Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MONTE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Validation of a Monte Carlo model for the MLC-Elekta Precise with MCNP6 - Paper 76

Cancer treatment using radiotherapy techniques needs an accurate prediction of the dose delivered to the patient at each position. Treatment planning systems (TPS) allow the optimization of the dose delivered to the tumor volume while minimizing the dose absorbed by the surrounding healthy tissue. Commercial treatment planning systems use empirical deterministic algorithms that do not correctly estimate the dose in the surroundings of heterogeneities. This lack of accuracy is taken into account as bigger security margins in the treatment, reducing the potential effect of the treatment. However, Monte Carlo (MC) simulation techniques have proved to predict the dose distribution more accurately and also representing experimental data better. Nevertheless, the clinical application of these techniques has been limited by the long calculation times they require. As high performance computers decrease in cost MC simulations become more feasible to be used in TPS. The present work improves a simplified model of the MLC-Elekta Precise linear accelerator (linac or unit from now on) previously developed and correctly validated by the group. A multileaf collimator (MLC) has been modelled according to the manufacturer specifications and added to the previous model to allow higher conformity in the studies. The full geometry has been entered to the MCNP6 Monte Carlo code to simulate the transport of particles through the linac. The geometry also includes a cubic water phantom for dosimetry studies and validation with experimental data. The experimental data employed for the dose distribution comparison has been measured at the linac from the linac Hospital Universitari Clinic de Valencia (Spain). Additionally, particles are stored in a phase space surface before their entrance in the water to be analyzed and for performance optimization. Given the results presented, we conclude that this first approach to validate a model of the Elekta Precise linac from the Hospital Cl nic Universitari de Valancia represents well the depth-dose distribution, but fails at representing the dose profiles. It has been shown that they predict too much penumbra, probably caused by the filtration between the leaves. In order to solve this problems, further work is needed to improve the simulated model. This work will mainly focus on the multileaf collimator. Also, the codes developed by the group to analyze phase space files produced by MCNP6 have proven highly useful. As work progress and the codes are debugged, they will be published so that the community can take advantage of them.

61 RADIATION PROTECTION AND DOSIMETRY↗

Evaluation of Low Power ARM Processors for Monte Carlo Particle Transport: MCNP6 on the ARM Cortex-A8 - Paper 83

In the push towards exascale computing, the limiting factors are power requirements and heat dissipation. Using current technology, the power required to drive an exascale supercomputer would near 400-MW. Clearly, future computing hardware will have to be more energy efficient in order to achieve exascale performance. Most of the current research in advanced computing architectures is in the use of standard CPUs with accelerators. However, these accelerators are not generally supported by the traditional scientific programming languages (C, C++, and Fortran) and the scientific software must be tailored specifically to take advantage of the accelerators. Large scale scientific software (hundreds-of-thousand to millions of lines of code) can not be easily ported to the computing platform du jour. The widespread use of low power ARM based processors in the mobile computing market offer a low power alternative to accelerators that are also supported by the traditional scientific programming languages and programming paradigms such as MPI and OpenMP. Computing architectures for scientific computing are often assessed using standard benchmarks such as LINPACK benchmark or using suites of mini-applications that are greatly simplified stand-ins for scientific software. Often the real applications that will deployed on the scientific supercomputers are not ported or tested until delivery of the machines. In order to evaluate the use of ARM processors for scientific computing the Monte Carlo particle transport code, MCNP version 6 was compiled on the ARM Cortex-A8 and a set of benchmark problems were used to assess performance in comparison to an Intel Xeon E5-2670 and the low power Intel Atom N270. MCNP is a continuous energy Monte Carlo particle transport code in development at Los Alamos National Laboratory since 1977. MCNP is used to transport neutrons, photon, electrons, and charged particles using continuous energy interaction data. It is commonly used in fields of nuclear power, nuclear medicine, radiation protection, and high-energy physics through-out the world. MCNP version 6 is approximately 450 thousand lines of code, written primary in Fortran90, with some C and C++. MCNP supports distributed multiprocessing using MPI and threading with OpenMP. The ARM Cortex-A8 executes MCNP6 using about twice as much power as the Intel Xeon E5-2670 and about the same amount of power as the Intel Atom N270. However, these results are encouraging for the use of low-power ARM chips in future supercomputers. The ARM Cortex-A8 is a 32-bit CPU and it's NEON general-purpose SIMD (single-instruction multiple data) engine does not support double-precision floating-point arithmetic. More recent ARM processors (ARM Cortex-A53 and Cortex-A57) support 64-bit addressing and have NEON co-processors that support double-precision floating-point arithmetic. ARM claims that the A50 series delivers a performance increase of 15 times the Cortex-A8 performance for similar power usage. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Induced Radioactivity Analysis for the NSRL Linac in China Using Monte Carlo Simulations and Gamma Spectroscopy - Paper 141

