Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Sample Dependence of Magnetism in the Next-Generation Cathode Material LiNi 0.8 Mn 0.1 Co 0.1 O 2

We present a structural and magnetic study of two batches of polycrystalline LiNi 0.8 Mn 0.1 Co 0.1 O 2 (commonly known as Li NMC 811), a Ni-rich Li ion battery cathode material, using elemental analysis, X-ray and neutron diffraction, magnetometry, and polarized neutron scattering measurements. We find that the samples, labeled S1 and S2, have the composition Li 1–x Ni 0.9+x–y Mn y Co 0.1 O 2 , with x = 0.025(2), y = 0.120(2) for S1 and x = 0.002(2), y = 0.094(2) for S2, corresponding to different concentrations of magnetic ions and excess Ni 2+ in the Li + layers. Both samples show a peak in the zero-field-cooled (ZFC) dc susceptibility at 8.0(2) K, but the temperature at which the ZFC and FC (field-cooled) curves deviate is substantially different: 64(2) K for S1 and 122(2) K for S2. The ac susceptibility measurements show that the transition for S1 shifts with frequency whereas no such shift is observed for S2 within the resolution of our measurements. Our results demonstrate the sample dependence of magnetic properties in Li NMC 811, consistent with previous reports on the parent material LiNiO 2 . Here, we further establish that a combination of experimental techniques is necessary to accurately determine the chemical composition of next-generation battery materials with multiple cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plastic and low-cost axial zero thermal expansion alloy by a natural dual-phase composite

Zero thermal expansion (ZTE) alloys possess unique dimensional stability, high thermal and electrical conductivities. Their practical application under heat and stress is however limited by their inherent brittleness because ZTE and plasticity are generally exclusive in a single-phase material. Besides, the performance of ZTE alloys is highly sensitive to change of compositions, so conventional synthesis methods such as alloying or the design of multiphase to improve its thermal and mechanical properties are usually inapplicable. In this study, by adopting a one-step eutectic reaction method, we overcome this challenge. A natural dual-phase composite with ZTE and plasticity was synthesized by melting 4 atom% holmium with pure iron. The dual-phase alloy shows moderate plasticity and strength, axial zero thermal expansion, and stable thermal cycling performance as well as low cost. By using synchrotron X-ray diffraction, in-situ neutron diffraction and microscopy, the critical mechanism of dual-phase synergy on both thermal expansion regulation and mechanical property enhancement is revealed. These results demonstrate that eutectic reaction is likely to be a universal and effective method for the design of high-performance intermetallic-compound-based ZTE alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic structure at low temperatures in FeGe{sub 2}

Magnetic phase of FeGe{sub 2} intermetallic is studied using low-temperature neutron diffraction and DC magnetization. Zero-magnetic-field neutron scattering data shows the presence of an antiferromagnetic phase in the low temperature range. We find the evidence of the presence of a ferromagnetic order overriding on the predominantly antiferromagnetic phase at low temperatures.

36 MATERIALS SCIENCE↗

Neutron scattering study of tantalum dihydride

A single-phase sample of Ta H 2.2 ( 1 ) with a hexagonal close-packed metal lattice (hcp; space group P 6 3 / m m c ) was synthesized under a hydrogen pressure of 9 GPa and a temperature of 100 °C; quenched to the liquid nitrogen temperature; recovered to ambient pressure and studied by neutron diffraction (ND) and inelastic neutron scattering (INS). The ND study showed that hydrogen atoms occupied one half of the tetrahedral (T) and all octahedral (O) interstitial sites in the hcp lattice of Ta atoms. The arrangement of the H atoms over the T sites was proven to be ordered, which lowered the symmetry of the full crystal structure of the dihydride to P 6 3 m c . Due to the resulting asymmetry in the local environment of the O sites, the H atoms were considerably displaced from the centers of these sites along the z axis, away from the H atoms occupying the neighboring T sites. The INS study demonstrated that the potential wells for H atoms at both the T and O sites are highly anharmonic and anisotropic. Thus it is shown that the potential wells at the O sites are softer along the z axis than in the x , y plane, while the T sites show opposite anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of interstitial Mn on magnetism in the room-temperature ferromagnet Mn 1 + δ Sb

We report elastic and inelastic neutron scattering measurements of the high-TC ferromagnet Mn 1 + δ Sb . Measurements were performed on a large, T C = 434 K, single crystal with interstitial Mn content of δ ≈ 0.13. The neutron diffraction results reveal that the interstitial Mn has a magnetic moment, and that it is aligned antiparallel to the main Mn moment. We perform density functional theory calculations including the interstitial Mn, and find the interstitial to be magnetic in agreement with the diffraction data. The inelastic neutron scattering measurements reveal two features in the magnetic dynamics: i) a spin-wave-like dispersion emanating from ferromagnetic Bragg positions (H K 2n), and ii) a broad, non-dispersive signal centered at forbidden Bragg positions (H K 2n+1). The inelastic spectrum cannot be modeled by simple linear spin-wave theory calculations, and appears to be significantly altered by the presence of the interstitial Mn ions. Finally, the results show that the influence of the interstitial Mn on the magnetic state in this system is more important than previously understood.

