Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Photocatalytic activities of hydrothermally synthesized In(OH){sub 3} and In{sub 2}O{sub 3} nanocubes

Graphical abstract: In(OH){sub 3} and In{sub 2}O{sub 3} nanocubes were synthesized via hydrothermal method. Their photocatalytic activities were studied according to the degradation of crystal violet aqueous solution under UV irradiation. The as-prepared In{sub 2}O{sub 3} nanocubes show more extremely photocatalytic activity than In(OH){sub 3} nanocubes which is possibly due to forming a larger surface area and more defects on the surface of In{sub 2}O{sub 3} nanocubes during heat treatment of In(OH){sub 3}. Display Omitted Highlights: ► In(OH){sub 3} and In{sub 2}O{sub 3} nanocubes were synthesized via hydrothermal method. ► The In{sub 2}O{sub 3} nanocubes show more extremely photocatalytic activity than In(OH){sub 3} nanocubes. ► The photocatalytic mechanism is explained. -- Abstract: Indium oxide [In{sub 2}O{sub 3}] nanocubes were obtained through thermal treatment of the hydrothermally synthesized indium hydroxide [In(OH){sub 3}] nanocubes. The photocatalytic activities of In(OH){sub 3} and In{sub 2}O{sub 3} nanocubes have been evaluated by the degradation of crystal violet in an aqueous solution. The degradation rate of crystal violet under UV irradiation in In{sub 2}O{sub 3} containing aqueous is much higher than that in In(OH){sub 3} aqueous, which may be attributed to the formation of more defects as well as more active sites for interactions after thermal treatment of In(OH){sub 3}.

36 MATERIALS SCIENCE↗

Room-temperature ferromagnetism of Fe-doped TiO{sub 2} nanoparticles driven by oxygen vacancy

Graphical abstract: A series of Ti{sub 1−x}Fe{sub x}O{sub 2−δ} (x ≤ 0.03) nanoparticles (NPs) were synthesized by sol–gel route. The room temperature ferromagnetism (RTFM) has been explained in terms of vacancy induced bound magnetic polaron (BMP) model, where the Fe{sup 3+} ions ferromagnetically coupled mediated by oxygen vacancies. Display Omitted Highlights: ► The Fe-doped NPs have been synthesized by sol–gel method. ► Ferromagnetism of Fe-doped TiO{sub 2} NPs are intrinsic property. ► Room temperature ferromagnetism observed in all the Fe-doped samples. ► Variation in M{sub s} is attributed due to oxygen vacancies and defect formation. -- Abstract: A series of Ti{sub 1−x}Fe{sub x}O{sub 2−δ} (0 ≤ x ≤ 0.03) nanoparticles (NPs) were synthesized by sol–gel route. The NPs had a size distribution in the range of 15–40 nm and were identified as the anatase TiO{sub 2} by X-ray diffraction (XRD) and Raman analysis. XRD, selected area electron diffraction, Raman and Mössbauer analysis ruled out the signature of Fe-cluster or any other oxides of Fe. The redshifting of the band edge emission peak observed in UV–vis absorption studies further confirmed the doping of Fe ions in the TiO{sub 2} lattice. Raman studies show the shifting and broadening in E{sub g}(1) and E{sub g}(3) modes with Fe doping. It suggested that the activation of ferromagnetism with increasing Fe doping concentration was related to the oxygen vacancy defects. The presence of such defects was further confirmed from electron paramagnetic resonance (EPR) measurements. The observed ferromagnetism is interpreted in terms of bound magnetic polaron (BMP) model.

36 MATERIALS SCIENCE↗

Synthesis, structural, magnetic and electrical properties of Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0.0, 0.2) nanoparticles

