Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetic pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Structural transition and uranium valence change in UTe 2 at high pressure revealed by x-ray diffraction and spectroscopy

High-pressure x-ray diffraction up to 30 GPa, in conjunction with resonant emission x-ray spectroscopy and partial fluorescence yield x-ray absorption spectroscopy up to 52 GPa, were used to study how the structural and electronic properties of UTe2 evolve with pressure at room temperature. An orthorhombic-to-tetragonal phase transition was observed to occur between 5 and 7 GPa, with a large volume collapse of nearly 10% and a nearest U-U distance increase by about 4%. This lower-to-higher symmetry transition suggests less 5⁢f electron participation in bonding when the weakly correlated superconducting phase in the tetragonal structure of UTe 2 appears. Beyond 7 GPa, no new structural transitions were found up to 30 GPa. The resonant x-ray emission spectra clearly demonstrate an intermediate valence of U, nearly +3.74 at 1.8 GPa and room temperature, and reveal that the U valence shifts towards 4+, passes through a peak at 2.8 GPa, then decreases towards 3+ and settles down to a nearly constant value above 15 GPa. These experiments reveal that some fundamental structural and valence changes occur in UTe 2 at relatively low pressures, which could be responsible for the interplay between unconventional superconductivity, magnetic ordering, and weakly correlated superconductivity that is manifested in the temperature-pressure phase diagram of UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shell Models of RMHD Turbulence and the Heating of Solar Coronal Loops

A simplified nonlinear numerical model for the development of incompressible magnetohydrodynamics in the presence of a strong magnetic field B|| and stratification, nicknamed 'Shell-Atm,' is presented. In planes orthogonal to the mean field, the nonlinear incompressible dynamics is replaced by two-dimensional shell models for the complex variables u and b, allowing one to reach large Reynolds numbers while at the same time carrying out sufficiently long integrations to obtain good statistics at moderate computational cost. The shell models of different planes are coupled by Alfve'n waves propagating along B||. The model may be applied to open or closed magnetic field configurations where the axial field dominates and the plasma pressure is low; here we apply it to the specific case of a magnetic loop of the solar corona heated by means of turbulence driven by photospheric motions, and we use statistics for its analysis. The Alfven waves interact nonlinearly and form turbulent spectra in the directions perpendicular and, through propagation, also parallel to the mean field. A heating function is obtained and shown to be intermittent; the average heating is consistent with values required for sustaining a hot corona and is proportional to the aspect ratio of the loop to the -1.5 power, and haracteristic properties of heating events are distributed as power laws. Crosscorrelations show a delay of dissipation compared with energy content.

corona↗

Emergent multiferroism with magnetodielectric coupling in EuTiO 3 created by a negative pressure control of strong spin-phonon coupling

Negative pressure has emerged as a powerful tool to tailor the physical properties of functional materials. However, a negative pressure control of spin-phonon coupling for engineering magnetism and multiferroicity has not been explored to date. Here, using uniform three-dimensional strain-induced negative pressure in nanocomposite films of (EuTiO 3 ) 0.5 :(MgO) 0.5 , we demonstrate an emergent multiferroicity with magnetodielectric coupling in EuTiO 3 , matching exactly with density functional theory calculations. Density functional theory calculations are further used to explore the underlying physics of antiferromagnetic-paraelectric to ferromagnetic-ferroelectric phase transitions, the spin-phonon coupling, and its correlation with negative pressures. The observation of magnetodielectric coupling in the EuTiO 3 reveals that an enhanced spin-phonon coupling originates from a negative pressure induced by uniform three-dimensional strain. Our work provides a route to creating multiferroicity and magnetoelectric coupling in single-phase oxides using a negative pressure approach.

36 MATERIALS SCIENCE↗

Filament eruptions and the impulsive phase of solar flares

Filament motion during the onset of the solar flare impulsive phase is examined. The impulsive phase onset is established from profiles of about 30 keV X-ray fluxes and the rapid flare brightenings characteristic of the H-alpha flash phase. The filament motion begins several minutes before the impulsive or flash phase of the flare. No new accleration is observed in the motion of the filament during the onset of the impulsive phase for at least two of the four flares. The most common H-alpha brightenings associated with the impulsive phase lie near the magnetic inversion line roughly centered under the erupting filament. Filament speeds at the onset of the impulsive or flash phase lie in the range 30-180 km/s. These characteristics indicate that the filament eruption is not driven by the flare plasma pressure, but instead marks an eruption of magnetic field driven by a global MHD instability of the field configuration in the region of the flare.