The Synchrotron Radiation Facility of the National Synchrotron Radiation Laboratory (NSRL) located in Hefei, China consists of a 200-MeV electron linear accelerator and an 800-MeV electronic storage ring. Constructed in 1989, the 200-MeV Electron linac is one of the earliest high-energy electron linear accelerators in China. The NSRL is a large-scale experiment device, having been operated more than twenty years, so it is hard to give a historical recount about the injection of NSRL Linac. Lower-energy electrons emitted from the accelerator electron gun are progressively accelerated to about 200 MeV in five acceleration tubes, and then are injected into the electron storage ring, reaching the final energy of 800 MeV. The linear accelerator is a traveling wave linear accelerator, consisting of pre-injection, four 6-m acceleration segment, some beam sensing elements, and focusing inserts. The electrons are accelerated in the acceleration tubes to 32 MeV, 74 MeV, 116 MeV, 158 MeV, respectively, and the electronic energy reaches 200 MeV at the end of the acceleration trip. A scraper is used for beam collimation and is located at the end of each acceleration tube, with a length that increases with the energy to provide sufficient collimation. The NSRL Linac was retired in 2012 due to a plan to upgrade the facility. The decommissioning produced many real challenges related to the methods to handle the large size of the device and the time required to store structural materials until the radioactivity is reduced in the waste repository. These problems should be solved as soon as possible in order for the upgrade to proceed smoothly. At present, no prior decommissioning experience existed in China on such a high-energy electron linear accelerator. Therefore, the decommission project provided an opportunity to study and evaluate the challenges, in particular, involving the induced radioactivity for the purposes of radiation protection. For a well-shielded accelerator facility, the induced radioactivity is an important source of radiation for people who perform the decommissioning. In addition, information on the level of induced radioactivity is needed for disposing of the retired accelerator materials. Therefore it is significant to predict such radioactivity level accurately. However, the induced radioactivity study for such type high-energy electron linear accelerator is very seldom. Particle accelerators that operate at energy greater than 10 MeV will produce induced radioactivity due to well-known photonuclear interactions. However, the assessment of such as induced radioactivity of large-scale installations is a time-consuming process. Experimental methods are time-consuming and require special radiation safety measures to protection the investigators. On the other hand, empirical formula cannot yield sufficiently accurate results. Therefore, Monte Carlo simulation method is the primary means to study such problems. In the decommissioning process of the NSRL Linac, the induced radioactivity assessment will be based on Monte Carlo simulation method as the main auxiliary means to expand a series of studies. (authors)

43 PARTICLE ACCELERATORS↗

Rod-by-rod detailed Monte Carlo method of Cofrentes NPP as a commercial core critical - 14482

The detailed rod-by-rod three dimensional modeling of large cores such as the commercial reactors is now possible. The simultaneous improvement in fuel depletion systems based on Monte Carlo codes allows using the criticality of first and reload cores as critical experiments, usually defined as commercial core criticals (CCC). The interest of such critical configurations for reload cores is evident for the validation of codes and cross-sections used for burn-up credit. Nevertheless other areas of the fuel management can benefit from this capabilities since the realistic rod-by-rod detailed modelling of fuel assemblies can provide valuable help in the optimization of reload patterns and in the licensing of other production-oriented calculation tools In this presentation the results obtained in reactivity and power distribution in the analysis of Cofrentes NPP first criticality and of a low-burnup xenon-equilibrium state-point and its comparison with in-core instrumentation measurements are presented. The plan for development of a local rod-by-rod Monte Carlo fuel depletion capability is presented as well. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