Graphical abstract: The variations of imaginary part of dielectric permittivity (ε″) of TEG@Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} nanocomposite as a function of temperature and frequency for (A) x = 0.0 and (B) x = 0.2. Display Omitted Highlights: ► Nearly monodisperse Zn{sub x}Co{sub 1−x}Fe{sub 2}O{sub 4} nanocomposite were prepared via hydrothermal method. ► The ac conductivity showed a temperature dependent behavior at low frequencies. ► dc conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle are found to obey the Arrhenius plot. ► Also these materials may be used in electronic devices and microwave devices. -- Abstract: Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} spinel nanoparticles with Zn concentrations of x = 0.0, 0.2 were prepared by a hydrothermal route in the presence of triethylene glycol (TEG). The structural, magnetic, electrical and dielectric properties of the prepared nanoparticles were studied. The XRD results confirmed the formation of single spinel ferrite structure with crystallite size 9 and 10 nm for x = 0.0 and 0.2 compositions respectively. The lattice parameter (a) increased with increasing Zn concentration. Temperature and frequency dependent electrical and dielectric properties of the prepared ferrites have also been investigated. Our findings show that overall conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle is lower than that of CoFe{sub 2}O{sub 4} and roughly in the range of 10{sup −11}–10{sup −7} S cm{sup −1} depending strongly temperature and frequency owing to the formation of stable electric bonds between the Zn{sup 2+} and Fe{sup 2+} ions, which localizes Fe{sup 2+} charge carriers. The ac conductivity showed a temperature dependent behavior at low frequencies and temperature independent behavior at high frequencies, which is an indication of ionic conductivity. dc conductivity of Co{sub 0.8}Zn{sub 0.2}Fe{sub 2}O{sub 4} nanoparticle are found to obey the Arrhenius plot and can be classified into two regions over with activation energy of 0.113 and 0.163 eV in the ranges of 20–40 °C and 70–120 °C, respectively when CoFe{sub 2}O{sub 4} has an activation energy of 0.245 eV.

36 MATERIALS SCIENCE↗

Optical and electrochemical studies of polyaniline/SnO{sub 2} fibrous nanocomposites

Graphical abstract: Fiber with porous like structure of PANI/SnO{sub 2} nanocomposites were prepared by simplest in situ chemical polymerization method. The PL emission spectra revealed that the band from 404 and 436 nm which is related with oxygen vacancies. The excellent electrochemical properties of composite electrode show the specific capacitance of 173 F/g at a scan rate of 25 m V/s. Display Omitted Highlights: ► Self assembled PANI/SnO{sub 2} nanocomposites were synthesized by simple polymerization method. ► Electrochemical behavior of PANI/SnO{sub 2} nanocomposites electrode was analyzed by CV. ► Nanocomposites exhibit a higher specific capacitance of 173 F/g, compared with pure SnO{sub 2}. -- Abstract: Polyaniline (PANI)/tin oxide (SnO{sub 2}) fibrous nanocomposites were successfully prepared by an in situ chemical polymerization method with suitable conditions. The obtained composites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, photoluminescence (PL), electrical conductivity and cyclic voltammetry studies (CV). The XRD pattern of the as-prepared sample shows the presence of tetragonal SnO{sub 2} and the crystalline structure of SnO{sub 2} was not affected with the incorporation of PANI. The FTIR analysis confirms the uniform attachment of PANI on the surface of SnO{sub 2} nanostructures. SEM images show a fibrous agglomerated structure of PANI/SnO{sub 2}. The PL emission spectra revealed that the band from 404 and 436 nm which is related with oxygen vacancies. The electrochemical behavior of the PANI/SnO{sub 2} composite electrode was evaluated in a H{sub 2}SO{sub 4} solution using cyclic voltammetry. The composite electrode exhibited a specific capacitance of 173 F/g at a scan rate 25 mV/s. Thus the as-prepared PANI/SnO{sub 2} composite shows excellent electrochemical properties, suggesting that this composite is a promising material for supercapacitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Corrosion inhibitor storage and release property of TiO{sub 2} nanotube powder synthesized by rapid breakdown anodization method

Graphical abstract: Display Omitted Highlights: ► TiO{sub 2} nanotube powders were synthesized by rapid breakdown anodization method. ► Benzotriazole was loaded into the TiO{sub 2} nanotube powders. ► Low pH induced release of benzotriazole from TiO{sub 2} nanotube powders was proved. -- Abstract: Titanium dioxide (TiO{sub 2}) is one of the most studied substances in material science due to its versatile properties and diverse applications. In this study titanium dioxide nanotube powder were synthesized by rapid breakdown anodization (RBA) method. The synthesis involved potentiostatic anodization of titanium foil in 0.1 M HClO{sub 4} electrolyte under an applied voltage of 20 V and rapid stirring. The morphology and the phase of titanium dioxide nanotube powder were studied using field emission scanning electron microscopy, laser Raman spectroscopy and high resolution transmission electron microscopy. Benzotriazole was chosen as model inhibitor to evaluate TiO{sub 2} nanotube powder's corrosion inhibitor loading and releasing properties. The storage and release properties of TiO{sub 2} nanotube powder were studied using UV–visible spectroscopy and thermogravimetric analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Green synthesis of silver nanoparticles from aqueous Aegle marmelos leaf extract

