Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Packets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Review of internal cyber attacks in nuclear facilities and an artificial neural network model for implementing internal cyberforensics

Deployment of digital technologies within a modern shift in cyber defense systems is essential for protecting the energy production units. One of the important components of defense is cyberforensics: once an attack has been detected to locate its origin. In this paper, a review of well-known cyberattacks in nuclear facilities is provided, with the lessons learned leading to the development of a machine learning approach implementing identification of internal at- tacks in the facility's data networks. Our approach may be seen as one of the layers in a defense-in-depth strategy that identifies if the attack comes from inside, which may result in identifying faster the attacker's origin. The presented model exploits network packet examination to cast accurate predictions on detailing the origin of malicious network connections. The approach fuses multiple mathematical functions within an artificial neural network to provide a response in the form of 0/1, i. e., whether the attack is identified as internal or not. The utilization of a variety of test cases is developed to explore the relevance and validity of the predictive approach. The proposed implementation is examined with network data packet variance, and the results obtained exhibit a highly accurate detection rate.

Nuclear Science & Technology↗

United States Utility-Scale PV Supply Curves 2023

This data packet contains supply curves, hourly generation profiles, and a composite siting exclusion TIFF for utility-scale PV across the contiguous United States. The supply curves offer comprehensive metrics such as capacity (MW), generation (MWh), levelized cost of energy (LCOE), levelized cost of transmission (LCOT), and more for each reV site (~60,000 sites). Hourly generation profiles are available for each reV site and can be matched to the available capacity in the supply curve (refer to the Jupyter Notebook). The composite exclusion TIFF is a single file that delineates areas where PV installations are permissible based on various siting assumptions. This data packet contains information for the Reference and Limited siting scenarios. For further details and citation, please refer to the publication linked below: Lopez, Anthony, Pavlo Pinchuk, Michael Gleason, Wesley Cole, Trieu Mai, Travis Williams, Owen Roberts, Marie Rivers, Mike Bannister, Sophie-Min Thomson, Gabe Zuckerman, and Brian Sergi. 2024. Solar Photovoltaics and Land-Based Wind Technical Potential and Supply Curves for the Contiguous United States: 2023 Edition. Golden, CO: National Renewable Energy Laboratory. NREL/TP-6A20-87843.

2023↗

United States Land-based Wind Supply Curves 2023

This data packet contains supply curves, hourly generation profiles, and a composite siting exclusion TIFF for land-based wind across the contiguous United States. The supply curves offer comprehensive metrics such as capacity (MW), generation (MWh), levelized cost of energy (LCOE), levelized cost of transmission (LCOT), and more for each reV site (~60,000 sites). Hourly generation profiles are available for each reV site and can be matched to the available capacity in the supply curve (refer to the Jupyter Notebook). The composite exclusion TIFF is a single file that delineates areas where wind installations are permissible based on various siting assumptions. This data packet contains information for the Reference and Limited siting scenarios. The turbine parameters used were a hub-height of 115 meters and a rotor diameter of 170 meters, as obtained from the Annual Technology Baseline (ATB) 2022. For further details and citation, please refer to the publication linked below: Lopez, Anthony, Pavlo Pinchuk, Michael Gleason, Wesley Cole, Trieu Mai, Travis Williams, Owen Roberts, Marie Rivers, Mike Bannister, Sophie-Min Thomson, Gabe Zuckerman, and Brian Sergi. 2024. Solar Photovoltaics and Land-Based Wind Technical Potential and Supply Curves for the Contiguous United States: 2023 Edition. Golden, CO: National Renewable Energy Laboratory. NREL/TP-6A20-87843.

