Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NaNO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Complete Strain Mapping of Nanosheets of Tantalum Disulfide

Quasi-two-dimensional (quasi-2D) materials hold promise for future electronics because of their unique band structuresthat result in electronic and mechanical properties sensitive to crystal strains in all three dimensions. Quantifying crystal strain is a prerequisite to correlating it with the performance of the device, and calls for high resolution but spatially resolved rapid characterization methods. Here we show that using fly-scan nano X-ray diffraction we can accomplish a tensile strain sensitivity below 0.001% with a spatial resolution of better than 80 nm over a spatial extent of 100 µm on quasi 2D flakes of 1T-TaS2. Coherent diffraction patterns were collected from a ~100 nm thick sheet of 1T-TaS2 by scanning 12keV focused X-ray beam across and rotating the sample. We demonstrate that the strain distribution around micron and sub-micron sized ‘bubbles’ that are present in the sample may be reconstructed from these images. The experiments use state of the art synchrotron instrumentation, and will allow rapid and non-intrusive strain mapping of thin film samples and electronic devices based on quasi 2D materials.

nano X-ray diffraction↗
DOE OSTI2020

Unveiling 3D Morphology of Multiscale Micro-Nanosilver Sintering for Advanced Electronics Manufacturing by Ptychographic X-ray Nanotomography

The sintering processing–structure–property relationship of a multiscale silver materials is investigated: microparticles with nanofeatures, particularly on their three-dimensional (3D) morphology. The target application is to replace conventional lead-based solders in advanced electronic manufacturing. Unlike lead-based solders, silver powders are suited to satisfy increasingly demanding mechanical, electrical, and thermal requirements, meanwhile being free of health effect. Sintering the material at a low temperature and without applied pressure are desirable conditions, which results in a preferred use of silver nanoparticles, as nanofeatures have higher driving force to sinter with the decrease in particle size. However, nanosized powders present potential health/environmental effects. To address the trade-off between the benefits and shortcomings of nano-versus microparticles, this work studies a novel multiscale silver paste, namely micron-sized powders with nanosized features. To get quantitative 3D visualization of micro- and nanoscale features, ptychographic X-ray computed nanotomography is applied. The correlations between conditions (thermal aging, pressure, and substrate metallization), mechanical properties, and morphological parameters are established. Finally, using novel 3D X-ray nanoimaging technique, it is demonstrated that one can design multiscale materials while balancing complex demands required in advanced electronics manufacturing and research directions in materials design and characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Unveiling the Mechanical and Electrochemical Evolution of Nanosilicon Composite Anodes in Sulfide-Based All-Solid-State Batteries

The utilization of silicon anodes in all-solid-state lithium batteries provides good prospects for facilitating high energy density. However, the compatibility of sulfide solid-state electrolytes (SEs) with Si and carbon is often questioned due to potential decomposition. Here, in this paper, operando X-ray absorption near-edge structure (XANES) spectroscopy, ex situ scanning electron microscopy (SEM), and ex situ X-ray nanotomography (XnT) are utilized to investigate the chemistry and structure evolution of nano-Si composite anodes. Results from XANES demonstrate a partial decomposition of SEs during the first lithiation stage, which is intensified by the presence of carbon. Nevertheless, the performances of first three cycles in Si–SE–C are stable, which proves that the generated media is ionically conductive. XnT and SEM results show that the addition of SEs and carbon improves the structural stability of the anode, with fewer pores and voids. A chemo-elasto-plastic model reveals that SEs and carbon buffer the volume expansion of Si, thus enhancing mechanical stability. The balance between the pros and cons of SEs and carbon in enhancing reaction kinetics and structural stability enables the Si composite anode to demonstrate the highest Si utilization with higher specific capacities and a better rate than pure Si and Si composite anodes with only SEs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Hierarchically Structured Vitrimer Biocomposites for Sustainable Manufacturing