Graphical abstract: Silver nanoparticles capped with polyphenols present in Aegle marmelos leaf extract. Display Omitted Highlights: ► Silver nanoparticles are synthesized using Aegle marmelos leaf extract in aqueous media. ► Reduction reaction is fast and occurs at room temperature. ► The presence of polyphenols acts as in situ capping agent. -- Abstract: Synthesis of nanoparticles by green route is an emerging technique drawing more attention recently because of several advantages over the convention chemical routes. The present study reports one-pot synthesis and in situ stabilization of silver nanoparticles using Aegle marmelos leaf extract. Nanoparticles of almost uniform spherical size (∼60 nm) were synthesized within ∼25 min reaction time at room temperature. The size of particles depends on the ratio of AgNO{sub 3} and leaf extract. The crystallinity, size, and shape of the nanoparticles were characterized by X-ray diffraction, dynamic light scattering, and scanning electron microscopy respectively. The size stability was attained by the capping effect of polyphenolic tannin compound, procatacheuate in the extract. The capped polyphenols can be removed from the particle surface by simple NaOH/methanol wash. The involvement of phenolic compounds in metal ion reduction and capping were supported by UV–visible spectroscopy, infrared spectroscopy, high performance liquid chromatography, and zeta potential measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influences of air calcination and steam activation on microstructure and photocatalytic activity of continuous TiO{sub 2} fibers

Graphical abstract: Display Omitted Highlights: ► Effects of air calcination and steam activation on TiO{sub 2} fibers were studied. ► The photocatalytic activity was evaluated by degradation of formaldehyde. ► Steam activation promoted the anatase–rutile phase transformation. ► Steam activation decreased grain size and increased special surface area. ► Steam activation improved photocatalytic activity of TiO{sub 2} fibers. -- Abstract: Effects of air calcination and steam activation, on phase transformation, microstructure and photocatalytic activity of continuous TiO{sub 2} fibers prepared by sol–gel method were studied. The fibers were characterized by XRD, SEM, and N{sub 2} adsorption–desorption. The photocatalytic activity was evaluated by photocatalytic degradation of formaldehyde. Results showed that 100% rutile fibers heat-treated in air and steam were obtained at 800 °C and 600 °C, respectively. The anatase grain sizes and special surface areas of the fibers heat-treated at 500 °C in air and steam were 31.6 nm, 22.7 nm, 26.7 m{sup 2}/g and 32.3 m{sup 2}/g, respectively. The degradation rates of formaldehyde over the fibers heat-treated at 500 °C in air and steam were 92.3% and 98.6% after 14 h under UV irradiation, respectively. Compared with the air calcination, the steam activation promoted the anatase–rutile phase transformation, reduced the grain size, increased the special surface area, and improved photocatalytic activity of continuous TiO{sub 2} fibers.

36 MATERIALS SCIENCE↗

[Bmim][TfO] ionic liquid-assisted oriented growth of Co{sub 3}O{sub 4} nanoworms

Graphical abstract: Display Omitted Highlights: ► First time, we have used [Bmim][TfO]IL for the synthesis of Co{sub 3}O{sub 4} nanoworms. ► IL assists to form oriented growth of cubic Co{sub 3}O{sub 4} nanoworms without intermediate. ► Cubic Co{sub 3}O{sub 4} nanoworms are in the range of 20 nm width and 100–200 nm length. ► IL and oxidizing agent have not altered the Co{sub 3}O{sub 4} structural characteristics. ► Co{sub 3}O{sub 4} nanoworms exhibit crystalline domain dependent weak ferromagnetism. -- Abstract: Monodispersed worm-like structure of Co{sub 3}O{sub 4} nanocrystals of 20 nm width and 100–200 nm length are prepared directly without any intermediate product by 1-n-butyl-3-methylimidazolium trifluoromethane sulfonate ionic liquid ([Bmim][TfO] IL) assisted precipitation method. The higher concentration of [Bmim][TfO] IL in the reaction medium leads to the formation of homogeneous nanoworms. The effect of synthesis temperature and the oxidizing agent (H{sub 2}O{sub 2}) on the Co{sub 3}O{sub 4} particle's morphology and their magnetic properties are discussed. Thermogravimetric analysis (TGA), powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) analysis were used to characterize the Co{sub 3}O{sub 4} monodispersed nanoworms. The magnetic property of the spinel Co{sub 3}O{sub 4} nanoworms is highly dependent on crystalline domains and exhibits weak ferromagnetic behavior with a narrow hysteresis loop opening.

