Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROCESSORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Seismic waveform viewer, processor and calculator

SWIFT is a computer code that is designed to do research level signal analysis on seismic waveforms, including visualization, filtering and measurement. LLNL is using this code, amplitude and global tomography efforts.

Matzel, E.↗

Sensor Authentication: Embedded Processor Code

Described is the c code running on the embedded Microchip 32bit PIC32MX575F256H located on the INL developed noise analysis circuit board. The code performs the following functions: -Controls the noise analysis circuit board preamplifier voltage gains of 1, 10, 100, 000 -Initializes the analog to digital conversion hardware, input channel selection, Fast Fourier Transform (FFT) function, USB communications interface, and internal memory allocations -Initiates high resolution 4096 point 200 kHz data acquisition -Computes complex 2048 point FFT and FFT magnitude. -Services Host command set -Transfers raw data to Host -Transfers FFT result to host -Communication error checking

Svoboda, John↗

An efficient MPI/OpenMP parallelization of the Hartree–Fock–Roothaan method for the first generation of Intel® Xeon Phi™ processor architecture

The Hartree-Fock (HF) method in the quantum chemistry package GAMESS represents one of the most irregular algorithms in computation today. Major steps in the calculation are the irregular computation of electron repulsion integrals (ERIs) and the building of the Fock matrix. These are the central components of the main Self Consistent Field (SCF) loop, the key hotspot in Electronic Structure (ES) codes. By threading the MPI ranks in the official release of the GAMESS code, we not only speed up the main SCF loop (4x to 6x for large systems), but also achieve a significant (>2x) reduction in the overall memory footprint. These improvements are a direct consequence of memory access optimizations within the MPI ranks. We benchmark our implementation against the official release of the GAMESS code on the Intel R Xeon PhiTM supercomputer. Here, scaling numbers are reported on up to 7,680 cores on Intel Xeon Phi coprocessors.

97 MATHEMATICS AND COMPUTING↗

Recovery Act: Integrated DC-DC Conversion for Energy-Efficient Multicore Processors

In this project, we have developed the use of thin-film magnetic materials to improve in energy efficiency of digital computing applications by enabling integrated dc-dc power conversion and management with on-chip power inductors. Integrated voltage regulators also enables fine-grained power management, by providing dynamic scaling of the supply voltage in concert with the clock frequency of synchronous logic to throttle power consumption at periods of low computational demand. The voltage converter generates lower output voltages during periods of low computational performance requirements and higher output voltages during periods of high computational performance requirements. Implementation of integrated power conversion requires high-capacity energy storage devices, which are generally not available in traditional semiconductor processes. We achieve this with integration of thin-film magnetic materials into a conventional complementary metal-oxide-semiconductor (CMOS) process for high-quality on-chip power inductors.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

High performance graphics processor based computed tomography reconstruction algorithms for nuclear and other large scale applications.

The goal of this work is to develop a fast computed tomography (CT) reconstruction algorithm based on graphics processing units (GPU) that achieves significant improvement over traditional central processing unit (CPU) based implementations. The main challenge in developing a CT algorithm that is capable of handling very large datasets is parallelizing the algorithm in such a way that data transfer does not hinder performance of the reconstruction algorithm. General Purpose Graphics Processing (GPGPU) is a new technology that the Science and Technology (S&T) community is starting to adopt in many fields where CPU-based computing is the norm. GPGPU programming requires a new approach to algorithm development that utilizes massively multi-threaded environments. Multi-threaded algorithms in general are difficult to optimize since performance bottlenecks occur that are non-existent in single-threaded algorithms such as memory latencies. If an efficient GPU-based CT reconstruction algorithm can be developed; computational times could be improved by a factor of 20. Additionally, cost benefits will be realized as commodity graphics hardware could potentially replace expensive supercomputers and high-end workstations. This project will take advantage of the CUDA programming environment and attempt to parallelize the task in such a way that multiple slices of the reconstruction volume are computed simultaneously. This work will also take advantage of the GPU memory by utilizing asynchronous memory transfers, GPU texture memory, and (when possible) pinned host memory so that the memory transfer bottleneck inherent to GPGPU is amortized. Additionally, this work will take advantage of GPU-specific hardware (i.e. fast texture memory, pixel-pipelines, hardware interpolators, and varying memory hierarchy) that will allow for additional performance improvements.

