Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JET MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Application of Sweeping Jet Actuators on the NASA Hump Model and Comparison with CFDVAL2004 Experiments

Flow separation control over a wall-mounted hump model was studied experimentally to assess the performance of sweeping jet actuators. Results were compared to that of the 2004 CFD validation experiment (CFDVAL2004), which examined flow separation control with steady suction and unsteady zero-net-mass-flow actuators. Comparisons were carried out at low and high amplitude excitations. In addition to the active flow control methods, a passive flow control method (i.e., vortex generator) was used to complement the dataset. Steady/unsteady surface pressure measurements and surface oilflow visualization were used in the performance assessment of the actuators. The results indicated that the sweeping jet actuators are more effective than the steady suction and unsteady zero-net-mass-flow actuators. For the same momentum coefficient, the sweeping jet actuators produced more flow acceleration upstream of separation, more pressure recovery downstream, and consistently a smaller separation bubble.

Koklu, Mehti↗

Simulation of Thermal Stratification in BWR Suppression Pools with One Dimensional Modeling Method

The suppression pool in a boiling water reactor (BWR) plant not only is the major heat sink within the containment system, but also provides the major emergency cooling water for the reactor core. In several accident scenarios, such as a loss-of-coolant accident and extended station blackout, thermal stratification tends to form in the pool after the initial rapid venting stage. Accurately predicting the pool stratification phenomenon is important because it affects the peak containment pressure; the pool temperature distribution also affects the NPSHa (available net positive suction head) and therefore the performance of the Emergency Core Cooling System and Reactor Core Isolation Cooling System pumps that draw cooling water back to the core. Current safety analysis codes use zero dimensional (0-D) lumped parameter models to calculate the energy and mass balance in the pool; therefore, they have large uncertainties in the prediction of scenarios in which stratification and mixing are important. While three-dimensional (3-D) computational fluid dynamics (CFD) methods can be used to analyze realistic 3-D configurations, these methods normally require very fine grid resolution to resolve thin substructures such as jets and wall boundaries, resulting in a long simulation time. For mixing in stably stratified large enclosures, the BMIX++ code (Berkeley mechanistic MIXing code in C++) has been developed to implement a highly efficient analysis method for stratification where the ambient fluid volume is represented by one-dimensional (1-D) transient partial differential equations and substructures (such as free or wall jets) are modeled with 1-D integral models. This allows very large reductions in computational effort compared to multi-dimensional CFD modeling. One heat-up experiment performed at the Finland POOLEX facility, which was designed to study phenomena relevant to Nordic design BWR suppression pool including thermal stratification and mixing, is used for validation. Comparisons between the BMIX++, GOTHIC, and CFD calculations against the POOLEX experimental data are discussed in detail.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A wave driven model of the Jovian equatorial jet

We explore the consequences of assuming that the equatorial jet, which is the most prominent feature of the atmospheric motions on Jupiter, is driven by vertically propagating Kelvin and mixed Rossby-gravity waves that are absorbed during their passage through the stratosphere to produce a mean zonal flow. Since even the basic atmospheric parameters on Jupiter are still largely a matter of conjecture, we are not able to produce a unique model but one that can span a whole range of possible conditions and which can be refined (or rejected) as more information becomes available.

Maxworthy, T.↗

Materials Database Development for Ballistic Impact Modeling

A set of experimental data is being generated under the Fundamental Aeronautics Program Supersonics project to help create and validate accurate computational impact models of jet engine impact events. The data generated will include material property data generated at a range of different strain rates, from 1x10(exp -4)/sec to 5x10(exp 4)/sec, over a range of temperatures. In addition, carefully instrumented ballistic impact tests will be conducted on flat plates and curved structures to provide material and structural response information to help validate the computational models. The material property data and the ballistic impact data will be generated using materials from the same lot, as far as possible. It was found in preliminary testing that the surface finish of test specimens has an effect on measured high strain rate tension response of AL2024. Both the maximum stress and maximum elongation are greater on specimens with a smoother finish. This report gives an overview of the testing that is being conducted and presents results of preliminary testing of the surface finish study.

