Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particulates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Cleaned 5-Minute Resolution Air Quality and Meteorological Data from Nine TCEQ CAMS Sites in Houston, Texas (Nov 2021 – Oct 2022)

These data encompass 5-minute air monitoring and meteorological observations collected in the greater Houston, Texas metropolitan region, at nine (9) Continuous Ambient Monitoring Stations (CAMS) operated by the Texas Commission on Environmental Quality (TCEQ) between November 1, 2021 and October 31, 2022. The CAMS sites (CAMS 1, 8, 35, 45, 148, 403, 405, 410, and 1052) were chosen because their instrumentation includes measurements of PM2.5. These sites also provide continuous multi-parameter air-quality and meteorological measurements. Particulate matter (PM2.5, PM10) was sampled along with several trace gases, including ozone (O3), nitrogen oxides (NO, NO2, NOx), sulfur dioxide (SO2), and carbon monoxide (CO). The data set also contains standard surface meteorological parameters (temperature, humidity, pressure, wind speed, and wind direction). Several sites also include AutoGC-based measurements of volatile organic compounds (VOCs). Air monitoring instruments deployed at the selected sites comprise the following systems: BAM-1020 or TEOM (PM2.5), Thermo Scientific TEI 49i (O3), TEI 42i (NOx), and AutoGCs (VOCs). This data set is similar to the data included within the houairq5mX1.00 datastream, except for a few additional quality control steps. A systematic data cleaning and verification process was performed on the data set to ensure its quality and preparation for analysis. Removal of non-numeric status flags (e.g., [LIM], [QAS], [SPZ], [CAL], [PMA], [AQI], [SPN], [MAL]) was accomplished by employing rule-based string parsing to extract valid numerical values. Missing entries were set to -9999; however, invalid or anomalous values (e.g., 99999) were retained as originally reported by the TCEQ to preserve data provenance. The time sequence was verified for completeness, removal of duplicates, and uniformity at 5-minute intervals. Column labeling was standardized, and corresponding values were assessed for physical plausibility. All timestamps in the data set were reported in Coordinated Universal Time (UTC) as provided by the TCEQ. Further, the latitude and longitude coordinates were added for each CAMS site. A subset of the data (June 1–September 30, 2022) has been used in the following publication: Subba et al. 2025. “Implications of sea breeze circulations on boundary layer aerosols in the southern coastal Texas region.” EGUsphere 2025: 1–49, https://doi.org/10.5194/egusphere-2025-2659.

latitude↗
DOE OSTI2021

Controlled Conversion of Sodium Metal From Nuclear Systems to Sodium Chloride

A series of three bench-scale experiments was performed to investigate the conversion of sodium metal to sodium chloride via reactions with non-metal and metal chlorides. Specifically, batches of molten sodium metal were separately contacted with ammonium chloride and ferrous chloride to form sodium chloride in both cases along with iron in the latter case. Additional ferrous chloride was added to two of the three batches to form low melting point consolidated mixtures of sodium chloride and ferrous chloride, whereas consolidation of a sodium-chloride product was performed in a separate batch. Samples of the products were characterized via X-ray diffraction to identify attendant compounds. The reaction of sodium metal with metered ammonium chloride particulate feeds proceeded without reaction excursions and produced pure colorless sodium chloride. The reaction of sodium metal with ferrous chloride yielded occasional reaction excursions as evidenced by temperature spikes and fuming ferrous chloride, producing a dark salt-metal mixture. This investigation into a method for controlled conversion of sodium metal to sodium chloride is particularly applicable to sodium containing elevated levels of radioactivity—including bond sodium from nuclear fuels—in remote-handled inert-atmosphere environments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Experimental and theoretical study of the soot-forming tendencies of furans as potential biofuels

Sustainably-produced biofuels, including furans derived from lignocellulosic biomass, are being studied as potential next-generation fuels. Biofuels have unique structures that are absent in conventional fuels and they potentially emit fewer particulates than conventional fuels because of the presence of oxygen atoms. In this work, we focus on quantification and measurement of sooting tendency. A set of furans was selected and their sooting tendencies were characterized by Yield Sooting Index (YSI), which was obtained by measuring the line-of-sight spectral radiance (LSSR) of a coflow laminar diffusion flame doped with 1000 ppm of each test fuel. The measured YSIs are lower than traditional gasoline fuels and benzenoid aromatics (e.g., YSIbenzene = 100). We also performed numerical simulations with a detailed chemical kinetic mechanism to analyze the flame chemistry of 2-methylfuran (2MF). 4→5 H-atom migration in the furan ring causes 31.0% of the total decomposition and is the dominant fuel consumption pathway leading to soot. DFT calculations via the G4 composite method were carried out to obtain activation energies (Ea) and bond dissociation energies (BDE). The results showed that the 4→5 H-atom migration in the furan ring has the second lowest Ea and subsequently forms a 1,2-diene-substituted ketone derivative as a stable species. The ring-opening products of the 4→5 H-atom migration are propyne + a linear ketene for 2-n-alkylfurans, and 1-butyne + a methyl-substituted ketene for 2-t-butylfuran. These results can explain the trends of the measured YSIs of 2-alkylfurans.