2023↗

Toward Wireless Smart Grid Communications: An Evaluation of Protocol Latencies in an Open-Source 5G Testbed

Fifth-generation networks promise wide availability of wireless communication with inherent security features. The 5G standards also outline access for different applications requiring low latency, machine-to-machine communication, or mobile broadband. These networks can be advantageous to numerous applications that require widespread and diverse communications. One such application is found in smart grids. Smart grid networks, and Operational Technology (OT) networks in general, utilize a variety of communication protocols for low-latency control, data monitoring, and reporting at every level. Transitioning these network communications from wired Wide Area Networks (WANs) to wireless communication through 5G can provide additional benefits to their security and network configurability. However, introducing these wireless capabilities may also result in a degradation of network latency. In this paper, we propose utilizing 5G for smart grid communications, and we evaluate the latency impacts of encapsulating GOOSE, Modbus, and DNP3 for transmission over a 5G network. The OpenAirInterface open-source library is utilized to deploy an in-lab 5G Core Network and gNB for testing with off-the-shelf User Equipment (UE). This creates an effective 5G test platform for experimenting with different OT protocols such as GOOSE. The results are validated by measuring two different Intelligent Electronic Devices’ contact closure times for each network configuration. These tests are also conducted for varying packet sizes in order to isolate different sources of network latency. Our study outlines the latency impact of communication over 5G for time-critical and non-critical applications regarding their transition toward private 5G-based OT network implementations. The conducted experiments illustrate that in the case of GOOSE packets, simple encapsulation may exceed the protocol’s time-critical nature, and, therefore, additional measures must be taken to ensure a viable transition of GOOSE to 5G services. However, non-critical applications are shown to be viable for migration to 5G.

42 ENGINEERING↗

Low Latency and High Data Rate (LLHD) Scheduler: A Multipath TCP Scheduler for Dynamic and Heterogeneous Networks

The scheduler is a crucial component of the multipath transmission control protocol (MPTCP) that dictates the path that a data packet takes. Schedulers are in charge of delivering data packets in the right order to prevent delays caused by head-of-line blocking. The modern Internet is a complicated network whose characteristics change in real-time. MPTCP schedulers are supposed to understand the real-time properties of the underlying network, such as latency, path loss, and capacity, in order to make appropriate scheduling decisions. However, the present scheduler does not take into account all of these characteristics together, resulting in lower performance. We present the low latency and high data rate (LLHD) scheduler, which successfully makes scheduling decisions based on real-time information on latency, path loss, and capacity, and achieves around 25% higher throughput and 45% lower data transmission delay than Linux’s default MPTCP scheduler.

97 MATHEMATICS AND COMPUTING↗

An Integral-based Technique to Accelerate the Monte Carlo Radiative Transfer Computation for Supernovae

We present an integral-based technique (IBT) algorithm to accelerate supernova (SN) radiative transfer calculations. The algorithm utilizes “integral packets,” which are calculated by the path integral of the Monte Carlo (MC) energy packets, to synthesize the observed spectropolarimetric signal at a given viewing direction in a 3D time-dependent radiative transfer program. Compared to the event-based technique (EBT) proposed by M. Bulla et al., our algorithm significantly reduces the computation time and increases the MC signal-to-noise ratio (S/N). Using a 1D spherical symmetric Type Ia SN ejecta model DDC10 and its derived 3D model, the IBT algorithm has successfully passed the verification of spherical symmetry and cross comparison on a 3D SN model with the direct-counting technique and EBT. Notably, with our algorithm implemented in the 3D MC radiative transfer code SEDONA, the computation time is faster than EBT by a factor of 10−30, and the S/N is better by a factor of 1.5−3, with the same number of MC quanta.

79 ASTRONOMY AND ASTROPHYSICS↗

DMTN-165: A Hybrid Notification and Alert Retrieval Service

We consider the implications of providing a subset of alert packet contents in the alert stream, with the full alert packets available for rate-limited retrieval using an identifier included in the "lightweight" alert. This hybrid approach would enable much wider dissemination of the complete lightweight alert stream, potentially to thousands more users than is possible in the current baseline. In turn this "alerts on your laptop" access would allow users to conduct more sophisticated filtering and analysis than the current Alert Filtering Service, increasing the overall scientific returns of the alert stream. Community brokers would still be able to retrieve all of the contents of the full alert stream within the 60 second latency window and would gain greater control over their ingestion of the bulk alert data. Technically, this hybrid system may represent a modest increase in complexity over the current baseline but is likely to be more operationally robust.