36 MATERIALS SCIENCE↗

Structure and luminescence properties of thermally nitrided Ga{sub 2}O{sub 3} nanowires

Graphical abstract: The as-synthesized Ga{sub 2}O{sub 3} nanowires exhibited a broad emission band at approximately 570 nm in the green region. In contrast, the thermally nitrided Ga{sub 2}O{sub 3} nanowires exhibited a much stronger emission band at approximately 455 nm in the blue region. Display Omitted Highlights: ► The structure and luminescence properties of thermally nitrided Ga{sub 2}O{sub 3} nanowires were examined. ► A uniform GaN shell layer was formed on the surface of the nanowires by thermal nitridation. ► The as-synthesized Ga{sub 2}O{sub 3} nanowires exhibited a broad yellow emission. ► The nitrided Ga{sub 2}O{sub 3} nanowires exhibited a much stronger blue emission band due to the GaN shell layer. -- Abstract: The structure and luminescence properties of thermally nitrided Ga{sub 2}O{sub 3} nanowires were examined. Transmission electron microscopy and X-ray diffraction confirmed the formation of a uniform GaN shell layer on the surface of the nanowires by thermal nitridation. The core and shell of the nitrided nanowires were monoclinic-structured single crystal Ga{sub 2}O{sub 3} and wurtzite-type hexagonal close-packed-structured single crystal GaN, respectively. The as-synthesized Ga{sub 2}O{sub 3} nanowires exhibited a broad emission band at approximately 570 nm in the yellow region. In contrast, the nitrided Ga{sub 2}O{sub 3} nanowires exhibited a much stronger emission band at approximately 455 nm in the blue region, which must originate from the newly formed GaN shell layer.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic property of BaTi{sub 4}O{sub 9}/RuO{sub 2} nanocomposites

Graphical abstract: The photocatalytic property of the BaTi{sub 4}O{sub 9} nanobelts and bulk samples for overall water splitting into H{sub 2} and O{sub 2} under ultraviolet light irradiation. Display Omitted Highlights: ► 1D semiconductor photocatalysts have merited special attention. ► The nanocomposites of BaTi{sub 4}O{sub 9} nanobelts combined with RuO{sub 2} have been synthesized. ► BaTi{sub 4}O{sub 9}/RuO{sub 2} does not exhibit higher photocatalytic activity than the bulk. ► Photocatalytic efficiency of BaTi{sub 4}O{sub 9}/RuO{sub 2} can be significantly affected by the defects. -- Abstract: Photocatalytic BaTi{sub 4}O{sub 9}/RuO{sub 2} nanocomposites have been prepared by a solution-based impregnation method for overall water splitting into H{sub 2} and O{sub 2} under ultraviolet light irradiation. Although the specific surface area of BaTi{sub 4}O{sub 9} nanobelts is far larger than that of the counterpart bulk, the nanobelts do not exhibit a much higher photocatalytic activity than the corresponding bulk. Our results suggest that the photocatalytic efficiency of nanocrystals can be significantly affected by the defects, which may further indicate the benefit from the size reduction can be canceled by a higher electron-hole recombination rate due to the defects. Furthermore, the absence of reactive facets in BaTi{sub 4}O{sub 9} nanobelts may be another reason leading to the decrease of photocatalytic efficiency of nanocrystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and electrochemical properties of polyaniline/MoO{sub 3} nanobelt composite for lithium battery

