Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NUCLEAR MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

The Formation and Modeling of Colloids from the Corrosion of Nuclear Waste Forms

This paper describes a model for determining the stability and associated radionuclide concentrations of colloids that might be present in the nuclear waste package environment from degradation of the nuclear waste forms. The model simplifies radionuclide–colloid behavior by assuming that all colloids can be defined as either smectite clay, a mixed actinide-bearing rare earth-zirconium oxide, iron oxyhydroxide (ferrihydrite {FeOOH}, or uranophane {Ca(UO2)2(SiO3OH)2(H2O)5}. However, for the purposes of predictive stability modeling, the colloids are conceptually represented as montmorillonite, ZrO2, hematite, and meta autunite, respectively. The model uses theoretical calculations and laboratory data to determine the stability of modeled colloids with ionic strength and pH. The true nature of colloid composition and heterogeneity, generation, and flocculation will be extremely complex, involving the formation of numerous types of phases, often depending on the composition of the various waste forms and waste package materials. This model strives to capture the uncertainty of the real system using theoretical models. In this paper, one of the four representative colloids designed to capture the behavior of the spent fuel derived colloids is described in detail.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutrino-Nucleus Reactions at MeV Region based on New Shell-Model Hamiltonians

Neutrino-nucleus reactions at MeV region are evaluated by using new shell model Hamiltonians, which are found to improve the description of spin degrees of freedom in nuclei as well as shell evolutions. The light element synthesis by neutrino processes in supernova explosions is discussed with the use of the new reaction cross sections for {sup 12}C and {sup 4}He. Possible constraints on the mixing angle {theta}{sub 13} and the neutrino mass hierarchy are pointed out to be imposed by the production yields of {sup 7}Li and {sup 11}B. Spin-dipole transition strengths in {sup 16}O and neutrino-induced reactions on {sup 16}O are investigated with the new improved Hamiltonian. The Gamow-Teller transition strength in {sup 56}Ni for the new Hamiltonian, which is more fragmented compared to previous calculations, is found to lead to the enhancement of the production yield of {sup 55}Mn in population III stars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Understanding chaos via nuclei

We use two models of nuclear collective dynamics-the geometric collective model and the interacting boson model-to illustrate principles of classical and quantum chaos. We propose these models as a suitable testing ground for further elaborations of the general theory of chaos in both classical and quantum domains.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear speed and cycle length co-vary with local density during syncytial blastoderm formation in a cricket

Abstract The blastoderm is a broadly conserved stage of early animal development, wherein cells form a layer at the embryo’s periphery. The cellular behaviors underlying blastoderm formation are varied and poorly understood. In most insects, the pre-blastoderm embryo is a syncytium: nuclei divide and move throughout the shared cytoplasm, ultimately reaching the cortex. In Drosophila melanogaster , some early nuclear movements result from pulsed cytoplasmic flows that are coupled to synchronous divisions. Here, we show that the cricket Gryllus bimaculatus has a different solution to the problem of creating a blastoderm. We quantified nuclear dynamics during blastoderm formation in G. bimaculatus embryos, finding that: (1) cytoplasmic flows are unimportant for nuclear movement, and (2) division cycles, nuclear speeds, and the directions of nuclear movement are not synchronized, instead being heterogeneous in space and time. Moreover, nuclear divisions and movements co-vary with local nuclear density. We show that several previously proposed models for nuclear movements in D. melanogaster cannot explain the dynamics of G. bimaculatus nuclei. We introduce a geometric model based on asymmetric pulling forces on nuclei, which recapitulates the patterns of nuclear speeds and orientations of both unperturbed G. bimaculatus embryos, and of embryos physically manipulated to have atypical nuclear densities.