79 ASTRONOMY AND ASTROPHYSICS↗

Direct observations of low-energy solar electrons associated with a type 3 solar radio burst

On 6 April 1971 a solar X-ray flare and a type 3 solar radio noise burst were observed with instrumentation on the eccentric-orbiting satellite IMP 6. The type 3 solar radio noise burst was detected down to a frequency of 31 kHz. A highly anisotropic packet of low-energy solar electron intensities arrived at the satellite approximately 6000 seconds after the onset of the solar flare. This packet of solar electron intensities was observed for 4200 seconds. Maximum differential intensities of the solar electrons were in the energy range of one to several keV. The frequency drift rate of the type 3 radio noise at frequencies below 178 kHz also indicated an average particle speed corresponding to that of a 3-keV electron. The simultaneous observations of these solar electron intensities and of the type 3 solar radio burst are presented, and their interrelationships are explored.

Frank, L. A.↗

Buffer control unit for computer communications

Unit provides character echoing for keyboard display, parity and syndrome generation (error detection), half or full data-packet generation, automatic retransmission of packets, and keyboard lock-up.

Okinaka, A. K.↗

Research in the Aloha system

The Aloha system was studied and developed and extended to advanced forms of computer communications networks. Theoretical and simulation studies of Aloha type radio channels for use in packet switched communications networks were performed. Improved versions of the Aloha communications techniques and their extensions were tested experimentally. A packet radio repeater suitable for use with the Aloha system operational network was developed. General studies of the organization of multiprocessor systems centered on the development of the BCC 500 computer were concluded.

Abramson, N.↗

Sensor data autonomy

'Smart' sensors onboard NASA space missions will require variable data output bandwidth as they respond to phenomena of interest. An Instrument Telemetry Packet (ITP) approach has been developed which encodes experimental instrument data into an autonomous data package, along with pertinent engineering parameters and ancillary data (time, position, attitude, etc.). New requirements for onboard concentration and buffering, as well as for end-to-end error control, arise from this approach. Emphasis is placed on packet protocols compatible with the data link standard ADCCP, to enable one set of ground support equipment to readily support instrument development, launch site checkout and mission operations phases.

Greene, E. P.↗

Impact of advanced onboard processing concepts on end-to-end data system

An investigation is conducted of the impact of advanced onboard data handling concepts on the total system in general and on ground processing operations, such as those being performed in the central data processing facility of the NASA Goddard Space Flight Center. In one of these concepts, known as the instrument telemetry packet (ITP) system, telemetry data from a single instrument is encoded into a packet, along with other ancillary data, and transmitted in this form to the ground. Another concept deals with onboard temporal registration of image data from such sensors as the thematic mapper, to be carried onboard the Landsat-D spacecraft in 1981. It is found that the implementation of the considered concepts will result in substantial simplification of the ground processing element of the system. With the projected tenfold increase in the data volume expected in the next decade, the introduction of ITP should keep the cost of the ground data processing function within reasonable bounds and significantly contribute to a more timely delivery of data/information to the end user.

Sos, J. Y.↗

A concept for a transparent data acquisition and distribution system for spaceflight applications

The paper describes the Modular Data System concept of the NASA End-to-End Data System program. Data from a single instrument along with the necessary ancillary data will be assembled into self-contained packets and subsequently transmitted over various communications links (space telemetry channel, ground communications circuits, etc.) to the experimenter's facility in real time; reliable error control coding will be included in each link transmission to protect the integrity of the data packets. A major objective is to make the entire data acquisition and distribution process transparent to the experimenter in the sense that the output terminal of the distribution system will be physically, logically and electrically identical to that of the experiment output channel.

Greene, E. P.↗

Second year technical report on-board processing for future satellite communications systems

Advanced baseband and microwave switching techniques for large domestic communications satellites operating in the 30/20 GHz frequency bands are discussed. The nominal baseband processor throughput is one million packets per second (1.6 Gb/s) from one thousand T1 carrier rate customer premises terminals. A frequency reuse factor of sixteen is assumed by using 16 spot antenna beams with the same 100 MHz bandwidth per beam and a modulation with a one b/s per Hz bandwidth efficiency. Eight of the beams are fixed on major metropolitan areas and eight are scanning beams which periodically cover the remainder of the U.S. under dynamic control. User signals are regenerated (demodulated/remodulated) and message packages are reformatted on board. Frequency division multiple access and time division multiplex are employed on the uplinks and downlinks, respectively, for terminals within the coverage area and dwell interval of a scanning beam. Link establishment and packet routing protocols are defined. Also described is a detailed design of a separate 100 x 100 microwave switch capable of handling nonregenerated signals occupying the remaining 2.4 GHz bandwidth with 60 dB of isolation, at an estimated weight and power consumption of approximately 400 kg and 100 W, respectively.

