Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Physics regularization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Remediation of Occupied Commercial Property Subject to Widespread Radium-226 Contamination: Update from WM2012 Paper - 16652

Amec Foster Wheeler was contacted by a company that managed commercial office space. High Rn-222 measurements had been observed throughout the facility and the landlord had been advised to commission a radiological survey of the site. The site had been purchased by the client in the 1990's. Initial desk studies found that the building had operated for around 50 years as a compass factory. Non-intrusive investigation identified widespread Ra-226 contamination. Ra-226 was found in the fabric of the building, in attic spaces, buried under floor boards and underlying car parks. Intrusive investigation was undertaken to estimate volume(s) of waste, waste categories, activity concentrations and the total inventory of radioactive materials on site. This work identified the presence of 180 GBq of Ra-226 on site. A programme of work is currently underway to remediate the site tackling areas posing the greatest risk to site occupants as a priority. We have worked closely with Regulators, our client, and tenants, to decontaminate the fabric of the building whilst areas of the building remain occupied. Early decontamination works identified that radon levels within the building were stubbornly high despite the removal of radium contamination. An independent radon source was suspected. A contaminated drain was discovered leading to a blocked-off river race running under the old mill building. A significant quantity of radium contaminated sludge was identified within the river race. This was believed to be the source of the excessive radon concentrations within the building. The paper will present work undertaken to investigate and remediate the inventory of sludge from beneath the building. It will describe the operational difficulties of working within a dynamic environment impacted by high dose rates, high radon concentrations, water ingress and waste retrieval challenges. The paper will present the radiological and environmental impacts of the work and detail the achieved end points. This was a challenging project working in confined spaces impacted by physical and radiological constraints. The remedial action undertaken significantly reduced radon concentrations in the building metres above the river race. It also significantly reduced the likelihood of radium contamination being mobilised into the river and the wider environment. The achieved end point permitted the building to return to uncontrolled commercial use. The end point achieved within the river race will ensure a safe working environment for future regular structural survey work. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Physical results from 2+1 flavor domain wall QCD and SU(2) chiral perturbation theory

We have simulated QCD using 2+1 flavors of domain wall quarks and the Iwasaki gauge action on a (2.74 fm){sup 3} volume with an inverse lattice scale of a{sup -1}=1.729(28) GeV. The up and down (light) quarks are degenerate in our calculations and we have used four values for the ratio of light quark masses to the strange (heavy) quark mass in our simulations: 0.217, 0.350, 0.617, and 0.884. We have measured pseudoscalar meson masses and decay constants, the kaon bag parameter B{sub K}, and vector meson couplings. We have used SU(2) chiral perturbation theory, which assumes only the up and down quark masses are small, and SU(3) chiral perturbation theory to extrapolate to the physical values for the light quark masses. While next-to-leading order formulas from both approaches fit our data for light quarks, we find the higher-order corrections for SU(3) very large, making such fits unreliable. We also find that SU(3) does not fit our data when the quark masses are near the physical strange quark mass. Thus, we rely on SU(2) chiral perturbation theory for accurate results. We use the masses of the {omega} baryon, and the {pi} and K mesons to set the lattice scale and determine the quark masses. We then find f{sub {pi}}=124.1(3.6){sub stat}(6.9){sub syst} MeV, f{sub K}=149.6(3.6){sub stat}(6.3){sub syst} MeV, and f{sub K}/f{sub {pi}}=1.205(0.018){sub stat}(0.062){sub syst}. Using nonperturbative renormalization to relate lattice regularized quark masses to regularization independent momentum scheme masses, and perturbation theory to relate these to MS, we find m{sub ud}{sup MS}(2 GeV)=3.72(0.16){sub stat}(0.33){sub ren}(0.18){sub syst} MeV, m{sub s}{sup MS}(2 GeV)=107.3(4.4){sub stat}(9.7){sub ren}(4.9){sub syst} MeV, and m-tilde{sub ud} ratio m-tilde{sub s}=1 ratio 28.8(0.4){sub stat}(1.6){sub syst}. For the kaon bag parameter, we find B{sub K}{sup MS}(2 GeV)=0.524(0.010){sub stat}(0.013){sub ren}(0.025){sub syst}. Finally, for the ratios of the couplings of the vector mesons to the vector and tensor currents (f{sub V} and f{sub V}{sup T}, respectively) in the MS scheme at 2 GeV we obtain f{sub {rho}}{sup T}/f{sub {rho}}=0.687(27); f{sub K*}{sup T}/f{sub K*}=0.712(12), and f{sub {phi}}{sup T}/f{sub {phi}}=0.750(8)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-temperature expansion of supersymmetric partition functions

