Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Infrared optics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Changes in chemical and optical properties of thin film metal mirrors on LDEF

Thin films of the metals Cu, Ni, Pt, Au, Sn, Mo, and W deposited on fused silica flats were exposed at ambient temperature on the leading and trailing faces of the LDEF. Reflectances of these films were measured from 250 to 2500 nm and compared with controls. The exposed films were subjected to the LDEF external environment including atomic oxygen, molecular contamination, and solar ultraviolet. Major changes in optical and infrared reflectance were seen for Cu, Mo, Ni, and W films on the leading face of LDEF and are attributed to partial conversion of metal to metal oxide. Smaller changes in optical properties are seen on all films and are probably caused by thin contaminant films deposited on top of the metal. The optical measurements are correlated with film thickness measurements, x-ray photoelectron spectroscopy, optical calculations, and, in the case of Cu, with x-ray diffraction measurements. In a few cases, comparisons with results from a similar UAH experiment on STS-8 have been drawn.

Peters, Palmer N.↗

Coupled surface plasmon–phonon polariton nanocavity arrays for enhanced mid-infrared absorption

Abstract Resonant optical cavities are essential components in mid-infrared applications. However, typical film-type cavities require multilayer stacks with a micron-thick spacer due to mid-infrared wavelengths, and their performance is limited by narrow frequency tunability and angular sensitivity. We propose and experimentally demonstrate the subwavelength-scale (≈ λ 0 /150) resonant nanocavity arrays that enhance the absorption spectrum of the device in the mid-infrared (10–12 microns) via excitation of coupled surface plasmon–phonon polaritons. The proposed metal–insulator–polar dielectric (gold–silicon–silicon carbide) structure supports a guided mode of the coupled surface polaritons in the lateral direction while vertically confining the mid-infrared wave within the 80 nm thick dielectric spacer. In particular, the subwavelength-scale (≈ λ 0 /10) gratings are imposed to form Fabry–Pérot cavity arrays displaying angle-insensitive and frequency-tunable absorption of up to 80% of the optical power in the mid-infrared. Our work should benefit diverse mid-infrared applications and novel designs of polariton-based photonic devices.

42 ENGINEERING↗

CHANDRA DETECTION OF SN 2010da FOUR MONTHS AFTER OUTBURST: EVIDENCE FOR A HIGH-MASS X-RAY BINARY IN NGC 300

We present the results of a 63 ks Chandra observation of the 'supernova impostor' SN 2010da four months after it was first observed on 2010 May 24. We detect an X-ray source at {approx}7{sigma} confidence coincident with the optical location of the outburst. Our imaging analysis has revealed a hard central point source, surrounded by soft diffuse emission extending {approx}8'' north of the central source. The diffuse emission has a hardness ratio ({approx}-0.4), 0.35-2 keV luminosity ({approx}6 x 10{sup 35} erg s{sup -1}), and size ({approx}70 pc) consistent with that of a supernova remnant, although the low number of counts prohibits detailed spectral modeling. The 0.5-6 keV spectrum of the central point source is well described by both a power law with {Gamma} {approx}0 and a blackbody with kT {approx} 1.8 keV, with no evidence for intrinsic absorption beyond the Galactic column. We estimate the 0.3-10 keV luminosity to be {approx}2 x 10{sup 37} erg s{sup -1}, a factor of {approx}25 decrease since the initial outburst. The high X-ray luminosity and slow fading rate is not consistent with this object being a single massive star undergoing an outburst. When combined with the optical and infrared properties of the outburst and progenitor systems, our X-ray observations suggest the SN 2010da system may be a Be X-ray binary system which experienced an extremely bright optical outburst near simultaneously with a bright, Type II X-ray outburst.

79 ASTRONOMY AND ASTROPHYSICS↗

The IMACS Cluster Building Survey. I. Description of the Survey and Analysis Methods

The IMACS Cluster Building Survey uses the wide field spectroscopic capabilities of the IMACS spectrograph on the 6.5 m Baade Telescope to survey the large-scale environment surrounding rich intermediate-redshift clusters of galaxies. The goal is to understand the processes which may be transforming star-forming field galaxies into quiescent cluster members as groups and individual galaxies fall into the cluster from the surrounding supercluster. This first paper describes the survey: the data taking and reduction methods. We provide new calibrations of star formation rates (SFRs) derived from optical and infrared spectroscopy and photometry. We demonstrate that there is a tight relation between the observed SFR per unit B luminosity, and the ratio of the extinctions of the stellar continuum and the optical emission lines.With this, we can obtain accurate extinction-corrected colors of galaxies. Using these colors as well as other spectral measures, we determine new criteria for the existence of ongoing and recent starbursts in galaxies.