09 BIOMASS FUELS↗
DOE OSTI2020

Damaged Fuel in the United States

Over the years of commercial nuclear power plant operations in the United States (U.S.), many fuel assemblies have lost the capability to perform all of their desired functions. These assemblies have lost the capability to be handled, stored, or transported to meet regulations resulting in them being classified as damaged fuel. The causes of these failed assemblies are diverse and plant-specific. The majority of these failed assemblies are contained in a damaged fuel can that will be used in conjunction with a storage and/or transportation system. The storage and transportation systems have a limit on how many slots can be filled with damaged fuel cans. A damaged fuel can is generally a stainless steel container that confines damaged SNF and is closed on its end by screened openings. These screened openings allow gaseous and liquid media to escape but minimize the dispersal of gross particulate material. Out of an abundance of caution a few reactors have loaded high burnup fuel into damaged fuel cans. Damaged fuel is not licensed for storage or transport in the U.S., because the regulations for storage and transport do not specify exactly how to classify damaged fuel. Instead the regulations license/certify packages that specify approved contents. Damaged fuel must be included in the approved contents to be a viable option. In many cases damaged SNF is encapsulated in a damaged fuel can to ensure it can confine gross fuel particles, debris, and or damaged assemblies to a known volume within a loaded cask. This damaged fuel can may then be utilized in the same way as an assembly in a storage and transportation design system. Some storage cask systems utilize top and bottom plugs to confine debris in damaged fuel. The most recent domestic documentation on damaged SNF was performed by the U.S. Energy Information Administration (EIA) and used data from U.S. reactors concluding in June 30th 2013 to produce Form GC-859, “Nuclear Fuel Data Survey”. Based on this form there were 136,821 boiling water reactor (BWR) spent nuclear fuel (SNF) assemblies and 104,647 pressurized water reactor (PWR) SNF assemblies for a total of 241,468 SNF assemblies in the U.S. Out of these 241,468 SNF assemblies, 4,521 assemblies were classified as failed. Some assemblies were also disassembled and the fuel rods or pieces of fuel rods were combined together to make a consolidated assembly. A consolidated assembly may include damaged fuel, or it could have been consolidated as part of a demonstration project. The GC-859 data includes 2,550 consolidated assemblies containing between 0 and 264 whole fuel rods. These consolidated assemblies could be placed in single assembly canisters and stored in the spent fuel pool. For dry storage and transportation, a single assembly canister is generally placed in a damaged fuel can. In addition to the consolidated assemblies, 2,391 uncanistered fuel rod pieces exist, which were removed from 494 assemblies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Hollow fiber mid-ID spectrometer with UV laser ablation sampling for fine spatial reoslution of isotope ratios in solids

We describe a system that combines isotope ratio analysis via mid-infrared (Mid-IR) laser absorption spectroscopy with fine spatial resolution sampling using a UV pulsed laser. The UV laser ablates a pit in a solid on the order of 10 microns in diameter. The sample-derived particulates resulting from laser ablation pass through a micro-combustor, and the resulting gas is analyzed using Mid-IR laser absorption spectroscopy in a capillary absorption spectrometer (CAS). The CAS uses a hollow fiber optic waveguide with a reflective inner coating and a small internal volume on the order of 1ml. The hollow fiber both guides the laser light from source to detector and contains the gas sample at reduced pressure. Near unity overlap between the laser beam and sample enables sensitive analysis with ultra-small sample size. A prototype system has been demonstrated to enable stable carbon isotopic analysis (d13C) with 1 per mil precision using <1 picomole of carbon and is currently being used to study nutrient exchange in soil/root/microbial rhizosphere studies. The smaller sample size of this system is enabling fine spatial resolution analysis (on the order of 10 microns), which is roughly an order of magnitude smaller than was possible with an isotope ratio mass spectrometer (IRMS). In addition to rhizosphere studies, the system can provide a useful tool for fine scale isotope analysis with applications in biological, forensic, and environmental science.