59 BASIC BIOLOGICAL SCIENCES↗

Neutron contribution to nuclear deeply virtual Compton scattering asymmetries

Using a simple model for nuclear generalized parton distributions (GPDs), we study the role of the neutron contribution to nuclear deeply virtual Compton scattering (DVCS) observables. As an example, we use the beam-spin asymmetry A{sub LU}{sup A} measured in coherent and incoherent DVCS on a wide range of nuclear targets in the HERMES and JLab kinematics. We find that at small values of the momentum transfer t,A{sub LU}{sup A} is dominated by the coherent-enriched contribution, which enhances A{sub LU}{sup A} compared to the free proton asymmetry A{sub LU}{sup p},A{sub LU}{sup A}({phi})/A{sub LU}{sup p}({phi})=1.8-2.2. At large values of t, the nuclear asymmetry is dominated by the incoherent contribution and A{sub LU}{sup A}/({phi})A{sub LU}{sup p}({phi})=0.66-0.74. The deviation of A{sub LU}{sup A}({phi})/A{sub LU}{sup p}({phi}) from unity at large t is a result of the neutron contribution, which gives a possibility to constrain neutron GPDs in incoherent nuclear DVCS. A similar trend is expected for other DVCS asymmetries.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparisons of cross-section predictions for relativistic iron and argon beams with semiempirical fragmentation models

Cross-section predictions with semi-empirical nuclear fragmentation models from the Langley Research Center and the Naval Research Laboratory are compared with experimental data for the breakup of relativistic iron and argon projectile nuclei in various targets. Both these models are commonly used to provide fragmentation cross-section inputs into galactic cosmic ray transport codes for shielding and exposure analyses. Overall, the Langley model appears to yield better agreement with the experimental data.

Townsend, Lawrence W.↗

Automatic recognition system for document digitization in nuclear power plants

With the increasing number of data-driven models in nuclear applications, large volumes of numerical data are required to accurately model and predict the health status of a plant component. However, many historical operation logs that contain useful information are not fully utilized due to the lack of a systematic approach of digitization. To overcome this issue, this study proposes an automatic pipeline for extracting information from handwritten tabular documents collected from nuclear power plants. In our pipeline, we first denoise scanned documents with morphological operations, and then extract relevant parts from individual pages using both traditional computer vision and neural network methods. Handwriting recognition is applied to obtain text and numbers. As the most challenging step is how to crop only relevant information, the main focus of our paper is to detect tables and cells from scanned handwritten documents. Here we evaluate the efficiency and accuracy of our proposed method on handwritten operational reports obtained from a real-world case study. The results demonstrate the high accuracy and practicality of our proposed method.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Phase transition amplification of proton number fluctuations in nuclear collisions from a transport model approach

The time evolution of particle number fluctuations in nuclear collisions at intermediate energies (E lab = 1.23–10⁢A GeV) is studied by means of the UrQMD-3.5 transport model. The transport description incorporates baryonic interactions through a density-dependent potential. This allows for an implementation of a first-order phase transition including a mechanically unstable region at large baryon density. The scaled variance of the baryon and proton number distributions is calculated in the central cubic spatial volume of the collisions at different times. A significant enhancement of fluctuations associated with the unstable region is observed. This enhancement persists to late times, reflecting a memory effect for the fluctuations. The presence of the phase transition has a much smaller influence on the observable event-by-event fluctuations of protons in momentum space.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Laying the Foundation for a Predictive Theory of Electroweak Nuclear Phenomena

Reliable model-independent predictions of nuclear processes such as beta-decay and neutrinonucleus scattering are important for many fundamental science and mission-related investigations; For example, accurate descriptions of as beta-decay are required for modeling the anti-neutrino spectrum of nuclear reactor, whether for trying to detect new physics such as sterile neutrinos, or remotely identifying the purpose of that reactor. For these activities, we need accurate calculations, as well as careful and thorough analyses of theoretical error and uncertainty in the underlying models and the many-body methods and codes used in solving that model. Unfortunately, modern theoretical calculations of these processes are inadequate for this task. At the heart of this inadequacy is the interaction between nucleons and other particles known as nuclear currents. Historically, descriptions of nuclear currents took into account only the simplest of particle interactions. Recently, the development of an effective field theory known as chiral EFT has been used to derive large corrections to these particle interactions. However, the complex nature of these corrections inhibited their use in ab initio methods of predicting nuclear processes. We developed a novel method to address these complexities and applied it in a series of benchmark and demonstrative calculations using state-of-the-art quantum few-nucleon solvers. Specifically, we studied the role of two-nucleon currents in electroweak processes using light nuclei (i.e., nuclei containing fewer than five nucleons) as a workbench to compute these processes and quantify their uncertainties using Bayesian extensions of the EFT.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Problem Specification for FY12 Modeling of UNF During Extended Storage

