Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Imagery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Techniques for the creation of land use maps and tabulations from Landsat imagery

Methods for creating color thematic maps and land use tabulations, employing both Landsat imagery and computer image processing, are discussed. The system, the Multiple Input Land Use System (MILUS) has been tested in the metropolitan section of Dayton, Ohio. Training areas for land use were first digitized by coordinates and then transformed onto an image of white lines on a black background. This image was added to a Landsat image of the same area. Then multispectral classification was performed. A tape of digitized census tract boundaries was computer interfaced to yield an image of tract boundaries on a background registered to the thematic land-use map. Using a data management system, the data were then used to produce figures for the area and percent of land use in each tract. Future work is expected to convert most of the steps into interactive processing. This would greatly reduce the time needed to edit and register the data sets.

Angelici, G. L.↗

Removal of atmospheric effects from satellite imagery of the oceans

The paper analyzes the effects of atmospheric and sea surface scattering on the determination of ocean color from satellite imagery and proposes an algorithm for removing a large portion of these effects. The algorithm is based on the observations that (1) the upward radiance from the unwanted photons can be divided into effects resulting from Rayleigh scattering alone and those resulting from aerosol scattering alone, (2) the aerosol scattering phase function should be nearly independent of wavelength, and (3) the Rayleigh component can be computed without a knowledge of the sea surface roughness. The ratio of the aerosol optical thickness at the wavelength of interest to the aerosol optical thickness at 750 nm is used in the algorithm since it is assumed that the ocean is totally absorbing in a band of wavelengths around 750 nm. The calculation of this ratio from satellite measurements alone and the accuracy of the procedure are considered.

Gordon, H. R.↗

Soviet meteor satellite imagery

Through the cooperative efforts of several agencies, Soviet Meteor satellite visual and infrared (IR) imagery is now being received and processed outside the U.S.S.R. borders. Observations have been made on the data receipt, processing, and subsequent picture quality of the Meteor/APT (Automatic Picture Transmission) system as received by the Cape Canaveral Forecast Facility.

Diesen, B. C., III↗

Evaluation of reforested areas using LANDSAT imagery

The author has identified the following significant results. Visual and automatic interpretation of LANDSAT imagery was used to classify the general Pinus and Eucalyptus according to their age and species. A methodology was derived, based on training areas, to define the legend and spectral characteristics of the analyzed classes. Imager analysis of the training areas show that Pinus taeda is separable from the other Pinus species based on JM distance measurement. No difference of JM measurements was observed among Eucalyptus species. Two classes of Eucalyptus were separated according to their ages: those under and those over two years of age. Channel 6 and 7 were suitable for the discrimination of the reforested classes. Channel 5 was efficient to separated reforested areas from nonforested targets in the region. The automatic analysis shows the highest classification precision was obtained for Eucalyptus over two years of age (95.12 percent).

Dejesusparada, N.↗

Large Area Crop Inventory Experiment (LACIE). Detection of episodic phenomena on LANDSAT imagery

The author has identified the following significant results. Episodic phenomena such as rainfall shortly before data pass, thin translucent clouds, cloud shadows, and aircraft condensation trails and their shadows are responsible for changes in the spectral reflectivities of some surfaces. These changes are readily detected on LANDSAT full-frame imagery. Histograms of selected areas in Kansas show a distinct decrease in mean radiance values, but also, an increase in scene contrast, in areas where recent rains had occurred. Histograms from a few individual fields indicate that the mean radiance values for winter wheat followed a different trend after a rainfall than alfalfa or grasses.

Chesnutwood, C. M.↗

Eulusmap: An international land resources map utilizing satellite imagery

In 1972, the International Geographical Union's Commission on World Land Use Survey adopted a project for a land-use map of Europe. Such a map, under the name Eulusmap was started earlier under sponsorship of several government offices in Hungary. Although there was great response from a number of contributors in many countries, it became evident by mid-1974 that the map would contain gaps and some inaccuracies unless additional data sources were utilized. By then, the satellite Landsat-1 had obtained imagery of most of Europe. Using theme extraction techniques, the map was completed in draft form and portions of it displayed at the 23d International Geographical Congress in Moscow during July 1976. Printing of the completed map was accomplished in May 1978.

Paludan, T.↗

Stereographic cloud heights from the imagery of two scan-synchronized geostationary satellites

Scan synchronization of the sensors of two SMS-GOES satellites yields imagery from which cloud heights can be derived stereographically with a theoretical two-sigma random uncertainty of + or - 0.25 km for pairs of satellites separated by 60 degrees of longitude. Systematic height errors due to cloud motion can be kept below 100 m for all clouds with east-west components of speed below hurricane speed, provided the scan synchronization is within 40 seconds at the mid-point latitude, and the spin axis of each satellite is parallel to that of the earth.

Minzner, R. A.↗

Eulusmap - An international land resources map utilizing satellite imagery

The paper describes the European land use map ('Eulusmap') sponsored by the World Land Use Survey Commission and printed in May 1978. The map was compiled on the basis of theme extraction techniques applied to Landsat-1 imagery. Various aspects of Landsat-image analysis are discussed here, and detailed consideration is given to the land-use classification system developed by the World Land Use Survey Commission.

Paludan, T.↗

Techniques for land use change detection using Landsat imagery

A variety of procedures were developed for the delineation of areas of land use change using Landsat Multispectral Scanner data and the generation of statistics revealing the nature of the changes involved (i.e., number of acres changed from rural to urban). Techniques of the Image Based Information System were utilized in all stages of the procedure, from logging the Landsat data and registering two frames of imagery, to extracting the changed areas and printing tabulations of land use change in acres. Two alternative methods of delineating land use change are presented while enumerating the steps of the entire process. The Houston, Texas urban area, and the Orlando, Florida urban area, are used as illustrative examples of various procedures.

