Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PELLETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

High power thyristors with 5 kV blocking voltage. Volume 1: Development of high-voltage-thyristors (4.5 kV) with good dynamic properties

Using neutron irradiated silicon with considerably lower spread in resistivity as compared to conventionally doped silicon it was possible to produce power thyristors with breakdown voltages between 3.5 kV and 5.5 kV. The thyristor pellets have a diameter of 50 mm. Maximum average on-state currents of 600 to 800 A can be reached with these elements. The dynamic properties of the thryistors could be improved to allow standard applications up to maximum repetitive voltages of 4.5 kV.

Lock, K.↗
NASA NTRS1980

Silicon web process development

A barrier crucible design which consistently maintains melt stability over long periods of time was successfully tested and used in long growth runs. The pellet feeder for melt replenishment was operated continuously for growth runs of up to 17 hours. The liquid level sensor comprising a laser/sensor system was operated, performed well, and meets the requirements for maintaining liquid level height during growth and melt replenishment. An automated feedback loop connecting the feed mechanism and the liquid level sensing system was designed and constructed and operated successfully for 3.5 hours demonstrating the feasibility of semi-automated dendritic web growth. The sensitivity of the cost of sheet, to variations in capital equipment cost and recycling dendrites was calculated and it was shown that these factors have relatively little impact on sheet cost. Dendrites from web which had gone all the way through the solar cell fabrication process, when melted and grown into web, produce crystals which show no degradation in cell efficiency. Material quality remains high and cells made from web grown at the start, during, and the end of a run from a replenished melt show comparable efficiencies.

Duncan, C. S.↗
NASA NTRS1980

Cell module and fuel conditioner

The computer code for the detailed analytical model of the MK-2 stacks is described. An ERC proprietary matrix is incorporated in the stacks. The mechanical behavior of the stack during thermal cycles under compression was determined. A 5 cell stack of the MK-2 design was fabricated and tested. Designs for the next three stacks were selected and component fabrication initiated. A 3 cell stack which verified the use of wet assembly and a new acid fill procedure were fabricated and tested. Components for the 2 kW test facility were received or fabricated and construction of the facility is underway. The definition of fuel and water is used in a study of the fuel conditioning subsystem. Kinetic data on several catalysts, both crushed and pellets, was obtained in the differential reactor. A preliminary definition of the equipment requirements for treating tap and recovered water was developed.

Hoover, D. Q., Jr.↗
NASA NTRS1980

The factors influencing the formation of Li2CO3 from LiOH and CO2

LiOH is used to remove CO2 from the atmosphere in three environmental control systems of the Shuttle program, and the investigation of the performance dependent parameters for the CO2 reaction with LiOH is reported. Emphasis is placed on LiOH quality acceptance criteria and on identifiying the relationships between the reaction rate and the following independent parameters: temperature, CO2 partial pressure (PP), H2O concentration in the solid, amount of remaining LiOH and the porosity of the LiOH pellets. Results showed that the reaction rate is proportional to the CO2 PP for PP at least as high as 40 mm Hg (5330 N/sq m). It is also noted that a significant difference in the reactivity of wet and dry LiOH was not detected.

Davis, S. H., Jr.↗
NASA NTRS1981

Large area sheet task. Advanced dendritic web growth development

The development of a silicon dendritic web growth machine is discussed. Several refinements to the sensing and control equipment for melt replenishment during web growth are described and several areas for cost reduction in the components of the prototype automated web growth furnace are identified. A circuit designed to eliminate the sensitivity of the detector signal to the intensity of the reflected laser beam used to measure melt level is also described. A variable speed motor for the silicon feeder is discussed which allows pellet feeding to be accomplished at a rate programmed to match exactly the silicon removed by web growth.

Duncan, C. S.↗
NASA NTRS1980

Spacelab flight simulated by two monkeys at CERMA

A semiautomatic module for two monkeys was designed. The module shelters two Rhesus monkeys seated side by side in a compartment, reducing the emotional stresses caused by isolation. Food pellets, water, and air are supplied and body wastes are automatically removed. Physiological and environmental parameters are continually monitored, making possible the performance of experiments concerning the pathophysiological mechanisms of the disorders of weightlessness. A ten day flight of the module in Spacelab was simulated.

Langereux, P.↗
NASA NTRS1981

The electric rail gun for space propulsion

An analytic feasibility investigation of an electric propulsion concept for space application is described. In this concept, quasistatic thrust due to inertial reaction to repetitively accelerated pellets by an electric rail gun is used to propel a spacecraft. The study encompasses the major subsystems required in an electric rail gun propulsion system. The mass, performance, and configuration of each subsystem are described. Based on an analytic model of the system mass and performance, the electric rail gun mission performance as a reusable orbital transfer vehicle (OTV) is analyzed and compared to a 30 cm ion thruster system (BIMOD) and a chemical propulsion system (IUS) for payloads with masses of 1150 kg and 2300 kg. For system power levels in the range from 25 kW(e) to 100 kW(e) an electric rail gun OTV is more attractive than a BIMOD system for low Earth orbit to geosynchronous orbit transfer durations in the range from 20 to 120 days.