Kahler, S. W.↗

High-pressure inelastic neutron scattering study of the anisotropic S = 1 spin chain [ Ni ( HF 2 ) ( 3 - Clpyradine ) 4 ] B F 4

[Ni(HF 2 )(3-Clpyradine) 4 ]BF 4 (NBCT) is a one-dimensional, S=1 spin-chain material that shows no long-range magnetic order down to thermometer temperatures of 0.1 K. Previous ambient pressure inelastic neutron scattering experiments identified NBCT to be in the large-D quantum paramagnetic phase of the D/J phase diagram, where D is the axial single-ion anisotropy and J is the intrachain superexchange. In this work, we extend the previous experiments to a hydrostatic pressure of 0.9 GPa. By comparing to density matrix renormalization group calculations, we find D/J increases from 1.5 to 3.2 as pressure increases from 0 GPa to 0.9 GPa, which pushes the system further into the large-D phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Heat conduction in an irregular magnetic field. Part 2. Heat transport as a measure of the effective non-integrable volume

Given the large anisotropy of transport processes in magnetized plasmas, the magnetic field structure can strongly impact heat diffusion: magnetic surfaces and cantori form barriers to transport while chaotic layers and island structures can degrade confinement. When a small but non-zero amount of perpendicular diffusion is included, the structure of the magnetic field becomes less important, allowing pressure gradients to be supported across chaotic regions and island chains. We introduce a metric for the effective volume over which the local parallel diffusion dominates based on the solution to the anisotropic heat diffusion equation. To validate this metric, we consider model fields with a single island chain and a strongly chaotic layer for which analytic predictions of the relative parallel and perpendicular transport can be made. We also analyse critically chaotic fields produced from different sets of perturbations, highlighting the impact of the mode number spectrum on the heat transport. Our results indicate that this metric coincides with the effective volume of non-integrability in the limit $\kappa _{\perp } \rightarrow 0$ , where $\kappa_{\perp}$ is the perpendicular diffusion coefficient. We propose that this metric be used to assess the impact of non-integrability on the heat transport in stellarator equilibria.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Orbital selective Kondo effect in heavy fermion superconductor UTe2

Abstract Heavy fermion systems emerge from the collective Kondo effect, and their superconductivity can serve as a promising platform for realizing next-generation quantum technologies. However, it has been a great challenge to explore many-body effects in heavy fermion systems with ab-initio approaches. We computed the electronic structure of UTe 2 without purposive judgements, such as intentional selection of on-site Coulomb interaction and disregarding spin-orbit coupling. We show that U-5 f electrons are highly localized in the paramagnetic normal state, giving rise to the Kondo effect. It is also found that the hybridization between U-5 f and U-6 d predominantly in the orthorhombic a b -plane is responsible for the high-temperature Kondo effect. In contrast, the hybridization between U-5 f and Te-5 p along the c -axis manifests the Kondo scattering at a much lower temperature, which could be responsible for the low-temperature upturn of the c -axis resistivity. Our results show that the electron correlation in UTe 2 is orbital selective, which naturally elucidates the recent experimental observations of anomalous temperature dependence of resistivity. Furthermore, we suggest that the Kondo effect is suppressed at high pressure owing to weak localization of magnetic moments, which results from enhanced U-5 f electron hopping. Our discovery provides significant insight toward understanding anisotropic quantum behavior including selective re-entrant superconductivity in heavy fermion UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Predictions of m/n = 2/1 neoclassical tearing mode stabilization via high field side lower hybrid current drive on the DIII-D tokamak