Graphical abstract: Hydrothermal method was introduced for the synthesis of MoO{sub 3} nanobelts and polyaniline (PANI)/MoO{sub 3} nanobelt composites. The structure and morphology of the samples were studied by X-ray diffraction (XRD), Fourier transform infrared radiation (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. We can see the presence of polyaniline on the MoO{sub 3} nanobelts surface in the TEM pictures as shown in Fig. (a). The pure MoO{sub 3} nanobelts exhibit the initial specific capacity 276 mAhg{sup −1}, whereas PANI/MoO{sub 3} nanobelt composite shows little low initially 228 mAhg{sup −1} after that it has more stabilized specific capacity with increasing cycle numbers as shown in Fig. (b). The cyclic voltammograms of the PANI/MoO{sub 3} nanobelt composite show better cyclic performance compared to pure MoO{sub 3} nanobelts. The electrochemical impedance spectres were studied for both the pure and PANI/MoO{sub 3} samples at 2.0 and 3.5 potentials. The role of the PANI polymeric component of the composite material seems to be the stabilization of the specific capacity due to probable homogeneous distribution of the induced stress during cycling. Display Omitted Highlights: ► Hydrothermal synthesis of MoO{sub 3}, PANI/MoO{sub 3} nanobelts. ► Samples were characterised by XRD, FTIR, DSC, SEM, TEM, CV and impedance. ► MoO{sub 3} nanobelts cathode battery shows initial specific capacity 276 mAhg{sup −1}. ► PANI/MoO{sub 3} nanobelts show initial specific capacity 228 mAhg{sup −1} but high stability. ► PANI/MoO{sub 3} sample studies by impedance at the potentials of 2.0 and 3.5 V. -- Abstract: The MoO{sub 3} nanobelts and polyaniline (PANI)/MoO{sub 3} nanobelt composite were synthesized using hydrothermal method. The crystal structure and morphology of the samples were studied by X-ray diffraction (XRD), Fourier transform infrared radiation (FTIR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Differential scanning calorimetric (DSC) and thermo gravimetric (TG) measurements were carried out for PANI/MoO{sub 3} nanobelt composite. The pure MoO{sub 3} nanobelts exhibit the initial specific capacity 276 mAhg{sup −1}, whereas PANI/MoO{sub 3} nanobelt composite showed little low initially 228 mAhg{sup −1} after that it has more stabilized specific capacity with increasing cycle numbers at constant current density of 30.7 mAg{sup −1} in the potential range 1.0–4.0 V vs. Li/Li{sup +}. The electrochemical impedance profiles were also studied. The cyclic voltammograms of the PANI/MoO{sub 3} nanobelt composite showed better cyclic performance as compared with pure MoO{sub 3} nanobelts, this is due to the role of PANI polymeric component stabilization of the specific capacity by homogeneous distribution within nanobelts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoelectrochemical properties of electrostatically self-assembled multilayer films formed by three bipolar hemicyanines and H{sub 4}SiW{sub 12}O{sub 40}

Graphical abstract: Display Omitted Highlight: ► Three self-assembled films of hemicyanines of and H{sub 4}SiW{sub 12}O{sub 40}. ► Uniformly deposited multilayers with reversible electrochemical activity. ► Large cathodic photocurrent densities of 0.36–1.02 μA/cm{sup 2} with IPCE of 0.75–0.98%. -- Abstract: The electrostatically self-assembled multilayer films of three bipolar hemicyanines with varied alkyl chain lengths were prepared by alternating adsorption of H{sub 4}SiW{sub 12}O{sub 40} and these hemicyanines, and characterized by UV–vis absorption spectroscopy, X-ray photoelectron spectroscopy and cyclic voltammetry. The results showed that these inorganic–organic composite films were uniformly deposited with good electrochemical activity. Photoelectrochemical investigations showed that the films exhibited large cathodic photocurrent densities of 0.36–1.02 μA/cm{sup 2} with the monochromatic incident photon-to-electron conversion efficiency of 0.75–0.98% while irradiated with 100 mW/cm{sup 2} polychromatic light (730 nm > λ > 325 nm) at an applied potential of −0.2 V vs. saturated calomel electrode, being strongly dependent on the alkyl chain lengths.

