Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Enhanced room temperature electronic and thermoelectric properties of the dilute bismuthide InGaBiAs

We report room temperature electronic and thermoelectric properties of Si-doped In{sub 0.52}Ga{sub 0.48}Bi{sub y}As{sub 1-y} with varying Bi concentrations. These films were grown epitaxially on a semi-insulating InP substrate by molecular beam epitaxy. We show that low Bi concentrations are optimal in improving the conductivity, Seebeck coefficient, and thermoelectric power factor, possibly due to the surfactant effects of bismuth. We observed a reduction in thermal conductivity with increasing Bi concentration, which is expected because of alloy scattering. We report a peak ZT of 0.23 at 300 K.

36 MATERIALS SCIENCE↗

SiN{sub x}-induced intermixing in AlInGaAs/InP quantum well through interdiffusion of group III atoms

We analyze the composition profiles within intermixed and non-intermixed AlInGaAs-based multiple quantum wells structures by secondary ion mass spectrometry and observe that the band gap blue shift is mainly attributed to the interdiffusion of In and Ga atoms between the quantum wells and the barriers. Based on these results, several AlInGaAs-based single quantum well (SQW) structures with various compressive strain (CS) levels were grown and their photoluminescence spectra were investigated after the intermixing process involving the encapsulation of thin SiN{sub x} dielectric films on the surface followed by rapid thermal annealing. In addition to the annealing temperature, we report that the band gap shift can be also enhanced by increasing the CS level in the SQW. For instance, at an annealing temperature of 850 Degree-Sign C, the photoluminescence blue shift is found to reach more than 110 nm for the sample with 1.2%-CS SQW, but only 35 nm with 0.4%-CS SQW. We expect that this relatively larger atomic compositional gradient of In (and Ga) between the compressively strained quantum well and the barrier can facilitate the atomic interdiffusion and it thus leads to the larger band gap shift.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High performance InGaAs/GaAsSb terahertz quantum cascade lasers operating up to 142 K

We report on the demonstration of a maximum operating temperature of 142 K for InGaAs-based terahertz quantum cascade lasers. This result is achieved by using the alternative material combination In{sub 0.53}Ga{sub 0.47}As/GaAs{sub 0.51}Sb{sub 0.49}, lattice-matched to InP, which exhibits fabrication advantages over standard In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As due to more suitable material parameters. An active region, based on a three-well phonon depletion design, with improved injection and extraction tunneling coupling, was designed. The devices exhibit threshold current densities of 0.75 kA/cm{sup 2} and provide peak optical powers up to 9 mW. A broad spectral emission range between 3.3 and 4 THz is measured.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

2.8 {mu}m emission from type-I quantum wells grown on InAs{sub x}P{sub 1-x}/InP metamorphic graded buffers

We report 2.8 {mu}m emission from compressively strained type-I quantum wells (QWs) grown on InP-based metamorphic InAs{sub x}P{sub 1-x} step-graded buffers. High quality metamorphic graded buffers showed smooth surface morphology and low threading dislocation densities of approximately 2.5 Multiplication-Sign 10{sup 6} cm{sup -2}. High-resolution x-ray diffraction scans showed strong satellites from multiple quantum wells grown on metamorphic buffers, and cross-sectional transmission electron microscopy revealed smooth and coherent quantum well interfaces. Room-temperature photoluminescence emission at 2.8 {mu}m with a narrow linewidth ({approx}50 meV) shows the promise of metamorphic growth for mid-infrared laser diodes on InP.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Be doping on InP nanowire growth mechanisms

Be-doped InP nanowires were grown by the gold-assisted vapour-liquid-solid mechanism in a gas source molecular beam epitaxy system. The InP nanowire length versus diameter [L(D)] dependence revealed an unexpected transition with increasing Be dopant concentration. At Be dopant concentration below {approx}10{sup 18} cm{sup -3}, nanowires exhibited the usual inverse L(D) relationship, indicating a diffusion-limited growth regime. However, as dopant concentration increased, the nanowire growth rate was suppressed for small diameters, resulting in an unusual L(D) dependence that increased before saturating in height at about 400 nm. The cause of this may be a change in the droplet chemical potential, introducing a barrier to island nucleation. We propose a model accounting for the limitations of diffusion length and monolayer nucleation to explain this behaviour.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Infrared reflectivity spectra of gas-source molecular beam epitaxy grown dilute InN{sub x}As{sub 1-x}/InP (001)

Vibrational spectra of gas-source molecular beam epitaxy grown dilute InN{sub x}As{sub 1-x}/InP (001) alloys are obtained using a Fourier-transform infrared (IR) spectroscopy. A triply degenerate N{sub As} local vibrational mode of T{sub d}-symmetry is observed near 438 cm{sup -1} corresponding to the In-N bond energy. The analysis of composition dependent infrared reflectivity spectra in InNAs has predicted a two-phonon-mode behavior. In In(Ga)-rich GaInNAs alloys the observed splitting of the N{sub As} local mode into a doublet for the N{sub As}-Ga{sub 1}(In{sub 1})In{sub 3}(Ga{sub 3}) pair-defect of C{sub 3v}-symmetry is consistent with our simulated results based on a sophisticated Green's function theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GaNAsP: An intermediate band semiconductor grown by gas-source molecular beam epitaxy