Neoclassical tearing modes (NTMs) are a class of resistive instabilities that arise in tokamaks at rational surfaces and form magnetic islands. These islands flatten the pressure gradient, reducing plasma performance and may lead to disruptions if they grow large enough. Driving current within the island can stabilize the NTM, which has been achieved with electron cyclotron current drive (ECCD) on multiple devices. An alternative to ECCD is lower hybrid current drive (LHCD), which offers the advantages of increased current drive efficiency and reduced system cost. LHCD has been viewed as poorly suited for NTM suppression due to the large spatial extent of the driven current when in the multi-pass absorption regime (as has been the case in all past LHCD experiments). However, the driven current is more localized when in the single pass absorption regime, as is predicted for the DIII-D high field side (HFS) LHCD experiment. This work evaluates the feasibility of NTM suppression with HFS LHCD on DIII-D by predicting the island growth rate for a set of representative DIII-D plasmas via the modified Rutherford equation with and without the application of LHCD. In these plasmas, NTM suppression is achieved at reasonable power levels, even with finite misalignment between LH current and the island. The effect of current condensation was included and found to be most significant at smaller island sizes, assuming an experimentally typical temperature perturbation amplitude of 10%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotope physics of heat and particle transport with tritium in JET-ILW type-I ELMy H-mode plasmas

As part the DTE2 campaign in the JET tokamak, we conducted a parameter scan in T and D-T complementing existing pulses in H and D. For the different main ion masses, type-I ELMy H-modes at fixed plasma current and magnetic field can have the pedestal pressure varying by a factor of 4 and the total pressure changing from <?CDATA $\beta_{\mathrm{N}} = 1.0$?> β N = 1.0 to 3.0. We investigated the pedestal and core isotope mass dependencies using this extensive data set. The pedestal shows a strong mass dependence on the density, which influences the core due to the strong coupling between both plasma regions. To better understand the causes for the observed isotope mass dependence in the pedestal, we analysed the interplay between heat and particle transport and the edge localised mode (ELM) stability. For this purpose, we developed a dynamic ELM cycle model with basic transport assumptions and a realistic neutral penetration. The temporal evolution and resulting ELM frequency introduce an additional experimental constraint that conventional quasi-stationary transport analysis cannot provide. Our model shows that a mass dependence in the ELM stability or in the transport alone cannot explain the observations. One requires a mass dependence in the ELM stability as well as one in the particle sources. The core confinement time increases with pedestal pressure for all isotope masses due to profile stiffness and electromagnetic turbulence stabilisation. Interestingly, T and D-T plasmas show an improved core confinement time compared to H and D plasmas even for matched pedestal pressures. For T, this improvement is largely due to the unique pedestal composition of higher densities and lower temperatures than H and D. With a reduced gyroBohm factor at lower temperatures, more turbulent drive in the form of steeper gradients is required to transport the same amount of heat. This picture is supported by quasilinear flux-driven modelling using TGLF -SAT2 within Astra . With the experimental boundary condition TGLF -SAT2 predicts the core profiles well for gyroBohm heat fluxes <?CDATA ${\gt}15$?> > 15 , however, overestimates the heat and particle transport closer to the turbulent threshold.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessing the impact of alpha particles on thermal confinement in JET D-T plasmas through global GENE-Tango simulations

The capability of the global, electromagnetic gyrokinetic GENE code interfaced with the transport Tango solver is exploited to address the impact of fusion alpha particles (in their dual role of fast particles and heating source) on plasma profiles and performance at JET in the discharges with the highest quasi-stationary peak fusion power during the DTE2 experimental campaigns. Employing radially global nonlinear electromagnetic GENE-Tango simulations, we compare results with/without alpha particles and alpha heating. Our findings reveal that alpha particles have a negligible impact on turbulent transport, with GENE-Tango converging to similar plasma profiles regardless of their inclusion as a kinetic species in GENE. On the other hand, alpha heating is found to contribute to the peaking of the electron temperature profiles, leading to a 1 keV drop on the on-axis electron temperature when alpha heating is neglected in Tango. The minimal impact of alpha particles on turbulent transport in this JET discharge–despite this being the shot with the highest fusion output–is attributed to the low content of fusion alpha in this discharge. To assess the potential impact of alpha particles on turbulent transport in regimes with higher alpha particle density, as expected in ITER and fusion reactors, we artificially increased the alpha particle concentration to levels expected for ITER. By performing global nonlinear GENE standalone simulations, we found that increasing the alpha particle density beyond five times the nominal value lead to significant overall turbulence destabilization. These results demonstrate that an increased alpha particle concentration can significantly impact transport properties under simulated JET experimental conditions. However, these findings cannot be directly extrapolated to ITER due to the substantial differences in parameters such as plasma size, magnetic field, plasma current, and thermal pressure.