capillary absorption spectroscopy, laser ablation,↗
DOE OSTI2020

Apparatus and method for visualization of particles suspended in a fluid and fluid flow patterns using ultrasound

An apparatus and method for real-time visualization of particulate matter suspended in a static or flowing fluid and fluid flow patterns in a pipe, tube, conduit, or other container, are described. Ultrasonic scanning and detection of scattered sound from the particles in the fluid create a real-time image of the particles, or of flow patterns in the liquid. A mechanical wobbler directs a piezoelectric transducer over a chosen angle in an oscillatory manner. The transducer is operated in a pulse-echo mode wherein the same transducer detects the return signal from the target region through which particles are passing and/or a flow is present. The pulse-echo measurements are made rapidly and continuously during a single sweep of the transducer over the chosen angle. Received signals are processed in the ultrasound scanner electronics module and displayed as an image in real-time.

42 ENGINEERING↗
DOE OSTI2020

Improvement of SCALE-XSPROC Multigroup Cross Section Processing Based on the CENTRM Pointwise Slowing Down Calculation

The SCALE-XSProc multigroup (MG) cross section processing procedure based on the CENTRM pointwise slowing down calculation is the primary procedure to process problem-dependent self-shielded MG cross sections and scattering matrices for neutron transport calculations.This procedure supports various cell-based geometries including slab, 1-D cylindrical, 1-D spherical and 2-D rectangular configurations and doubly heterogeneous particulate fuels. Recently, this procedure has been significantly improved to be applied to any advanced reactor analysis covering thermal and fast reactor systems, and to be comparable to continuous energy (CE) Monte Carlo calculations. Some reactivity bias and reaction rate differences have been observed compared with CE Monte Carlo calculations, and several areas for improvement have been identified in the SCALE-XSProc MG cross section processing: (1) resonance self-shielding calculations within the unresolved resonance range, (2) 10 eV thermal cut-off energy for the free gas model, (3) on-the-fly adjustments to the thermal scattering matrix, (4) normalization of the pointwise neutron flux, and (5) fine MG energy structure. This procedure ensures very accurate MG cross section processing for high-fidelity deterministic reactor physics analysis for various advanced reactor systems.

Kim, Kang Seog↗
DOE OSTI2020

Environmental impact of national and subnational carbon policies in China based on a multi-regional dynamic CGE model

Carbon policies are important not only for mitigating global climate change, but also for controlling local and regional air pollution. The large regional disparities in economic development and air pollution across China calls for regionally differentiated policies. Previous studies have not systematically investigated the environmental impacts of regional carbon policies in China covering different spatial scales. This study constructs a multi-regional dynamic computable general quilibrium (CGE) model covering 30 provinces of China to assess the impacts of national and subnational carbon polices on CO2 emissions and co-emitted air pollutants from 2020 to 2050. We consider one national carbon policy which aims to achieve China’s 2030 national CO2 abatement target, as well as three regional policies with the same policy stringency as the national one but only applied to eastern China (EP), the Jiangsu-Shanghai-Zhejiang area (JSZP), and the Beijing-Tianjin-Hebei area (BTHP), respectively. We find that regional policies (EP, JSZP, and BTHP) are as effective in reducing CO2 emissions in their targeted regions as the national policy. However, they lead to an increase in CO2 emissions in untargeted regions (the so-called “emissions leakage”). The CO2 leakage rates, which depend on the policy spatial coverage, are 4%, 13%, and 65% for EP, JSZP, and BTHP, respectively, in 2050. Compared with CO2, changes in air pollutant emissions, including sulfur dioxide (SO2), nitrogen oxides (NOx), volatile organic compounds (VOC), and fine particulate matter (PM2.5), exhibit a similar pattern under all policy scenarios, but the magnitude of change is significantly smaller. Transportation, thermal power, and some energy intensive industries are the three largest contributors to CO2 and air pollutant emission reductions. Our results suggest that regional carbon policy is effective in reducing CO2 and air pollutant emissions in the targeted regions, and extending the spatial coverage or increasing policy stringency can largely inhibit emissions leakage.

Zhang, Wenwen↗
DOE OSTI2020

Diagnostic methods for a high efficiency exhaust aftertreatment system

A method includes interpreting NOx data indicative of an amount of NOx exiting an engine and an amount of NOx exiting an exhaust aftertreatment system coupled to the engine, determining a NOx conversion efficiency fault is present based on the amount of NOx exiting the engine and the amount of NOx exiting the exhaust aftertreatment system, and determining at least one of a selective catalytic reduction (SCR) catalyst of the exhaust aftertreatment system and a diesel particulate filter having a coating of a SCR reaction catalyst (DPF-SCR) of the exhaust aftertreatment system are responsible for the NOx conversion efficiency fault based on at least one of a reductant slip amount and a NOx conversion value across at least one of the SCR catalyst and the DPF-SCR.

