Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Characterization of rhenium oxide films and their application to liquid crystal cells

Rhenium trioxide exhibits high electronic conductivity, while its open cubic crystal structure allows an appreciable hydrogen intercalation, generating disordered solid phases, with protonic conductivity. Rhenium oxide thin films have been obtained by thermal evaporation of ReO{sub 3} powders on different substrates, maintained at different temperatures, and also by reactive magnetron sputtering of a Re metallic target. A comparative investigation has been carried out on these films, by using micro-Raman spectroscopy and x-ray diffraction. Two basic types of solid phases appear to grow in the films: a red metallic H{sub x}ReO{sub 3} compound, with distorted perovskite structures, like in the bulk material, and ordered HReO{sub 4} crystals based on tetrahedral perrhenate ions. Because of its conduction properties, the electrical and electro-optical behaviors of ReO{sub 3} films deposited on standard indium tin oxide/glass substrate have been tested inside asymmetric nematic liquid crystal cells, showing an appreciable capability of rectification of their electro-optical response, in similar way to tungsten trioxide.

36 MATERIALS SCIENCE↗

Synergy on catalytic effect of Fe-Zr additives mixed in different proportions on the hydrogen desorption from MgH{sub 2}

Mg films with mixed Fe and Zr metallic additives were prepared by rf magnetron sputtering keeping the total metal content constant, about 7 at. %, and changing the [Fe]/[Zr] ratio. Isothermal hydrogen desorption curves showed that the kinetics depends on [Fe]/[Zr] ratio and is fastest when the [Fe]/[Zr] ratio is {approx}1.8. X-ray diffraction analysis revealed formation of Fe nanoclusters and Mg grain refinement. The improvement of the hydrogen desorption kinetics can be explained by the presence of atomically dispersed Zr and Fe nanoclusters acting as nucleation centers, as well as Mg grain refinement.

36 MATERIALS SCIENCE↗

Silicon-rich SiO{sub 2}/SiO{sub 2} multilayers: A promising material for the third generation of solar cell

Si-rich-SiO{sub 2}(SRSO)/SiO{sub 2} multilayers (MLs) have been grown by reactive magnetron sputtering. The presence of silicon nanoclusters (Si-ncls) within the SRSO sublayer and annealing temperature influence optical absorption as well as photoluminescence. The optimized annealing temperature has been found to be 1100 deg. C, which allows the recovery of defects and thus enhances photoluminescence. Four MLs with Si-ncl size ranging from 1.5 to 8 nm have been annealed using the optimized conditions and then studied by transmission measurements. Optical absorption has been modeled so that a size effect in the linear absorption coefficient alpha (in cm{sup -1}) has been evidenced and correlated with TEM observations. It is demonstrated that amorphous Si-ncl absorption is fourfold higher than that of crystalline Si-ncls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Top-emission Si-based phosphor organic light emitting diode with Au doped ultrathin n-Si film anode and bottom Al mirror

We report a highly efficient top-emission Si-based phosphor organic light emitting diode (PhOLED) with an ultrathin polycrystalline n-Si:Au film anode and a bottom Al mirror. This anode is formed by magnetron sputtering followed by Ni induced crystallization and then Au diffusion. By optimizing the thickness of the n-Si:Au film anode, the Au diffusion temperature, and the other parameters of the PhOLED, the highest current and power efficiencies of the n-Si:Au film anode PhOLED reached 85{+-}9 cd/A and 80{+-}8 lm/W, respectively, corresponding to an external quantum efficiency of 21{+-}2% and a power conversion efficiency of 15{+-}2%, respectively, which are about 60% and 110% higher than those of the indium tin oxide anode counterpart and 70% and 50% higher than those of the bulk n{sup +}-Si:Au anode counterpart, respectively.

36 MATERIALS SCIENCE↗

Mg doping of thermochromic VO{sub 2} films enhances the optical transmittance and decreases the metal-insulator transition temperature

Thermochromic films of Mg{sub x}V{sub 1-x}O{sub 2} were made by reactive dc magnetron sputtering onto heated glass. The metal-insulator transition temperature decreased by {approx}3 K/at. %Mg, while the optical transmittance increased concomitantly. Specifically, the transmittance of visible light and of solar radiation was enhanced by {approx}10% when the Mg content was {approx}7 at. %. Our results point at the usefulness of these films for energy efficient fenestration.

