SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The main characteristics of standard pre-main sequence (PMS) models are described. A discussion of the uncer-tainties affecting the current generation of PMS evolutionary tracks and isochrones is also provided. In particular, the impact of the uncertainties in the adopted equation of state, radiative opacity, nuclear cross sections, and initial chemical abundances are analysed.
We present a benchmark measurement of the electron density profile in the region where the electron density is 10{sup 19 }cm{sup –3} and where the bulk of extreme ultraviolet (EUV) emission occurs from isotropically expanding spherical high-Z gadolinium plasmas. It was found that, due to opacity effects, the observed EUV emission is mostly produced from an underdense region. We have analyzed time-resolved emission spectra with the aid of atomic structure calculations and find the multiple ion charge states around 18+ during the laser pulse irradiation.
The electrical and optical properties of warm dense beryllium along the principal Hugoniot for temperatures from 0.95 eV to 10.65 eV and densities from 3.8 to 6.0 g/cm{sup 3} are investigated by using quantum molecular dynamics (QMD) simulations combined with the Kubo-Greenwood formulation. The dc conductivity σ{sub dc} and the ionization fraction are yielded by fitting the optical conductivity with the Drude-Smith model. The first-principles transport coefficients are compared with results of the Lee-More model and the Brysk model [Plasma Phys. 17, 473 (1975)]. Compared with the QMD result, the Lee-More model underestimates σ{sub dc} by 87% at low temperatures, approaches the QMD result gradually with the temperature rising, yet still underestimates σ{sub dc} by 49% corresponding to the temperature 10.65 eV. In the whole temperature range under investigation, the Brysk model overestimates the electronic thermal conductivity κ while the Lee-More model underestimates κ. The differences are reduced with the temperature increasing. At the temperature 10.65 eV, the Brysk κ is still around twice as large as the QMD result, and the Lee-More κ is smaller than the QMD data by about 40%. In addition, QMD Rosseland mean opacities are shown to be three orders of magnitude larger than results of the average-atom model.
We report new assignments of vibration-rotation line positions of methane ({sup 12}CH{sub 4}) in the so-called dyad (ν{sub 2}/ν{sub 4}) region (1100–1500 cm{sup −1}), and the resulting update of the vibration-rotation effective model of methane, previously reported by Nikitin et al. [Phys. Chem. Chem. Phys. 15, 10071 (2013)], up to and including the tetradecad. High resolution (0.01 cm{sup −1}) emission spectra of methane have been recorded up to about 1400 K using the high-enthalpy source developed at Institut de Physique de Rennes associated with the Fourier transform spectrometer of the SOLEIL synchrotron facility (AILES beamline). Analysis of these spectra allowed extending rotational assignments in the well-known cold band (dyad-ground state (GS)) and related hot bands in the pentad–dyad system (3000 cm{sup −1}) up to J{sub max} = 30 and 29, respectively. In addition, 8512 new transitions belonging to the octad–pentad (up to J = 28) and tetradecad-octad (up to J = 21) hot band systems were successfully identified. As a result, the MeCaSDa database of methane was significantly improved. The line positions assigned in this work, together with the information available in the literature, were fitted using 1096 effective parameters with a dimensionless standard deviation σ = 2.09. The root mean square deviations d{sub RMS} are 3.60 × 10{sup −3} cm{sup −1} for dyad-GS cold band, 4.47 ×10{sup −3} cm{sup −1} for the pentad–dyad, 5.43 × 10{sup −3} cm{sup −1} for the octad–pentad, and 4.70 × 10{sup −3} cm{sup −1} for the tetradecad–octad hot bands. The resulting new line list will contribute to improve opacity and radiative transfer models for hot atmospheres, such as those of hot-Jupiter type exoplanets.