42 ENGINEERING↗
DOE OSTI2020

Conversion of lignin into a water-soluble polyacid using a MOF catalyst

A process for valorization of lignin includes the steps of mixing lignin; a MOF catalyst metalated with a metal atom selected from the group consisting of Fe, Mn, Co, Cu, or Ni, and combinations thereof; an oxidizing agent; and an aqueous solvent. The product of this process, a charged polyacid-containing species derived from lignin, may be included in a dispersion with a dispersible particulate material, and an aqueous dispersing medium.

09 BIOMASS FUELS↗
DOE OSTI2021

Apparatus and method for three-dimensional metal printing

An apparatus and device for building an article by additive manufacturing or 3-D printing. The method includes feeding a supply of particulate slurry to and through a nozzle, such as including an integrated pump, to form a plurality of beads and layers of the slurry on a deposition surface, and ultimately forming a desirable article from the layers of deposited material. The liquid phase of the slurry is desirably removed by heat, and the deposited layers can be sintered or otherwise fused as needed.

Klett, James W.↗
DOE OSTI2021

Aqueous manganese ion battery

An alternative grid energy storage system is described herein. In one embodiment, an electrochemical cell comprises a high specific surface area cathode (e.g., a cathode comprising a carbon nanofoam paper, a carbon nanotube mesh, a particulate carbon material, electrolytic manganese dioxide, or a manganese dioxide film), a zinc or lead anode (e.g., Zn or Pb foil), a selective ion-conductive separator that does not conduct zinc ions (e.g., a NAFION sulfonated tetrafluoroethylene based fluoropolymer-copolymer separator) between the anode and the cathode, and an aqueous electrolyte comprising a manganese salt (e.g., aqueous manganese sulfate) contacting the electrodes and the separator. A battery comprising two or more of the electrochemical cells electrically connected together in series, parallel, or both, also is described.

Tepavcevic, Sanja↗
DOE OSTI2021

Aspects of Crystal Growth and Atomic-Scale Characterization of U/Th Age-Dating Particles

Trace analysis of particulate material collected on environmental swipe samples continues to be one of the cornerstones of the IAEA’s process of verifying member state compliance as part of the Non-Proliferation Treaty (NPT). While complementary to traditional bulk analysis, the ability to measure individual particles can be far more impactful from a radiochronometry perspective. The 234U/230Th radiochronometer is being evaluated as a means of establishing model ages for discrete particles with sufficient confidence. To support the extension of current capabilities, reference materials with a suitable particle form factor and well-documented purification date are actively sought for development with large geometry secondary ion mass spectroscopy.

Nuclear Safeguards, IAEA, Particle Standards↗
DOE OSTI2022

INVESTIGATION OF TURBULENT JETS, SPRAYS, AND SUPERCRITICAL MIXING BY TIME RESOLVED RAINBOW SCHLIEREN DEFLECTOMETRY

As technological advancements have enabled higher efficiency compression ignition (CI) engines (diesel engines) by operating at higher pressures and temperatures, the mechanisms of fuel-air mixing are postulated to change. Thus, there is a greater need for experimental data to develop and verify new phenomena. However, the fast time scales and harsh environments associated with CI engines present many experimental difficulties and requires high quality non-intrusive diagnostics to obtain useful data. The diagnostics itself must be validated prior to its implementation in an engine environment. The purpose of this research is to advance rainbow schlieren deflectometry (RSD) to study turbulent fuel sprays including the effects of supercritical mixing in CI engine environments. This objective is met by developing and applying quantitative RSD, for the first time, to three separate aspects of fuel sprays: 1) turbulent mixing, 2) phase boundaries, and 3) non-ideal gas mixing. First, quantitative RSD is demonstrated for turbulent mixing in a canonical helium jet. Rayleigh scattering data in the literature is used to validate the concentration measurements obtained by RSD. The results also provide explanations for phenomena occurring in the helium jet and provide data not yet present in the literature. Second, RSD is applied to high pressure multi-phase fuel sprays and new methodologies are developed to distinguish the liquid region from the vapor region and to quantify the in-between region on a probabilistic basis. Isolating liquid and vapor regions generally requires two separate diagnostics, e.g., Mie scattering (liquid region) and Rayleigh scattering (vapor region). However, the results of this study demonstrate that RSD can be used as a single diagnostic to measure both liquid and vapor boundaries. Third, the optical-to-thermodynamic relations associated with refrac-tometry are investigated under non-ideal gas mixing conditions to develop a generalized relationship valid for both ideal or non-ideal gas mixing. The last part of this research develops the theoretical tools to understand and experimentally realize supercritical mixing at diesel conditions. Guided by the theoretical analysis, RSD is applied to compare supercritical versus transcritical mixing at CI conditions using a constant pressure test rig. It is found that while fully supercritical mixing ers benefits in diesel engines, i.e, faster mixing times (50% higher velocities), the absence of droplets which cause high levels of particulate emissions, etc., it would be difficult to achieve in practice because of the requirements of fuels with low critical temperature and/or substantial fuel preheating.

