Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Locating Profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Robust, sub-angstrom level mid-spatial frequency profilometry

A noncontacting measurement approach is presented that involves the measurement of the local curvature of the test piece by simultaneously measuring its slope at two slightly displaced locations. As the sensing beams are scanned along the test piece, a profile of curvature is built, from which the height profile is deduced by double integration. The sensing of curvature eliminates the need for a reference surface, and makes the approach insensitive to all types of vibration and drift, both in surface height and in surface slope. The approach is considered to be well suited to measuring grazing incidence optics with highly different transverse and longitudinal radii of curvature. Implementation features including a steering mirror and a movable detector provide for servo tracking of test pieces as fast as F-0.5, with radii as small as 20 mm (convex or concave).

Glenn, Paul↗

An evolving MHD vortex street model for quasi-periodic solar wind fluctuations

Magnetohydrodynamic (MHD) simulation are used to provide a dynamical basis for the 'vortex street' model of the quasi-periodic meridional flow observed by Voyager 2 in the outer heliosphere. Various observations suggest the existence near the current sheet at solar minimum, of a vorticity distribution of two opposite shear layers with an antisymmetric staggered velocity pattern due to structured high-speed wind surrounding low-speed equatorial flow. It is shown that this flow pattern leads to the formation of a highly stable vortex street through the nonlinear interaction of the two shear layers. Spatial profiles of various simulated parameters (velocity, density, meridional flow angle and the location of magnetic sector boundaries) and their relative locations in the quasi-steady vortex street are generally in good agreement with the observations.

Siregar, Edouard↗

The Triton: Design concepts and methods

During the design of the C & P Aerospace Triton, a few problems were encountered that necessitated changes in the configuration. After the initial concept phase, the aspect ratio was increased from 7 to 7.6 to produce a greater lift to drag ratio (L/D = 13) which satisfied the horsepower requirements (118 hp using the Lycoming O-235 engine). The initial concept had a wing planform area of 134 sq. ft. Detailed wing sizing analysis enlarged the planform area to 150 sq. ft., without changing its layout or location. The most significant changes, however, were made just prior to inboard profile design. The fuselage external diameter was reduced from 54 to 50 inches to reduce drag to meet the desired cruise speed of 120 knots. Also, the nose was extended 6 inches to accommodate landing gear placement. Without the extension, the nosewheel received an unacceptable percentage (25 percent) of the landing weight. The final change in the configuration was made in accordance with the stability and control analysis. In order to reduce the static margin from 20 to 13 percent, the horizontal tail area was reduced from 32.02 to 25.0 sq. ft. The Triton meets all the specifications set forth in the design criteria. If time permitted another iteration of the calculations, two significant changes would be made. The vertical stabilizer area would be reduced to decrease the aircraft lateral stability slope since the current value was too high in relation to the directional stability slope. Also, the aileron size would be decreased to reduce the roll rate below the current 106 deg/second. Doing so would allow greater flap area (increasing CL(sub max)) and thus reduce the overall wing area. C & P would also recalculate the horsepower and drag values to further validate the 120 knot cruising speed.

Meholic, Greg↗

The early ultraviolet spectral evolution of Nova Cygni 1992

We report on the high resolution ultraviolet line profile evolution of Nova Cygni 1992 using the International Ultraviolet Explorer (IUE) satellite and the Goddard High Resolution Spectrograph (GHRS) on the Hubble Space Telescope (HST). Our observations cover the period from discovery in 1992 February through 1993 April. The initial expansion velocity, derived from P Cyg profiles on Mg II and other resonance lines, was about 4500 km/s. All resonance transitions displayed P Cyg profiles around the time of UV maximum. We first discuss the spectral development as the initially optically thick atomic absorption curtain became optically thin. We then present the interpretation of the nebular spectral stage. The high resolution line profiles show that the shell rapidly developed nearly symmetric knots, or filaments, of emission. The optically thin transitions show an emission weighted expansion velocity of about 1800 km/s, consistent with the velocity inferred from the radio and infrared data. The emission lines display a symmetric set of filaments that appeared as soon as the line profiles became optically thin. The GHRS observations demonstrate that the filaments were located in the inner, slower moving parts of the ejecta. These probably record an initial low wave number instability imposed on the ejecta at the time of outburst. We suggest that the likely cause is a Rayleigh-Taylor instability. The emission at later stages is dominated by the filaments and, since this phenomenon is seen in virtually all novae, nebular line formation codes will have to account for the density inhomgeneities in order to adequately determine abundances for nove ejecta.