Di Pietro and Komargodski have recently demonstrated a four-dimensional counterpart of Cardy’s formula, which gives the leading high-temperature (β → 0) behavior of supersymmetric partition functions Z SUSY (β). By focusing on superconformal theories, we elaborate on the subleading contributions to their formula when applied to free chiral and U(1) vector multiplets. In particular, we see that the high-temperature expansion of ln Z SUSY (β) terminates at order β 0 . We also demonstrate how their formula must be modified when applied to SU(N) toric quiver gauge theories in the planar (N → ∞) limit. Our method for regularizing the one-loop determinants of chiral and vector multiplets helps to clarify the relation between the 4d N=1 superconformal index and its corresponding supersymmetric partition function obtained by path-integration.

1/N Expansion↗

Geometry and symmetries in lattice spinor gravity

Lattice spinor gravity is a proposal for regularized quantum gravity based on fermionic degrees of freedom. In our lattice model the local Lorentz symmetry is generalized to complex transformation parameters. The difference between space and time is not put in a priori, and the euclidean and the Minkowski quantum field theory are unified in one functional integral. The metric and its signature arise as a result of the dynamics, corresponding to a given ground state or cosmological solution. Geometrical objects as the vierbein, spin connection or the metric are expectation values of collective fields built from an even number of fermions. The quantum effective action for the metric is invariant under general coordinate transformations in the continuum limit. The action of our model is found to be also invariant under gauge transformations. We observe a 'geometrical entanglement' of gauge- and Lorentz-transformations due to geometrical objects transforming non-trivially under both types of symmetry transformations. - Highlights: Black-Right-Pointing-Pointer We formulate the geometrical aspects of a proposal for a lattice regularized model of quantum gravity. Black-Right-Pointing-Pointer The vierbein shows an entanglement between Lorentz symmetry and gauge symmetry. Black-Right-Pointing-Pointer Euclidean and Minkowski signatures of the collective metric and the vierbein are described within the same functional integral.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Sampling frequency thresholds for the quantum advantage of the quantum approximate optimization algorithm

We compare the performance of the Quantum Approximate Optimization Algorithm (QAOA) with state-of-the-art classical solvers Gurobi and MQLib to solve the MaxCut problem on 3-regular graphs. We identify the minimum noiseless sampling frequency and depth p required for a quantum device to outperform classical algorithms. There is potential for quantum advantage on hundreds of qubits and moderate depth with a sampling frequency of 10 kHz. We observe, however, that classical heuristic solvers are capable of producing high-quality approximate solutions in linear time complexity. In order to match this quality for large graph sizes N, a quantum device must support depth p > 11. Additionally, multi-shot QAOA is not efficient on large graphs, indicating that QAOA p ≤ 11 does not scale with N. These results limit achieving quantum advantage for QAOA MaxCut on 3-regular graphs. Other problems, such as different graphs, weighted MaxCut, and 3-SAT, may be better suited for achieving quantum advantage on near-term quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Performance history and upgrades for the DIII-D gyrotron complex

The gyrotron installation on the DIII-D tokamak has been in operation at the second harmonic of the electron cyclotron resonance since the mid-1990s. Prior to that a large installation of ten 60 GHz tubes was operated at the fundamental resonance. The system has been upgraded regularly and is an everyday tool for experiments on DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Total Variation Meets Topological Persistence: A First Encounter