Polymers containing dynamic covalent bonds (DCBs) exhibit thermoplastic-like flow above their topology freezing temperature (T v ) while maintaining thermoset-like properties below it, making them promising for sustainable manufacturing. However, their large-scale adoption remains limited due to challenges in accurately determining T v and achieving efficient fiber-matrix bonding in composite applications. Here, hierarchically structured epoxy-anhydride-based polyester vitrimer composites reinforced with cellulosic filaments is demonstrated, where hydroxyl groups on fiber surfaces participate directly in transesterification with the matrix. Further, this dynamic interfacial bonding delivers exceptional mechanical properties, including ≈70 MPa shear strength and >10% strain-to-failure, while enabling thermal malleability. Using a combination of nuclear magnetic resonance and nano-infrared spectroscopies, direct evidence is provided that chemical bond exchange begins well below the conventionally measured T v , supporting the hypothesis that rheologically determined T v reflects a combination of chemical exchange and frictional dynamics rather than a discrete transition. The composites demonstrate excellent processability through vacuum-assisted resin transfer molding and maintain >90% of their mechanical properties after multiple thermal reforming cycles. These findings advance both the fundamental understanding of vitrimeric transitions and the practical development of sustainable, high-performance composite materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Self‐Strain Suppression of the Metal‐to‐Insulator Transition in Phase‐Change Oxide Devices

Strongly correlated materials exhibiting phase transitions which can be controlled through external stimuli, such as electric fields, are promising for future computing technologies beyond conventional semiconductor transistors. Devices that take advantage of structural phase transitions have inherent built‐in memory, reminiscent of synapses and neurons, and are thus natural candidates for neuromorphic computing. Of particular interest are phase‐change oxides, which allow for control over the metal‐to‐insulator transition. Here, X‐ray nano‐diffraction structural imaging of micro‐devices fabricated with the archetypal phase‐change material vanadium sesquioxide (V 2 O 3 ) is reported. The devices contain a Ga ion‐irradiated region where the metal‐to‐insulator transition critical temperature is lowered, a useful feature for controlling neuron‐like spiking behavior. Results show that strain, induced by crystal lattice mismatch between the pristine and irradiated material, leads to a suppression of the metal‐to‐insulator‐transition. Suppression occurs within the irradiated region or along its edges, depending on the defect‐distribution and the size of the region. The observed self‐straining effect can extend to other phase‐change oxides and dominate as device dimensions are reduced and become too small to dissipate strain within the irradiated region. The findings are important for phase engineering in phase‐change devices and highlight the necessity to study phase transitions at the nanoscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Transforming nanoscale VO 2 (B) into a scalable sodium-ion electrode

The intermittent nature of renewable energies requires highly reliable grid-level energy storage approaches. A critical consideration in developing this technology is the areal capacity which determines battery performance and influences the cost of battery technology. Of related importance is finding new ways of developing scalable electrodes. In recent years, three-dimensional (3D) printing of conductive scaffolds has emerged as an alternative to overcome the scalability limitations of commercial tape cast electrodes. The research carried out in the current study demonstrates a successful scalability pathway for nanoscale VO 2 (B), a desirable cathode for sodium-ion batteries which has a nano-flower morphology with a crystallite size < 20 nm. By electrodepositing VO 2 (B) onto a graphene aerogel scaffold, we were able to achieve mass loading of over 100 mg·cm −2 and still possess an areal capacity of 10 mAh·cm −2 at a current density of 5 mA·cm −2 . Moreover, after 1000 cycles, these electrodes retained 75% to 80% of their initial capacity. Even at high loading levels, the electrodeposited VO 2 (B) exhibits pseudocapacitive material signatures such as a box-like voltammetry response, linear galvanostatic response, and no phase change upon lithiation. The scalability of the VO 2 (B) electrode is demonstrated in a series of experiments which show the areal capacity to scale upon increase in both mass loading and electrode thickness, with only small changes in specific capacity. Furthermore, this study establishes that nanoscale materials can be scaled up to achieve thick electrodes without compromising their electrochemical properties.

additive manufacturing↗
DOE OSTI2022

Half-cell electrode assessments of a crossover-tolerant direct methanol fuel cell with a platinum group metal-free cathode

In this work, a platinum group metal- free (PGM-free) Fe-N-C oxygen reduction reaction (ORR) catalyst derived from metal organic framework precursors (Fe-MOF) is evaluated at the cathode side of a direct methanol fuel cell (DMFC). A wide range of methanol concentrations were used, and the performance of the DMFC using air was evaluated and compared to a commercial Pt/C cathode. We conducted our tests with a custom, integrated H 2 reference electrode that separately provided the anode and cathode overpotentials. This allowed us to perform a Tafel analysis on both electrodes and understand the dominant polarizations involved at the PGM-free cathode and the PtRu/C anode. Overall, we achieved a high cell performance using a Fe-N-C based catalyst under liquid methanol and air operation with a peak power density of 111 mW/cm 2 , where the cathode presented a markedly larger contribution to the voltage loss versus the anode. Additionally, we used nanoscale X-ray computed tomography (nano-CT) to image the Fe-N-C cathode and investigate the ionomer and pore size distributions allowing us to identify areas of improvement for catalyst layer fabrication.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