Dilute nitride GaNAsP thin films were grown via a GaAsP metamorphic buffer on GaP(100) substrate with gas-source molecular beam epitaxy. The compositions of this III-V-V-V compound were determined by channeling Rutherford backscattering spectroscopy and nuclear reaction analysis. Photoreflectance shows two distinctive transitions from the valence band to the split conduction bands due to N incorporation. Photoluminescence and optical absorption show the fundamental bandgap of Ga(N)AsP is largely tailored by the small amount of N. The observed multiband characteristics and the bandgap tunability of GaNAsP are two merits that fit into the intermediate-band solar cell roadmap, and GaNAsP of high crystal quality provides a strong candidate for intermediate band solar cell materials.

36 MATERIALS SCIENCE↗

Observation of two-dimensional p-type dopant diffusion across a p{sup +}-InP/n{sup -}-InGaAs interface using scanning electron microscopy

Scanning electron microscopy (SEM) with potential calculations has been shown to be effective for the detection of p-type dopant diffusion, even across a Zn doped p{sup +}-InP/non-doped n{sup -}-InGaAs/n{sup +}-InP heterojunction. Heterojunction samples were observed using SEM and the electrostatic potential was calculated from Zn concentration profiles obtained by secondary ion mass spectrometry. The sensitivity of SEM for the potential was derived from the SEM observations and potential calculation results. The results were then used to investigate the dependence of the SEM contrast on the Zn diffusion length across the p{sup +}-InP/non-doped n{sup -}-InGaAs interface. Accurate dopant mapping was difficult when the Zn diffusion length was shorter than 30 nm, because the heterojunction affects the potential at the interface. However, accurate dopant mapping was possible when the Zn diffusion length was longer than 30 nm, because the factor dominating the potential variation was not the heterojunction, but rather Zn diffusion 30 nm distant from the interface. Thus, Zn diffusion further than 30 nm from a Zn-doped p{sup +}-InP/non-doped n{sup -}-InGaAs interface can be effectively detected by secondary electron (SE) imaging. SE imaging with potential calculations can be widely used for accurate dopant mapping, even at heterojunctions, and is, therefore, expected to be of significant assistance to the compound semiconductor industry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single domain Bi{sub 2}Se{sub 3} films grown on InP(111)A by molecular-beam epitaxy

We report the growth of single-domain epitaxial Bi{sub 2}Se{sub 3} films on InP(111)A substrate by molecular-beam epitaxy. Nucleation of Bi{sub 2}Se{sub 3} proceeds at steps, so the lattices of the substrate play the guiding role for a unidirectional crystalline film in the step-flow growth mode. There exists a strong chemical interaction between atoms at the heterointerface, so the growth does not follow the van der Waals epitaxy process. A mounded morphology of thick Bi{sub 2}Se{sub 3} epilayers suggests a growth kinetics dictated by the Ehrlich-Schwoebel barrier. The Schubnikov de Haas oscillations observed in magnetoresistance measurements are attributed to Landau quantization of the bulk states of electrons.

36 MATERIALS SCIENCE↗

In situ study of HfO{sub 2} atomic layer deposition on InP(100)

The interfacial chemistry of the native oxide and chemically treated InP samples during atomic layer deposition (ALD) HfO{sub 2} growth at 250 Degree-Sign C has been studied by in situ X-ray photoelectron spectroscopy. The In-oxide concentration is seen to gradually decrease on the native oxide and acid etched samples. No significant changes of the P-oxide concentrations are detected, while the P-oxides chemical states are seen to change gradually during the initial cycles of ALD on the native oxide and the chemically treated samples. (NH{sub 4}){sub 2}S treatment strongly decreases In-oxide and P-oxide concentrations prior to ALD and maintains low concentrations during the ALD process.

36 MATERIALS SCIENCE↗

Terahertz quantum cascade lasers based on quaternary AlInGaAs barriers

Terahertz quantum cascade lasers incorporating lattice-matched quaternary AlInGaAs barriers grown by molecular beam epitaxy on InP substrate are reported. Four quantum well active region devices exhibited lasing at 3.8 THz with threshold current densities as low as 74 A/cm{sup 2} at 10 K. From optical characterization and a doping study of the active region, an upper state lifetime of 8 ps, as well as a long transport time across the active region of 68 ps and a ratio of free carrier loss to gain cross sections of 4.6%, is reported. A maximum operating temperature of 130 K was achieved for a device with a conduction band discontinuity of 0.14 eV.

