Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

An experimental study of high Tc superconducting microstrip transmission lines at 35 GHz and the effect of film morphology

Microstrip transmission lines in the form of ring resonators were fabricated from a number of in-situ grown laser ablated films and post-annealed co-sputtered YBa2Cu3O(7-x) films. The properties of these resonators were measured at 35 GHz and the observed performance is examined in light of the critical temperature (Tc) and film thickness, and also the film morphology, which is different for the two deposition techniques. It is found that Tc is a major indicator of the film performance for each growth type, with film thickness becoming important as it decreases towards 1000 A. It is also found that the films with a mixed grain orientation (both a-axis and c-axis oriented grains) have poorer microwave properties as compared with the primarily c-axis oriented material. This is probably due to the significant number of grain boundaries between the different crystallites, which may act as superconducting weak links and contribute to the surface resistance.

Chorey, C. M.↗
NASA NTRS1991

The far-infrared morphology of the double-ringed galaxy NGC 4736 (M94) - A ring surrounding an extended nucleus

High spatial resolution 100-micron observations of the central region of the double-ringed spiral galaxy NGC 4736 (M94) were obtained using the Kuiper Airborne Observatory. The data show a strong central peak with secondary peaks at the radius of the inner ring (50 arcsec = 1.6 kpc). The nuclear emission is extended at 100 microns, with a radius of 15 arcsec (500 pc). The far-infrared morphology is similar to that of the molecular gas, while the H I distribution shows a pronounced central depression. Since most of the hydrogen gas in the inner regions of NGC 4736 is in molecular form, it is concluded that the far-infrared emission from NGC 4736 arises mainly from dust associated with molecular gas. The H-alpha distribution differs dramatically from the far-infrared and molecular gas distributions. The ring dominates the H-alpha emission, while the total 100-micron ring emission is only slightly larger than that of the nucleus, yielding an L(FIR)/L(H-alpha) for the nucleus about 100 times that of the ring. The bolometric luminosity of the stars in the inner 1 kpc of NGC 4736 is sufficient to power the far-infrared from this region, which suggests that a significant fraction of the far-infrared emission in the nuclear region of NGC 4736 is powered by non-OB stars rather than by star formation.

Smith, Beverly J.↗
NASA NTRS1991

Effects of brush seal morphology on leakage and pressure drops

Research on brush seals which was undertaken earlier by Braun et al. (1990) is continued. Particular attention is given to the effects of brush positioning, design, and morphology on sealing surfaces, fluid leakage, and associated pressure drops. It is found that both the structure and the design of the brush are important to its performance. High resistance to the flow of the brush/fence combination can result in catastrophic failure of the brush, while at lower flow resistances, the failure is more gradual.

Braun, M. J.↗
NASA NTRS1991

The X-ray morphology of the relaxed cluster of galaxies A2256. I - Evidence for a merger event

The rich cluster of galaxies A2256 are studied by utilizing the imaging proportional counter on board the X-ray observatory ROSAT. A2256 is considered to be a relaxed Coma-like cluster which is dynamically well evolved. Cleara evidence, however, is found for substructure in A2256. The X-ray surface brightness distribution reveals two separate maxima in the center; one of which is coincident with the central cD galaxy while the morphology of the other shows indications that it is merging with the main cluster body. The X-ray temperatures of the two maxima are different; the probable merging object being about a factor of five cooler than the cluster. The previously measured broad velocity distribution supports the idea that a merger is occurring in this cluster.

Briel, U. G.↗
NASA NTRS1992

Optical-Input, Optical-Output Morphological Processor

Some advantages of optical and electronic processing combined. Proposed optical-input/optical-output morphological processor is optoelectronic assembly performing some binary operations on picture elements of binary input image, yielding processed binary output image. Number of such processors cascaded to form more complicated image-processing system. Use of optics as connection medium makes rate of processing faster than in all-electronic system designed to perform same overall processing functions. At the same time, use of electronics as processing medium provides flexibility of reconfiguration not available in all-optical system.

Yu, Jeffrey W.↗
NASA NTRS1991

Morphology and evolution of coronae and ovoids on Venus

Coronae and ovoids on Venus were first identified in Venera 15/16 data. They are distinctive and apparently unique to the planet, and may be important indicators of processes operating in the Venusian mantle. Magellan images have provided the first high resolution views of coronae and ovoid morphology. Herein, the general geologic character is described of coronae and ovoids, and some inferences are drawn about their geologic evolution. Coronae are circular to elongate features surrounded by an annulus of deformational features, with a relatively raised or indistinct topographic signature and, commonly, a peripheral trough or moat. Ovoids are circular to elongate features other than coronae with either positive or negative topographic signatures, associated with tectonic deformation and volcanism. The relationship of these two geologic features to each other and to Venusian geology is briefly discussed.