36 MATERIALS SCIENCE↗

Magnetic structure of the quasi-one-dimensional L a 3 Os O 7 as determined by neutron powder diffraction

Insulating 5d 3 La 3 OsO 7 and the isostructural hole-doped analog La 2.8 Ca 0.2 OsO 7 that feature pseudo-one-dimensional zigzag chains of corner-sharing OsO 6 octahedra were synthesized and their magnetic and electrical transport properties characterized. Both of these compounds are insulating antiferromagnets. Moreover, for long range magnetic order between the antiferromagnetic chains we determined with a propagation vector k = 1/2,1/2,1 and T N = 45 and 33 K the parent and doped materials. An Os 5+ moment of 1.7(1)μ B for La 3 OsO 7 and 1.2(2)μ B for La 2.8 Ca 0.2 OsO 7 is refined. The long range magnetic structure is compared to the isostructural compounds La 3 RuO 7 and La 3 MoO 7 , both of which adopt different magnetic structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From Rate Measurements to Mechanistic Data for Condensed Matter Reactions: A Case Study Using the Crystallization of [Zn(OH 2 ) 6 ][ZnCl 4 ]

The kinetics of crystallization of the R = 3 hydrate of zinc chloride, [Zn(OH 2 ) 6 ][ZnCl 4 ], is measured by time-resolved synchrotron x-ray diffraction, time-resolved neutron diffraction, and by differential scanning calorimetry. It is shown that analysis of the rate data using the classic Kolmogorov, Johnson, Mehl, Avrami (KJMA) kinetic model affords radically different rate constants for equivalent reaction conditions. Reintroducing the amount of sample measured by each method into the kinetic model, using our recently developed modified-KJMA model (M-KJMA), it is shown that each of these diverse rate measurement techniques can give the intrinsic, material specific rate constant, the velocity of the phase boundary, v pb . These data are then compared to the velocity of the crystallization front directly measured optically. The time-resolved diffraction methods uniquely monitor the loss of the liquid reactant and formation of the crystalline product demonstrating that the crystallization of this hydrate phase proceeds through no intermediate phases. The temperature dependent v pb data are then well fit to transition zone theory to extract activation parameters. These demonstrate that the rate-limiting component to this crystallization reaction is the ordering of the waters (or protons) of hydration into restricted positions of the crystalline lattice resulting in large negative entropy of activation.

36 MATERIALS SCIENCE↗

Technical Report: Understanding Functional Lyotropic Liquid Crystal Network Phase Self-Assembly and the Properties of Nanoconfined Water

Through the synergistic interplay of molecular dynamics (MD) simulations, chemical synthesis, and materials characterization by X-ray and neutron scattering techniques, this project investigated the phase behaviors of new classes of aqueous lyotropic liquid crystals (LLCs) and the properties of water nanoconfined within their pores. A portion of our studies focused on the synthesis of new classes of alkylsulfonic acid and alkylphosphonate amphiphiles, which were shown to undergo water-induced self-assembly to form a wide variety of nanostructured morphologies with unusually high degrees of long-range translational order observed by small- angle X-ray scattering (SAXS). Sample LLC morphologies that were observed include the lamellar (L!), tricontinuous double gyroid (G), hexagonally-packed cylinders (H), and low symmetry discontinuous micellar (I) Frank-Kasper phases. Since the G and H phases are the most promising for the development of selective ion transporting membranes for energy applications, we sought the characterize the structure and dynamics of water confined within the sub-3 nm pores of these LLCs using wide-angle neutron diffraction (WAND) and quasielastic neutron scattering (QENS) experiments performed at the Spallation Neutron Source at Oak Ridge National Laboratory. Using molecular dynamics (MD) simulations, we validated models for analyzing this QENS data to obtain water self-diffusion coefficients in LLC G and H phases of carboxylate and sulfonate surfactant LLCs as a function of the identities of their charge compensating counterions.

