Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MEASURING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

The Recommendations for Linear Measurement Techniques on the Measurements of Nonlinear System Parameters of a Joint.

In the study of the dynamics of nonlinear systems, experimental measurements often convolute the response of the nonlinearity of interest and the effects of the experimental setup. To reduce the influence of the experimental setup on the deduction of the parameters of the nonlinearity, the response of a mechanical joint is investigated under various experimental setups. These experiments first focus on quantifying how support structures and measurement techniques affect the natural frequency and damping of a linear system. The results indicate that support structures created from bungees have negligible influence on the system in terms of frequency and damping ratio variations. The study then focuses on the effects of the excitation technique on the response for a linear system. The findings suggest that thinner stingers should not be used, because under the high force requirements the stinger bending modes are excited adding unwanted torsional coupling. The optimal configuration for testing the linear system is then applied to a nonlinear system in order to assess the robustness of the test configuration. Finally, recommendations are made for conducting experiments on nonlinear systems using conventional/linear testing techniques.

36 MATERIALS SCIENCE↗

Seven years of aerosol scattering hygroscopic growth measurements from SGP: Factors influencing water uptake: Aerosol Scattering Hygroscopic Growth

Long-term measurements of changes in the aerosol scattering coefficient hygroscopic growth at the U.S. Department of Energy Southern Great Plains site provide information on the seasonal as well as size and chemical dependence of aerosol hygroscopic growth. Annual average sub 10 um fRH values (the ratio of aerosol scattering at 85%/40% RH) were 1.75 and 1.87 for the gamma and kappa fit algorithms, respectively. The study found higher growth rates in the winter and spring seasons that correlated with high aerosol nitrate mass fraction. FRH, exhibited strong, but differing correlations with the scattering Ångström exponent and backscatter fraction, two optical size-dependent parameters. The aerosol organic fraction had a strong influence, with fRH decreasing with increases in the organic mass fraction and absorption Ångström exponent and increasing with the aerosol single scatter albedo. Uncertainty analysis if the fit algorithms revealed high uncertainty at low scattering coefficients and slight increases in uncertainty at high RH and fit parameters values.

Jefferson, A.↗

Machine Learning Methods for Connection RTT and Loss Rate Estimation Using MPI Measurements Under Random Losses

Scientific computations are expected to be increasingly distributed across wide-area networks, and Message Passing Interface (MPI) has been shown to scale to support their communications over long distances. Application-level measurements of MPI operations reflect the connection Round-Trip Time (RTT) and loss rate, and machine learning methods have been previously developed to estimate them under deterministic periodic losses. In this paper, we consider more complex, random losses with unform, Poisson and Gaussian distributions. We study five disparate machine leaning methods, with linear and non-linear, and smooth and non-smooth properties, to estimate RTT and loss rate over 10Gbps connections with 0-366ms RTT. The diversity and complexity of these estimators combined with the randomness of losses and TCP’s non-linear response together rule out the selection of a single best among them; instead, we fuse them to retain their design diversity. Overall, the results show that accurate estimates can be generated at low loss rates but become inaccurate at loss rates 10% and higher, thereby illustrating both their strengths and limitations.

Generalization Bounds↗

Measurement of Wγ and Zγ production in proton-proton collisions at $ \sqrt {s} = 7 $ TeV with the ATLAS detector

We present studies of W and Z bosons with associated high energy photons produced in pp collisions at √s = 7TeV. The analysis uses 35 pb -1 of data collected by the ATLAS experiment in 2010. The event selection requires W and Z bosons decaying into high p T leptons (electrons or muons) and a photon with E T > 15 GeV separated from the lepton(s) by a distance ΔR(l,γ) > 0.7 in η-Φ space. A total of 95 (97) pp → e ± νγ + X(pp → μ ± νγ + X) and 25 (23) pp → e + e - γ + X(pp → μ + μ - γ+X) event candidates are selected. The kinematic distributions of the leptons and photons and the production cross sections are measured. The data are found to agree with Standard Model predictions that include next-to-leading-order O(αα s ) contributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the inclusive isolated-photon cross section in pp collisions at $\sqrt{s}$ = 13 TeV using 36 fb -1 of ATLAS data