36 MATERIALS SCIENCE↗

Descriptions of a linear device developed for research on advanced plasma imaging and dynamics

The research on advanced plasma imaging and dynamics (RAPID) device is a newly developed linear electron cyclotron resonance (ECR) plasma device. It has a variety of axial magnetic field profiles provided by eight water-cooled magnetic coils and two dc power supplies. The positions of the magnetic coils are freely adjustable along the axial direction and the power supplies can be operated with many combinations of electrical wiring to the coils. A 6 kW 2.45 GHz magnetron is used to produce steady-state ECR plasmas with central magnetic fields of 875 and/or 437.5 G (second harmonic). The cylindrical stainless steel vacuum chamber is 300 mm in diameter and 750 mm in length and has eight radial and ten axial ports including 6-in. and 8-in. viewing windows for heating and diagnostics. Experimental observation of ECR plasma heating has been recently carried out during the initial plasma operation. The main diagnostic systems including a 94 GHz heterodyne interferometer, a high-resolution 25 channel one-dimensional array spectrometer, a single channel survey spectrometer, and an electric probe have been also prepared. The RAPID device is a flexible simulator for the understanding of tokamak edge plasma physics and new diagnostic system development. In this work, we describe the RAPID device and initial operation results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of misfit strain and surface roughness on the tunable dielectric behavior of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films

The effect of substrate temperature on the crystallographic texture and surface morphology of Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} deposited by rf magnetron sputtering on (111) oriented Pt (150 nm)/Ti (10 nm)/SiO{sub 2} (300 nm)/Si (100) substrates is reported. The onset of crystallinity is observed above 500 deg. C, beyond which all films are oriented along the (111) plane up to a temperature of 800 deg. C. Over this temperature range, the misfit strain and root mean square roughness (rms{sub roughness}) peak at 600 deg. C, decreasing beyond this peak value. The tunability of the dielectric constant at 100 kHz is highest (60% for a field strength of 300 kV/cm) at the lowest values of rms{sub roughness} and misfit strain and decreases as these values increase. It is also shown that the morphology of the Pt underlayers is strongly affected by the processing conditions. This in turn influences the tunable behavior of the BST films as much as the substrate temperature during growth and the consequent microstructural variations.

36 MATERIALS SCIENCE↗

Cosputtered Mn-doped Si thin films studied by x-ray spectroscopy

Substitutionally doped Si{sub 1-x}Mn{sub x} thin films were fabricated by a magnetron cosputtering method at a low growth temperature. X-ray absorption fine structure (XAFS) and x-ray diffraction (XRD) techniques were used to investigate the structures of the Si{sub 1-x}Mn{sub x} thin films. The XRD results exhibit that no secondary phases such as metallic Mn or Mn-Si compound can be detected. The detailed analysis of the extended XAFS together with the x-ray absorption near-edge structure spectra at the Mn K-edge unambiguously reveals that the doped Mn atoms are incorporated into the Si matrix and substitute for the Si sites in the Si lattice. The results clearly indicate that the Mn occupations in silicon thin films are quite sensitive to the growth conditions and the postannealing treatment.

36 MATERIALS SCIENCE↗

Glow plasma trigger for electron cyclotron resonance ion sources

Electron cyclotron resonance ion sources (ECRISs) are particularly useful for nuclear, atomic, and high energy physics, as unique high current generators of multicharged ion beams. Plasmas of gas discharges in an open magnetic trap heated by pulsed (100 {mu}s and longer) high power (100 kW and higher) high-frequency (greater than 37.5 GHz) microwaves of gyrotrons is promising in the field of research in the development of electron cyclotron resonance sources for high charge state ion beams. Reaching high ion charge states requires a decrease in gas pressure in the magnetic trap, but this method leads to increases in time, in which the microwave discharge develops. The gas breakdown and microwave discharge duration becomes greater than or equal to the microwave pulse duration when the pressure is decreased. This makes reaching the critical plasma density initiate an electron cyclotron resonance (ECR) discharge during pulse of microwave gyrotron radiation with gas pressure lower than a certain threshold. In order to reduce losses of microwave power, it is necessary to shorten the time of development of the ECR discharge. For fast triggering of ECR discharge under low pressure in an ECRIS, we initially propose to fill the magnetic trap with the plasmas of auxiliary pulsed discharges in crossed ExB fields. The glow plasma trigger of ECR based on a Penning or magnetron discharge has made it possible not only to fill the trap with plasma with density of 10{sup 12} cm{sup -3}, required for a rapid increase in plasma density and finally for ECR discharge ignition, but also to initially heat the plasma electrons to T{sub e}{approx_equal}20 eV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure-property relationship of nanocrystalline Pr{sub 2}Co{sub 14}B-based hard magnetic film