We present first insights into the relation between two popular yet apparently dissimilar approaches to denoising of one dimensional signals, based on (i) total variation (TV) minimization and (ii) ideas from topological persistence. While a close relation between (i) and (ii) might phenomenologically not be unexpected, our work appears to be the first to make this connection precise for one dimensional signals. We provide a link between (i) and (ii) that builds on the equivalence between TV-L{sup 2} regularization and taut strings and leads to a novel and efficient denoising algorithm that is contrast preserving and operates in O(nlogn) time, where n is the size of the input.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Composite electron propagator methods for calculating ionization energies

Accurate ionization energies of molecules may be determined efficiently with composite electron-propagator (CEP) techniques. These methods estimate the results of a calculation with an advanced correlation method and a large basis set by performing a series of more tractable calculations in which large basis sets are used with simpler approximations and small basis sets are paired with more demanding correlation techniques. The performance of several CEP methods, in which diagonal, second-order electron propagator results with large basis sets are combined with higher-order results obtained with smaller basis sets, has been tested for the ionization energies of closed-shell molecules from the G2 set. Useful compromises of accuracy and computational efficiency employ complete-basis-set extrapolation for second-order results and small basis sets in third-order, partial third-order, renormalized partial-third order, or outer valence Green’s function calculations. Analysis of results for vertical as well as adiabatic ionization energies leads to specific recommendations on the best use of regular and composite methods. Results for 22 organic molecules of interest in the design of photovoltaic devices, benzo[a]pyrene, Mg-octaethylporphyrin, and C{sub 60} illustrate the capabilities of CEP methods for calculations on large molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of laser energy deposition for single-shot high aspect-ratio microstructuring of thick BK7 glass

We investigate the generation of high aspect ratio microstructures across 0.7 mm thick glass by means of single shot Bessel beam laser direct writing. We study the effect on the photoinscription of the cone angle, as well as of the energy and duration of the ultrashort laser pulse. The aim of the study is to optimize the parameters for the writing of a regular microstructure due to index modification along the whole sample thickness. By using a spectrally resolved single pulse transmission diagnostics at the output surface of the glass, we correlate the single shot material modification with observations of the absorption in different portions of the retrieved spectra, and with the absence or presence of spectral modulation. Numerical simulations of the evolution of the Bessel pulse intensity and of the energy deposition inside the sample help us interpret the experimental results that suggest to use picosecond pulses for an efficient and more regular energy deposition. Picosecond pulses take advantage of nonlinear plasma absorption and avoid temporal dynamics effects which can compromise the stationarity of the Bessel beam propagation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of the capacity of communication lines with nonlinear finite memory

We propose a method for calculating the capacity of a finite-memory channel up to the square of the nonlinear memory parameter. A comparison with a regular Gaussian model is performed, in which the Kerr nonlinearity is considered as an additional Gaussian noise. The estimate by the regular Gaussian model is shown to yield a greater capacity as compared with the estimate obtained by the nonlinear memory model. The optimal signal powers, providing the maximum mutual information, are found to be equal. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasma rotation and diamagnetic drift effects on the resistive wall modes in the negative triangularity tokamaks

Abstract It was found previously that the negative triangularity (NT) configuration is more MHD-unstable for low n modes than the positive triangularity (PT) case, although the situation is reversed for intermediate n modes and the NT configuration becomes more stable for intermediate n modes ( n = 3 − 10 ) (Zheng et al 2021 Nucl. Fusion 61 116014). Here, n is the toroidal mode number. In this work, we extend the studies to include the rotation effects, as well as the diamagnetic drift effects, to see how the resistive wall modes (RWMs) in the NT configuration are affected as compared with the PT configuration. This is particularly motivated by noting that the wall interface with the plasma is quite different between the NT and PT configurations. It affects the plasma rotation and diamagnetic drift effects on the low n RWM. We consider the DIII-D-NT-experiment equilibrium reconstructed by the EFIT code. Based on the equilibrium g-file, the extended equilibria are constructed with the VMEC code by varying the beta values while keeping the pressure and poloidal current flux profiles basically unchanged. The bootstrap current contribution to the equilibria is taken into account with the Sauter formula. The MHD stability is then computed using the AEGIS code with the rotation and diamagnetic drift effects taken into account. We found that, although the NT configuration is less stable for n = 1 MHD modes, the rotation and diamagnetic drift stabilization effects on RWMs are more effective in the NT configuration than in the PT one. Note that even in the PT case, the stabilization of RWMs by the rotation and kinetic effects is critical. Because the low-n RWMs in the regular NT case are more unstable, the rotation and diamagnetic drift stabilization effects found in this research are important for the NT tokamak concept.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical study of three-body recombination for systems with many bound states

