Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECYCLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Pollution to products: recycling of ‘above ground’ carbon by gas fermentation

Climate crisis and rapid population growth are posing some of the most pressing challenges to mankind and have intensified the need for the deployment of carbon recycling and carbon capture and utilization (CCU) technologies. Gas fermentation offers a solution using carbon-fixing chemolithoautotrophic microorganisms. After a decade of scale up, the technology has recently been commercialized with the first plant operating successfully since 2018 and additional units under construction. Gas fermentation offers unique feedstock and product flexibility when compared to other available gas-to-liquid technologies. Advancements in process technology and synthetic biology enable a broad range of feedstocks including emissions from industry or syngas generated from any biomass resource to be converted into a wide range of molecules realizing a circular economy.

09 BIOMASS FUELS↗

Hydrogen and helium recycling from a JxB -force convected liquid metal Ga 67 In 20.5 Sn 12.5 under steady state plasma bombardment

A series of first-of-a-kind laboratory-scale experiments on the JxB-force convected liquid metal divertor concept have been carried out in the temperature range from room temperature to ~200 °C, employing a eutectic alloy: Ga 67 In 20.5 Sn 12.5 , the melting point of which is 10.5 °C. The electrical current conducted through the alloy is set at about 70A and the magnetic field is set at about 700 G. Finally, it has reproducibly been observed that hydrogen as well as helium particle recycling is noticeably reduced under steady state plasma bombardment when the liquid is convected by the JxB force.

08 HYDROGEN↗

Atomic and ionic hydrogen flux probe for quantitative in-situ monitoring of hydrogen recycling

A new combination diagnostic as a hydrogen recycling monitor in harsh conditions is proposed. Combining permeation membrane probe with a Langmuir probe provides a possibility to measure both atomic and ionic hydrogen fluxes to plasma facing components. A brief overview of permeation probes is given. The range of measurable H fluxes is from 10 16 to more than 10 20 H m –2 s –1 . Time response of the permeation probe is ~ 0.1–0.5 s. A method to address disadvantages of permeation probes is proposed. This includes an introduction of a preparation chamber for Ar-plasma cleaning of the membrane and absolute calibration with a visible spectroscopy. The hydrogen recombination coefficient, evaluated in such calibration, is k u = 5.9 × 10 –30 m 4 s –1 , which agrees well with previous research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Abiotic phosphorus recycling from adsorbed ribonucleotides on a ferrihydrite-type mineral: Probing solution and surface species

Iron (Fe) (oxyhydr)oxide minerals, which are amongst most reactive minerals in soils and sediments, are known to exhibit strong adsorption of inorganic phosphate (P i ) and organophosphate (P o ) compounds. Beyond synthetic P o compounds, much still remains unknown about the reactivity of these minerals to transform naturally-occurring P o compounds to P i , particularly with respect to solution versus surface speciation of P o hydrolysis. To investigate this reactivity with a ferrihydrite-type mineral and ribonucleotides, we employed high-resolution liquid chromatography-mass spectrometry (LC-MS), X-ray absorption near-edge structure (XANES), Fourier-transform infrared (FTIR) spectroscopy, and molecular modeling. Kinetic experiments were conducted with the mineral (1 g L -1 ) reacted with adenosine monophosphate, diphosphate, or triphosphate (respectively AMP, ADP, ATP; 50 µM). Analysis of solution organic species by LC-MS implied that only adsorption occurred with AMP and ADP but both adsorption and dephosphorylation of ATP were evident. Maximum adsorption capacities per gram of mineral were 40.6 ± 0.8 µmol AMP, 35.7 ± 1.6 µmol ADP, and 10.9 ± 1.0 µmol ATP; solution dephosphorylated by-products accounted for 15% of initial ATP. Subsequent XANES analysis of the surface species revealed that 16% of adsorbed AMP and 30% of adsorbed ATP were subjected to dephosphorylation, which was not fully quantifiable from the solution measurements. Molecular simulations predicted that ADP and ATP were complexed mainly via the phosphate groups whereas AMP binding also involved multiple hydrogen bonds with the adenosine moiety; our FTIR data confirmed these binding confirmations. Lastly, our findings thus imply that specific adsorption mechanisms dictate the recycling and subsequent trapping of Pi from ribonucleotide-like biomolecules reacted with Fe (oxyhydr)oxide minerals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of a high-temperature inorganic synthetic foam with recycled fly-ash cenospheres for thermal insulation brick manufacturing