Shore, Steven N.↗

Methanol and hydrogen sulfide in comet P/Halley

The Neutral Mass Spectrometer on the Giotto spacecraft measured the gas and ion composition in the coma of comet P/Halley. A detailed model of the ion chemistry inside the contact surface located at 4660 km is used to interpret the measured ion desnity profiles in the 32 to 35 amu/e mass range. The masses 33 and 35 amu/e are dominated by the protonated methanol and hydrogen sulfide ions CH3OH2(+) and H3S(+). Both profiles are essentially compatible with CH3OH and H2S originating from the nucleus only. The production rates relative to water are Y(CH3OH) = Q(CH3OH)/Q(H2O) = 1.7% and Y(H2S) = 0.41%. Our Y(CH3OH) agrees well with a determination from IR spectra obtained about 6 weeks after the Giotto encounter with P/Halley. In 7 other comets IR and microwave observations give Y(CH3OH) values between about 0.7 and 6%, indicating that the methanol abundance shows a strong variability from comet to comet. In three other comets Y(H2S) values between 0.2 and 0.5% have been reported. In addition to H2S(+), only ions containing minor isotopes of H, C, O and S contribute to mass 34 amu/e (e.g. (34)S(+), (13)CH3OH2(+), CH4DO(+)). These contributions can be calculated from the measured densities of the ions containing the major isotopes and the H2S(+) contribution from the measured H3S(+) density. From mass 34 amu/e we can also derive an upper limit of 1% for the abundance of deuterated methanol. This limit is at most marginally compatible with a direct interstellar origin of the CH3OH in P/Halley as the measured interstellar abundance of deuterated methanol is 1 to 6%.

Eberhardt, P.↗

TES Carbon Monoxide Validation during the Two AVE Campaigns using the Argus and ALIAS Instruments on NASA's WB-57F

The Aura Validation Experiment (AVE) focuses on validating Aura satellite measurements of important atmospheric trace gases using ground-based, aircraft, and balloon-borne instruments. Global satellite observations of CO from the Tropospheric Emission Spectrometer (TES) on the EOS Aura satellite have been ongoing since September 2004. This paper discusses CO validation experiments during the Oct-AVE (2004 Houston, Texas) and CR-AVE (2006 San Jose, Costa Rica) campaigns. The coincidences in location and time between the satellite observations and the available in situ profiles for some cases are not ideal. However, the CO distribution patterns in the two validation flight areas are shown to have very little variability in the aircraft and satellite . observations, thereby making them suitable for validation comparisons. TES CO profiles, which typically have a retrieval uncertainty of 10-20%, are compared with in situ CO measurements from NASA Ames Research Center's Argus instrument taken on board the WB-57F aircraft during Oct-AVE. TES CO retrievals during CR-AVE are compared with in situ measurements from Jet Propulsion Laboratory's Aircraft Laser Infrared Absorption Spectrometer (ALIAS) instrument as well as with the Argus instrument, both taken on board the WB-57F aircraft. During CR-AVE, the average overall difference between ALIAS and Argus CO was 4%, with the ALIAS measurement higher. During individual flights, 2-min time-averaged differences between the two in situ instruments had standard deviation of 14%. The TES averaging kernels and a priori constraint profiles for CO are applied to the in situ data for proper comparisons to account for the reduced vertical resolution and the influence of the a priori in the satellite-derived profile. In the TES sensitive pressure range, approx.700-200 hPa, the in situ profiles and TES profiles agree within 5-10%, less than the variability in CO distributions obtained by both TES and the aircraft instruments in the two regions. TES CO is slightly lower than in situ measurements in the Houston area (midlatitudes) and slightly higher than in situ CO measurements in the Costa Rica region (tropical).