Pereira, J. Michael↗

An interface capturing scheme for modeling atomization in compressible flows

The study of atomization in supersonic flow is critical to ensuring reliable ignition of scramjet combustors under startup conditions. Numerical methods incorporating surface tension effects have largely focused on the incompressible regime as most atomization applications occur at low Mach numbers. Simulating surface tension effects in compressible flow requires robust numerical methods that can handle discontinuities caused by both shocks and material interfaces with high density ratios. In this work, a shock and interface capturing scheme is developed that uses the Harten–Lax–van Leer–Contact (HLLC) Riemann solver while a Tangent of Hyperbola for INterface Capturing (THINC) interface reconstruction scheme retains the fluid immiscibility condition in the volume fraction and phasic densities in the context of the five equation model. The approach includes the effects of compressibility, surface tension, and molecular viscosity. One and two-dimensional benchmark problems demonstrate the desirable interface sharpening and conservation properties of the approach. Simulations of secondary atomization of a cylindrical water column after its interaction with a shockwave show good qualitative agreement with experimentally observed behavior. Three-dimensional examples of primary atomization of a liquid jet in a Mach 2 crossflow demonstrate the robustness of the method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interplaying mechanisms behind inclusive jet R and extraction of jet energy loss distributions

The observed inclusive jet suppression in heavy-ion collisions at LHC has a very weak p T dependence over a large range of p T =50–1000 GeV and is almost independent of the colliding energy, though the initial energy density of the bulk medium has increased from √s=2.76 to 5.02 TeV by about 20%. This interesting phenomenon is investigated in the linear Boltzmann transport (LBT) model for jet propagation in an event-by-event 3+1D hydro background. We show that the p T dependence of jet R AA is determined by the initial spectrum in p+p collisions and p T dependence of jet energy loss. Furthermore, jet energy loss distributions for inclusive jet and γ-jet at both LHC energies are extracted directly from experimental data through the state-of-art Bayesian analysis. Additionally, the averaged jet energy loss has a weak p T dependence and the scaled jet energy loss distributions have a large width, both of which are consistent with the LBT simulations and indicate that jet quenching is caused by only a few out-of-cone jet medium scatterings.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Jet-Front Speed and the Origin of Jets in Polar Coronal Holes

The area-average strength of the open magnetic field in the polar coronal holes can be estimated from the radial component of the magnetic field measured by Ulysses in the solar wind, the fraction of the solar sphere covered by the polar coronal holes, and the fraction of the heliosphere filled by the fast solar wind from the polar coronal holes. For the present minimum phase of the solar cycle, the estimated strength is approximately 10 G. Using this strength for the ambient open field in the standard reconnection model for jets in coronal holes, we obtain for any given jet-front speed a lower bound on the initial temperature of the expanding jet-front plasma, and an upper bound on the ambient plasma density at the reconnection site. These two bounds indicate the following. For jet-front speeds of approximately 1000 km/s, (1) the reconnection site has to be in the low corona or upper transition region (n(e) is less than 10(exp 9) cm(exp -3)), not in the lower transition region or chromosphere, (2) the jet-front plasma is initially heated to T greater than approximately 10(exp 7) K, and (3) hence a compact X-ray flare is produced at the base of the jet. For jet-front speeds less than approximately 100 km/s, (1) the jet can be produced by reconnection in the lower transition region (approximately 10(exp 9) less than n(e) less than approximately 10(exp 10) cm(exp-3)) or upper chromosphere (approximately 10(exp 10) less than n(e) less than approximately 10(exp 12) cm-3), (2) the initial temperature of the jet-front plasma can be less than 10(exp 6) K, and (3) hence some EUV and H(alpha) jet-type macrospicules may be produced with no detectable X-ray emission.

Moore, Ron↗

Exclusive Measurements for SUSY Events with the ATLAS Detector at the LHC

We present recent work performed in ATLAS on the SUSY mass measurement techniques by selecting exclusive decay chains as well as on the determination of SUSY model parameters with an integrated luminosity of 1 fb{sup -1} at 14 TeV center of mass energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A directional microphone array for acoustic studies of wind tunnel models

An end-fire microphone array that utilizes a digital time delay system has been designed and evaluated for measuring noise in wind tunnels. The directional response of both a four- and eight-element linear array of microphones has enabled substantial rejection of background noise and reverberations in the NASA Ames 40- by 80-foot wind tunnel. In addition, it is estimated that four- and eight-element arrays reject 6 and 9 dB, respectively, of microphone wind noise, as compared with a conventional omnidirectional microphone with nose cone. Array response to two types of jet engine models in the wind tunnel is presented. Comparisons of array response to loudspeakers in the wind tunnel and in free field are made.