The Nuclear Energy Advanced Modeling and Simulation (NEAMS) program of the Advanced Modeling and Simulation Office (AMSO) of the US Department of Energy, Office of Nuclear Energy (DOE/NE) has invested in the initial extension and application of advanced nuclear simulation tools to address relevant needs in evaluating the performance of used nuclear fuel (UNF) during extended periods of dry storage. There are many significant challenges associated with the prediction of the behavior of used fuel during extended periods of dry storage and subsequent transportation. The initial activities are focused on integrating with the Used Fuel Disposition (UFD) Campaign of the DOE/NE and a demonstration that the Advanced Multi-Physics (AMP) Nuclear Fuel Performance code (AMPFuel) for modeling the mechanical state of the cladding after decades of storage. This initial focus will model the long-term storage of the UNF and account for the effect, and generation, of radially and circumferentially oriented hydride precipitates within the cladding and predict the end of storage (EOS) mechanical state (stress, strain) of the cladding. Predicting the EOS state of the cladding is significant because it (1) provides an estimate of the margin to failure of the cladding during nominal storage operation and it (2) establishes the initial state of the fuel for post-storage transportation. Because there are significant uncertainties associated with the storage conditions, hydride precipitate formation, and the beginning of storage (BOS) condition of the UNF, this will also allow for the development of a rigorous capability to evaluate the relative sensitivities of the uncertainties and can help to guide the experimental and analysis efforts of the UFD Campaign. This document is focused on specifying the problem that will be solved with AMPFuel. An associated report, documents the specifics of the constitutive model that will be developed and implemented in AMPFuel to account for the presence and predict the generation of the hydride precipitates. This report satisfies the deliverable for the DOE Office of Nuclear Energy, Advanced Modeling and Simulation Office, milestone M3MS-12OR0605083, 'Definition of Problem Specification,' which defines the problem to be solved that will satisfy milestone M2MS-12OR0605081, 'Demonstration of the Advanced Multi-Physics (AMP) Nuclear Fuel Performance code for modeling UFD.' This document should provide sufficient detail to model a high burnup pressurized water reactor (PWR) fuel rod to provide an estimate of the end of storage (EOS) mechanical state of the cladding. The fuel rod and irradiation history are based on seven cycles of irradiation in the CP and L H.B. Robinson nuclear reactor, which achieved a discharge burnup of 66.682 MWd/kgU. The fuel has been experimentally examined for storage conditions by Argonne National Laboratory for the NRC. In addition, we have compiled a list of key factors that have been shown to strongly influence the EOS state of the fuel and have identified baseline values and ranges of uncertainties that will be considered. The simulations that will be performed have been described in detail and include the modeling assumptions and boundary conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Nuclear Metal Fuel Casting Modeling Annual Report 2013

Actinide burning fuels in fast reactor applications have been a traditional approach. Recently, the use of metallic fuels in light-water reactors (LWR) applications has also been suggested. Although there has been some experience with the casting of cylindrical metallic binary or ternary fuels in the past, renewed attention to the casting of metallic fuels arises due to the fact that not only do we need to cast traditional constituents such as Pu, Zr, and U, but also add more difficult actinides such as Am and Np. Casting metallic fuel rods shows great promise, but fuel and transuranic losses must be minimized. Issues critical to the manufacture of transuranic containing fuels include fuel holdup in crucibles and molds, fuel loss into dross from crucible and mold wash coatings, generation of contaminated wastes such as mold pieces, and loss of volatile constituents from the crucible during heating and casting. This final issue potentially constrains the caster to a positive pressure design because Am has a high partial pressure allowing it to volatize from the liquid metal under vacuum. There have been several primary studies investigating the actinide volatilization issue in order to improve the caster design. As part of these efforts, a bench scale casting apparatus has been designed. Fuel manufacturing process modeling and simulation is a cost-effective way to explore some of the above-mentioned issues for the development of new manufacturing processes yielding minimum loss.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

UFD Proof-of-Concept Demonstration

The BISON Spent Nuclear Fuel modeling capability has been demonstrated through simulations of the complete nuclear fuel lifecycle including in-reactor irradiation, spent fuel pool cooling, vacuum drying and finally dry cask storage. The importance of hydrogen in the cladding and the formation of hydrides at various stages of the fuel lifecycle have been a focus of the initial development work. In addition, the integration in BISON of a hydride damage model has improved the prediction of the cladding mechanical behavior. The work described in this report was performed under funding from the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. This report is issued in satisfaction of the level 2 milestone M2MS-17IN0201012 on UFD Proof-of-Concept Demonstration for the INL Engineering-Scale Fuel Performance (BISON) Workpackage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Time-dependent relaxation of observables in complex quantum systems