Here, we propose to exploit the low energy bandwidth, small wavelength, and penetration power of ultrashort pulses from XFELs for resonant Small Angle Scattering (SAXS) on plasma structures in laser excited plasmas. Small angle scattering allows to detect nanoscale density fluctuations in forward scattering direction. Typically, the SAXS signal from laser excited plasmas is expected to be dominated by the free electron distribution. We propose that the ionic scattering signal becomes visible when the X-ray energy is in resonance with an electron transition between two bound states (resonant coherent X-ray diffraction). In this case, the scattering cross-section dramatically increases so that the signal of X-ray scattering from ions silhouettes against the free electron scattering background which allows to measure the opacity and derived quantities with high spatial and temporal resolution, being fundamentally limited only by the X-ray wavelength and timing. Deriving quantities such as ion spatial distribution, charge state distribution, and plasma temperature with such high spatial and temporal resolution will make a vast number of processes in shortpulse laser-solid interaction accessible for direct experimental observation, e.g., hole-boring and shock propagation, filamentation and instability dynamics, electron transport, heating, and ultrafast ionization dynamics.
The good light output of siloxane based scintillators as displayed under γ-rays and α particles has been exploited here to obtain clear and reliable response toward thermal neutrons. Sensitization towards thermal neutrons has been pursued by adding {sup 6}LiF, in form of nanoparticles. Aiming at the enhancement of compatibility between the inorganic nanoparticles and the low polarity, siloxane based surrounding medium, oleic acid-capped {sup 6}LiF nanoparticles have been synthesized by thermal decomposition of Li trifluoroacetate. Thin pellets siloxane scintillator maintained their optical transmittance up to weight load of 2% of {sup 6}Li. Thin samples with increasing {sup 6}Li concentration and thicker ones with fixed {sup 6}Li amount have been prepared and tested with several sources (α, γ-rays, moderated neutrons). Light output as high as 80% of EJ212 under α irradiation was measured with thin samples, and negligible changes have been observed as a result of {sup 6}LiF addition. In case of thick samples, severe light loss has been observed, as induced by opacity. Nevertheless, thermal neutrons detection has been assessed and the data have been compared with GS20, based on Li glass, taken as a reference material.
In this work, electron induced modifications on the bulk etch rate, structural and optical parameters of CR-39 polymer were studied using gravimetric, FTIR (Fourier Transform Infrared) and UV–vis (Ultraviolet–Visible) techniques, respectively. CR-39 samples were irradiated with 10 MeV electron beam for different durations to have the absorbed doses of 1, 10, 550, 5500, 16 500, and 55 000 kGy. From the FTIR analysis, the peak intensities at different bands were found to be changing with electron dose. A few peaks were observed to shift at high electron doses. From the UV-vis analysis, the optical band gaps for both direct and indirect transitions were found to be decreasing with the increase in electron dose whereas the opacity, number of carbon atoms in conjugation length, and the number of carbon atoms per cluster were found to be increasing. The bulk etch rate was observed to be increasing with the electron dose. The primary objective of this investigation was to study the response of CR-39 to high electron doses and to determine a suitable pre-irradiation condition. The results indicated that, the CR-39 pre-irradiated with electrons can have better sensitivity and thus can be potentially applied for neutron dosimetry.
A point-projection soft X-ray Opacity Spectrometer (OpSpec) has been implemented to measure X-ray spectra from ~1 to 2 keV on the National Ignition Facility (NIF). Measurement of such soft X-rays with open-aperture point-projection detectors is challenging because only very thin filters may be used to shield the detector from the hostile environment. OpSpec diffracts X-rays from 540 to 2100 eV off a potassium (or rubidium) acid phthalate (KAP or RbAP) crystal onto either image plates or, most recently, X-ray films. A “sacrificial front filter” strategy is used to prevent crystal damage, while 2 or 3 rear filters protect the data. Since May 2017, OpSpec has been recording X-ray transmission data for iron-magnesium plasmas on the NIF, at “Anchor 1” plasma conditions (temperature ~150 eV, density ~7 × 10 21 e - /cm 3 ). Upgrades improved OpSpec’s performance on 6 NIF shots in August and December 2017, with reduced backgrounds and 100% data return using filter stacks as thin as 2.9 μm (total). We conclude that photometric noise is beginning to meet requirements, and further work will reduce systematic errors.