07 ISOTOPE AND RADIATION SOURCES↗

Nanosized helical magnetic domains in strongly frustrated Fe 3 PO 4 O 3

Fe 3 PO 4 O 3 forms a noncentrosymmetric lattice structure (space group R3m) comprising triangular motifs of Fe 3+ coupled by strong antiferromagnetic interactions ( | Θ CW | > 900 K). Neutron diffraction from polycrystalline samples shows that strong frustration eventually gives way to an ordered helical incommensurate structure below T N =163 K, with the helical axis in the hexagonal ab plane and a modulation length to ~86 Å. The magnetic structure consists of an unusual needlelike correlation volume that extends past 900 Å along the hexagonal c axis but is limited to ~70 Å in the a b plane, despite the three-dimensional nature of the magnetic sublattice topology. The small in-plane correlation length, which persists to at least T = T N /40 , indicates a robust blocking of long-range order of the helical magnetic structure, and therefore stable domain walls, or other defect spin textures, must be abundant in Fe 3 PO 4 O 3 . Temperature-dependent neutron powder diffraction reveals small negative thermal expansion below T N . No change in lattice symmetry is observed on cooling through T N , as revealed by high-resolution synchrotron x-ray diffraction. The previously reported reduced moment of the Fe 3+ ions (S = 5/2), μ ~ 4.2 μ B , is confirmed here through magnetization studies of a magnetically diluted solid solution series of compounds, Fe (3–x) Ga x PO 4 O 3 , and is consistent with the refined magnetic moment from neutron diffraction 4.14(2) μ B . Here, we attribute the reduced moment to a modified spin density distribution arising from ligand charge transfer in this insulating oxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallographic texture gradient along the wall thickness of an SF-copper tube

Metallic tubes usually show heterogeneities along circumference and through wall thickness. Local texture analysis by synchrotron diffraction and global texture analysis by neutron diffraction was used describing texture variations related to the wall thickness. Test sample was an SF-Cu tube with outer diameter of 140 mm and an average wall thickness of 10 mm. The texture is dominated by the cube component {001} <100>. Other minor components are rotated cube {013} <100>, Goss {011} <100>, Cu {112} <111>, brass {110} <112>, S {123} <634>. The texture gradient over the wall thickness shows a remarkable variation of the sharpness of the cube component. Other components show only little variation. Comparing samples obtained at maximum wall thickness and at minimum wall thickness one can see that the wall thickness has an influence on the global texture as well as texture gradient. Another interesting result is, that global textures measured directly by neutrons and averaged global textures, calculated from the set of local measurements by synchrotron diffraction, agree surprisingly well despite their different resolution.

36 MATERIALS SCIENCE↗

Dimethyl sulfoxide-induced dehydration of the intermembrane space of dipalmitoylphosphatidylcholine multilamellar vesicles: Neutron and synchrotron diffraction study

Small-angle neutron scattering spectra of a polydispersed population of dipalmitoylphosphatidylcholine (DPPC) unilamellar vesicles in heavy water in the presence of dimethyl sulfoxide (DMSO) are analyzed by means of the separated form-factor method. An increase in the mole fraction of DMSO in water from 0 to 15% was shown to lead to an increase in the thickness of the bilayer to the characteristics repeat distances of DPPC multilamellar membranes. This fact is indicative of dehydration of the intermembrane space and a steric contact between adjacent DPPC bilayers at 15% mole fraction of DMSO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Haldane topological spin-1 chains in a planar metal-organic framework

Haldane topological materials contain unique antiferromagnetic chains with symmetry-protected energy gaps. Such materials have potential applications in spintronics and future quantum computers. Haldane topological solids typically consist of spin-1 chains embedded in extended three-dimensional (3D) crystal structures. Here, we demonstrate that [Ni(μ-4,4'-bipyridine)(μ-oxalate)] n (NiBO) instead adopts a two-dimensional (2D) metal-organic framework (MOF) structure of Ni 2+ spin-1 chains weakly linked by 4,4'-bipyridine. NiBO exhibits Haldane topological properties with a gap between the singlet ground state and the triplet excited state. The latter is split by weak axial and rhombic anisotropies. Several experimental probes, including single-crystal X-ray diffraction, variable-temperature powder neutron diffraction (VT-PND), VT inelastic neutron scattering (VT-INS), DC susceptibility and specific heat measurements, high-field electron spin resonance, and unbiased quantum Monte Carlo simulations, provide a detailed, comprehensive characterization of NiBO. Vibrational (also known as phonon) properties of NiBO have been probed by INS and density-functional theory (DFT) calculations, indicating the absence of phonons near magnetic excitations in NiBO, suppressing spin-phonon coupling. The work here demonstrates that NiBO is indeed a rare 2D-MOF Haldane topological material.