Nanocrystalline Pr{sub 2}Co{sub 14}B-based films are deposited on two types of substrates at 600 deg. C by radio frequency magnetron sputtering. All samples are composed of a hard magnetic phase Pr{sub 2}Co{sub 14}B and a small amount of a soft magnetic phase Co{sub 3}B. The film sputtered on the thermally oxidized silicon wafer has a more dispersed distribution of Co{sub 3}B and a smaller average grain size of Pr{sub 2}Co{sub 14}B than that deposited on alumina substrates; therefore, the former film shows a stronger intergrain exchange coupling action (IECA) than the latter film. In addition, the coercivity (8.6 kOe) and ratio (0.68) of remanence to saturation magnetization of the film sputtered on thermally oxidized silicon wafers are considerably higher than those (0.4 kOe and 0.56) of the film deposited on alumina substrates. In the case of the film sputtered on alumina substrates, the size of most magnetic domains is comparable to the average grain size of magnetic phases, implying the occurrence of a weak IECA. However, in the case of the film sputtered on thermally oxidized silicon wafers, the size of most magnetic domains is considerably larger than the mean grain size of magnetic phases, indicating the occurrence of a strong IECA. The effect of the IECA on the coercivity of specimens is determined by analyzing the temperature dependence of coercivity in the framework of a nucleation model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design and construction of a compact microwave proton source for a proton linac

A 100 MeV, 20 mA proton linear accelerator is being developed by the Proton Engineering Frontier Project at the Korea Atomic Energy Research Institute. 20 MeV acceleration system using radio frequency quadrupole and drift tube linac was already developed and has been tested. To operate this acceleration system with a long time, more reliable proton source is needed. A compact microwave proton source was proposed and has been designed and constructed as a prototype ion source for the 100 MeV proton linear accelerator. The design of microwave power injection system is based on the microwave proton injector at LANL and CEA. The wave power from a 2.45 GHz, 2 kW magnetron source is introduced into a compact plasma chamber with 7 cm diameter and 5 cm length through a standard tapered, double-ridged waveguide (WRD250) and a quartz window. The microwave power supply is installed on high voltage platform. Axial magnetic fields up to 1 kG can be provided with a water-cooled solenoid coil. A single-hole three electrode extraction system is designed for an extraction current up to 30 mA at a 50 kV extraction voltage. The design and initial operations of the proton source are presented.

43 PARTICLE ACCELERATORS↗

Customizing electron confinement in plasma-assembled Si/AlN nanodots for solar cell applications

Size-uniform Si nanodots (NDs) are synthesized on an AlN buffer layer at low Si(111) substrate temperatures using inductively coupled plasma-assisted magnetron sputtering deposition. High-resolution electron microscopy reveals that the sizes of the Si NDs range from 9 to 30 nm. Room-temperature photoluminescence (PL) spectra indicate that the energy peak shifts from 738 to 778 nm with increasing the ND size. In this system, the quantum confinement effect is fairly strong even for relatively large (up to 25 nm in diameter) NDs, which is promising for the development of the next-generation all-Si tandem solar cells capable of effectively capturing sunlight photons with the energies between 1.7 (infrared: large NDs) and 3.4 eV (ultraviolet: small NDs). The strength of the resulting electron confinement in the Si/AlN ND system is evaluated and justified by analyzing the measured PL spectra using the ionization energy theory approximation.