The discovery of a detached dust shell around the Wolf-Rayet (WR) star WR60-6 in the young stellar cluster VVV CL036 is reported. This shell is uncovered through the Spitzer-MIPS 24 μm image, where it appears brightest, and it is invisible at shorter wavelengths. Using new APEX observations and other data available from the literature, we have estimated some of the shell parameters: the inner and outer radii of 0.15 and 0.90 pc, respectively; the overall systemic velocity of the molecular {sup 12}CO(3 → 2) emission of –45.7 ± 2.3 km s{sup –1}; an expansion velocity of the gas of 16.3 ± 1 km s{sup –1}; the dust temperature and opacity of 122 ± 12 K and 1.04, respectively; and an age of 2.8 × 10{sup 4} yr. The WR star displays some cyclic variability. The mass computed for the WR60-6 nebula indicates that the material was probably ejected during its previous stages of evolution. In addition, we have identified a bright spot very close to the shell, which can be associated with the Midcourse Space Experiment source G312.13+00.20.
Since the first report of a potentially non-solar carbon-to-oxygen ratio (C/O) in its dayside atmosphere, the highly irradiated exoplanet WASP-12b has been under intense scrutiny and the subject of many follow-up observations. Additionally, the recent discovery of stellar binary companions ∼1'' from WASP-12 has obfuscated interpretation of the observational data. Here we present new ground-based multi-object transmission-spectroscopy observations of WASP-12b that we acquired over two consecutive nights in the red optical with Gemini-N/GMOS. After correcting for the influence of WASP-12's stellar companions, we find that these data rule out a cloud-free H{sub 2} atmosphere with no additional opacity sources. We detect features in the transmission spectrum that may be attributed to metal oxides (such as TiO and VO) for an O-rich atmosphere or to metal hydrides (such as TiH) for a C-rich atmosphere. We also reanalyzed NIR transit-spectroscopy observations of WASP-12b from HST/WFC3 and broadband transit photometry from Warm Spitzer. We attribute the broad spectral features in the WFC3 data to either H{sub 2}O or CH{sub 4} and HCN for an O-rich or C-rich atmosphere, respectively. The Spitzer data suggest shallower transit depths than the models predict at infrared wavelengths, albeit at low statistical significance. A multi-instrument, broad-wavelength analysis of WASP-12b suggests that the transmission spectrum is well approximated by a simple Rayleigh scattering model with a planet terminator temperature of 1870 ± 130 K. We conclude that additional high-precision data and isolated spectroscopic measurements of the companion stars are required to place definitive constraints on the composition of WASP-12b's atmosphere.
We present observational results of the γ-ray blazar 3C 66A at 2.3, 8.4, and 22 GHz at four epochs during 2004–2005 with the VLBA. The resulting images show an overall core-jet structure extending roughly to the south, with two intermediate breaks occurring in the region near the core. By model-fitting to the visibility data, the northmost component, which is also the brightest, is identified as the core according to its relatively flat spectrum and its compactness. Combining our results with previous results to investigate the proper motions of the jet components, we found the kinematics of 3C 66A to be quite complicated, with components of inward and outward, subluminal and superluminal motions all detected in the radio structure. The superluminal motions indicate strong Doppler boosting exists in the jet. The apparent inward motions of the innermost components last for at least 10 years and could not be caused by newborn components. A possible reason could be non-stationarity of the core due to opacity change.
We investigated the absolute age of the Galactic globular cluster M71 (NGC 6838) using optical ground-based images (u{sup ′},g{sup ′},r{sup ′},i{sup ′},z{sup ′}) collected with the MegaCam camera at the Canada–France–Hawaii Telescope (CFHT). We performed a robust selection of field and cluster stars by applying a new method based on the 3D (r{sup ′},u{sup ′}−g{sup ′},g{sup ′}−r{sup ′}) color–color–magnitude diagram. A comparison between the color–magnitude diagram (CMD) of the candidate cluster stars and a new set of isochrones at the locus of the main sequence turn-off (MSTO) suggests an absolute age of 12 ± 2 Gyr. The absolute age was also estimated using the difference in magnitude between the MSTO and the so-called main sequence knee, a well-defined bending occurring in the lower main sequence. This feature was originally detected in the near-infrared bands and explained as a consequence of an opacity mechanism (collisionally induced absorption of molecular hydrogen) in the atmosphere of cool low-mass stars. The same feature was also detected in the r′, u{sup ′}−g{sup ′}, and in the r{sup ′},g{sup ′}−r{sup ′} CMD, thus supporting previous theoretical predictions by Borysow et al. The key advantage in using the Δ{sub TO}{sup Knee} as an age diagnostic is that it is independent of uncertainties affecting the distance, the reddening, and the photometric zero point. We found an absolute age of 12 ± 1 Gyr that agrees, within the errors, with similar age estimates, but the uncertainty is on average a factor of two smaller. We also found that the Δ{sub TO}{sup Knee} is more sensitive to the metallicity than the MSTO, but the dependence vanishes when using the difference in color between the MSK and the MSTO.