36 MATERIALS SCIENCE↗

Anisotropic storage medium development in a full-scale, sodium alanate-based, hydrogen storage system

Deuterium desorption in an automotive-scale hydrogen storage tube was studied in-situ using neutron diffraction. Gradients in the concentration of the various alanate phases were observed along the length of the tube but no significant radial anisotropy was present. In addition, neutron radiography and computed tomography showed large scale cracks and density fluctuations, confirming the presence of these structures in an undisturbed storage system. These results demonstrate that large scale storage structures are not uniform even after many absorption/desorption cycles and that movement of gaseous hydrogen cannot be properly modeled by a simple porous bed model. In addition, the evidence indicates that there is slow transformation of species at one end of the tube indicating loss of catalyst functionality. These observations explain the unusually fast movement of hydrogen in a full scale system and shows that loss of capacity is not occurring uniformly in this type of hydrogen-storage system.

08 HYDROGEN↗

Structure and Properties Investigation of Mixed Oxides YCr{sub 1-x}Fe{sub x}O{sub 3}(0<=x<=1)

YCr{sub 1-x}Fe{sub x}O{sub 3} materials with x = 0; 0.125; 0.25; 0.33; 0.5; 0.67; 0.75; 0.875 and 1 have been prepared by solution combustion method followed by thermal treatment at 800 deg. C in air. X-ray powder diffraction spectra of samples confirmed the formation of solid solutions within the whole concentration interval. All spectra were successfully indexed in orthorhombic Pnma space group. Neutron diffraction measurements at room temperature have confirmed that some of the samples studied are antiferromagnetically ordered. This is consistent with the asymptotic Curie temperatures determined from the dependence of the reverse magnetic susceptibility on temperature. The effective magnetic moments were determined from the Rietveld refinement of the neutron powder diffraction data.

36 MATERIALS SCIENCE↗

The influence of alloy composition on residual stresses in heat treated aluminium alloys

The as quenched properties of eight different heat treatable aluminium alloys are related to residual stress magnitudes with the objective being to establish if there is a relationship between the residual stress and the as quenched alloy hardness and strength. Near surface residual stresses were assessed with X-ray diffraction using both the established sin{sup 2}ψ method and the more recent cos α technique. Through thickness residual stresses were also characterised using neutron diffraction. The alloys were chosen to encompass a wide range of strengths. The low to medium strength alloys were 6060 and 6082, medium to high strength 2618A, 2014A, 7075, 7010 and two variants of 7449, while the very high strength alloy was the powder metallurgy alloy N707. To assess the as quenched strength, dynamic hardness and tensile properties were determined from samples tested immediately after quenching to minimise the influence of precipitation hardening by natural aging. In addition, hot hardness measurements were made in situ on samples cooled to simulate quench paths. Within the experimental constraints of the investigation, the distribution of residual stress through the thickness was found to follow the same pattern for all the alloys investigated, varying from tensile in the interior to surface compression. The influence of alloy strength was manifested as a change in the observed residual stress magnitudes, and surface residual stresses were found to vary linearly with as quenched hardness and strength. - Highlights: • As quenched aluminium alloys contain high magnitude residual stresses. • Surface is compressive balance by a tensile core. • As quenched surface residual stress is linear function of alloy strength. • In situ hot hardness demonstrates rapid change in intrinsic hardness during rapid cooling.

36 MATERIALS SCIENCE↗

The ability of RP-type cobaltites to accommodate carbonate groups: A new layered oxide Sr{sub 4}Co{sub 2}(CO{sub 3})O{sub 5.86}

The possibility to introduce carbonate groups inside a pure cobalt based Ruddlesden Popper type matrix is demonstrated. This paper reports the synthesis as a single phase of a new layered oxycarbonate Sr{sub 4}Co{sub 2}(CO{sub 3})O{sub 5.86} and its structural characterizations at room temperature combining TEM observations and powder neutron diffraction data. Close structural relationships are observed with the homologous Sr{sub 4}Fe{sub 3-x}(CO{sub 3}){sub x}O{sub 10-4x} series and deal with the presence of two specific carbonate configurations, namely coat hanger and flag. Magnetization measurements reveal a complex antiferromagnetic behavior below 50 K with three others transitions, at 160, 210 and 250 K. Such behavior can be ascribed to the latent reactivity in air of this largely oxygen deficient phase. - Graphical abstract: Structural model of the Sr{sub 4}Co{sub 2}(CO{sub 3})O{sub 5.86} oxycarbonate. Highlights: > Partial substitution of CO groups for Co species is efficient to stabilize a new RP3 cobaltite. > HREM image combined with IR data and powder ND data confirm the structural model. > From ND data, Fourier difference analysis evidences two specific carbonate orientations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