In this study, a novel inorganic synthetic solid foam composed of recycled fly-ash cenospheres (FACs) is developed with low-density, good thermal insulation performance, and reasonable mechanical strength. The manufacturing process utilizes low-fraction clay binder materials diluted in water, enabling a self-assembling mechanism assisted by natural capillary effect to form minimal contacts among the FACs. The microstructure and minimal contact formation were confirmed by optical and electron microscope imaging. Both thermal and mechanical properties of the fly-ash cenosphere synthetic solid foam (FAC-SSF) materials were experimentally studied as functions of key material parameters including cenosphere particle size and clay content. A numerical model was developed to predict the effective thermal conductivity of FAC-SSF using a three-step homogenization method which takes into account different thermal percolation paths within the material. The inorganic synthetic foam developed has the potential for thermal insulation applications taking advantage of their relatively simple, low-cost, and scalable manufacturing process, minimal use of binder materials, and relatively high mechanical strength and highly tailorable properties.

42 ENGINEERING↗

Recycled polyethylene and crumb rubber composites modified asphalt with improved aging resistance and thermal stability

Crumb rubbers (CR) and recycled Polyethylene (PE) are commonly used as modifiers to improve the asphalt properties. However, the addition of these modifiers individually may result in phase separation of PE and inadequate degradation of CR, which may not simultaneously satisfy the rheological and aging resistance of the binder blends. In this study, a type of CR/PE composites manufactured through melt extrusion procedures was adopted for the improvement of the modified binder blends. The modified binder blends after short-term (RTFO) and long-term (PAV) aging were collected for dynamic shear rheometer and bending beam rheometer tests. FTIR tests were also used to quantify the aging resistance, while differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were applied to evaluate the thermal behaviors of the binder blends. Optical microscopy tests were used to explore the modification mechanism and visualize the microstructures of original and PAV aged binder blends. Test results showed that CR/PE composites could significantly improve the aging resistance of the binder blends. The dispersed PE particles still interacted with each other and meanwhile worked with the diffused rubbery phase, which could form a similar TPEs network. The oxidation and high-temperature aging of such binder blends would strengthen the network that resisted the aging severity of the binder blends. Furthermore, it was also revealed that CR/PE modified asphalt could sustain more heat before a rapid degradation and the well-dispersed PE particles could interact with the diffused CR particles to form a network to resist aging.

02 PETROLEUM↗

Dependence of recycling and edge profiles on lithium evaporation in high triangularity, high performance NSTX H-mode discharges

In this paper, the effects of a pre-discharge lithium evaporation variation on highly shaped discharges in the National Spherical Torus Experiment (NSTX) are documented. Lithium wall conditioning ('dose') was routinely applied onto graphite plasma facing components between discharges in NSTX, partly to reduce recycling. Reduced D-alpha, emission from the lower and upper divertor and center stack was observed, as well as reduced midplane neutral pressure; the magnitude of reduction increased with the pre-discharge lithium dose. Improved energy confinement, both raw tau(E) and H-factor normalized to scalings, with increasing lithium dose was also observed. At the highest doses, we also observed elimination of edge-localized modes. The midplane edge plasma profiles were dramatically altered, comparable to lithium dose scans at lower shaping, where the strike point was farther from the lithium deposition centroid. This indicates that the benefits of lithium conditioning should apply to the highly shaped plasmas planned in NSTX-U. (C) 2014 Elsevier B.V. All rights reserved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low temperature hydrogen plasma permeation in palladium and its alloys for fuel recycling in fusion systems