The 229 GHz ({lambda}1.3 mm) radio emission from Orion-KL was mapped with up to 0.''14 angular resolution with CARMA, allowing measurements of the flux densities of Source I ({sup S}rcI{sup )} and the Becklin-Neugebauer Object (BN), the two most massive stars in this region. We find integrated flux densities of 310 {+-} 45 mJy for SrcI and 240 {+-} 35 mJy for BN. SrcI is optically thick even at 229 GHz. No trace of the H30{alpha} recombination line is seen in its spectrum, although the v {sub 2} = 1, 5(5,0)-6(4,3) transition of H{sub 2}O, 3450 K above the ground state, is prominent. SrcI is elongated at position angle 140 Degree-Sign , as in 43 GHz images. These results are most easily reconciled with models in which the radio emission from SrcI arises via the H{sup -} free-free opacity in a T < 4500 K disk, as considered by Reid et al. By contrast, the radio spectrum of BN is consistent with p {sup +}/e {sup -} free-free emission from a dense (n{sub e} {approx} 5 Multiplication-Sign 10{sup 7} cm{sup -3}), but otherwise conventional, hypercompact H II region. The source is becoming optically thin at 229 GHz, and the H30{alpha} recombination line, at V {sub LSR} = 23.2 {+-} 0.5 km s{sup -1}, is prominent in its spectrum. A Lyman continuum flux of 5 Multiplication-Sign 10{sup 45} photons s{sup -1}, consistent with that expected from a B star, is required to maintain the ionization. Supplementary 90 GHz observations were made to measure the H41{alpha} and H42{alpha} recombination lines toward BN. Published 43 and 86 GHz data suggest that SrcI brightened with respect to BN over the 15 year period from 1994 to 2009.
Two important avenues into understanding the formation and evolution of galaxies are the Kennicutt-Schmidt (K-S) and Elmegreen-Silk (E-S) laws. These relations connect the surface densities of gas and star formation ({Sigma}{sub gas} and {Sigma}-dot{sub *}, respectively) in a galaxy. To elucidate the K-S and E-S laws for disks where {Sigma}{sub gas} {approx}> 10{sup 4} M{sub Sun} pc{sup -2}, we compute 132 Eddington-limited star-forming disk models with radii spanning tens to hundreds of parsecs. The theoretically expected slopes ( Almost-Equal-To 1 for the K-S law and Almost-Equal-To 0.5 for the E-S relation) are relatively robust to spatial averaging over the disks. However, the star formation laws exhibit a strong dependence on opacity that separates the models by the dust-to-gas ratio that may lead to the appearance of a erroneously large slope. The total infrared luminosity (L{sub TIR}) and multiple carbon monoxide (CO) line intensities were computed for each model. While L{sub TIR} can yield an estimate of the average {Sigma}-dot{sub *} that is correct to within a factor of two, the velocity-integrated CO line intensity is a poor proxy for the average {Sigma}{sub gas} for these warm and dense disks, making the CO conversion factor ({alpha}{sub CO}) all but useless. Thus, observationally derived K-S and E-S laws at these values of {Sigma}{sub gas} that uses any transition of CO will provide a poor measurement of the underlying star formation relation. Studies of the star formation laws of Eddington-limited disks will require a high-J transition of a high density molecular tracer, as well as a sample of galaxies with known metallicity estimates.