36 MATERIALS SCIENCE↗

Visible-light-driven photocatalytic performance of nitrogen-doped Ti{sub 1−x}Zr{sub x}O{sub 2} solid solution

Graphical abstract: Display Omitted Highlights: ► Dual modifications on the energy band of TiO{sub 2} are achieved by N and Zr co-doping. ► Nitrogen and zirconium dopants have different doping positions in the catalyst. ► A synergic impact of nitrogen and zirconium on photocatalytic activity is observed. ► A mechanism for the high performance of nitrogen-doped Ti{sub 1−x}Zr{sub x}O{sub 2} solid solution is proposed. -- Abstract: Nitrogen-doped Ti{sub 1−x}Zr{sub x}O{sub 2} solid solutions have been synthesized by a multi-step sol–gel process followed by hydrothermal treatment in ammonia solution. XRD, XPS and UV–vis diffuse reflectance analyses indicated that nitrogen was doped in the surface layer of catalyst, introducing surface states located close to valence band. However, Zr{sup 4+} was successfully incorporated into the bulk lattice of TiO{sub 2} so as to induce the up-shift of conduction band. Compared to pristine TiO{sub 2} and nitrogen-doped TiO{sub 2}, nitrogen-doped Ti{sub 1−x}Zr{sub x}O{sub 2} exhibited much higher efficiency for the degradation of Acid Red 88 solution and gaseous benzene under visible light irradiation, attributed to the synergetic effect of nitrogen and zirconium on the energy band. Specifically, the presence of surface states in the band gap enabled the extended visible light response and the up-shift of conduction band facilitated the excited electron interfacial transfer and hence suppressed efficiently the recombination of charge carriers.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and electrical properties of NaNbO{sub 3}

Graphical abstract: Display Omitted Highlights: ► Crystalline rhombohedral sodium niobate (r-NaNbO{sub 3}) were synthesized. ► Conductivity goes from 5.5 × 10{sup −6} Ω{sup −1} cm{sup −1} at 280 °C to 7.61 × 10{sup −4} Ω{sup −1} cm{sup −1} at 780 °C. ► Activation energies are in the order of 0.893, 0.507, 0.819 and 0.105 eV. -- Abstract: Triangular prism-like of crystalline rhombohedral sodium niobate (r-NaNbO{sub 3}) were prepared from Nb{sub 2}O{sub 5} in the presence of NaOH via a hydrothermal method at 180 °C for 6 h. Techniques X-ray diffraction, scanning electron microscopy, Fourier transform infrared, Raman and impedance spectroscopy have been used to characterize the structure, morphology, composition and electrical properties of the material. Electrical conductivity measurements showed that the as synthesized r-NaNbO{sub 3} triangular prism has a conductivity value which goes from 5.5 × 10{sup −6} Ω{sup −1} cm{sup −1} at 280 °C to 7.61 × 10{sup −4} Ω{sup −1} cm{sup −1} at 780 °C. The Arrhenius diagram is not linear; it presents four regions of conductivity. The corresponding activation energies are, respectively, in the order of 0.893, 0.507, 0.819 and 0.105 eV, deduced from the Arrhenius relation.

36 MATERIALS SCIENCE↗

Blue light emitting SrSn(OH){sub 6} nano-rods doped with lanthanide ions (Eu{sup 3+}, Tb{sup 3+} and Dy{sup 3+})

Graphical abstract: Display Omitted Highlights: ► Room temperature synthesis of blue light emitting SrSn(OH){sub 6} nano-rods. ► Blue light emission originates from the recombination of self trapped excitons. ► There exists energy transfer from host to lanthanide ions in SrSn(OH){sub 6}:Ln nano-rods. ► Solubility of Eu{sup 3+} ions in SrSn(OH){sub 6} nano-rods is around 1.5 at%. -- Abstract: Blue light emitting SrSn(OH){sub 6} nano-rods were prepared in aqueous medium at room temperature. Presence of lanthanide ions in reaction medium during synthesis of nano-rods, leads to significant changes in the morphology of the nano-rods. Based on luminescence studies emission in the blue region from SrSn(OH){sub 6} nano-rods has been attributed to radiative recombination of self trapped excitons in the lattice. SrSn(OH){sub 6} nano-rods were doped with lanthanide ions like Eu{sup 3+}, Tb{sup 3+} and Dy{sup 3+} and their luminescence studies revealed that there exists energy transfer from host to lanthanide ions. From the luminescence studies on Eu{sup 3+} doped samples, it is confirmed that up to 1.5 at%, Eu{sup 3+} ions get incorporated at Sr{sup 2+} site in SrSn(OH){sub 6} lattice and beyond which a separate Eu{sup 3+} containing phase is formed. Part of the europium ions also exists as Eu{sup 2+} species in the lattice as confirmed by electron paramagnetic resonance (EPR) studies.