Three-body recombination processes are treated numerically for a system of three identical bosons. The two-body model potentials utilized support many bound states, a major leap in complexity that produces an intricate structure of sharp nonadiabatic avoided crossings in the three-body hyperradial adiabatic potentials at short distances. This model thus displays the usual difficulties of more realistic systems. To overcome the numerical challenges associated with sharp avoided crossings, the slow variable discretization approach is adopted in the region of small hyperradii. At larger hyperradii, where the adiabatic potentials and couplings are smooth, the traditional adiabatic method suffices. Despite the high degree of complexity, recombination into deeply bound states behaves regularly due to the dominance of one decay pathway, resulting from the strong coupling between different recombination channels. Moreover, the usual Wigner threshold law must be modified for excited incident recombination channels.

74 ATOMIC AND MOLECULAR PHYSICS↗

The Cryogenic Dark Matter Search low ionization-threshold experiment

Over 80 years ago we discovered the presence of Dark Matter in our universe. Endeavors in astronomy and cosmology are in consensus with ever improving precision that Dark Matter constitutes an essential 27% of our universe. The Standard Model of Particle Physics does not provide any answers to the Dark Matter problem. It is imperative that we understand Dark Matter and discover its fundamental nature. This is because, alongside other important factors, Dark Matter is responsible for formation of structure in our universe. The very construct in which we sit is defined by its abundance. The Milky Way galaxy, hence life, wouldn't have formed if small over densities of Dark Matter had not caused sufficient accretion of stellar material. Marvelous experiments have been designed based on basic notions to directly and in-directly study Dark Matter, and the Cryogenic Dark Matter Search (CDMS) experiment has been a pioneer and forerunner in the direct detection field. Generations of the CDMS experiment were designed with advanced scientific upgrades to detect Dark Matter particles of mass O(100) GeV/c 2 . This mass-scale was set primarily by predictions from Super Symmetry. Around 2013 the canonical SUSY predictions were losing some ground and several observations (rather hints of signals) from various experiments indicated to the possibility of lighter Dark Matter of mass O(10) GeV/c 2 . While the SuperCDMS experiment was probing the regular parameter space, the CDMSlite experiment was conceived to dedicatedly search for light Dark Matter using a novel technology. "CDMSlite" stands for CDMS - low ionization threshold experiment. Here we utilize a unique electron phonon coupling mechanism to measure ionization generated by scattering of light particles. Typically signals from such low energy recoils would be washed under instrumental noise. In CDMSlite via generation of Luke-Neganov phonons we can detect the small ionization energies, amplified in phonon modes during charge transport. This technology allows us to reach very low thresholds and reliably measure and investigate low energy recoils from light Dark Matter particles. This thesis describes the physics behind CDMSlite, the experimental design and the first science results from CDMSlite operated at the Soudan Underground Laboratory.

79 ASTRONOMY AND ASTROPHYSICS↗

The Features of Structure Formation in Chromium-Nickel Steel Manufactured by a Wire-Feed Electron Beam Additive Process

The investigations of the metal macro- and microstructure are performed using the specimens manufactured from the 302 stainless steel via electron-beam additive layer manufacturing in a laboratory setup ensuring 3D printing of articles with circular interpolation. Successive padding of metal results in the formation of a relief representing alternate crests and troughs on the lateral side of the specimen. It is shown by the methods of optical and scanning electron microscopy that the metal of these specimens has a complex heterogeneous dendritic structure containing both relatively coarse grains and subgrains and finer grains. The fine structure of the resulting metal is characterized by a combination of the regions with marked banding and those with nearly regular-shaped grains both in the longitudinal and transverse directions. The grains of more equiaxed shapes are about 5–10 μm in size. It is hypothesized that an application of the additive process would allow manufacturing textured structures with predetermined orientations.