Superpermeation of hydrogen isotopes through metal foils is a critical component for efficient fuel recycling in fusion power systems. In that context hydrogen permeation through foils of palladium and its alloys with silver and copper was studied at low temperature (60 - 200°C) under plasma exposure. These alloys differ significantly in both bulk and surface properties, and comparisons can provide mechanistic insights. Here, permeation was observed only during plasma operation, confirming the negligible contribution of molecular hydrogen to the observed flux. As-received foils required surface treatment to achieve top performance. For Pd and Pd75Ag25 an oxidation treatment increased permeation an order of magnitude, but proved unstable as this desirable surface was reduced under hydrogen plasma exposure. In contrast, an Ar plasma cleaning step provided both high and stable flux. As-received FCC phase Pd60Cu40 foils required annealing to transform it into the high permeability BCC phase that delivered top performance. All foils displayed similar temperature dependence with flux declining with temperature, suggesting that the primary rate-limiting step is absorption of superthermal hydrogen. Among these foils the hydrogen flux through PdCu was 3 - 5X greater than that of Pd or PdAg, which were similar. The superiority of BCC PdCu is attributed to its superior hydrogen desorption kinetics. Using PdCu 100% permeation of supplied hydrogen was achieved, and the flux saturated with increasing plasma power at values >10 –2 mol H•m –2 •s– 1 , and under these conditions permeation rates are equivalent with or without the membrane present. The fluxes achieved are the highest reported to date at these conditions, and the results highlight the important roles of both surface and bulk properties.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fe{sub 2.25}W{sub 0.75}O{sub 4}/reduced graphene oxide nanocomposites for novel bifunctional photocatalyst: One-pot synthesis, magnetically recyclable and enhanced photocatalytic property

Fe{sub 2.25}W{sub 0.75}O{sub 4}/reduced graphene oxide (RGO) composites were prepared for application of novel bifunctional photocatalyst via simple one-pot hydrothermal method, employing graphene oxide (GO), Na{sub 2}WO{sub 4}, FeSO{sub 4} and sodium dodecyl benzene sulfonate (SDBS) as the precursors. Transmission electron microscope (TEM) results indicate that the well-dispersed Fe{sub 2.25}W{sub 0.75}O{sub 4} nanoparticles were deposited on the surface of RGO sheets homogeneously. Magnetic characterization reveals that Fe{sub 2.25}W{sub 0.75}O{sub 4} and Fe{sub 2.25}W{sub 0.75}O{sub 4}/RGO show ferromagnetic behaviors. So this novel bifunctional photocatalyst could achieve magnetic separation and collection with the aid of external magnet. The composites exhibit enhanced photocatalytic performance on degradation of methyl orange (MO) compared with pure Fe{sub 2.25}W{sub 0.75}O{sub 4} under low-power ultraviolet light irradiation due to the introduction of RGO. Moreover, this hybrid catalyst possesses long-term excellent photocatalytic performance due to its good thermal stability. This bifunctional photocatalyst, which combines magnetic property and excellent photocatalytic activity, would be a perfect candidate in applications of catalytic elimination of environmental pollutants and other areas. - Graphical abstract: Magnetically recyclable Fe{sub 2.25}W{sub 0.75}O{sub 4}/reduced graphene oxide nanocomposites with enhanced photocatalytic property Display Omitted - Highlights: ●Fe{sub 2.25}W{sub 0.75}O{sub 4} growth, deposition and GO reduction occurred simultaneously. ●Composite possessed ferromagnetic and enhanced photocatalytic properties. ●Composite is utilized as a magnetically separable and high-efficient photocatalyst. ●Photocatalyst showed good photocatalytic and thermal stability during cyclic use.