02 PETROLEUM↗
DOE OSTI2022

A Subcritical Assembly for Training and Education Use at the Oak Ridge National Laboratory

A near-final design has been completed for a new subcritical assembly at Oak Ridge National Laboratory (ORNL). This subcritical assembly will support the Nuclear Criticality Safety Program (NCSP) training and education program to augment current subcritical assembly capabilities at Sandia National Laboratories (SNL) and at the National Criticality Experiments Research Center (NCERC). Other collaborations have been proposed with the Sunrise Consortium and others. This proposed subcritical assembly uses legacy AGN-201M research reactor fuel plates that are available from the Y-12 National Security Complex. This subcritical assembly contains approximately 620 grams of 235 U as UO 2 particulates distributed homogeneously in radiation-stabilized polyethylene. The fuel plates will have a graphite neutron reflector to obtain a core multiplication, M, from 10 to 50, corresponding to a k eff of 0.9 to 0.95, respectively. The subcritical assembly will be able to support at least four experiments for the training courses: (1) the addition of fissile material to increase neutron multiplication (mass), (2) a core separation experiment (interaction), (3) the effect of adding moderators to the core (moderation), and (4) the effect of adding neutron absorbers to the core (poison/absorption). The proposed ORNL subcritical assembly will provide additional student bandwidth to support NCSP training courses and to provide for some backup capacity if nuclear facility operations are disrupted at SNL or NCERC due to some unforeseen issue. The subcritical assembly will be designed to be an inherently safe subcritical assembly—subcritical under all normal and abnormal conditions—and it will provide the capability to conduct hands-on training to support NCSP and general nuclear criticality safety (NCS) staff training and qualification goals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

A Subcritical Assembly for Training and Education Use at the Oak Ridge National Laboratory [Abstract]

A near-final design has been completed for a new subcritical assembly at Oak Ridge National Laboratory (ORNL). This subcritical assembly will support the Nuclear Criticality Safety Program (NCSP) training and education program to augment current subcritical assembly capabilities at Sandia National Laboratories (SNL) and at the National Criticality Experiments Research Center (NCERC). Other collaborations have been proposed with the Sunrise Consortium and others. This proposed subcritical assembly uses legacy AGN-201M research reactor fuel plates that are available from the Y-12 National Security Complex. This subcritical assembly contains approximately 620 grams of 235 U as UO 2 particulates distributed homogeneously in radiation-stabilized polyethylene. The fuel plates will have a graphite neutron reflector to obtain a core multiplication, M, from 10 to 50, corresponding to a k eff of 0.9 to 0.95, respectively. The subcritical assembly will be able to support at least four experiments for the training courses: (1) the addition of fissile material to increase neutron multiplication (mass), (2) a core separation experiment (interaction), (3) the effect of adding moderators to the core (moderation), and (4) the effect of adding neutron absorbers to the core (poison/absorption). The proposed ORNL subcritical assembly will provide additional student bandwidth to support NCSP training courses and to provide for some backup capacity if nuclear facility operations are disrupted at SNL or NCERC due to some unforeseen issue. The subcritical assembly will be designed to be an inherently safe subcritical assembly—subcritical under all normal and abnormal conditions—and it will provide the capability to conduct hands-on training to support NCSP and general nuclear criticality safety (NCS) staff training and qualification goals.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Modular system and method for mercury speciation in a fluid sample

Modular Hg analysis devices and methods are described for use in mercury speciation protocols. Modules can be selected and removably connected to one another to specifically target mercury species in a sample so as to accurately determine the presence or quantity of different mercury species in a fluid sample. Modules can include reductants for reducing inorganic mercury to form elemental mercury and amalgamation agents to capture the elemental mercury. Modules can include filters for capture of particulates as well as capture agents, e.g., solid phase extraction agents, for capture of organic mercury species.

Looney, Brian B.↗