Brandon, W. T.↗

Upstream hydromagnetic waves and their association with backstreaming ion populations - ISEE 1 and 2 observations

Measurements from the Lepedea plasma instruments and the flux gate magnetometers on ISEE 1 and 2 are used to examine the nature of the hydromagnetic waves associated with the various classes of ions backstreaming from the earth's bow shock. The reflected ions, which are confined to a narrow energy and angular range, are accompanied by small amplitude (less than approximately 1/2 gamma peak to peak) left-handed waves at frequencies close to 1 Hz in the spacecraft frame. Diffuse backstreaming particles with a broad energy spectrum are associated with low frequency (approximately 30-s period), large amplitude (approximately 5 gamma peak to peak) waves. Intermediate particles are associated with a mixture of these two wave types. Often the waves associated with the diffuse beams steepen as if they were minishocks. The leading edge (trailing edge in the spacecraft frame) frequently appears to break up into a whistler mode wave packet. These discrete wave packets are right-hand polarized and have frequencies from below the proton gyrofrequency to well above it in the plasma frame and are blown back towards the earth by the solar wind.

Hoppe, M. M.↗

A numerical method for integrating the kinetic equations of droplet spectra evolution by condensation/evaporation and by coalescence/breakup processes

An extension of the method of moments is developed for the numerical integration of the kinetic equations of droplet spectra evolution by condensation/evaporation and by coalescence/breakup processes. The number density function n sub k (x,t) in each separate droplet packet between droplet mass grid points (x sub k, x sub k+1) is represented by an expansion in orthogonal polynomials with a given weighting function. In this way droplet number concentrations, liquid water contents and other moments in each droplet packet are conserved and the problem of solving the kinetic equations is replaced by one of solving a set of coupled differential equations for the number density function moments. The method is tested against analytic solutions of the corresponding kinetic equations. Numerical results are obtained for different coalescence/breakup and condensation/evaporation kernels and for different initial droplet spectra. Also droplet mass grid intervals, weighting functions, and time steps are varied.

Emukashvily, I. M.↗

A modified adaptive delta modulator

This paper presents the results of a study in data compression of adaptive delta modulated video signals. The Song mode ADM is first investigated at a sampling rate of 16 Mbits/s and shown not to produce enough redundancy to warrant entropy encoding. A modified adaptive delta modulator algorithm is presented that operates at a sampling rate of 16 Mbits/s and does produce sufficient redundancy to yield a 40-50 percent data compression by using a simple code on 4 bit data blocks. Other techniques such as field interpolation and direct substitution are shown to increase the possible data compression further without noticeable degradation in the two input images used in this investigation. The effects of channel errors in the transmission of packet video over a computer network are considered. A leaky integrator is used to reduce the effects of channel errors in the data bits. It is shown that the effects of channel errors can be reduced by field interpolating those packets that can be shown to contain errors.

Barba, J.↗

Application of Monte Carlo techniques to transient thermal modeling of cavity radiometers having diffuse-specular surfaces

A viable alternative to the net exchange method of radiative analysis which is equally applicable to diffuse and diffuse-specular enclosures is presented. It is particularly more advantageous to use than the net exchange method in the case of a transient thermal analysis involving conduction and storage of energy as well as radiative exchange. A new quantity, called the distribution factor is defined which replaces the angle factor and the configuration factor. Once obtained, the array of distribution factors for an ensemble of surface elements which define an enclosure permits the instantaneous net radiative heat fluxes to all of the surfaces to be computed directly in terms of the known surface temperatures at that instant. The formulation of the thermal model is described, as is the determination of distribution factors by application of a Monte Carlo analysis. The results show that when fewer than 10,000 packets are emitted, an unsatisfactory approximation for the distribution factors is obtained, but that 10,000 packets is sufficient.

Mahan, J. R.↗