On the use of charged particles to characterize precipitation in irradiated reactor pressure vessel steels with a wide range of compositions

Nuclear reactor lifetimes may be limited by nano-scale Cu-Mn-Ni-Si precipitates (CRPs and MNSPs) that form under neutron irradiation (NI) of pressure vessel (RPV) steels, resulting in hardening and ductile to brittle transition temperature increases (embrittlement). Physical models of embrittlement must be based on characterization of precipitation as a function of the combination of metallurgical and irradiation variables. Here we focus on rapid and convenient charged particle irradiations (CPI) to both: a) compare to precipitates formed in NI; and, b) use CPI to efficiently explore precipitation in steels with a very wide range of compositions. Atom probe tomography (APT) comparisons show NI and CPI for similar bulk steel solute contents yield nearly the same precipitate compositions, albeit with some differences in their number density, size and volume fraction (f) dose (dpa) dependence. Yet, the overall precipitate evolutions are very similar. Advanced high Ni (>3 wt%) RPV steels, with superior unirradiated properties, were also investigated at high CPI dpa. For typical Mn contents, MNSPs have Ni 16 Mn 6 Si 7 or Ni 3 Mn 2 Si phase type compositions, with f values that are close to the equilibrium phase separated values. In contrast, in steels with very low Mn and high Ni, Ni 2-3 Si silicide phase type precipitate compositions are observed; and when Ni is low, the precipitate compositions are close to the MnSi phase field. Low Mn significantly reduces, but does not eliminate, precipitation in high Ni steels. A comparison of dispersed barrier model predictions with measured hardening data suggests that the Ni-Si dominated precipitates are weaker dislocation obstacles than the G phase type MNSPs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Development and characterization of a low-density TiNbZrAlTa refractory high entropy alloy with enhanced compressive strength and plasticity

A new refractory high entropy alloy (RHEA) is designed by combining refractory elements Nb and Ta with Ti, Zr, and Al, resulting in a (TiNbZr) 89 (AlTa) 11 alloy composition with a low-density of 6.0 g/cm 3 . The novel RHEA features a BCC matrix with B2 and Zr 5 Al 3 nano precipitates, exhibiting a compressive yield strength of ~890 MPa and specific yield strength of ~148.3 MPa g -1 cm 3 . Remarkably, the alloy demonstrates excellent compressive plasticity of ~70% at 298 K. As the temperature increases to 873 K, 1073 K, and 1273 K, the yield strength of the RHEA gradually decreases to ~610 MPa, ~ 210 MPa, and ~ 60 MPa, respectively. These results indicate that this novel RHEA showcases a combination of good specific strength and plasticity. Post-compression, B2, and Zr 5 Al 3 phases are observed. In conclusion, the second-phase particles dispersed throughout the grains hinder dislocation motion and contribute to the formation of sub-grain boundaries during hot compression.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cryogenic mechanical behaviors of CrMnFeCoNi high-entropy alloy

The CrMnFeCoNi high-entropy alloy (HEA) exhibits higher yield strength, ultimate strength and ductility at lower temperature. To further clarify the effect of the testing temperature on microstructure evolution, in this study in-situ synchrotron-based high-energy X-ray diffraction tensile tests were carried out from 298 K down to 123 K. The enhanced yield strength of the alloy at cryogenic temperatures can be attributed to the greater lattice distortion prior to plastic deformation. Higher strain hardening rate leads to the simultaneously enhanced strength and ductility of the studied HEA below room temperature. Both dynamic Hall-Petch hardening (twinning) and dislocation hardening provide high work hardening capacity for this alloy during the plastic deformation at cryogenic temperatures. The increased dislocation density and nano-twins at cryogenic temperatures can be attributed to the decrease in the stacking fault energy as the deformation temperature decreases. These studies could provide an in-depth understanding for the strengthening mechanisms of the HEA in different temperature conditions and guide the exploration of HEAs with superb mechanical properties at cryogenic environments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Solid-state reaction mediated microstructural evolution in a spark plasma sintered in situ Ti–B 4 C composite