Abstract We consider time-dependent relaxation of observables in quantum systems of chaotic and regular type. Using statistical arguments and exact numerical solutions we show that the spread of the initial wave function in the Hilbert space and the main characteristics of evolution of observables have certain generic features. The study compares examples of regular dynamics, a completely chaotic case of the Gaussian orthogonal ensemble, a bosonic system with random interactions, and a fully realistic case of the time evolution of various initial non-stationary states in the nuclear shell model. In the case of the Gaussian orthogonal ensemble we show that the survival probability obtained analytically also fully defines the relaxation timescale of observables. This is not the case in general. Using the realistic nuclear shell model and the quadrupole moment as an observable we demonstrate that the relaxation time is significantly longer than defined by the survival probability of the initial state. The full analysis does not show the presence of an analog of the Lyapunov exponent characteristic for examples of classical chaos.

Volya, Alexander (ORCID:0000000217656466)↗

Separate-Effects Validation Experiments for Models of Fracture in Ceramic Nuclear Fuel

A number of advances have recently been made in modeling fracture initiation and propagation in ceramic light water reactor (LWR) fuel. These include the use of techniques such as peridynamics, the extended finite element method (XFEM), the discrete element method (DEM), and phase field fracture. Improved predictions of fracture in LWR fuel can benefit fuel performance simulations in a number of ways, with important implications for radial relocation, pellet-cladding mechanical interactions, and fragmentation during accident conditions. Although these modeling approaches appear promising, to-date most of their applications have been to fresh fuel. A major limitation in applying these approaches with confidence to a wider variety of conditions, such as fragmentation of high-burnup fuel, is that there is very limited data that can be directly used to validate the results of these fracture models. While fracture patterns are available from cross-sections of numerous irradiated fuel rods, the fuel rods have typically been subjected to complex irradiation histories. To validate models of fracture propagation, focused experiments that give snapshots of the initiation and propagation of fracture under well characterized prototypical reactor conditions are needed. Under a multi-institutional U.S. Department of Energy Integrated Research Project (IRP), three separate-effects validation experiments are underway to provide information on the propagation of cracks in LWR fuel under controlled conditions. The primary challenge in developing such an experiment is in providing conditions that result in a radial temperature distribution that is prototypical of LWR in-reactor conditions. Two out-of-reactor experiments are being planned that employ very different approaches to achieve such a temperature distribution. The first of these achieves this by employing a combination of inductive and resistive electrical heating to generate volumetric heating. The second experiment involves slowly heating a pellet in a metal rod to a high temperature, and then quenching that rod in a cold bath. The quenching process generates a temperature profile approximating that in an LWR fuel rod for a moment, but has a very different temperature history from the LWR. Finally, an experiment is being planned for the Idaho National Laboratory TREAT reactor that will use nuclear fission as a heat source, and which will employ a metal heat sink to replicate the thermal conditions provided by coolant in an LWR. These experiments all have their advantages and drawbacks, with varying levels of ability to reproduce actual LWR conditions and varying ability to use instruments to monitor quantities of interest over the course of the experiment that can be used to validate fracture models. For that reason, these different experimental approaches are complimentary to each other, and the combined results are expected to significantly improve confidence in the ability of computational models to simulate fracture in ceramic nuclear fuel.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Shell And Halo Structure In Neutron-Rich Light Nuclei

Spectroscopic investigations performed at the neutron drip line in case of sd shell nuclei have recently shown the existence of the new magic numbers Z = 8 and N = 14,16. Predictions within the nuclear shell model calculations for the {sup 23,24}O ground state have been confirmed measuring their neutron occupancy in breakup reactions performed by using the inflight radioactive ion beams produced at the Fragment Separator FRS of GSI. Some perspectives of studying the evolution of magic numbers in this region of light exotic nuclei are given.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New magic nuclei and neutron-proton pairing

Special features of new magic nuclei and their connection with the shell structure are considered. The mechanism of neutron-proton pairing is proposed as a basis for the formation of new magic nuclei. A law of nucleon pairing is introduced. Spin-parity values are explained for a number of odd-odd nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