3D PRINTING↗

Synthesis, Characterization, and Nanomaterials Generated from 6,6'-(((2-Hydroxyethyl)azanediyl)bis(methylene))bis(2,4-di- tert -butylphenol) Modified Group 4 Metal Alkoxides

The impact on the morphology nanoceramic materials generated from group 4 metal alkoxides ([M(OR) 4 ]) and the same precursors modified by 6,6'-(((2- hydroxyethyl)azanediyl)bis(methylene))bis(2,4-di-tert-butylphenol) (referred to as H 3 -AM-DBP 2 (1)) was explored. The products isolated from the 1:1 stoichiometric reaction of a series of [M(OR) 4 ] where M= Ti, Zr, or Hf; OR = OCH(CH 3 ) 2 (OPr i ); OC(CH 3 ) 3 (OBu t ); OCH 2 C(CH 3 ) 3 (ONep) with H 3 -AM-DBP 2 proved, by single crystal X-ray diffraction, to be: [(ONep)Ti(k 4 (O,O’,O’’,N)-AM-DBP 2 )] (2), [(OR)M(μ(O)-k 3 (O’,O’’,N)-AM-DBP 2 )] 2 [M = Zr: OR = OPr i , 3•tol; OBu t , 4•tol; ONep, 5•tol; M = Hf: OR = OBu t , 6•tol; ONep, 7•tol]. The product from each system led to a tetradentate AM-DBP2 ligand and retention of a parent alkoxide ligand. For the monomeric Ti derivative (2), the metal was solved in a trigonal bipyramidal geometry; whereas, for the Zr (3 - 5) and Hf (6, 7) derivatives, a symmetric dinuclear complex was formed where the ethoxide moiety of the AM-DBP2 ligand bridges to the other metal center, generating an octahedral geometry. High quality Density Functional Theory level gas-phase electronic structure calculations on compounds 2 - 7 using Gaussian 09 were used for meaningful Time Dependent Density Functional Theory calculations in the interpretation of the UV-vis absorbance spectral data on 2 - 7. Nanoparticles generated from the solvothermal treatment of the ONep/AMDBP 2 modified compounds (2, 5, 7) in comparison to their parent [M(ONep) 4 ] were larger, and had improved regularity and dispersion of the final ceramic nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the spectral analysis of quantum electrodynamics with spatial cutoffs. I

In this paper, we consider the spectrum of a model in quantum electrodynamics with a spatial cutoff. It is proven that (1) the Hamiltonian is self-adjoint; (2) under the infrared regularity condition, the Hamiltonian has a unique ground state for sufficiently small values of coupling constants. The spectral scattering theory is studied as well and it is shown that asymptotic fields exist and the spectral gap is closed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radon Diffusion Measurement in Polyethylene based on Alpha Detection

We present a method to measure the diffusion of Radon in solid materials based on the alpha decay of the radon daughter products. In contrast to usual diffusion measurements which detect the radon that penetrates a thin barrier, we let the radon diffuse into the material and then measure the alpha decays of the radon daughter products in the material. We applied this method to regular and ultra high molecular weight poly ethylene and find diffusion lengths of order of mm as expected. However, the preliminary analysis shows significant differences between two different approaches we have chosen. These differences may be explained by the different experimental conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Permeability computation on a REV with an immersed finite element method

An efficient method to compute permeability of fibrous media is presented. An immersed domain approach is used to represent the porous material at its microscopic scale and the flow motion is computed with a stabilized mixed finite element method. Therefore the Stokes equation is solved on the whole domain (including solid part) using a penalty method. The accuracy is controlled by refining the mesh around the solid-fluid interface defined by a level set function. Using homogenisation techniques, the permeability of a representative elementary volume (REV) is computed. The computed permeabilities of regular fibre packings are compared to classical analytical relations found in the bibliography.

36 MATERIALS SCIENCE↗