Soderman, P. T.↗

Theory of two-point correlations of jet noise

A large body of careful experimental measurements of two-point correlations of far field jet noise was carried out. The model of jet-noise generation is an approximate version of an earlier work of Ribner, based on the foundations of Lighthill. The model incorporates isotropic turbulence superimposed on a specified mean shear flow, with assumed space-time velocity correlations, but with source convection neglected. The particular vehicle is the Proudman format, and the previous work (mean-square pressure) is extended to display the two-point space-time correlations of pressure. The shape of polar plots of correlation is found to derive from two main factors: (1) the noncompactness of the source region, which allows differences in travel times to the two microphones - the dominant effect; (2) the directivities of the constituent quadrupoles - a weak effect. The noncompactness effect causes the directional lobes in a polar plot to have pointed tips (cusps) and to be especially narrow in the plane of the jet axis. In these respects, and in the quantitative shapes of the normalized correlation curves, results of the theory show generally good agreement with Maestrello's experimental measurements.

Ribner, H. S.↗

Search for Anomalous Top Quark Production at DOe

Different analyses for anomalous top quark production were performed in pp-bar collisions at sq root(s) = 1.96 TeV using data collected by the DOe detector at the Fermilab Tevatron. We report on the first measurement of forward-backward asymmetry and search for tt-bar resonance from tt-bar pair productions, and searches for W' and charged Higgs bosons from single top events, which are sensitive to new physics beyond the standard model. We found no evidence for the searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hard-photon-triggered jets in 𝑝−𝑝 and 𝐴−𝐴 collisions

An investigation of high-transverse-momentum (high-𝑝 𝑇 ) photon-triggered jets in proton-proton (𝑝−𝑝) and ion-ion (𝐴−𝐴) collisions at $\sqrt{s_{NN}}$=0.2 and 5.02TeV is carried out, using the multistage description of in-medium jet evolution. Monte Carlo simulations of hard scattering and energy loss in heavy-ion collisions are performed using parameters tuned in a previous study of the nuclear modification factor (𝑅 𝐴⁢𝐴 ) for inclusive jets and high-𝑝𝑇 hadrons. We obtain a good reproduction of the experimental data for photon-triggered jet 𝑅 𝐴⁢𝐴 , as measured by the ATLAS detector, the distribution of the ratio of jet to photon 𝑝 𝑇 (𝑋 𝐽⁢𝛾 ), measured by both CMS and ATLAS, and the photon-jet azimuthal correlation as measured by CMS. We obtain a moderate description of the photon-triggered jet 𝐼 𝐴⁢𝐴 , as measured by STAR. A noticeable improvement in the comparison is observed when one goes beyond prompt photons and includes bremsstrahlung and decay photons, revealing their significance in certain kinematic regions, particularly at 𝑋 𝐽⁢𝛾 >1. Moreover, azimuthal angle correlations demonstrate a notable impact of bremsstrahlung photons on the distribution, emphasizing their role in accurately describing experimental results. This work highlights the success of the multistage model of jet modification to straightforwardly predict (this set of) photon-triggered jet observables. This comparison, along with the role played by bremsstrahlung photons, has important consequences on the inclusion of such observables in a future Bayesian analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Studies of African wave disturbances with the GISS GCM

Simulations made with the general circulation model of the NASA/Goddard Institute for Space Studies (GISS GCM) run at 4 deg latitude by 5 deg longitude horizontal resolution are analyzed to determine the model's representation of African wave disturbances. Waves detected in the model's lower troposphere over northern Africa during the summer monsoon season exhibit realistic wavelengths of about 2200 km. However, power spectra of the meridional wind show that the waves propagate westward too slowly, with periods of 5-10 days, about twice the observed values. This sluggishness is most pronounced during August, consistent with simulated 600-mb zonal winds that are only about half the observed speeds of the midtropospheric jet. The modeled wave amplitudes are strongest over West Africa during the first half of the summer but decrease dramatically by September, contrary to observational evidence. Maximum amplitudes occur at realistic latitudes, 12 deg - 20 deg N, but not as observed near the Atlantic coast. Spectral analyses suggest some wave modulation of precipitation in the 5-8 day band, and compositing shows that precipitation is slightly enhanced east of the wave trough, coincident with southerly winds. Extrema of low-level convergence west of the wave troughs, coinciding with northerly winds, were not preferred areas for simulated precipitation, probably because of the drying effect of this advection, as waves were generally north of the humid zone. The documentation of African wave disturbances in the GISS GCM is a first step toward considering wave influences in future GCM studies of Sahel drought.