36 MATERIALS SCIENCE↗

Synthesis of magnetically recyclable ZIF-8@SiO{sub 2}@Fe{sub 3}O{sub 4} catalysts and their catalytic performance for Knoevenagel reaction

Novel magnetic ZIF-8@SiO{sub 2}@Fe{sub 3}O{sub 4} catalysts were synthesized by encapsulating magnetic SiO{sub 2}@Fe{sub 3}O{sub 4} nanoparticles into ZIF-8 through in situ method. The structures of the catalysts were characterized by TEM, SEM, XRD, FT-IR, VSM, N{sub 2} adsorption/desorption and CO{sub 2}-TPD technology. The catalytic activity and recovery properties of the catalysts for the Knoevenagel reaction of p-chlorobenzaldehyde with malononitrile were evaluated. The results showed that the magnetic ZIF-8@SiO{sub 2}@Fe{sub 3}O{sub 4} catalysts had the larger surface areas, the suitable superparamagnetism, and good catalytic activity for Knoevenagel reaction. The conversion of p-chlorobenzaldehyde can reach ~98% and the selectivity of the production can reach ~99% over35.8%ZIF-8@SiO{sub 2}@Fe{sub 3}O{sub 4} (MZC-5) catalyst under the reaction condition of 25 °C and 4 h. The magnetic ZIF-8@SiO{sub 2}@Fe{sub 3}O{sub 4} catalysts also had good substrates adaptation. After reaction, the catalyst can be easily separated from the reaction mixture by an external magnet. The recovery catalyst can be reused five times and the conversion of p-chlorobenzaldehyde can be kept over 90%. - Graphical abstract: Novel magnetically recyclable ZIF-8@SiO{sub 2}@Fe{sub 3}O{sub 4} catalysts were synthesized by encapsulating magnetic SiO{sub 2}@Fe{sub 3}O{sub 4} nanoparticles into ZIF-8 and the as-synthesized catalysts exhibited a good catalytic activity for the Knoevenagel reaction. - Highlights: • A series of novel magnetic ZIF-8@SiO{sub 2}@Fe{sub 3}O{sub 4} catalysts were synthesized. • The catalysts had the larger surface areas and the suitable superparamagnetism. • The catalysts exhibited good catalytic activity for the Knoevenagel reaction. • After reaction the catalyst can be easily separated by an external magnet. • The recovery catalyst can be reused five times and can keep its catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pd-porphyrin functionalized ionic liquid-modified mesoporous SBA-15: An efficient and recyclable catalyst for solvent-free Heck reaction

The Pd-porphyrin functionalized ionic liquid could be covalently anchored in the channels of mesoporous SBA-15 through ion-pair electrostatic interaction between imidazolium-cationic and Pd-porphyrin-anionic moieties. Such modified SBA-15 materials were prepared successfully via a post-synthesis (surface sol-gel polymerization) or a one-pot sol-gel procedure, which were characterized by powder X-ray diffraction, UV-visible spectroscopy, Fourier transform infrared spectroscopy, N{sub 2} sorption, elemental analysis, and transmission electron microscopy. The modified SBA-15 materials are efficient and recyclable catalysts for cross-coupling of aryl iodides or activated aryl bromides with ethyl acrylate without activity loss and Pd leaching even after 9 runs.

36 MATERIALS SCIENCE↗

Soft chemical synthesis of Ag{sub 3}SbS{sub 3} with efficient and recyclable visible light photocatalytic properties

Highlights: • Highly crystalline Ag{sub 3}SbS{sub 3} synthesized using soft chemical approach. • First time report of photocatalytic activity of Ag{sub 3}SbS{sub 3}. • Ag{sub 3}SbS{sub 3} degraded the harmful organic dyes rapidly under visible radiation. • Pseudo first order kinetics have been followed in these sets of reactions. • Up to 90% of Methylene Blue degraded even after 4th cycle of catalyst reuse. • Structure of catalyst is intact after reuse. • As the catalyst is heavy, its separation after use is quite simple. - Abstract: Application of Ag{sub 3}SbS{sub 3}, obtained by soft chemical approach involving rapid reaction of air stable metal–thiourea complexes in ethylene glycol medium, as visible light photocatalyst for the degradation of dye solutions was investigated. Ag{sub 3}SbS{sub 3} was confirmed by high resolution powder X-ray diffraction pattern and its no defined morphology was present in SEM images. From UV–vis spectroscopy measurements, optical band gap of 1.77 eV was deduced for Ag{sub 3}SbS{sub 3}. Rapid degradation kinetics and recyclability was exhibited by Ag{sub 3}SbS{sub 3} towards Methylene Blue, Methyl Orange, Malachite Green, and Rhodamine 6G dye solutions under visible radiation. All these processes followed pseudo first order kinetics. High surface area (6.39 m{sup 2}/g), with mesopores (3.81 nm), arising from solvent mediated synthesis of Ag{sub 3}SbS{sub 3} has been correlated to its catalytic activity.