Bauer, D. P.↗
NASA NTRS1981

Applications of polymer extrusion technology to coal processing

Upon heating, many of the middle-aged bituminous coals exhibit a plasticity very similar to polyethylene for a few minutes. Plastic coal can be extruded, pelletized or molded using common plastics technology and equipment. Investigations concerning the plastic state of coals are conducted with the objective to develop techniques which will make useful commercial applications of this property possible. Experiments which show the characteristics of plastic-state coal are discussed, and problems related to a continuous extrusion of coal are considered. Probably the most significant difference between the continuous extrusion of coal and the extrusion of a thermoplastic polymer is that volatiles are continuously being released from the coal. Attention is given to aspects of dragflow, solids feeding, and melt pumping. Application potentials for plastic coal extrusion might be related to coal gasification, direct liquefaction, and coal combustion.

Lewis, D. W.↗
NASA NTRS1983

Theory of Compound Liquid Drops

Dynamic behavior is analyzed for drop within drop within infinite fluid. Report gives theoretical basis for understanding behavior of compound drops. Aids in planning and interpreting experiments in laboratory, spacecraft, and research aircraft. Provides insight into fabrication of target pellets for nuclear fusion.

Saffren, M. M.↗
NASA NTRS1982

Generation of a strong core centering force in a submillimeter compound droplet system

By amplitude-modulating the driving voltage of an acoustic levitating apparatus, a strong core centering force was generated in a submillimeter compound droplet system suspended by the radiation pressure in a gaseous medium. Depending on the acoustic characteristics of the droplet system, it was found that the technique can be utilized advantageously in the multiple-layer coating of an inertial confinement fusion pellet.

Lee, M. C.↗
NASA NTRS1983

Hollow-Sphere Production Line

After initial formation, spheroids processed without contaminating touch of solid objects. Spheroid in process supported by acoustic levitation at each work station and transported between stations by combination of acoustic levritation and acoustic propulsion. Automatic sequence of target-pellet fabication allows no contact of solid ojbect with spheroids in process. Potential for manufacture of precise microcapsules for catalysts and medications.

Lee, M. C.↗
NASA NTRS1984

Imaging Bubble Formation In a Drop Tube

Entire process under control of computer. Computer-controlled image-acquisition system tracks object, such as water bubble, as it moves in drop tube. Ultimately, such tracking system used to observe fusion-pellet formation in drop furnace.

Helizon, R.↗
NASA NTRS1984

Sampling of Silicon Powder for Impurity Analysis

Electron beam forms dense pellets of powdered silicon for Zeeman analysis. Sampling method focuses electron beam on submicron silicon powder. Process enhances quality control in production of low-cost silicon powder for semiconductor industry.

Yamakawa, K. A.↗
NASA NTRS1983

Radioactive nuclear waste stabilization - Aspects of solid-state molecular engineering and applied geochemistry

Stabilization techniques for the storage of radioactive wastes are surveyed, with emphasis on immobilization in a primary barrier of synthetic rock. The composition, half-life, and thermal-emission characteristics of the wastes are shown to require thermally stable immobilization enduring at least 100,000 years. Glass materials are determined to be incapable of withstanding the expected conditions, average temperatures of 100-500 C for the first 100 years. The geological-time stability of crystalline materials, ceramics or synthetic rocks, is examined in detail by comparing their components with similar naturally occurring minerals, especially those containing the same radioactive elements. The high-temperature environment over the first 100 years is seen as stabilizing, since it can recrystallize radiation-induced metamicts. The synthetic-rock stabilization technique is found to be essentially feasible, and improvements are suggested, including the substitution of nepheline with freudenbergite and priderite for alkaline-waste stabilization, the maintenance of low oxygen fugacity, and the dilution of the synthetic-rock pellets into an inert medium.

Haggerty, S. E.↗
NASA NTRS1983

Electron temperature differences and double layers

Electron temperature differences across plasma double layers are studied experimentally. It is shown that the temperature differences across a double layer can be varied and are not a result of thermalization of the bump-on-tail distribution. The implications of these results for electron thermal energy transport in laser-pellet and tandem-mirror experiments are also discussed.

Chan, C.↗
NASA NTRS1985

Improved Melt-Level Control System

Laser feedback control automatically maintains silicon melt levels. During long-term growth of dendritic-web silicon, silicon melt level controlled and held nearly constant using laser feedback system to sense level of melt and control silicon-pellet feed rate.

Meier, D. L.↗
NASA NTRS1985

Silicon-Web-Growing Machine

Silicon replenished automatically as web is withdrawn. Semiautomatic silicon-web-growing machine set down in detailed engineering drawings. Melt level sensed with He/Ne laser beam and melt-level error signal used to control motor-driven pellet feeder, speeding up when level is low. System reduces demand upon operator's time.

Duncan, C.↗