IMACS↗

Insights on proximity effect and multiphoton induced luminescence from gold nanospheres in far field optical microscopy

Gold nanoparticles can be visualized in far-field multiphoton laser-scanning microscopy (MPM) based on the phenomena of multiphoton induced luminescence (MIL). This is of interest for biomedical applications, e.g., for cancer diagnostics, as MPM allows for working in the near-infrared (NIR) optical window of tissue. It is well known that the aggregation of particles causes a redshift of the plasmon resonance, but its implications for MIL applying far-field MPM should be further exploited. Here, we explore MIL from 10 nm gold nanospheres that are chemically deposited on glass substrates in controlled coverage gradients using MPM operating in NIR range. The substrates enable studies of MIL as a function of inter-particle distance and clustering. It was shown that MIL was only detected from areas on the substrates where the particle spacing was less than one particle diameter, or where the particles have aggregated. The results are interpreted in the context that the underlying physical phenomenon of MIL is a sequential two-photon absorption process, where the first event is driven by the plasmon resonance. It is evident that gold nanospheres in this size range have to be closely spaced or clustered to exhibit detectable MIL using far-field MPM operating in the NIR region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin–lattice and electron–phonon coupling in 3d/5d hybrid Sr3NiIrO6

Abstract While 3 d -containing materials display strong electron correlations, narrow band widths, and robust magnetism, 5 d systems are recognized for strong spin–orbit coupling, increased hybridization, and more diffuse orbitals. Combining these properties leads to novel behavior. Sr 3 NiIrO 6 , for example, displays complex magnetism and ultra-high coercive fields—up to an incredible 55 T. Here, we combine infrared and optical spectroscopies with high-field magnetization and first-principles calculations to explore the fundamental excitations of the lattice and related coupling processes including spin–lattice and electron–phonon mechanisms. Magneto-infrared spectroscopy reveals spin–lattice coupling of three phonons that modulate the Ir environment to reduce the energy required to modify the spin arrangement. While these modes primarily affect exchange within the chains, analysis also uncovers important inter-chain motion. This provides a mechanism by which inter-chain interactions can occur in the developing model for ultra-high coercivity. At the same time, analysis of the on-site Ir 4+ excitations reveals vibronic coupling and extremely large crystal field parameters that lead to a t 2 g -derived low-spin state for Ir. These findings highlight the spin–charge–lattice entanglement in Sr 3 NiIrO 6 and suggest that similar interactions may take place in other 3 d /5 d hybrids.

36 MATERIALS SCIENCE↗

Abundances and Transients from Neutron Star–White Dwarf Mergers

Abstract We systematically investigate the mergers of neutron star–white dwarf binaries from beginning to end, with a focus on the properties of the inflows and outflows in accretion disks and their electromagnetic emissions. Using population synthesis models, we determine a subset of these binaries in which the white dwarf companion undergoes unstable mass transfer and complete tidal disruption, forming a large accretion disk around the neutron star. The material evolves according to a one-dimensional advection-dominated accretion-disk model with nuclear burning, neutrino emissions, and disk-surface wind ejection. The extreme dynamics of the entire process have proven difficult to analyze, and thus currently, the properties are poorly understood. The outflows from the mergers are iron- and nickel-rich, giving rise to optical and infrared emissions powered by the decay of the radioactive iron-type isotopes, calculated via the SuperNu light-curve code. We find these systems capable of powering bright, yet short-lived, optical transients with the potential to power gamma-ray bursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical Design for the Composite InfraRed Spectrometer Lite (CIRS-Lite)

Following up on Cassini/CIRS, we are building the next-generation Composite InfraRed Spectrometer for deep-space planetary exploration. CIRS-Lite combines Mid & Far-IR channels into a single instrument with 4x the spectral sensitivity of CIRS. Here we discuss the instrument optical design, the design process, and the system performance.

Pasquale, Bert A.↗

Small Business Innovations (Fiber Optics)

Foster-Miller, Inc. Waltham, MA developed the In-Situ Fiber Optic Polymer Reaction Monitor which could lead to higher yields and lower costs in complex composite manufacturing. The monitor, developed under a Small Business Innovation Research (SBIR) contract with Langley Research Center, uses an infrared, fiber optic sensor to track the molecular vibrational characteristics of a composite part while it is being cured. It is the first analytical system capable of directly measuring the chemistry of advanced composite materials.