MONK10: A Monte Carlo Code for Criticality Analysis - 14574

The MONK{sup R} code, if we include its predecessor GEM, has now been in use for 50 years. It is a Monte Carlo code for nuclear criticality and reactor physics analyses which is used extensively in the UK nuclear industry and worldwide. In 2014 a major new version of the code, MONK10A, was released introducing many new features; these are described with example applications presented where appropriate. Experience with MONK9A models indicates that MONK10A has increased run-time performance for all cases and on average runs 2.4 times faster. New geometry options include the direct import of CAD generated models using the new IGES body, POLY body, TETMESH Hole and TETMESH Zone features. Example calculations for a selection of CAD import options are presented and compared with the intrinsic MONK geometry representation, with relative merits discussed. New Features are included to assist with the modeling of distributed parameters; such features include Unified Tally (UT), Action Tallies (AT) in UT and Shannon entropy. The latter is useful in assessing the convergence of distributed parameters, such as scalar neutron flux. As such it is an important tool in determining the appropriate point to stop settling and begin scoring stages in a Monte Carlo simulation. The utility of UT, AT-in-UT and Shannon entropy is demonstrated using calculations employing the new CAD import geometry options. Runtime Doppler broadening is included to allow accurate representation of temperature distributions within models. Example calculations which further demonstrate UT and AT-in-UT are presented for different bodies at different temperatures to evaluate the effects of temperature differences on k-effective and reaction rates. The MONK10A code was issued with a new set of continuous energy and group nuclear data libraries. These include JEFF3.1, JEFF3.1.1, JEFF 3.1.2, ENDF/B-VII.0 and CENDL 3.1 libraries. The inclusion of a range of libraries allows the user to evaluate the impact of different international nuclear data evaluations on their results and an example is provided to illustrate the differences that can arise from the use of different nuclear data evaluations. The code was also issued with a new version of the VisualWorkshop IDE to allow easy construction and editing of input decks, running of calculations and display of geometry and results. Examples are provided of the geometry and results display and showing how results can be superimposed upon the geometry. (authors)

42 ENGINEERING↗

Variance reduction techniques for Monte Carlo neutron noise simulations

The small fluctuations of the neutron flux caused by small perturbations of the macroscopic cross-sections take the name of neutron noise. Advanced Monte Carlo methods have been recently proposed in order to solve the neutron noise equations in the frequency domain, which allows establishing reference solutions to validate faster but approximate deterministic solvers. Due to the presence of particles carrying two statistical weights (for the real and imaginary components of the noise field), both of which may be positive or negative, Monte-Carlo simulations of neutron noise pose distinct challenges in terms of variance reduction. In this work we investigate two variance-reduction techniques, namely branchless collisions and weight cancellation, and probe their effectiveness for a benchmark con- figuration concerning the noise field induced by a pin with oscillating cross sections in a fuel assembly.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Time-step limits for a Monte Carlo Compton-scattering method

We perform a stability analysis of a Monte Carlo method for simulating the Compton scattering of photons by free electron in high energy density applications and develop time-step limits that avoid unstable and oscillatory solutions. Implementing this Monte Carlo technique in multi physics problems typically requires evaluating the material temperature at its beginning-of-time-step value, which can lead to this undesirable behavior. With a set of numerical examples, we demonstrate the efficacy of our time-step limits.

97 MATHEMATICS AND COMPUTING↗

Improved criticality convergence via a modified Monte Carlo iteration method

Nuclear criticality calculations with Monte Carlo codes are normally done using a power iteration method to obtain the dominant eigenfunction and eigenvalue. In the last few years it has been shown that the power iteration method can be modified to obtain the first two eigenfunctions. This modified power iteration method directly subtracts out the second eigenfunction and thus only powers out the third and higher eigenfunctions. The result is a convergence rate to the dominant eigenfunction being |k{sub 3}|/k{sub 1} instead of |k{sub 2}|/k{sub 1}. One difficulty is that the second eigenfunction contains particles of both positive and negative weights that must sum somehow to maintain the second eigenfunction. Summing negative and positive weights can be done using point detector mechanics, but this sometimes can be quite slow. We show that an approximate cancellation scheme is sufficient to accelerate the convergence to the dominant eigenfunction. A second difficulty is that for some problems the Monte Carlo implementation of the modified power method has some stability problems. We also show that a simple method deals with this in an effective, but ad hoc manner.