36 MATERIALS SCIENCE↗

Velocity distribution function of sputtered Cu atoms obtained by time resolved optical absorption spectroscopy

A new method based on time resolved optical absorption spectroscopy is proposed to determine the velocity distribution function of sputtered Cu atoms in a magnetron plasma discharge. The method consists of applying a short pulse of 1.5 {mu}s and of recording time variations in copper atom density in off pulse at different positions (1, 2, and 3 cm) from target surface under 3-30 mTorr. The time evolution of the density is then converted into velocity distribution. We estimate that only sputtered atoms with radial velocity component lower than 0.5 km/s are detected. The average velocity of Cu atoms is evaluated as the first order moment of the velocity distribution functions. The velocity distribution functions become the more dispersive the farther from target surface. The average velocities vary in the range of 2.5-3 km/s at the vicinity of target surface whereas at 3 cm a decrease from 2.5 to 1.2 km/s is observed at 30 mTorr.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Temperature Dependent Thermal Conductivity of Si/SiC Amorphous Multilayer Films

The cross-plane thermal conductivity of 22 nm period Si/SiC amorphous multilayer films deposited by magnetron sputtering and measured using a differential 3{omega} method was found to decrease from 2.0 W/mK at 300 K to 1.1 W/mK at 80 K. Structural disorder in each of the constituent layers of the amorphous multilayer films was confirmed by high resolution transmission electron microscopy. Estimations of the relative contributions of interface and intrinsic layer thermal resistance based on microscopic phonon transport models indicate that mean free path reductions induced by the structural disorder within the multilayer films are responsible for the observed experimental trends.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High density flux of Co nanoparticles produced by a simple gas aggregation apparatus

Gas aggregation is a well known method used to produce clusters of different materials with good size control, reduced dispersion, and precise stoichiometry. The cost of these systems is relatively high and they are generally dedicated apparatuses. Furthermore, the usual sample production speed of these systems is not as fast as physical vapor deposition devices posing a problem when thick samples are needed. In this paper we describe the development of a multipurpose gas aggregation system constructed as an adaptation to a magnetron sputtering system. The cost of this adaptation is negligible and its installation and operation are both remarkably simple. The gas flow for flux in the range of 60-130 SCCM (SCCM denotes cubic centimeter per minute at STP) is able to completely collimate all the sputtered material, producing spherical nanoparticles. Co nanoparticles were produced and characterized using electron microscopy techniques and Rutherford back-scattering analysis. The size of the particles is around 10 nm with around 75 nm/min of deposition rate at the center of a Gaussian profile nanoparticle beam.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic and optical properties of nanocorrugated Co films

Nanostructured Co films were prepared on the top of a polymethyl methacrylate (PMMA) colloidal crystals by magnetron sputtering. Optical reflectance spectra were studied in the range of near UV, IR, and visible light for p- and s-polarizations. Valleys were observed in the spectra and their positions scaled with the PMMA sphere diameter. Both the surface plasmon resonance and the dipole resonance of single Co nanocaps should be considered to explain the obtained results. Magneto-optic measurements showed the qualitative change of the magnetization curve and the enhancement of magneto-optic rotation at wavelength lambda=632 nm in comparison with the control Co film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High thermal stability and low electrical resistivity carbon-containing Cu film on barrierless Si

Interfacial structures and electrical resistivities of a carbon-doped Cu film at different annealing temperatures and times were investigated. The film was prepared by magnetron sputtering on barrierless silicon. After annealing, grain growth was distinctly hindered and a carbon-containing nanometer thick passive amorphous layer was formed at the film/substrate interface. The film had a resistivity of about 2.7 muOMEGA cm after annealing at 400 deg. C for 1 h and maintained a low resistivity of 3.8 muOMEGA cm even after 9 h annealing at 400 deg. C. The low electrical resistivity in combination with the high thermal stability makes carbon doping a promising technique for future Cu interconnects on barrierless Si.

36 MATERIALS SCIENCE↗

Persistent photoconductivity due to trapping of induced charges in Sn/ZnO thin film based UV photodetector

Photoconductivity relaxation in rf magnetron sputtered ZnO thin films integrated with ultrathin tin metal overlayer is investigated. Charge carriers induced at the ZnO-metal interface by the tin metal overlayer compensates the surface lying trap centers and leads to the enhanced photoresponse. On termination of ultraviolet radiation, recombination of the photoexcited electrons with the valence band holes leaves the excess carriers deeply trapped at the recombination center and holds the dark conductivity level at a higher value. Equilibrium between the recombination centers and valence band, due to trapped charges, eventually stimulates the persistent photoconductivity in the Sn/ZnO photodetectors.

36 MATERIALS SCIENCE↗