36 MATERIALS SCIENCE↗

Solvothermal synthesis of graphene-Sb{sub 2}S{sub 3} composite and the degradation activity under visible light

Graphical abstract: Display Omitted Highlights: ► Graphene-Sb{sub 2}S{sub 3} composites were synthesized through a facile solvothermal method. ► Hydroxyl radicals are the main species responsible for the photodegradation activity. ► Graphene-Sb{sub 2}S{sub 3} demonstrated dramatically improved visible light degradation activity. -- Abstract: Novel graphene-Sb{sub 2}S{sub 3} (G-Sb{sub 2}S{sub 3}) composites were synthesized via a facile solvothermal method with graphene oxide (GO), SbCl{sub 3} and thiourea as the reactants. GO played an important role in controlling the size and the distribution of the formed Sb{sub 2}S{sub 3} nanoparticles on the graphene sheets with different density. Due to the negative surface charge, smaller Sb{sub 2}S{sub 3} particles size and efficient electrons transfer from Sb{sub 2}S{sub 3} to graphene, the composites demonstrated improved photodegradation activity on rhodamine B (RhB). Among these composites, the product G-Sb{sub 2}S{sub 3} 0.1, which was synthesized with the GO concentration of 0.1 mg/mL, exhibited the highest photodegradation activity owing to the considerable density of Sb{sub 2}S{sub 3} nanoparticles onto graphene sheet free of aggregation. Hydroxyl radicals (·OH) derived from conduction band (CB) electrons of Sb{sub 2}S{sub 3} is suggested to be responsible for the photodegradation of RhB. The high visible light degradation activity and the satisfactory cycling stability made the as-prepared G-Sb{sub 2}S{sub 3} 0.1 an applicable photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of annealing temperature on the supercapacitor behaviour of β-V{sub 2}O{sub 5} thin films

Graphical abstract: Display Omitted Highlights: ► Structural, optical, supercapacitor properties of β-V{sub 2}O{sub 5} thin films are reported. ► Influence of annealing temperature on β-V{sub 2}O{sub 5} thin films have been studied. ► Film annealed at 300 °C exhibit lower charge transfer resistance. -- Abstract: Vanadium pentoxide thin films are prepared via sol–gel spin coating method. The films coated on FTO and glass substrates are treated at different temperatures ranging from 250 °C to 400 °C. The structural, optical and electrochemical investigations are made. X-ray diffraction analysis shows the film to be composed of V{sub 2}O{sub 5} in β-phase up to annealing temperature of 350 °C and at 400 °C the structural transformation to α-phase is observed. FTIR spectrum shows the formation of V-O bond. The SEM images reveal the formation of nanopores. Optical absorption studies indicate a band gap of 2.2–2.4 eV. The supercapacitor behaviour is studied using cyclic voltammetery technique and electrochemical impedance analysis. The vanadium pentoxide films annealed at 300 °C for an hour exhibits a maximum specific capacitance of 346 F g{sup −1} at a scan rate of 5 mV s{sup −1}.

36 MATERIALS SCIENCE↗

Highly sensitive humidity sensing properties of carbon quantum dots films

Graphical abstract: Display Omitted Highlights: ► A humidity sensing device was fabricated based on carbon quantum dots (CQDs) films. ► The conductivity of the CQDs films shows a linear and rapid response to atmosphere humidity. ► The humidity sensing property was due to the hydrogen bonds between the functional groups on CQDs. -- Abstract: We reported the fabrication of a humidity sensing device based on carbon quantum dots (CQDs) film. The conductivity of the CQDs film has a linear and rapid response to relative humidity, providing the opportunity for the fabrication of humidity sensing devices. The mechanism of our humidity sensor was proposed to be the formation of hydrogen bonds between carbon quantum dots and water molecules in the humidity environment, which significantly promote the electrons migration. In a control experiment, this hypothesis was confirmed by comparing the humidity sensitivity of candle soot (i.e. carbon nanoparticles) with and without oxygen containing groups on the surfaces.

36 MATERIALS SCIENCE↗