99 GENERAL AND MISCELLANEOUS↗

Improved Criticality Convergence via a Modified Monte Carlo Power Iteration Method

Monte Carlo transport codes typically estimate the fundamental mode of a nuclear system via a power iteration method. If the eigenvalues of the system are denoted $k$ 1 , $k$ 2 , $k$ 3 ..." with $k$ 1 > $k$ 2 ≥ $k$ 3 ≥ $k$ 4 ··· > 0, and corresponding eigenfunctions Ψ $m$ , it is well known that the Ψ $m$ mode disappears after $n$ iterations as ($k$ $m$ /$k$ 1 ) $n$ . When the dominance ratio $k$ 2 /$k$ 1 is near unity, the convergence to Ψ 1 can be very slow, even if the convergence to $k$ 1 is fast. The convergence to Ψ 1 sometimes can be dramatically improved by estimating Ψ 1 and Ψ 2 . A Monte Carlo implementation of the modified power iteration method requires the neutrons representing Ψ 2 to have both negative and positive weights because Ψ 2 cannot be of one sign. Thus, Ψ 2 is a sum of negatively and positively weighted neutrons. Instead of summing using point detector methods, a new simple binning procedure accelerates convergence to Ψ 1 .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Review of Monte Carlo Criticality Calculations - Convergence, Bias, Statistics

Monte Carlo criticality calculations have been performed for over 50 years for reactor physics and criticality safety applications. With today's faster computers, these calculations are being carried out to greater precision (smaller uncertainties) in k eff ; and detailed distributions of power and reaction rates are being computed routinely. This paper provides a review of the fundamental theory of Monte Carlo criticality calculations, with guidance on practical methods for: (1) assuring convergence of both k eff and the source distribution, (2) minimizing the bias in k eff and reaction rate distributions, and (3) dealing with the underprediction bias in uncertainties for k eff and reaction rate distributions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Hybrid and Parallel Domain-Decomposition Methods Development to Enable Monte Carlo for Reactor Analyses

This paper describes code and methods development at the Oak Ridge National Laboratory focused on enabling high-fidelity, large-scale reactor analyses with Monte Carlo (MC). Current state-of-the-art tools and methods used to perform ''real'' commercial reactor analyses have several undesirable features, the most significant of which is the non-rigorous spatial decomposition scheme. Monte Carlo methods, which allow detailed and accurate modeling of the full geometry and are considered the ''gold standard'' for radiation transport solutions, are playing an ever-increasing role in correcting and/or verifying the deterministic, multi-level spatial decomposition methodology in current practice. However, the prohibitive computational requirements associated with obtaining fully converged, system-wide solutions restrict the role of MC to benchmarking deterministic results at a limited number of state-points for a limited number of relevant quantities. The goal of this research is to change this paradigm by enabling direct use of MC for full-core reactor analyses. The most significant of the many technical challenges that must be overcome are the slow, non-uniform convergence of system-wide MC estimates and the memory requirements associated with detailed solutions throughout a reactor (problems involving hundreds of millions of different material and tally regions due to fuel irradiation, temperature distributions, and the needs associated with multi-physics code coupling). To address these challenges, our research has focused on the development and implementation of (1) a novel hybrid deterministic/MC method for determining high-precision fluxes throughout the problem space in k-eigenvalue problems and (2) an efficient MC domain-decomposition (DD) algorithm that partitions the problem phase space onto multiple processors for massively parallel systems, with statistical uncertainty estimation. The hybrid method development is based on an extension of the FW-CADIS method, which attempts to achieve uniform statistical uncertainty throughout a designated problem space. The MC DD development is being implemented in conjunction with the Denovo deterministic radiation transport package to have direct access to the 3-D, massively parallel discrete-ordinates solver (to support the hybrid method) and the associated parallel routines and structure. This paper describes the hybrid method, its implementation, and initial testing results for a realistic 2-D quarter core pressurized-water reactor model and also describes the MC DD algorithm and its implementation.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

An improved multilevel Monte Carlo method for estimating probability distribution functions in stochastic oil reservoir simulations