36 MATERIALS SCIENCE↗

A printed, recyclable, ultra-strong, and ultra-tough graphite structural material

The high mechanical performance of common structural materials (e.g., metals, alloys, and ceramics) originates from strong primary bonds (i.e., metallic, covalent, ionic) between constituent atoms. However, the large formation energy of primary bonds requires high temperatures in order to process these materials, resulting in significant manufacturing costs and a substantial environmental footprint. In this work, we report a strategy to leverage secondary bonds (e.g., hydrogen bonds) to produce a high-performance and low-cost material that outperforms most existing structural compounds. By dispersing graphite flakes and nanofibrillated cellulose (NFC) in water at room temperature to form a stable and homogeneous solution with a high solid concentration (20 wt%), we demonstrate this slurry can be scalably printed to manufacture a graphite-NFC composite that exhibits a high tensile strength (up to 1.0 GPa) and toughness (up to 30.0 MJ/m 3 ). The low density of graphite and cellulose leads to a specific strength of the composite (794 MPa/(g cm -3 )) that is significantly greater than most engineering materials (e.g., steels, aluminum, and titanium alloys). We demonstrate how hydrogen bonds between the graphite flakes and NFC play a pivotal role in the superb mechanical performance of the composite, also enabling this low-cost material to be recyclable for an environmentally sustainable solution to high performance structural materials.

36 MATERIALS SCIENCE↗

Magnetically recyclable nanocomposites via lanthanide-based MOFs grown on natural sea sponge: Screening hydrogenation of nitrophenol to aminophenol

Catalysts have played a significant role in chemical industries and received significant attention as a result. Unfortunately, many common catalytic systems are comprised of a small number of elemental species or use similar synthetic strategies, which potentially limit innovation in areas such as the discovery of new transformations. Metal-organic frameworks (MOFs) have been established as versatile materials employed in various applications that include catalysis; however, the majority of MOFs have been synthesized using transition metal building blocks, possibly hindering advances towards innovative materials with unique properties. Here this work reports the synthesis of MOFs based on lanthanide elements (Ln = Ce, Gd, La, and Sm), which demonstrate great potential yet are often overlooked. The Ln-based MOFs were grown in situ on natural sea sponge supports and Fe ion containing solution, followed by a thermal carbonization treatment to generate FeLn metal nanoparticles (NPs) embedded on carbon support (FeLn@C). These nanostructured products exhibited good crystallinity and well-confined particle sizes. We then demonstrate that these hybrid materials can be used as effective heterogeneous nanocatalysts for the hydrogenation of nitrophenol to aminophenol in aqueous media. Besides, FeLn@C catalysts had a magnetic property due to Fe atoms in the NPs, which can be mechanically separated out from the aqueous solution since the catalysts are magnetically attracted to the external magnets. This magnetic recyclability combined with the usage of the natural materials highlight the importance of sustainability in the design of Ln-based MOFs and their catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

EDGE2D-EIRENE predictions of molecular emission in DIII-D high-recycling divertor plasmas