Squyres, Steven W.↗
NASA NTRS1991

The x ray morphology of the relaxed cluster of galaxies A2256. 1: Evidence for a merger event

The rich cluster of galaxies A2256 was studied utilizing the imaging proportional counter (PSPC (Position Sensitive Proportional Counters)) on board the x-ray observatory ROSAT. A2256 is considered to be a relaxed, Comalike cluster which is dynamically well evolved. However, clear evidence for substructure in A2256 was found. The x-ray surface brightness distribution reveals two separate maxima in the center, one of which is coincident with the central cD galaxy while the morphology of the other shows indications that it is merging with the main cluster body. The x-ray temperatures of the two maxima are different; the probable merging object being about a factor of five cooler than the cluster. The previously measured broad velocity distribution supports the idea that a merger in this cluster is being observed.

Briel, U. G.↗
NASA NTRS1990

Effect of structure and morphology on thermal and electrical properties of polycarbonate film capacitors

Research is reported to identify polycarbonate (PC) film characteristics and fabrication procedures which extend the reliable performance range of PC capacitors to 125 C without derating, and establish quality control techniques and transfer technology to US PC film manufacturers. The approach chosen to solve these problems was to develop techniques for fabricating biaxially oriented (BX) 2 microns or thinner PC film with a low dissipation factor up to 140 C; isotropic dimensional stability; high crystallinity; and high voltage breakdown strength. The PC film structure and morphology was then correlated to thermal and electrical capacitor behavior. Analytical techniques were developed to monitor film quality during capacitor fabrication, and as a result, excellent performance was demonstrated during initial capacitor testing.

Yen, S. P. S.↗
NASA NTRS1992

Image masking using polygon fills and morphological transformations

Polygon-fill operations and morphological transformations are effective computational tools for the land-masking and coastline-correction preprocessing operations often applied to AVHRR data prior to oceanographic applications. These masking operations, in conjunction with cloud-screening techniques, can be used on such other oceanographically significant remote-sensing data as those of the Coastal Zone Color Scanner, GOES, and Landsat. The sensitivity of the methods to regional variations in atmospheric conditions and land-ocean temperature gradients is assessed for tropical, midlatitude, and high latitude regions.

Simpson, James J.↗
NASA NTRS1991

Surface morphologies and photoluminescence of diamond films deposited in a hot filament reactor

A diamond film made of (100)-oriented diamond crystallites has relatively flat surfaces in parallel with the silicon surface. This is desirable because it provides a smoother surface of the diamond film. The difficulty in retaining the (100)-oriented diamond crystallites is strongly influenced by the growth temperature. This paper reports the results from a study on the surface morphologies of diamond films deposited in a hot filament reactor at reduced substrate temperature compared to that deposited at higher temperature.

Srivinyunon, T.↗
NASA NTRS1992

The effect of compositionally-generated elastic stresses on morphological instability during directional solidification

The effect of compositionally-generated elastic stresses on the conditions for morphological instability during directional solidification of a dilute, ideal binary alloy is investigated using the Gibbs-Thomson equations for an elastically-stressed solid with zero surface stress in equilibrium with a liquid. It is found that these stresses lead to a small stabilization of the Mullins and Sekerka cellular mode of instability. The steady mode is stabilized by a stress-induced modification to the interfacial concentration of the solid, which in turn alters the amount of solute rejected to inhibit the growth of perturbations. The presence of elastic stresses could generate a new oscillatory instability which is most likely to be found in experiments near absolute stability for materials with segregation coefficients near unity and large solute expansion coefficients.

Spencer, B. J.↗
NASA NTRS1992

An interface tracking method applied to morphological evolution during phase change

The focus of this work is the numerical simulation of interface motion during solidification of pure materials. First, the applicability of the oft-used quasi-stationary approximation for interface motion is assessed. It is seen that such an approximation results in poor accuracy for nontrivial Stefan numbers. Solution of the full set of equations including grid movement terms yields close agreement with analytical results. Next, a generic interface tracking procedure is designed, which overcomes restrictions of single-valuedness of the interface imposed by commonly used mapping methods. This method incorporates with ease interface phenomena involving curvature, which assume importance at the smaller scales of a deformed interface. The method is then applied to study the development of a morphologically unstable phase interface. The issue of appropriate scaling has been addressed. The Gibbs-Thomson effect for curved interfaces has been included. The evolution of the interface, with the competing mechanisms of undercooling and surface tension is found to culminate in tip-splitting, cusp formation and persistent cellular development.

Shyy, W.↗
NASA NTRS1992

Cardiac morphology after conditions of microgravity during Cosmos 2044

Light- and electron-microscopic studies were performed on cardiac muscle from rats flown on Cosmos 2044 and from four control groups. Average cross-sectional area of myofibers was measured by video analysis of the light-microscopic images of papillary and ventricular muscle samples from all animals. This cross-sectional area was significantly decreased in flight rats (P = 0.03) compared with synchronous controls. Additional findings at the electron microscopic level consistent with this atrophy were obtained by stereological analysis and optical diffraction analysis of papillary muscle samples. Slightly higher mitochondrial volume density values and mitochondria-to-myofibril ratios as well as normal A-band spacings (d1,0) and Z-band spacings of myofibrils were observed in the tail-suspension and flight groups. General morphological features similar to those in ventricular samples from the previous Cosmos 1887 flight were observed.