In this paper, we develop an improved multilevel Monte Carlo (MLMC) method for estimating cumulative distribution functions (CDFs) of a quantity of interest, coming from numerical approximation of large-scale stochastic subsurface simulations. Compared with Monte Carlo (MC) methods, that require a significantly large number of high-fidelity model executions to achieve a prescribed accuracy when computing statistical expectations, MLMC methods were originally proposed to significantly reduce the computational cost with the use of multifidelity approximations. The improved performance of the MLMC methods depends strongly on the decay of the variance of the integrand as the level increases. However, the main challenge in estimating CDFs is that the integrand is a discontinuous indicator function whose variance decays slowly. To address this difficult task, we approximate the integrand using a smoothing function that accelerates the decay of the variance. In addition, we design a novel a posteriori optimization strategy to calibrate the smoothing function, so as to balance the computational gain and the approximation error. The combined proposed techniques are integrated into a very general and practical algorithm that can be applied to a wide range of subsurface problems for high-dimensional uncertainty quantification, such as a fine-grid oil reservoir model considered in this effort. The numerical results reveal that with the use of the calibrated smoothing function, the improved MLMC technique significantly reduces the computational complexity compared to the standard MC approach. Finally, we discuss several factors that affect the performance of the MLMC method and provide guidance for effective and efficient usage in practice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A promising intersection of excited‐state‐specific methods from quantum chemistry and quantum Monte Carlo

Abstract We present a discussion of recent progress in excited‐state‐specific quantum chemistry and quantum Monte Carlo alongside a demonstration of how a combination of methods from these two fields can offer reliably accurate excited state predictions across singly excited, doubly excited, and charge transfer states. Both of these fields have seen important advances supporting excited state simulation in recent years, including the introduction of more effective excited‐state‐specific optimization methods, improved handling of complicated wave function forms, and ways of explicitly balancing the quality of wave functions for ground and excited states. To emphasize the promise that exists at this intersection, we provide demonstrations using a combination of excited‐state‐specific complete active space self‐consistent field theory, selected configuration interaction, and state‐specific variance minimization. These demonstrations show that combining excited‐state‐specific quantum chemistry and variational Monte Carlo can be more reliably accurate than either equation of motion coupled cluster theory or multi‐reference perturbation theory, and that it can offer new clarity in cases where existing high‐level methods do not agree. This article is categorized under: Electronic Structure Theory > Ab Initio Electronic Structure Methods Software > Quantum Chemistry

Otis, Leon↗

Influence of Alloying Elements and Effect of Stress on Anisotropic Hydrogen Diffusion in Zr-Based Alloys Predicted by Accelerated Kinetic Monte Carlo Simulations

The formation of hydrides degrades the toughness of Zr-based claddings, and thus is one of the primary concerns regarding cladding integrity during fuel operation and used fuel storage. However, the formation mechanism of hydrides, particularly the nucleation mechanism, is yet to be fully understood. To explore the nucleation process, atomic scale studies including density functional theory, molecular dynamics and kinetic Monte Carlo have been used to investigate H diffusion, segregation, and the possible nucleation paths of hydrides. Here, density functional theory calculations are used to parameterize a kinetic Monte Carlo model, which can accurately predict the effective H diffusivity in various Zr-based claddings including Zircaloy, Zirlo and Zr-2.5Nb. Assisted by density functional theory calculations, a recently developed charge-optimized-many-body potential is further improved and used to investigate the possible nucleation paths of hydrides. It’s shown that the formation of face-centered hydrides starts with coherent zeta-phase, shearing of which in the basal plane changes the hcp stacking into fcc and leads to the formation of gamma-hydride nuclei. The shearing involves a negligible barrier and negligible strain accumulation in the matrix by adopting three equivalent shear partials. The results obtained at the atomic scale are consistent with previous theory and experiments, and improves the current understanding on how and how fast hydride forms in Zr based cladding.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sign problem and Monte Carlo calculations beyond Lefschetz thimbles

We point out that Monte Carlo simulations of theories with severe sign problems can be profitably performed over manifolds in complex space different from the one with fixed imaginary part of the action (“Lefschetz thimble”). We describe a family of such manifolds that interpolate between the tangent space at one critical point (where the sign problem is milder compared to the real plane but in some cases still severe) and the union of relevant thimbles (where the sign problem is mild but a multimodal distribution function complicates the Monte Carlo sampling). As a result, we exemplify this approach using a simple 0+1 dimensional fermion model previously used on sign problem studies and show that it can solve the model for some parameter values where a solution using Lefschetz thimbles was elusive.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Implementation and testing of the on-the-fly thermal scattering Monte Carlo sampling method for graphite and light water in MCNP6