Lopez, Jinena P.↗

Flight Test Results from the Rake Airflow Gage Experiment on the F-15B Aircraft

The Rake Airflow Gage Experiment was flown on the Propulsion Flight Test Fixture at NASA Dryden Flight Research Center using one of Dryden s F-15B research testbed aircraft. Propulsion Flight Test Fixture is a modular, pylon-based platform for flight testing propulsion system components, such as the Channeled Centerbody Inlet Experiment, an innovative, variable-geometry, mixed compression supersonic inlet under development at NASA Dryden. The objective of this flight test was to ascertain the flowfield angularity and local Mach number profile of the aerodynamic interface plane that is defined by the planned location of the tip of the inlet centerbody. Knowledge of the flowfield characteristics at this location underneath will be essential to computational modeling of the new inlet as well as future propulsion systems flight testing using the test fixture. This paper describes the preparation for and execution of the flight test, as well as results and validation of the algorithm used to calculate local Mach number and angularity from the rake's pressure measurements.

Flynn, Darin C.↗

Wind-US Results for the AIAA 1st Propulsion Aerodynamics Workshop

This presentation contains Wind-US results presented at the 1st Propulsion Aerodynamics Workshop. The The workshop was organized by the American Institute of Aeronautics and Astronautics, Air Breathing Propulsion Propulsion Systems Integration Technical Committee with the purpose of assessing the accuracy of computational computational fluid dynamics for air breathing propulsion applications. Attendees included representatives from representatives from government, industry, academia, and commercial software companies. Participants were were encouraged to explore and discuss all aspects of the simulation process including the effects of mesh type and mesh type and refinement, solver numerical schemes, and turbulence modeling. The first set of challenge cases involved computing the thrust and discharge coefficients for a series of convergent convergent nozzles for a range of nozzle pressure ratios between 1.4 and 7.0. These configurations included a included a reference axisymmetric nozzle as well as 15deg , 25deg , and 40deg conical nozzles. Participants were also asked also asked to examine the plume shock structure for two cases where the 25deg conical nozzle was bifurcated by a bifurcated by a solid plate. The final test case was a serpentine inlet diffuser with an outlet to inlet area ratio of 1.52 ratio of 1.52 and an offset of 1.34 times the inlet diameter. Boundary layer profiles, wall static pressure, and total and total pressure at downstream rake locations were examined.

Yoder, Dennis↗

Silicon Micromachined Microlens Array for THz Antennas

5 5 silicon microlens array was developed using a silicon micromachining technique for a silicon-based THz antenna array. The feature of the silicon micromachining technique enables one to microfabricate an unlimited number of microlens arrays at one time with good uniformity on a silicon wafer. This technique will resolve one of the key issues in building a THz camera, which is to integrate antennas in a detector array. The conventional approach of building single-pixel receivers and stacking them to form a multi-pixel receiver is not suited at THz because a single-pixel receiver already has difficulty fitting into mass, volume, and power budgets, especially in space applications. In this proposed technique, one has controllability on both diameter and curvature of a silicon microlens. First of all, the diameter of microlens depends on how thick photoresist one could coat and pattern. So far, the diameter of a 6- mm photoresist microlens with 400 m in height has been successfully microfabricated. Based on current researchers experiences, a diameter larger than 1-cm photoresist microlens array would be feasible. In order to control the curvature of the microlens, the following process variables could be used: 1. Amount of photoresist: It determines the curvature of the photoresist microlens. Since the photoresist lens is transferred onto the silicon substrate, it will directly control the curvature of the silicon microlens. 2. Etching selectivity between photoresist and silicon: The photoresist microlens is formed by thermal reflow. In order to transfer the exact photoresist curvature onto silicon, there needs to be etching selectivity of 1:1 between silicon and photoresist. However, by varying the etching selectivity, one could control the curvature of the silicon microlens. The figure shows the microfabricated silicon microlens 5 x5 array. The diameter of the microlens located in the center is about 2.5 mm. The measured 3-D profile of the microlens surface has a smooth curvature. The measured height of the silicon microlens is about 280 microns. In this case, the original height of the photoresist was 210 microns. The change was due to the etching selectivity of 1.33 between photoresist and silicon. The measured surface roughness of the silicon microlens shows the peak-to-peak surface roughness of less than 0.5 microns, which is adequate in THz frequency. For example, the surface roughness should be less than 7 microns at 600 GHz range. The SEM (scanning electron microscope) image of the microlens confirms the smooth surface. The beam pattern at 550 GHz shows good directivity.

