an Electrochemical Water Oxidation System

The pH dependence of proton-coupled electron transfer (PCET) reactions, which are critical to many chemical and biological processes, is a powerful probe for elucidating their fundamental mechanisms. Herein, a general, multichannel kinetic model is introduced to describe the pH dependence of both homogeneous and electrochemical PCET reactions. According to this model, a weak pH dependence can arise from the competition among multiple sequential and concerted PCET channels involving different forms of the redox species, such as protonated and deprotonated forms, as well as different proton donors and acceptors. The contribution of each channel is influenced by the relative populations of the reactant species, which often depend strongly on pH, leading to complex pH dependence of PCET apparent rate constants. This model is used to explain the origins of the experimentally observed weak pH dependence of the electrochemical PCET apparent rate constant for a ruthenium-based water oxidation catalyst attached to a tin-doped In2O3 (ITO) surface. The weak pH dependence is found to arise from the intrinsic differences in the rate constants of participating channels and the dependence of their relative contributions on pH. This model predicts that the apparent maximum rate constant will become pH-independent at higher pH, which is confirmed by experimental measurements. Our analysis also suggests that the dominant channels are electron transfer at lower pH and sequential PCET via electron transfer followed by fast proton transfer at higher pH. Furthermore, this work highlights the importance of considering multiple competing channels simultaneously for PCET processes.

Catalysts↗

Metal–support interactions in metal oxide-supported atomic, cluster, and nanoparticle catalysis

Supported metal catalysts are essential to a plethora of processes in the chemical industry. The overall performance of these catalysts depends strongly on the interaction of adsorbates at the atomic level, which can be manipulated and controlled by the different constituents of the active material (i.e., support and active metal). The description of catalyst activity and the relationship between active constituent and the support, or metal–support interactions (MSI), in heterogeneous (thermo)catalysts is a complex phenomenon with multivariate (dependent and independent) contributions that are difficult to disentangle, both experimentally and theoretically. So-called “strong metal–support interactions” have been reported for several decades and summarized in excellent review articles. However, in recent years, there has been a proliferation of new findings related to atomically dispersed metal sites, metal oxide defects, and, for example, the generation and evolution of MSI under reaction conditions, which has led to the designation of (sub)classifications of MSI deserving to be critically and systematically evaluated. These include dynamic restructuring under alternating redox and reaction conditions, adsorbate-induced MSI, and evidence of strong interactions in oxide-supported metal oxide catalysts. Here, we review recent literature on MSI in oxide-supported metal particles to provide an up-to-date understanding of the underlying physicochemical principles that dominate the observed effects in supported metal atomic, cluster, and nanoparticle catalysts. Critical evaluation of different subclassifications of MSI is provided, along with discussions on the formation mechanisms, theoretical and characterization advances, and tuning strategies to manipulate catalytic reaction performance. We also provide a perspective on the future of the field, and we discuss the analysis of different MSI effects on catalysis quantitatively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