For this study, a novel porosity-free in situ Ti–B 4 C composite was fabricated via spark plasma sintering (SPS). Detailed analysis of the phase evolution, coupling results from XRM, XRD and SEM-EBSD-EDS, indicate that primarily TiB 2 precipitates formed due to the in-situ reactions between the boron-carbide and titanium powders. The precipitation of TiB 2 resulted in the formation of a graphitic C-rich thin layer circumscribing the partially reacted B 4 C particles. Further progression of the in-situ reaction leads to the out-diffusion of the excess carbon from the B 4 C particles, across the graphite and TiB 2 phases, forming TiC upon reacting with the titanium matrix. Therefore, the final microstructure primarily consisted of TiB 2 , TiC, and partially reacted B 4 C phases, with small amounts of TiB, α-Ti, and graphite. Furthermore, the microstructure in these SPS processed in situ composites appeared to be the product of a solid-state Ti–B 4 C diffusion couple, substantially different from their fusion-based additively manufactured counterparts. Nano-indentation tests revealed a remarkably high average hardness of ~25 GPa for this SPS-processed Ti–B 4 C composite and comparable (with literature) phase-specific hardness and modulus values for the constituent TiB 2 , TiC, and B 4 C phases.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Hg Accumulation by Single-Cell Sulfate-Reducing Bacteria Methylating Mercury

Methylmercury (MeHg) is a potent neurotoxin that poses risks to ecosystems and human health. MeHg is produced by microbes following saturating-like kinetics. We hypothesize that this saturation reflects a limited intracellular mercury (Hg) accumulation. Here, in this study, we investigated Hg accumulation in Pseudodesulfovibrio hydrargyri BerOc1, a sulfate-reducing model strain able to methylate Hg. Cells were incubated with 0.5 and 2 μM of mercury (HgCl 2 ), and mercury localization was studied using synchrotron-based nano-X-ray fluorescence and high-resolution analytical electron microscopy. For both concentrations, Hg was detected in the bacterial cytosol, in addition to extracellular (Hg, S)-containing nanoparticles. Intracellular Hg levels were slightly higher at 2 μM than at 0.5 μM (1.61 vs 1.40 pg.mm –2 ), suggesting a regulated accumulation. However, the population exhibited heterogeneity in Hg accumulation, particularly at the highest Hg exposure, with some cells being Hg hyperaccumulators. Correlative imaging between Hg localization and cell viability revealed that these hyperaccumulating cells were non-active. Our results suggest that active cells regulate Hg accumulation. From an analytical perspective, a minor subpopulation of hyperaccumulating cells can bias bulk measurements and should be considered in interpreting Hg accumulation in microorganisms. Environmentally, these cells can impact Hg cycling by acting as a metal sink.

Intracellular accumulation↗
DOE OSTI2021

Interstitial Nature of Mn 2+ Doping in 2D Perovskites

Halide perovskites doped with magnetic impurities (such as the transition metals Mn 2+ , Co 2+ , Ni 2+ ) are being explored for a wide range of applications beyond photovoltaics, such as spintronic devices, stable light-emitting diodes, single-photon emitters, and magneto-optical devices. However, despite several recent studies, there is no consensus on whether the doped magnetic ions will predominantly replace the octahedral B-site metal via substitution or reside at interstitial defect sites. Here, by performing correlated nanoscale X-ray microscopy, spatially and temporally resolved photoluminescence measurements, and magnetic force microscopy on the inorganic 2D perovskite Cs 2 PbI 2 Cl 2 , we show that doping Mn 2+ into the structure results in a lattice expansion. The observed lattice expansion contrasts with the predicted contraction expected to arise from the B-site metal substitution, thus implying that Mn 2+ does not replace the Pb 2+ sites. Photoluminescence and electron paramagnetic resonance measurements confirm the presence of Mn 2+ in the lattice, while correlated nano-XRD and X-ray fluorescence track the local strain and chemical composition. Density functional theory calculations predict that Mn 2+ atoms reside at the interstitial sites between two octahedra in the triangle formed by one Cl – and two I – atoms, which results in a locally expanded structure. These measurements show the fate of the transition metal dopants, the local structure, and optical emission when they are doped at dilute concentrations into a wide band gap semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural and Valence State Modification of Cobalt in CoPt Nanocatalysts in Redox Conditions