97 MATHEMATICS AND COMPUTING↗

A Four Channel Beam Current Monitor Data Acquisition System Using Embedded Processors

Data acquisition from multiple beam current monitors is required for electron accelerator production of Mo-99. A two channel system capable of recording data from two beam current monitors has been developed, is currently in use, and is discussed below. The development of a cost-effective method of extending this system to more than two channels and integrating of these measurements into an accelerator control system is the main focus of this report. Data from these current monitors is digitized, processed, and stored by a digital data acquisition system. Limitations and drawbacks with the currently deployed digital data acquisition system have been identified as have been potential solutions, or at least improvements, to these problems. This report will discuss and document the efforts we've made in improving the flexibility and lowering the cost of the data acquisition system while maintaining the minimum requirements.

42 ENGINEERING↗

Aluminum Nitride Based MEMS IF Filter Array for Analog Spectral Processors

The purpose of this project was to enable new levels of performance in radio frequency systems, such as adaptability, size and stability, based on aluminum nitride microresonator technology. Early in the project, in 2008, Sandia developed arrays of filters for realizing high scan rate spectrum analyzers at 20 MHz and Rockwell Collins demonstrated a high scan rate spectrum analyzer leveraging this technology in 2009. The filter arrays, because of the transduction physics, demonstrated massively reduced size, loss and impedance compared to existing filter technologies. These device level benefits translated to reduced size and power for the spectrum analyzers at the system level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Data Processor 3 QASPR Project

The following discussion contains a high-level description of methods used to implement software for data processing. It describes the required directory structures and file handling required to use Excel's Visual Basic for Applications programming language and how to identify shot, test and capture types to appropriately process data. It also describes how to interface with the software.

97 MATHEMATICS AND COMPUTING↗

HALEU Decontamination Investigations for EBR-II Recovered Uranium. HALEU Drip Casting Results in the Fuel Conditioning Facility Cathode Processor

Many of the new advanced reactor designs being proposed by the nuclear private sector require uranium fuel enriched between 5 and 20%, otherwise known as High Assay Low Enriched Uranium (HALEU), to support their designs. There are currently no commercial facilities based in the United States which have the capability to produce this material, and as a result the nuclear industry has requested support from the Department of Energy (DOE) to meet this need. One approach being considered by DOE to respond to this demand is to recover highly enriched uranium from used nuclear fuels and downblend it to enrichments less than 20 % U-235. DOE’s past research related to liquid metal fast breeder reactors resulted in the irradiation of more than 3 metric tons (MT) of nuclear fuel composed of highly enriched metallic uranium which resides at the Idaho National Laboratory (INL). This inventory of used nuclear fuel is currently being conditioned using an electrometallurgical treatment process (EMT) to facilitate its eventual disposition to a geologic repository. As part of this treatment process, the highly enriched component of this used fuel is separated, recovered, downblended to <20% U-235, and stored as a metallic uranium ingot. The majority of this fuel was irradiated in the Experimental Breeder Reactor II (EBR-II) over the course of its 30 years of operation. This sodium cooled fast reactor utilized a core composed of highly enriched, sodium-bonded, metallic fuel to sustain or “drive” the reactor. This EBR-II driver fuel is currently being treated for sodium neutralization in the Fuel Conditioning Facility (FCF) at the Materials and Fuels Complex (MFC) and the metallic uranium recovered as a component of this process has been proposed as a potential source of supply of high assay low enriched uranium. The irradiation of the metallic uranium fuel results in the creation of fission products and some minor actinides which are not compatible with many reuse scenario’s, and introduces significant challenges associated with fabrication of new fuel elements using this material. However, it is believed that the current EMT process can be slightly enhanced to address these concerns and result in the recovery of a product that can be considered as a source of supply for HALEU applications. Based on this, DOE requested the INL research methods to enhance the EMT process to produce a recovered uranium material that has a lower contaminant level and lower radiological dose rate and could be utilized in glovebox based fuel fabrication scenarios. The report that follows documents the progress toward meeting this goal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Understanding HPC Benchmark Performance on Intel Broadwell and Cascade Lake Processors

Hardware platforms in high performance computing are constantly getting more complex to handle even when considering multicore CPUs alone. Numerous features and configuration options in the hardware and the software environment that are relevant for performance are not even known to most application users or developers. Microbenchmarks, i.e., simple codes that fathom a particular aspect of the hardware, can help to shed light on such issues, but only if they are well understood and if the results can be reconciled with known facts or performance models. The insight gained from microbenchmarks may then be applied to real applications for performance analysis or optimization. In this paper we investigate two modern Intel x86 server CPU architectures in depth: Broadwell EP and Cascade Lake SP. We highlight relevant hardware configuration settings that can have a decisive impact on code performance and show how to properly measure on-chip and off-chip data transfer bandwidths. The new victim L3 cache of Cascade Lake and its advanced replacement policy receive due attention. Finally we use DGEMM, sparse matrix-vector multiplication, and the HPCG benchmark to make a connection to relevant application scenarios.

97 MATHEMATICS AND COMPUTING↗