The contributions of deuterium molecular emission to the total deuterium radiation was assessed in DIII-D ohmically-confined plasmas in high-recycling divertor conditions. Radial profiles of the deuterium Ly-α line intensity across the low-field side divertor leg were obtained with the recently installed divertor Survey Poor Resolution, Extended Spectrometer [1]. A high-resolution spectrometer was used to measure the poloidal profiles of the deuterium Balmer-α and the deuterium Fulcher-α band intensity in the visible wavelength range. The scrape-off layer plasma and neutral distributions were simulated using the edge fluid EDGE2D-EIRENE [2], and the numerical solutions constrained utilizing Thomson scattering and Langmuir probe measurements at the low-field side midplane and the divertor target plate. The studies show that for these conditions molecular emission plays a negligible role in the total radiative power balance of the low-field side divertor, but molecular processes are important when evaluating deuterium Balmer-α line intensity for code-experiment validation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Complex exposure-burial history and Pleistocene sediment recycling in the dead sea rift with implications for the age of the Acheulean site of ‘Ubeidiya

Here, we present early Pleistocene burial ages of the ‘Ubeidiya Formation sediments in the Jordan Valley, a segment of the Dead Sea Rift Valley. A minimum age of ∼1.1 Ma is constrained both by paleomagnetic analysis and U-Pb dating of Melanopsis shells. Simple cosmogenic burial ages (i.e., one very long exposure period followed by one period of burial) calculated from the ratios of 26 Al to 10 Be and 10 Be concentrations indicate ages of ∼3 Ma, contradicting the geological and paleomagnetic constraints as well as a reasonable age of the ‘Ubeidiya archeological site, as it contains human remains. A more sophisticated way of treating the results, by combining numerical modeling of cosmogenic nuclide build up during repeated burial-exposure cycles, paleomagnetic analysis (indicating reverse polarity) and a minimum burial age of 1.1 Ma set by U-Pb dating of Melanopsis shells, suggests two most probable time slots (1.19-1.77 and 1.93- 2.14 Ma) for the absolute age of the ‘Ubeidiya Formation. However, the skewed distribution of cosmogenic isotope burial ages, with a median age of 2.05 Ma, indicates a much higher probability of the older ages, most likely >1.9 Ma. The exposure-burial history that emerges from the model implies recycling of sediments previously deposited and buried in the rift valley, between 4.5 and 3.2 Ma, and subsequently exhumed, eroded, transported and then redeposited along the ‘Ubeidiya paleo lake shoreline.

Acheulean↗

Jianlin Li: Accelerating battery manufacturing and recycling

With continued penetration of consumer electronics and electric vehicles into the evergrowing marketplace, there is a critical need for an efficient and sustainable battery supply chain. This includes the production of raw materials, the design, development, and processing of cell materials and systems, and end-of-life product recycling. The Oak Ridge National Laboratory (ORNL) has established a research program dedicated to addressing many aspects of these key challenges. Here, we asked Jianlin Li, a Senior R&D Staff and leader of the Energy Storage and Conversion Manufacturing Group, his opinion on the role of chemistry and materials science in mitigating the impacts of critical materials in battery supply chains.

25 ENERGY STORAGE↗

Chemical-mineralogical characterization of C and D waste recycled aggregates from Sao Paulo, Brazil

This study presents a methodology for the characterization of construction and demolition (C and D) waste recycled aggregates based on a combination of analytical techniques (X-ray fluorescence (XRF), soluble ions, semi-quantitative X-ray diffraction (XRD), thermogravimetric analysis (TGA-DTG) and hydrochloric acid (HCl) selective dissolution). These combined analytical techniques allow for the estimation of the amount of cement paste, its most important hydrated and carbonated phases, as well as the amount of clay and micas. Details of the methodology are presented here and the results of three representative C and D samples taken from the Sao Paulo region in Brazil are discussed. Chemical compositions of mixed C and D aggregate samples have mostly been influenced by particle size rather than the visual classification of C and D into red or grey and geographical origin. The amount of measured soluble salts in C and D aggregates (0.15-25.4 mm) is lower than the usual limits for mortar and concrete production. The content of porous cement paste in the C and D aggregates is around 19.3% (w/w). However, this content is significantly lower than the 43% detected for the C and D powders (<0.15 mm). The clay content of the powders was also high, potentially resulting from soil intermixed with the C and D waste, as well as poorly burnt red ceramic. Since only about 50% of the measured CaO is combined with CO{sub 2}, the powders have potential use as raw materials for the cement industry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