Lee, Choonsup↗

Tests of the XP-46 Airplane in the N.A.C.A. Full-Scale Wind Tunnel

An investigation has been conducted on a full-scale model of the proposed XP-46 airplane in the N. A. C. A. full-scale wind tunnel pursuant to the request of the Amy Air Corps, Materiel Division. The primary purpose of the investigation was to determine the optimum arrangement of the various component parts to obtain the maximum high speed and to provide adequate engine cooling. Additional tests included a determination of the stalling characteristics and the effectiveness of ailerons and elevators. The profile drag of the wing was ascertained by the momentum method; the location of the transition point on the wing and the critical compressibility velocities of the various airplane components were determined from surface pressure surveys.

Nickle, F. R.↗

Evaluation of Variable-Depth Liner Configurations for Increased Broadband Noise Reduction

This paper explores the effects of variable-depth geometry on the amount of noise reduction that can be achieved with acoustic liners. Results for two variable-depth liners tested in the NASA Langley Grazing Flow Impedance Tube demonstrate significant broadband noise reduction. An impedance prediction model is combined with two propagation codes to predict corresponding sound pressure level profiles over the length of the Grazing Flow Impedance Tube. The comparison of measured and predicted sound pressure level profiles is sufficiently favorable to support use of these tools for investigation of a number of proposed variable-depth liner configurations. Predicted sound pressure level profiles for these proposed configurations reveal a number of interesting features. Liner orientation clearly affects the sound pressure level profile over the length of the liner, but the effect on the total attenuation is less pronounced. The axial extent of attenuation at an individual frequency continues well beyond the location where the liner depth is optimally tuned to the quarter-wavelength of that frequency. The sound pressure level profile is significantly affected by the way in which variable-depth segments are distributed over the length of the liner. Given the broadband noise reduction capability for these liner configurations, further development of impedance prediction models and propagation codes specifically tuned for this application is warranted.

Jones, M. G.↗

Tropospheric Ozone Source Attribution in Southern California during Summer 2014 Based on Lidar Measurements and Model Simulations

In the past decades, significant efforts have been made to increase tropospheric ozone long-term monitoring. A large number of ground-based, airborne and space-borne instruments are currently providing valuable data to contribute to better understand tropospheric ozone budget and variability. Nonetheless, most of these instruments provide in-situ surface and column-integrated data, whereas vertically resolved measurements are still scarce. Besides ozonesondes and aircraft, lidar measurements have proven to be valuable tropospheric ozone profilers. Using the measurements from the tropospheric ozone differential absorption lidar (DIAL) located at the JPL Table Mountain Facility, California, and the GEOS-Chem and GEOS-5 model outputs, the impact of the North American monsoon on tropospheric ozone during summer 2014 is investigated. The influence of the Monsoon lightning-induced NOx will be evaluated against other sources (e.g. local anthropogenic emissions and the stratosphere) using also complementary data such as backward-trajectories analysis, coincident water vapor lidar measurements, and surface ozone in-situ measurements.