Here, a proper treatment of thermal neutron scattering requires accounting for chemical binding through a scattering law S(α,β,T). Monte Carlo codes sample the secondary neutron energy and angle after a thermal scattering event from probability tables generated from S(α,β,T) tables at discrete temperatures, requiring a large amount of data for multiscale and multiphysics problems with detailed temperature gradients. We have previously developed a method to handle this temperature dependence on-the-fly during the Monte Carlo random walk using polynomial expansions in 1/T to directly sample the secondary energy and angle. In this paper, the on-the-fly method is implemented into MCNP6 and tested in both graphite-moderated and light water-moderated systems. The on-the-fly method is compared with the thermal ACE libraries that come standard with MCNP6, yielding good agreement with integral reactor quantities like k-eigenvalue and differential quantities like single-scatter secondary energy and angle distributions. The simulation runtimes are comparable between the two methods (on the order of 5–15% difference for the problems tested) and the on-the-fly fit coefficients only require 5–15 MB of total data storage.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Dynamic load balancing for petascale quantum Monte Carlo applications: The Alias method

Diffusion Monte Carlo is the most accurate widely used Quantum Monte Carlo method for the electronic structure of materials, but it requires frequent load balancing or population redistribution steps to maintain efficiency and avoid accumulation of systematic errors on parallel machines. The load balancing step can be a significant factor affecting performance, and will become more important as the number of processing elements increases. We propose a new dynamic load balancing algorithm, the Alias Method, and evaluate it theoretically and empirically. An important feature of the new algorithm is that the load can be perfectly balanced with each process receiving at most one message. It is also optimal in the maximum size of messages received by any process. We also optimize its implementation to reduce network contention, a process facilitated by the low messaging requirement of the algorithm. Empirical results on the petaflop Cray XT Jaguar supercomputer at ORNL showing up to 30% improvement in performance on 120,000 cores. The load balancing algorithm may be straightforwardly implemented in existing codes. The algorithm may also be employed by any method with many near identical computational tasks that requires load balancing.

97 MATHEMATICS AND COMPUTING↗

STARlight: A Monte Carlo simulation program for ultra-peripheral collisions of relativistic ions

© 2016 Elsevier B.V. Ultra-peripheral collisions (UPCs) have been a significant source of study at RHIC and the LHC. In these collisions, the two colliding nuclei interact electromagnetically, via two-photon or photonuclear interactions, but not hadronically; they effectively miss each other. Photonuclear interactions produce vector meson states or more general photonuclear final states, while two-photon interactions can produce lepton or meson pairs, or single mesons. In these interactions, the collision geometry plays a major role. We present a program, STARlight, that calculates the cross-sections for a variety of UPC final states and also creates, via Monte Carlo simulation, events for use in determining detector efficiency. Program summary Program Title: STARlight (v2.2) Program Files doi: http://dx.doi.org/10.17632/xjpf4rxtbj.1 Licensing provisions: GNU GPLv3 Programming Language: C++ External Routines: PYTHIA 8.2 and DPMJET 3.0 are needed for some final states. Nature of problem: The cross-section for ultra-peripheral collisions is obtained by integrating the photon fluxes in transverse impact parameter space, subject to the requirement (which is also impact parameter dependent) that the colliding nuclei do not interact hadronically. The program is a two step process. First, it calculates the cross-sections for the reaction of interest, as a function of W (photon–Pomeron or two-photon center of mass energy), Y (final state rapidity) and pT (final state transverse momentum). Second, STARlight generates Monte Carlo events which can be used to determine cross-sections within specific kinematic constraints or for studies of detector efficiencies. The second step includes the decay of any unstable particles produced in the reaction, with appropriate consideration of particle spins and parity. It outputs these events in ASCII format. Solution method: The program generates a two dimensional look-up table of the production cross-section as a function of final state rapidity and mass. The dimensions of the table are selectable, allowing the user to choose the desired accuracy. For certain final states, a second two-dimensional look-up table, giving the transverse momentum distribution, as a function of rapidity, is also used. With these look-up tables, the program generates final states. Particle decays and the final angular distributions are calculated for each event. Restrictions: The program is focused on ultra-relativistic collisions at Brookhaven's RHIC (Relativistic Heavy Ion Collider) and CERN's LHC (Large Hadron Collider), with final states that are visible in a central detector. At lower energies (i.e., at the CERN SPS), caution should be exercised because STARlight does not account for the longitudinal momentum transfer to the nucleus; this is larger at low beam energies. References: http://starlight.hepforge.org and references in this article.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