36 MATERIALS SCIENCE↗

Indium diffusion through high-k dielectrics in high-k/InP stacks

Evidence of indium diffusion through high-k dielectric (Al{sub 2}O{sub 3} and HfO{sub 2}) films grown on InP (100) by atomic layer deposition is observed by angle resolved X-ray photoelectron spectroscopy and low energy ion scattering spectroscopy. The analysis establishes that In-out diffusion occurs and results in the formation of a PO{sub x} rich interface.

36 MATERIALS SCIENCE↗

Electronic structure, morphology and emission polarization of enhanced symmetry InAs quantum-dot-like structures grown on InP substrates by molecular beam epitaxy

The optical and structural properties of a new kind of InAs/InGaAlAs/InP quantum dot (QD)-like objects grown by molecular beam epitaxy have been investigated. These nanostructures were found to have significantly more symmetrical shapes compared to the commonly obtained dash-like geometries typical of this material system. The enhanced symmetry has been achieved due to the use of an As{sub 2} source and the consequent shorter migration length of the indium atoms. Structural studies based on a combination of scanning transmission electron microscopy (STEM) and atom probe tomography (APT) provided detailed information on both the structure and composition distribution within an individual nanostructure. However, it was not possible to determine the lateral aspect ratio from STEM or APT. To verify the in-plane geometry, electronic structure calculations, including the energy levels and transition oscillator strength for the QDs have been performed using an eight-band k·p model and realistic system parameters. The results of calculations were compared to measured polarization-resolved photoluminescence data. On the basis of measured degree of linear polarization of the surface emission, the in-plane shape of the QDs has been assessed proving a substantial increase in lateral symmetry. This results in quantum-dot rather than quantum-dash like properties, consistent with expectations based on the growth conditions and the structural data.

36 MATERIALS SCIENCE↗

In situ study of atomic layer deposition Al{sub 2}O{sub 3} on GaP (100)

The interfacial chemistry of atomic layer deposition (ALD) of Al{sub 2}O{sub 3} on chemically treated GaP (100) has been studied using in situ X-ray photoelectron spectroscopy. A “self-cleaning” effect for Ga-oxide upon exposure to trimethylaluminum is seen to be efficient on the native oxide and chemically treated surfaces. The phosphorus oxide chemical states are seen to change during the ALD process, but the total concentration of P-oxides is seen to remain constant throughout the ALD process.

36 MATERIALS SCIENCE↗

In situ study of the role of substrate temperature during atomic layer deposition of HfO{sub 2} on InP

The dependence of the “self cleaning” effect of the substrate oxides on substrate temperature during atomic layer deposition (ALD) of HfO{sub 2} on various chemically treated and native oxide InP (100) substrates is investigated using in situ X-ray photoelectron spectroscopy. The removal of In-oxide is found to be more efficient at higher ALD temperatures. The P oxidation states on native oxide and acid etched samples are seen to change, with the total P-oxide concentration remaining constant, after 10 cycles of ALD HfO{sub 2} at different temperatures. An (NH{sub 4}){sub 2} S treatment is seen to effectively remove native oxides and passivate the InP surfaces independent of substrate temperature studied (200 °C, 250 °C and 300 °C) before and after the ALD process. Density functional theory modeling provides insight into the mechanism of the changes in the P-oxide chemical states.

36 MATERIALS SCIENCE↗

Surface InP/In{sub 0.48}Ga{sub 0.52}P quantum dots: Carrier recombination dynamics and their interaction with fluorescent dyes

We describe the properties and carrier dynamics of surface InP quantum dots (QDs) on In{sub 0.48}Ga{sub 0.52}P, lattice-matched to GaAs (100). The structures were grown using gas-source molecular beam epitaxy. The average height and lateral size of the dots are in the range of 2–6 and 30–50 nm, respectively. The photoluminescence of the surface dots peaks between 750 and 830 nm, depending on the growth conditions, and is red-shifted compared to the emission of the capped QDs grown under similar conditions. The integrated photoluminescence intensity is comparable to that of the capped QDs. The decay time of both surface and capped QDs is around 1 ns at 15 K. The strong luminescence of surface QDs is explained by the effect of acting vacuum/air as an effective barrier and saturated surface states. Enhancement of the QDs luminescence is observed for the samples coated with a fluorescent dye.

36 MATERIALS SCIENCE↗

Cascaded emission of linearly polarized single photons from positioned InP/GaInP quantum dots

We report on the optical characterization of site-controlled InP/GaInP quantum dots (QDs). Spatially resolved low temperature cathodoluminescence proves the long-range ordering of the buried emitters, revealing a yield of ∼90% of optically active, positioned QDs and a strong suppression of emitters on interstitial positions. The emission of single QDs shows a pronounced degree of linear polarization along the [0,−1,1] crystal axis with an average degree of polarization of 94%. Photon correlation measurements of the emission from a single QD indicate the single-photon character of the exciton and biexciton emission lines as well as the cascaded nature of the photon pair.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