Platinum is the primary catalyst for many chemical reactions in the field of heterogeneous catalysis. However, platinum is both expensive and rare. Therefore, it is advantageous to combine Pt with another metal to reduce cost while also enhancing stability. To that end, Pt is often combined with Co to form Co-Pt nanocrystals. However, dynamical restructuring effects that occur during reaction in Co-Pt ensembles can impact catalytic properties. In this study, model Co 2 Pt 3 nanoparticles supported on carbon were characterized during a redox cycle with two in situ approaches, namely X-ray absorption spectroscopy (XAS) and scanning transmission electron microscopy (STEM) using a multimodal microreactor. The sample was exposed to temperatures up to 500 °C under H 2 , and then to O 2 at 300 °C. Irreversible segregation of Co in the Co-Pt particles was seen during redox cycling and substantial changes of the oxidation state of Co were observed. After the H 2 treatment, a fraction of Co could not be fully reduced and incorporated into a mixed Co-Pt phase. Re-oxidation of the sample increased Co segregation, and the segregated material had a different valence state than in the fresh, oxidized sample. Furthermore, this in situ study describes dynamical restructuring effects in CoPt nano-catalysts at the atomic scale that are crucial to understand to improve the design of catalysts used in major chemical processes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Infrared Nanoimaging of Hydrogenated Perovskite Nickelate Memristive Devices

Solid-state devices made from correlated oxides, such as perovskite nickelates, are promising for neuromorphic computing by mimicking biological synaptic function. However, comprehending dopant action at the nanoscale poses a formidable challenge to understanding the elementary mechanisms involved. Here, we perform operando infrared nanoimaging of hydrogen-doped correlated perovskite, neodymium nickel oxide (H-NdNiO 3 , H-NNO), devices and reveal how an applied field perturbs dopant distribution at the nanoscale. This perturbation leads to stripe phases of varying conductivity perpendicular to the applied field, which define the macroscale electrical characteristics of the devices. Hyperspectral nano-FTIR imaging in conjunction with density functional theory calculations unveils a real-space map of multiple vibrational states of H-NNO associated with OH stretching modes and their dependence on the dopant concentration. Moreover, the localization of excess charges induces an out-of-plane lattice expansion in NNO which was confirmed by in situ X-ray diffraction and creates a strain that acts as a barrier against further diffusion. Our results and the techniques presented here hold great potential for the rapidly growing field of memristors and neuromorphic devices wherein nanoscale ion motion is fundamentally responsible for function.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Artificial generation of representative single Li-ion electrode particle architectures from microscopy data

Accurately capturing the architecture of single lithium-ion electrode particles is necessary for understanding their performance limitations and degradation mechanisms through multi-physics modeling. Information is drawn from multimodal microscopy techniques to artificially generate LiNi 0.5 Mn 0.3 Co 0.2 O 2 particles with full sub-particle grain detail. Statistical representations of particle architectures are derived from X-ray nano-computed tomography data supporting an ‘outer shell’ model, and sub-particle grain representations are derived from focused-ion beam electron backscatter diffraction data supporting a ‘grain’ model. A random field model used to characterize and generate the outer shells, and a random tessellation model used to characterize and generate grain architectures, are combined to form a multi-scale model for the generation of virtual electrode particles with full-grain detail. This work demonstrates the possibility of generating representative single electrode particle architectures for modeling and characterization that can guide synthesis approaches of particle architectures with enhanced performance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Oblique angle deposition of boron carbide films by magnetron sputtering

Many applications of boron carbide (B4C) films entail deposition on non-planar substrates, necessitating a better understanding of oblique angle deposition phenomena. Here, we systematically study the effect of substrate tilt on properties of B 4 C films with thicknesses up to 10 μm deposited by direct current magnetron sputtering. Results show that all films are amorphous and columnar with an average column width of ~100 nm, independent of substrate tilt. Column tilt angles are limited to ~20° even for substrate tilt of 80°. Film density, residual stress, and the refractive index weakly (within ≲20%) depend on substrate tilt. Furthermore, oxygen impurities bond preferentially with carbon atoms in inter-columnar regions. Substrate tilt has a major effect on mechanical properties that decrease by ~50%, suggesting weak interconnection between nano-columns. Implications of these observations for the deposition onto non-planar substrates are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ferromagnetic liquid droplets with adjustable magnetic properties

Significance Structured functional liquids combine mechanical versatility of fluids with solid-state properties, such as ferromagnetism, and offer a route to synthesize and control magnetic liquids for adaptive liquid robotics. Studies on these intriguing materials are only in their nascent state, and a profound understanding of the physical state is still lacking. We use hydrodynamics experiments to probe how the magnetization of ferromagnetic liquid droplets, governed by the assembly and jamming of magnetic nanoparticles at liquid–liquid interfaces, and their response to external stimuli can be tuned by chemical, structural, and magnetic means. Our results highlight the leading role of structural short-range order on magnetic properties, which provide a path toward nano-patterning structured liquids.

36 MATERIALS SCIENCE↗