Lidar↗

The noise dose range of the X-59 estimated from propagation simulations

NASA’s X-59 aircraft will soon be flown in a series of low-boom community noise surveys across the USA. Community test experimental designs will include noise dose schedules, which require an estimate of the noise dose range that X-59 can produce. To determine the dose range, propagation simulations using NASA’s PCBoom code were completed using CFD-generated X-59 C612A near-field pressure data for an on-design condition (Mach 1.4 at 53,200 feet) and two off-design conditions (Mach 1.4 at 46,000 ft and Mach 1.3 at 43,000 ft). Near-field data at four cardinal aircraft headings were propagated through one year of realistic atmospheric profiles from the Climate Forecast System Version 2 database at several USA locations. Statistics of the mean and range of the Perceived Level (PL) of the booms in the inner 40 km of each carpet as well as the carpet width were computed. Results indicate the typical inner carpet mean PL is approximately 70-87 dB depending on the aircraft condition. The typical PL range across the inner carpet is 6-8 dB (on-design) and 5-13 dB (off-designs). The carpet widths ranged from 32-55 km. Understanding these quantities for various flight and atmospheric conditions is important for planning X-59 community noise surveys.

X-59↗

Status of the Microwave Barometric Radar and Sounder (MBARS)

Atmospheric surface pressure and pressure profiles are essential variables in weather modeling and forecasting. Pressure gradients generate atmospheric motion and are essential to the air-sea heat exchange feedbacks within the planetary boundary layer (PBL) that lead to convective storms and heavy precipitation. Despite the importance of pressure and pressure gradients on meso-, synoptic-, and global-scale weather patterns, current technology relies almost entirely on buoy measurements over the majority of the ocean. These measurements are too sparse to capture pressure gradients of even many synoptic scale events, and leave models starved of information. NASA/Goddard Space Flight Center (GSFC), NASA/Langley Research Center (LaRC), and Tomorrow.io have begun development of the Microwave Barometric Radar and Sounder (MBARS), an airborne sensor to retrieve surface air pressure and vertical pressure profiles, especially over oceans. MBARS is a new combined active/passive microwave instrument in the O2 absorption V-band (64-70 GHz) funded by the NASA Earth Science Technology Office (ESTO) Instrument Incubator Program (IIP). This instrument consists of an innovative scanning multi-channel differential absorption radar (DAR) to provide an estimation of total atmospheric column oxygen content and thus the surface dry air pressure. MBARS also will provide hyperspectral radiometric temperature profiling to enables vertical pressure profiles using the hypsometric relationship between pressure and temperature. A co-located microwave radiometer will provide the integrated water vapor mass contribution to atmospheric pressure. This presentation will summarize the project, retrieval concept, and engineering status of the MBARS project.

Radar, Radiometer↗

Wind Profiling With the Airborne Doppler Aerosol Wind Lidar During the 2022 Convective Processes Experiment