Goldstein, Margaret A.↗
NASA NTRS1992

The morphology and evolution of coronae on Venus

The morphology and morphometry of a number of coronae and related features on Venus are discussed with reference to new data from the Magellan spacecraft. The specific features discussed are concentrated in the portion of Venus imaged during about the first three months of Magellan mapping. Sequences of events and basic geophysical processes involved in the formation of these features are inferred.

Squyres, Steven W.↗
NASA NTRS1992

Evaluating some computer exhancement algorithms that improve the visibility of cometary morphology

Digital enhancement of cometary images is a necessary tool in studying cometary morphology. Many image processing algorithms, some developed specifically for comets, have been used to enhance the subtle, low contrast coma and tail features. We compare some of the most commonly used algorithms on two different images to evaluate their strong and weak points, and conclude that there currently exists no single 'ideal' algorithm, although the radial gradient spatial filter gives the best overall result. This comparison should aid users in selecting the best algorithm to enhance particular features of interest.

Larson, Stephen M.↗
NASA NTRS1993

Hypervelocity impact study: The effect of impact angle on crater morphology

The Space Power Institute (SPI) of Auburn University has conducted preliminary tests on the effects of impact angle on crater morphology for hypervelocity impacts. Copper target plates were set at angles of 30 deg and 60 deg from the particle flight path. For the 30 deg impact, the craters looked almost identical to earlier normal incidence impacts. The only difference found was in the apparent distribution of particle residue within the crater, and further research is needed to verify this. The 60 deg impacts showed marked differences in crater symmetry, crater lip shape, and particle residue distribution. Further research on angle effects is planned, because the particle velocities for these shots were relatively slow (7 km/s or less).

Crawford, Gary↗
NASA NTRS1993

The large-scale morphology of IRAS galaxies

At present, visual inspection is the only method for comparing the large-scale morphologies in the distribution of galaxies to those in model universes generated by N-body simulations. To remedy the situation, we have developed a set of three structure functions (S1, S2, S3) that quantify the degree of large-scale prolateness, oblateness, and sphericity/uniformity of a 3-D particle distribution and have applied them to a volume-limited (less than = 4000 km/s) sample of 699 IRAS galaxies with f sub 60 greater than 1.2 Jy. To determine the structure functions, we randomly select 500 galaxies as origins of spherical windows of radius R sub w, locate the centroid of the galaxies in the window (assuming all galaxies have equal mass) and then, compute the principal moments of inertia (I sub 1, I sub 2, I sub 3) about the centroid. Each S sub i is a function of (I sub 2)/(I sub 1) and (I sub 3)/I sub 1). S1, S2, and S3 tend to unity for highly prolate, oblate, and uniform distributions, respectively and tend to zero otherwise. The resulting 500 values of S sub i at each scale R sub w are used to construct a histogram.

Babul, Arif↗
NASA NTRS1993

The morphology of and locations of star formation in impact induced ring galaxies

Observed ring galaxies appear to fall into two major types. The first tends to consist of isolated galaxies which display a smooth, apparently circular ring and a central nucleus. These have been variously classified as R(S) by de Vaucouleurs (1959) and as type O by Few and Madore (1986). The second class of ring galaxy nearly always has a close companion of comparable size (no less than about one tenth that of the ring galaxy). In these objects the ring is knotty in appearance, is usually elliptical, even when deprojected on the sky, and is often open on one side, having a 'horse shoe' or 'banana' shape. The nucleus does not usually appear at the center of the ring and is sometimes apparently absent, giving rise to an 'empty ring' galaxy. deVaucouleurs et al. (1976) designated this second type as RING, while Few and Madore (1986) have classified similar galaxies as P type. These galaxies have elevated far IR emission, bright HII regions, and blue spectral colors. The different environments of the two types or ring galaxy, together with their overall morphological and spectral differences suggest that the R(S)/O type are most probably the result of an instability that occurs in isolated galaxies, whereas the RING/P type appears to be the result of a recent collision between two roughly equal mass objects, at least one of which is a disk galaxy. Theys and Spiegel (1976) studied a sample of this latter type and identified three subclasses: RE: galaxies with crisp, empty rings; RN: galaxies like those of RE but with off-center nuclei; RK: galaxies having single dominant knots or condensations in the rings. A presentation of a preliminary understanding of the connections between these different observed forms in terms of parameters which are intrinsic to the galaxy system, such as time since collision and impact parameter, and in terms of our line of sight view is the purpose of this paper. Here we report results we have obtained from three dimensional computer simulations of collisions between equal mass galaxies, one of which is a rotating, disk galaxy containing both gas and stars and the other is an elliptical containing stars only. We have used a combined n-body/SPH program (see Balsara, 1990) to model fully self consistent models in which the halo mass is 2.5 times that of the disk and gas comprises ten percent of the disk mass.

Lamb, Susan A.↗