Source record↗

Visible-infrared properties of controlled laboratory soils

Almost all surfaces available for remote observation consist of particulate materials or soils. The distribution of mean particle sizes depend on the original material and physical and chemical processes that have acted on the surface over time. It is well known that the optical and infrared spectral properties of materials depends on the particle size. There has been little detailed study, however, of natural soils, namely particulate materials with a range of particle sizes. Current models for intimate mixing typically use an average particle size in calculations and are most successful when the particle size is constrained by known sieve fractions. Preliminary results of a study in which soils were prepared with a known composition and range of particle sizes are reported. This discussion presents the overall visible to infrared properties of these synthetic soils and evaluates the mid-infrared properties.

Pieters, C. M.↗

OGLE-2017-BLG-1434Lb: Confirmation of a Cold Super-Earth Using Keck Adaptive Optics

The microlensing event OGLE-2017-BLG-1434 features a cold super-Earth planet that is 1 of 11 microlensing planets with a planet–host-star mass ratio of q < 1 × 10{sup -4}. We provide an additional mass–distance constraint on the lens host using near-infrared adaptive optics photometry from Keck/NIRC2. We are able to determine a flux excess of K {sub L} = 16.96 ± 0.11, which most likely comes entirely from the lens star. Combining this with constraints from the large Einstein ring radius, θ {sub E} = 1.40 ± 0.09 mas, and OGLE parallax we confirm this event as a super-Earth with a mass of m {sub p} = 4.43 ± 0.25M {sub ⊕}. This system lies at a distance of D {sub L} = 0.86 ± 0.05 kpc from Earth and the lens star has a mass of M {sub L} = 0.234 ± 0.012M {sub ⊙}. We confirm that with a star–planet mass ratio of q = 0.57 × 10{sup -4}, OGLE-2017-BLG-1434 lies near the inflexion point of the planet–host mass-ratio power law.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fast-rising blue optical transients and AT2018cow following electron-capture collapse of merged white dwarfs

We suggest that fast-rising blue optical transients (FBOTs) and the brightest event of the class, AT2018cow, result from an electron-capture collapse to a neutron star following the merger of a massive ONeMg white dwarf (WD) with another WD. Two distinct evolutionary channels lead to the disruption of the less-massive WD during the merger and the formation of a shell-burning non-degenerate star incorporating the ONeMg core. During the shell-burning stage, a large fraction of the envelope is lost to the wind, while mass and angular momentum are added to the core. As a result, the electron-capture collapse occurs with a small envelope mass, after ~10 2 –10 4 yr. During the formation of a neutron star, as little as |${\sim } 10^{-2} \, \mathrm{M}_\odot$| of the material is ejected at the bounce-off with mildly relativistic velocities and total energy of about a few 10 50 erg. This ejecta becomes optically thin on a time-scale of days – this is the FBOT. During the collapse, the neutron star is spun up and the magnetic field is amplified. The ensuing fast magnetically dominated relativistic wind from the newly formed neutron star shocks against the ejecta, and later against the wind. The radiation-dominated forward shock produces the long-lasting optical afterglow, while the termination shock of the relativistic wind produces the high-energy emission in a manner similar to pulsar wind nebulae. If the secondary WD was of the DA type, the wind will likely have |${\sim } 10^{-4} \, \mathrm{M}_\odot$| of hydrogen; this explains the appearance of hydrogen late in the afterglow spectrum. The model explains many of the puzzling properties of FBOTs/AT2018cow: host galaxies, a fast and light anisotropic ejecta producing a bright optical peak, afterglow high-energy emission of similar luminosity to the optical, and late infrared features.

Astronomy & Astrophysics↗

Hollow Core Fiber Optics for Mid-Wave and Long-Wave Infrared Spectroscopy

The development and testing of hollow core glass waveguides (i.e., fiber optics) for use in Long-Wave Infrared (LWIR) spectroscopy systems is described. LWIR fiber optics are a key enabling technology needed to improve the utility and effectiveness of trace chemical detection systems based in the 8 to 12 micron region. This paper focuses on recent developments in hollow waveguide technology geared specifically for LWIR spectroscopy, including a reduction in both the length dependent loss and the bending loss while maintaining relatively high beam quality. Results will be presented from tests conducted with a Quantum Cascade Laser.

99 GENERAL AND MISCELLANEOUS↗

Time and frequency resolved transient-absorption and stimulated-Raman signals of stochastic light

Covariance spectroscopy signals based on the transmission of broadband stochastic probe light undergoing a nonlinear optical process with matter are studied. The resulting signal depends on intensity correlation functions of the probe pulse. Application is made to transient absorption and stimulated Raman signals, where an ultraviolet pump and a delayed stochastically modulated infrared or optical Raman probe are used for monitoring vibrational excitations. We show that the stochastic properties of light can be exploited to circumvent the limitations on the joint temporal and spectral resolution of the signal. We study a model system with a time-dependent frequency and show that the dynamical information can be fully extracted from the covariance signal. Finally, this information is heavily suppressed upon averaging of noisy signals and practically inaccessible in conventional stimulated Raman measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mid-infrared spectroscopy with a broadly tunable thin-film lithium niobate optical parametric oscillator