energetic particles↗

Lattice distortions and metal-insulator transition in hexagonal FeS

Using total x-ray scattering and density functional theory calculations based on experimental data, we study the metal-insulator transition (MIT) in the strongly correlated system FeS with hexagonal symmetry. We find that it arises from the combined effect of static lattice distortions and antiferromagnetic ordering, while electron-electron correlations appear to play a minor role. The presence of local lattice distortions above the MIT explains well the evolution of transport and magnetic properties with changing temperature or pressure. Intrinsically, lattice distortions in hexagonal FeS act as lattice degrees of freedom that bridge competing electronic phases, thus facilitating transitions between them. The mechanism of MIT operating in h-FeS appears to be common to strongly correlated binary systems involving 3d transition metals, warranting further investigations on the lattice distortions-property relationship in this broad class of materials using the approach adopted here.

36 MATERIALS SCIENCE↗

Irradiation damage concurrent challenges with RAFM and ODS steels for fusion reactor first-wall/blanket: a review

Reduced activation ferritic martensitic (RAFM) and oxide dispersion strengthened (ODS) steels are the most promising candidates for fusion first-wall/blanket (FW/B) structures. The performance of these steels will deteriorate during service due to neutron damage and transmutation-induced gases, such as helium/hydrogen, at elevated operating temperatures. Here, after highlighting the operating conditions of fusion reactor concepts and a brief overview, the main irradiation-induced degradation challenges associated with RAFM/ODS steels are discussed. Their long-term degradation scenarios such as (a) low-temperature hardening embrittlement (LTHE)—including dose-temperature dependent yield stress, tensile elongations, necking ductility, test temperature effect on hardening, Charpy impact ductile-to-brittle transition temperature and fracture toughness, (b) intermediate temperature cavity swelling, (c) the effect of helium on LTHE and cavity swelling, (d) irradiation creep and (e) tritium management issues are reviewed. The potential causes of LTHE are discussed, which highlights the need for advanced characterisation techniques. The mechanical properties, including the tensile/Charpy impact of RAFM and ODS steels, are compared to show that the current generation of ODS steels also suffers from LTHE, and shows irradiation hardening up to high temperatures of ~400 °C–500 °C. To minimise this, future ODS steel development for FW/B-specific application should target materials with a lower Cr concentration (to minimise α'), and minimise other elements that could form embrittling phases under irradiation. RAFM steel-designing activities targeting improvements in creep and LTHE are reviewed. The need to better understand the synergistic effects of helium on the thermo-mechanical properties in the entire temperature range of FW/B is highlighted. Because fusion operating conditions will be complex, including stresses due to the magnetic field, primary loads like coolant pressure, secondary loads from thermal gradients, and due to spatial variation in damage levels and gas production rates, an experimentally validated multiscale modelling approach is suggested as a pathway to future reactor component designing such as for the fusion neutron science facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Turbulent field fluctuations in gyrokinetic and fluid plasmas

A key uncertainty in the design and development of magnetic confinement fusion energy reactors is predicting edge plasma turbulence. An essential step in overcoming this uncertainty is the validation in accuracy of reduced turbulent transport models. Drift-reduced Braginskii two-fluid theory is one such set of reduced equations that has for decades simulated boundary plasmas in experiment, but significant questions exist regarding its predictive ability. To this end, using a novel physics-informed deep learning framework, we demonstrate the first ever direct quantitative comparisons of turbulent field fluctuations between electrostatic two-fluid theory and electromagnetic gyrokinetic modelling with good overall agreement found in magnetized helical plasmas at low normalized pressure. This framework is readily adaptable to experimental and astrophysical environments, and presents a new technique for the numerical validation and discovery of reduced global plasma turbulence models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Density trace made with computer printout

Special drum for a computer-controlled printer improves density trace of scientific data. The drum provides uniformly shaped characters and evenly spaced variations of print density that precisely reflect data magnitude. This device plots temperature profiles, geographic contours, pressure gradients, electric potential gradients, and magnetic field configurations.

Wilson, M.↗

On the magneto-hydrostatic theory of sunspots.

Sunspot models used to derive relations between coolness of spot and its magnetic field strength and between magnetic field strength and ratio of mixing length to pressure scale height

SUNSPOT↗