Gas accreting onto a galaxy will be of low metallicity while halo gas due to a galactic fountain will be of near-solar metallicity. We test these predictions by measuring the metal absorption line properties of halo gas 5 kpc above the plane of the edge-on galaxy NGC 891, using observations taken with HST/STIS toward a bright background quasar. Metal absorption lines of Fe II, Mg II, and Mg I in the halo of NGC 891 are clearly seen, and when combined with recent deep H I observations, we are able to place constraints on the metallicity of the halo gas for the first time. The H I line width defines the line broadening, from which we model opacity effects in these metal lines, assuming that the absorbing gas is continuously distributed in the halo. The gas-phase metallicities are [Fe/H] = -1.18 {+-} 0.07 and [Mg/H] = -0.23 + 0.36/ - 0.27 (statistical errors) and this difference is probably due to differential depletion onto grains. When corrected for such depletion using Galactic gas as a guide, both elements have approximately solar or even supersolar abundances. This suggests that the gas is from the galaxy disk, probably expelled into the halo by a galactic fountain, rather than from accretion of intergalactic gas, which would have a low metallicity. The abundances would be raised by significant amounts if the absorbing gas lies in a few clouds with thermal widths smaller than the rotational velocity of the halo. If this is the case, both the abundances and [Mg/Fe] would be supersolar.
We present radiation transfer simulations of a massive (8 M{sub Sun }) protostar forming from a massive (M{sub c} = 60 M{sub Sun }) protostellar core, extending the model developed by Zhang and Tan. The two principal improvements are (1) developing a model for the density and velocity structure of a disk wind that fills the bipolar outflow cavities, based in part on the disk-wind model of Blandford and Payne; and (2) solving for the radially varying accretion rate in the disk due to a supply of mass and angular momentum from the infall envelope and their loss to the disk wind. One consequence of the launching of the disk wind is a reduction in the amount of accretion power that is radiated by the disk. We also include a non-Keplerian potential appropriate for a growing, massive disk. For the transition from dusty to dust-free conditions where gas opacities dominate, we now implement a gradual change as a more realistic approximation of dust destruction. We study how the above effects, especially the outflow, influence the spectral energy distributions (SEDs) and the synthetic images of the protostar. Dust in the outflow cavity significantly affects the SEDs at most viewing angles. It further attenuates the short-wavelength flux from the protostar, controlling how the accretion disk may be viewed, and contributes a significant part of the near- and mid-IR fluxes. These fluxes warm the disk, boosting the mid- and far-IR emission. We find that for near face-on views, i.e., looking down the outflow cavity (although not too close to the axis), the SED from the near-IR to about 60 {mu}m is very flat, which may be used to identify such systems. We show that the near-facing outflow cavity and its walls are still the most significant features in images up to 70 {mu}m, dominating the mid-IR emission and determining its morphology. The thermal emission from the dusty outflow itself dominates the flux at {approx}20 {mu}m. The detailed distribution of the dust in the outflow affects the morphology, so the model can be constrained by considering detailed intensity profiles along and perpendicular to the outflow axis. For example, even though the outflow cavity is wide, at 10-20 {mu}m, the dust in the disk wind can make the outflow appear narrower than in the near-IR bands.
We report on a high angular resolution survey of circumstellar disks around 24 northern sky Be stars. The K-band continuum survey was made using the CHARA Array long baseline interferometer (baselines of 30-331 m). The interferometric visibilities were corrected for the flux contribution of stellar companions in those cases where the Be star is a member of a known binary or multiple system. For those targets with good (u, v) coverage, we used a four-parameter Gaussian elliptical disk model to fit the visibilities and to determine the axial ratio, position angle, K-band photospheric flux contribution, and angular diameter of the disk's major axis. For the other targets with relatively limited (u, v) coverage, we constrained the axial ratio, inclination angle, and/or disk position angle where necessary in order to resolve the degeneracy between possible model solutions. We also made fits of the ultraviolet and infrared spectral energy distributions (SEDs) to estimate the stellar angular diameter and infrared flux excess of each target. The mean ratio of the disk diameter (measured in K-band emission) to stellar diameter (from SED modeling) is 4.4 among the 14 cases where we reliably resolved the disk emission, a value which is generally lower than the disk size ratio measured in the higher opacity H{alpha} emission line. We estimated the equatorial rotational velocity from the projected rotational velocity and disk inclination for 12 stars, and most of these stars rotate close to or at the critical rotational velocity.