Mid-infrared spectroscopy, an important technique for sensing molecules, has encountered barriers from sources either limited in tuning range or excessively bulky for widespread use. We present a compact, efficient, and broadly tunable optical parametric oscillator surmounting these challenges. Leveraging dispersion-engineered thin-film lithium niobate-on-sapphire photonics and a singly resonant cavity allows broad, controlled tuning over an octave from 1.5–3.3 µm. The device generates >25mW of mid-infrared light at 3.2 µm with 15% conversion efficiency. The ability to precisely control the device’s mid-infrared emission enables spectroscopy of methane and ammonia, demonstrating our approach’s relevance for sensing. Our work signifies an important advance in nonlinear photonics miniaturization, bringing practical field applications of high-speed, broadband mid-infrared spectroscopy closer to reality.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A 3% SOLUTION: DETERMINATION OF THE HUBBLE CONSTANT WITH THE HUBBLE SPACE TELESCOPE AND WIDE FIELD CAMERA 3

We use the Wide Field Camera 3 (WFC3) on the Hubble Space Telescope (HST) to determine the Hubble constant from optical and infrared observations of over 600 Cepheid variables in the host galaxies of eight recent Type Ia supernovae (SNe Ia), providing the calibration for a magnitude-redshift relation based on 253 SNe Ia. Increased precision over past measurements of the Hubble constant comes from five improvements: (1) more than doubling the number of infrared observations of Cepheids in the nearby SN hosts; (2) increasing the sample size of ideal SN Ia calibrators from six to eight; (3) increasing by 20% the number of Cepheids with infrared observations in the megamaser host NGC 4258; (4) reducing the difference in the mean metallicity of the Cepheid comparison samples between NGC 4258 and the SN hosts from {Delta}log [O/H] = 0.08 to 0.05; and (5) calibrating all optical Cepheid colors with a single camera, WFC3, to remove cross-instrument zero-point errors. The result is a reduction in the uncertainty in H{sub 0} due to steps beyond the first rung of the distance ladder from 3.5% to 2.3%. The measurement of H{sub 0} via the geometric distance to NGC 4258 is 74.8 {+-} 3.1 km s{sup -1} Mpc{sup -1}, a 4.1% measurement including systematic uncertainties. Better precision independent of the distance to NGC 4258 comes from the use of two alternative Cepheid absolute calibrations: (1) 13 Milky Way Cepheids with trigonometric parallaxes measured with HST/fine guidance sensor and Hipparcos and (2) 92 Cepheids in the Large Magellanic Cloud for which multiple accurate and precise eclipsing binary distances are available, yielding 74.4 {+-} 2.5 km s{sup -1} Mpc{sup -1}, a 3.4% uncertainty including systematics. Our best estimate uses all three calibrations but a larger uncertainty afforded from any two: H{sub 0} = 73.8 {+-} 2.4 km s{sup -1} Mpc{sup -1} including systematic errors, corresponding to a 3.3% uncertainty. The improved measurement of H{sub 0}, when combined with the Wilkinson Microwave Anisotropy Probe (WMAP) 7 year data, results in a tighter constraint on the equation-of-state parameter of dark energy of w = -1.08 {+-} 0.10. It also rules out the best-fitting gigaparsec-scale void models, posited as an alternative to dark energy. The combined H{sub 0} + WMAP results yield N{sub eff} = 4.2 {+-} 0.7 for the number of relativistic particle species in the early universe, a low-significance excess for the value expected from the three known neutrino flavors.

79 ASTRONOMY AND ASTROPHYSICS↗

Room-temperature near-infrared silicon carbide nanocrystalline emitters based on optically aligned spin defects

Bulk silicon carbide (SiC) is a very promising material system for bio-applications and quantum sensing. However, its optical activity lies beyond the near infrared spectral window for in-vivo imaging and fiber communications due to a large forbidden energy gap. Here, we report the fabrication of SiC nanocrystals and isolation of different nanocrystal fractions ranged from 600 nm down to 60 nm in size. The structural analysis reveals further fragmentation of the smallest nanocrystals into ca. 10-nm-size clusters of high crystalline quality, separated by amorphization areas. We use neutron irradiation to create silicon vacancies, demonstrating near infrared photoluminescence. Finally, we detect room-temperature spin resonances of these silicon vacancies hosted in SiC nanocrystals. This opens intriguing perspectives to use them not only as in-vivo luminescent markers but also as magnetic field and temperature sensors, allowing for monitoring various physical, chemical, and biological processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