The differential cross section for isolated-photon production in pp collisions is measured at a centre-of-mass energy of 13 TeV with the ATLAS detector at the LHC using an integrated luminosity of 36.1 fb -1 . The differential cross section is presented as a function of the photon transverse energy in different regions of photon pseudorapidity. The differential cross section as a function of the absolute value of the photon pseudorapidity is also presented in different regions of photon transverse energy. Next-to-leading-order QCD calculations from Jetphox and Sherpa as well as next-to-next-to-leading-order QCD calculations from Nnlojet are compared with the measurement, using several parameterisations of the proton parton distribution functions. The predictions provide a good description of the data within the experimental and theoretical uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Convective Signals from Surface Measurements at ARM Tropical Western Pacific Site: Manus

The Madden-Julian Oscillation (MJO) signal has been detected using observations from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) Tropical Western Pacific (TWP). With downwelling shortwave radiative fluxes and fractional sky cover from the ACRF TWP Manus site, and the statistical tools of wavelet and spectrum power, we report finding major convective signals from surface observations spanning the period from 1996 to 2006. Our findings are confirmed with the satellite-retrieved values of precipitation from the Global Precipitation Climatology Project (GPCP), and interpolated outgoing longwave radiation (OLR) satellite measurements from the National Oceanic and Atmospheric Administration (NOAA) for the same location. Our results indicate that the MJO convective signal has a strong seasonal-to-interannual evolution that is likely correlated with the interannual variability of El Ni ˜no Southern Oscillation (ENSO).

Wang, Yi↗

New measurement of the 238 U decay constant with inductively coupled plasma mass spectrometry [New Measurement of the U-238 Decay Constant with Inductively Coupled Plasma Mass Spectrometry]

The 238 U decay constant (λ U-238 ) is fundamental to radioisotope-based chronometry in the Earth and planetary sciences, yet only a single published λ U-238 value (Jaffey et al. in Phys Rev C 4(5):1889–1906, 1971) is widely applied. We have determined λ U-238 via the novel approach of measuring of 234 Th ingrowth in high-purity 238U solutions, using isotope dilution mass spectrometry (ID-MS). The 234 Th decay constant (λ Th-234 ) was measured via decay counting with high-purity Ge (HPGe) $\gamma$ detectors. Preliminary results for λ U-238 agree with the value determined by $a$-counting [1] within the elevated uncertainty of 0.462% (k = 2). Ongoing efforts to reproduce λ U-238 with reduced experimental uncertainties will inform future conclusions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Measurement of Sn and In Solidification Undercooling and Lattice Expansion Using in situ x-ray diffraction

Undercooling of low melting point metals, Sn and In, on graphite, Cu, and Au-coated Cu surfaces is examined using an in-situ x-ray diffraction technique. Undercoolings of up to 56.1 C were observed for Sn solidified on graphite, which is a non-wetting substrate, while lower undercoolings were observed for Sn of 17.3 C on Au/Ni/Cu and 10.5 C on Cu surfaces. Indium behaved quite differently, showing undercoolings of less than 4 C on all three substrates. In addition, lattice expansion/contraction behavior of Sn, In and intermetallic compounds (IMCs) that formed during the reaction of Sn with the Au/Ni/Cu surface were measured. Results showed anisotropic and non-linear expansion of both Sn and In, with a contraction, rather than expansion, of the basal planes of In during heating. The principal IMC that formed between Sn and the Au/Ni/Cu surface was characterized as CuSn and had an average expansion coefficient of 13.6x10-6/ C, which is less than that of Sn or Cu.