Druyan, Leonard M.↗

Basic data of ions in He-air mixtures for fluid modeling of low temperature plasma jets

The basic ion data such as interaction potential parameters, elastic and inelastic collision cross sections, transport coefficients (reduced mobility and diffusion coefficients) and reaction coefficients have been analysed and determined for the case of He{sup +}, N{sub 2}{sup +}, and O{sub 2}{sup +} in He-dry air mixtures. The ion transport and reaction coefficients have been determined from an optimized Monte Carlo simulation using calculated elastic and experimentally fitted inelastic collision cross sections. The elastic momentum transfer cross sections have been calculated from a semi-classical JWKB (Jeffreys Wentzel Kramers Brillouin) approximation based on a (6-4) rigid core interaction potential model. The inelastic cross sections have been fitted using the measured reaction coefficients, such as, for instance, the non resonant charge transfer coefficients. The cross section sets involving elastic and inelastic processes were then validated using either the measured reduced mobility whenever available in the literature or the zero-field mobility calculated from Satoh's relation, and potential parameters available in the literature. From the sets of elastic and inelastic collision cross sections thus obtained for the first time for He{sup +}/N{sub 2}, He{sup +}/O{sub 2}, N{sub 2}{sup +}/He, and O{sub 2}{sup +}/He systems, the ion transport and reaction coefficients were calculated in the pure gases over a wide range of the density reduced electric field E/N. Then, from the present cross section and other literature sets, the ion mobility and the longitudinal and transverse diffusion coefficients were calculated for different concentrations of air in He in the case of He{sup +}, N{sub 2}{sup +}, O{sub 2}{sup +}, and also O{sup -} ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics of Flow Field for Supersonic Oxygen Multijets with Various Laval Nozzle Structures

The Laval nozzle is used widely in steelmaking processes to increase the velocity of an oxygen jet up to approximately 2 Mach numbers. The present research is aimed at determining the effect of the Laval nozzle structure on a supersonic oxygen jet flow field. Both one-dimensional isoentropic flow theory and a characteristic-line method were used to design five-hole oxygen lances of two types and, applicable to oxygen multijets, to analyze their flow field characteristics by a series of numerical simulations and experimental studies. When compared to the conventional oxygen lance designed according to the one-dimensional isoentropic flow theory, the new oxygen lance designed with employment of the characteristic-line method is more effective in both suppressing the shock wave generation and improving the initial axial velocity of oxygen jets under the same test conditions. As a result, a larger impaction cavity was generated by the new oxygen lance and the mass transfer within oxygen, liquid slag, and molten steel was enhanced.

36 MATERIALS SCIENCE↗

Acoustic characteristics of a semispan wing equipped with an externally blown jet flap including results at forward speed

A wind-tunnel investigation was made of the noise characteristics of a 14.5-ft semispan, externally blown jet flap model. The model was equipped with a single 30-in. diameter, ducted fan with a 1.03 pressure ratio. The effects of flap size, fan vertical location, and forward speed on the noise characteristics were studied. With the ducted fan mounted 0.79 or 1.24 diameters below the wing and a flap chord greater than 50 percent, the peak perceived noise level increased 2 to 3 Pndb when the flap was deflected to 90 deg. The jet scrubbing noise increase 3 to 4 db when the flap was deflected 90 deg. Installation of the fan on the wing was responsible for 1 to 2 db of this change. Forward speed did not have a significant effect on the perceived noise level, although it did cause a reduction in the sound pressure levels of the first and second fan harmonics.

Falarski, M. D.↗

Investigations of scaling laws for jet impingement

The statistical properties of tangential flows over surfaces were investigated by two techniques. In one, a laser-Doppler velocimeter was used in a smoke-laden jet to measure one-point statistical properties, including mean velocities, turbulent intensities, intermittencies, autocorrelations, and power spectral densities. In the other technique, free stream and surface pressure probes connected to 1/8 inch microphones were used to obtain single point rms and 1/3 octave pressures, as well as two point cross correlations, the latter being converted to auto spectra, amplitude ratios, phase lags, and coherences. The results of these studies support the vortex model of jets, give some insights into the effects of surface impingement, and confirm that jet diameter and velocity are the scaling parameters for circular jets, while Reynolds number is relatively unimportant.

Morton, J. B.↗