The 2017 Decadal Survey for Earth Science and Applications from Space (ESAS 2017) identifies a critical need for improving our understanding of Planetary Boundary Layer (PBL) processes and air-surface fluxes as well as why clouds, convection, and heavy precipitation occur when and where they do. Lidars are uniquely capable of collecting high precision and high spatio-temporal observations that have been used for atmospheric process studies from the ground, aircraft, and space. The wind lidar team at the NASA Langley Research Center (LaRC) started the development of Doppler wind lidar more than a decade ago to demonstrate technologies required for an Earth-orbiting system to globally measure wind profiles. Since then, an airborne Doppler Aerosol WiNd (DAWN) lidar system has been developed and participated in a series of field campaigns. The Doppler Aerosol WiNd (DAWN) lidar uses atmospheric aerosol motion to derive vertical profiles of horizontal wind speed and direction beneath the aircraft. In September 2022, DAWN, along with a suite of other instruments, was flown on a NASA DC-8 as part of The Convective Processes EXperiment – Cabo Verde (CPEX-CV) field campaign. A main objective of CPEX was to obtain a comprehensive set of temperature, humidity and, particularly, wind observations over tropical waters in undisturbed conditions, Saharan dust outbreaks, and in the vicinity of scattered through organized deep convection in all phases of the convective life cycle. DAWN collected data for approximately 90 hours across 13 CPEX-CV science flights. Airborne Vertical Atmospheric Profiling System (AVAPS) dropsondes were dropped throughout the flight for profiling the atmosphere and validating the DAWN instrument. DAWN had co-located data with 347 AVAPS NRD41 dropsondes, providing 32,117 vertical levels for a comprehensive validation of DAWN wind retrievals. DAWN showed very good agreement with dropsondes of ~0.2 m/s bias and ~1.8 m/s RMS. Given this agreement, DAWN is considered to be a worthy reference dataset, and its retrievals have been compared to winds derived from GOES Atmospheric Motion Vectors (AMVs), Advanced Scatterometer winds (ASCAT), and model data from GFS, GEOS, and MERRA-2 to better understand the quality of our current models and satellite wind observations. The proposed presentation will provide a brief description of the DAWN instrument, discuss the synergistic observations collected across a wide range of atmospheric conditions sampled during the CPEX-CV flights, and a summary of comparisons between DAWN, GOES AMV, ASCAT, and model analyses/predictions, with an emphasis on the PBL.

DAWN↗

Haloes gone MAD: The Halo-Finder Comparison Project

We present a detailed comparison of fundamental dark matter halo properties retrieved by a substantial number of different halo finders. These codes span a wide range of techniques including friends-of-friends, spherical-overdensity and phase-space-based algorithms. We further introduce a robust (and publicly available) suite of test scenarios that allow halo finder developers to compare the performance of their codes against those presented here. This set includes mock haloes containing various levels and distributions of substructure at a range of resolutions as well as a cosmological simulation of the large-scale structure of the universe. All the halo-finding codes tested could successfully recover the spatial location of our mock haloes. They further returned lists of particles (potentially) belonging to the object that led to coinciding values for the maximum of the circular velocity profile and the radius where it is reached. All the finders based in configuration space struggled to recover substructure that was located close to the centre of the host halo, and the radial dependence of the mass recovered varies from finder to finder. Those finders based in phase space could resolve central substructure although they found difficulties in accurately recovering its properties. Through a resolution study we found that most of the finders could not reliably recover substructure containing fewer than 30-40 particles. However, also here the phase-space finders excelled by resolving substructure down to 10-20 particles. By comparing the halo finders using a high-resolution cosmological volume, we found that they agree remarkably well on fundamental properties of astrophysical significance (e.g. mass, position, velocity and peak of the rotation curve). We further suggest to utilize the peak of the rotation curve, v{sub max}, as a proxy for mass, given the arbitrariness in defining a proper halo edge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NDLGS project update

Recent results for laser and ESD processing for the NDLGS project will be reviewed. Conclusions are: (1) Short mix passes have profound effect on window T; (2) Multiple drill and re-weld at single location has been shown to be feasible and successful; (3) Kapton beam profiling method has been successfully developed. Comparison of 100 mm and 120 mm lenses gives reasonable and consistent results; (4) Manifold pumpdown data has been presented; (5) ESO results can be accurately predicted once a repeatable efficiency has been established; and (6) The electrode-workpiece geometry may play an important on ESO efficiency. Experiments are planned to investigate these effects.

36 MATERIALS SCIENCE↗

Regional Seismic Travel Time Node Get and Set

RSTT_NOGS allows users to easily get and set seismic velocity vs. depth profiles at specified model tessellation nodes. RSTT_NOGS uses the Sandia Seismic Location Baseline Model code that was released under BSD license in 2009.

Myers, S. C.↗