36 MATERIALS SCIENCE↗

Measuring color memory in a color glass condensate at electron–ion colliders

The color memory effect is the non-abelian gauge theory analog of the gravitational memory effect, in which the passage of color radiation induces a net relative SU(3) color rotation of a pair of nearby quarks. It is proposed that this effect can be measured in the Regge limit of deeply inelastic scattering at electron–ion colliders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Composition, stability, and measurement of reduced uranium phases for groundwater bioremediation at Old Rifle, CO

Reductive biostimulation is currently being explored as a possible remediation strategy for uranium (U) contaminated groundwater, and is currently being investigated at a field site in Rifle, CO, USA. The long-term stability of the resulting U(IV) phases is a key component of the overall performance and depends upon a variety of factors, including rate and mechanism of reduction, mineral associations in the subsurface, and propensity for oxidation. To address these factors, several approaches were used to evaluate the redox sensitivity of U: measurement of the rate of oxidative dissolution of biogenic uraninite (UO{sub 2(s)}) deployed in groundwater at Rifle, characterization of a zone of natural bioreduction exhibiting relevant reduced mineral phases, and laboratory studies of the oxidative capacity of Fe(III) and reductive capacity of Fe(II) with regard to U(IV) and U(VI), respectively.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simple and Inexpensive Method of Wood Pellets Macro-porosity Measurement

A novel simplified stereometric measurement method for determining the macro-porosity of wood pellets through geometrical approach was successfully developed and tested. The irregular ends of pellets of circular cross-section were sanded flat so that their geometry becomes cylinder and their volumes evaluated using mensuration formula. Such formed cylindrical pellets were loose or tap filled to selected volumes to evaluate the macro-porosity and the constant specific weight. The method was extended to evaluate actual wood pellets properties. Overall macro-porosity of actual wood pellets was determined as 41.0±2.5% and 35.5±2.7%, mean bulk density as and , and classified as “Class-3:Medium” and “Class-3&4:Medium to Low” for loose and tapped fills, respectively. Hausner ratio and Carr’s compressibility index classify wood pellets as “freely flowing.” The developed stereometric method can be used as a handy inexpensive laboratory procedure to estimate the macro-porosity of different types and makes of wood pellets and other similar packaged materials.

09 BIOMASS FUELS↗

Environmental chamber measurements of mercury flux from coal utilization by-products

An environmental chamber was constructed to measure the mercury flux from coal utilization by-product (CUB) samples. Samples of fly ash, FGD gypsum, and wallboard made from FGD gypsum were tested under both dark and illuminated conditions with or without the addition of water to the sample. Mercury releases varied widely, with 7-day experiment averages ranging from -6.8 to 73 ng/m2 h for the fly ash samples and -5.2 to 335 ng/m2 h for the FGD/wallboard samples. Initial mercury content, fly ash type, and light exposure had no observable consistent effects on the mercury flux. For the fly ash samples, the effect of a mercury control technology was to decrease the emission. For three of the four pairs of FGD gypsum and wallboard samples, the wallboard sample released less (or absorbed more) mercury than the gypsum.

20 FOSSIL-FUELED POWER PLANTS↗

Strontium and Barium Isotopes in Presolar Silicon Carbide Graines Measured with CHILI-Two Types of X Grains.

We used CHILI, the Chicago Instrument for Laser Ionization, a new resonance ionization mass spectrometer developed for isotopic analysis of small samples, to analyze strontium, zirconium, and barium isotopes in 22 presolar silicon carbide grains. Twenty of the grains showed detectable strontium and barium, but none of the grains had enough zirconium to be detected with CHILI. Nine grains were excluded from further consideration since they showed very little signals (<1000 counts) for strontium as well as for barium. Among the 11 remaining grains, we found three X grains. The discovery of three supernova grains among only 22 grains was fortuitous, because only similar to 1% of presolar silicon carbide grains are type X, but was confirmed by silicon isotopic measurements of grain residues with NanoSIMS. While one of the X grains showed strontium and barium isotope patterns expected for supernova grains, the two other supernova grains have Sr-87/Sr-86 <0.5, values never observed in any natural sample before. From their silicon isotope ratios, the latter two grains can be classified as X2 grains, while the former grain belongs to the more common X1 group. The differences of these grains in strontium and barium isotopic composition constrain their individual formation conditions in Type II supernovae. (C) 2017 Elsevier Ltd. All rights reserved.

barium isotopes↗