Angelici, G. L.↗

The comparison between the synthetic aperture radar imageries and the surface truth of ocean waves

Ocean waves measured offshore of Marineland, Florida, by the synthetic aperture radar (SAR) are compared with the surface truth data. The Fourier transform of SAR imageries are taken and the corrections of the wave directions and wave lengths due to the relative velocities between SAR and waves are considered. Favorable comparisons are obtained for the peak frequencies, wave directions, and directional distributions. However, the one-dimensional SAR spectra are quite different from the surface truth wave height spectra.

Hsiao, S. V.↗

Geologic interpretation from composited radar and Landsat imagery

Dual polarization L-band (lambda = 25 cm) radar imagery and Landsat multispectral scanner (MSS) data from central Death Valley have been computer processed and combined digitally in order to utilize the complementary information contained in multisensor data sets. Physically, like-polarized radar data gives roughness information on a scale proportional to radar wavelength. Cross-polarized data adds information on the overall roughness, particle shape, and packing density. Visible and near IR reflectivities pertain to surface chemistry. Surficial geologic units in Death Valley are defined on the basis of compositional and textural differences: optical and microwave scattering properties encoded in the multisensor image are sufficient to discriminate most of the units. This synergistic effect is most pronounced for the alluvial fans. Using radar scattering data and measured sun angle, passively-sensed (passive microwave, visible, near IR) images can be corrected for shadowing effects.

Daily, M. I.↗

Developing in situ flood estimators using multi-date Landsat imagery

Landsat satellite imagery is being used as the primary source of information on flooding in the Black River Basin of northern New York State. Landsat images (Band 7) depicting flood conditions during several flood seasons since 1973 were obtained for analysis. Visual interpretation of these images is providing the basis for quantitatively relating in situ measurements of river discharge with the total area and geographic locations of inundation. This, in turn, will provide real-time estimation of flood losses over the entire river basin. This practical and inexpensive approach can provide sufficiently reliable information, and is applicable in other similar river basins.

Mcleester, J. N.↗

Map-guided interpretation of remotely-sensed imagery

A map-guided approach to interpretation of remotely sensed imagery is described, with emphasis on applications involving continuous monitoring of predetermined ground sites. Geometric correspondence between a sensed image and a symbolic reference map is established in an initial stage of processing by adjusting parameters of a sensor model so that image features predicted from the map optimally match corresponding features extracted from the sensed image. Information in the map is then used to constrain where to look in an image and what to look for. With such constraints, previously intractable remote sensing tasks can become feasible, even easy, to automate. Four illustrative examples are given, involving the monitoring of reservoirs, roads, railroad yards, and harbors.

Tenenbaum, J. M.↗

Influence of coolant tube curvature on film cooling effectiveness as detected by infrared imagery

Thermal film cooling footprints observed by infrared imagery from straight, curved, and looped coolant tube geometries are compared. It was hypothesized that the differences in secondary flow and in the turbulence structure of flow through these three tubes should influence the mixing properties between the coolant and the main stream. A flow visualization tunnel, an infrared camera and detector, and a Hilsch tube were employed to test the hypothesis.

Papell, S. S.↗

Generation of uniform chromaticity scale imagery from LANDSAT data

An algorithm is presented for generating uniform chromaticity scale (UCS) imagery from multispectral data. A computer program was written to implement the algorithm, and UCS film products were generated. The colors in the film and their temporal change are consistent with those expected for the particular scaling of Krauth components into the (lab) color space. The film product was not subjected to the practical test of competing with previous transformations. Preliminary examination indicates that the product offers the following possibilities: (1) a single film product that will supplant two film products in current use; (2) improved visibility of data differences in regions in data space that are critical to crop identification; and (3) an analytic route to the determination of data-space transformations that will be optimal for particular discrimination problems.

Juday, R. D.↗

Coolant tube curvature effects on film cooling as detected by infrared imagery

Reported herein are comparative thermal film cooling footprints observed by infrared imagery from straight, curved and looped coolant tube geometries. It was hypothesized that the difference in secondary flow and turbulence structure of flow through these three tubes should influence the mixing properties between the coolant and mainstream. The coolant was injected across an adiabatic plate through a hole angled at 30 deg to the surface in line with the free stream flow. The data cover a range of blowing rates from 0.37 to 1.25 (mass flow per unit area of coolant divided by free stream). Average temperature difference between coolant and tunnel air was 25 C. Data comparisons confirmed that coolant tube curvature significantly influences film cooling effectiveness.

Papell, S. S.↗

Utilizing LANDSAT imagery to monitor land-use change - A case study in Ohio

A study, performed in Ohio, of the nature and extent of interpretation errors in the application of Landsat imagery to land-use planning and modeling is reported. Potential errors associated with the misalignment of pixels after geometric correction and with misclassification of land cover or land use due to spectral similarities were identified on interpreted computer-compatible tapes of a portion of Franklin County for two adjacent days of 1975 and one day of 1973, and the extents of these errors were quantified by comparison with a ground-checked set of aerial-photograph interpretations. The open-space and agricultural categories are found to be the most consistently classified, while the more urban areas were classified correctly only from about 43 to 8% of the time. It is thus recommended that the direct application of Landsat data to land-use planning must await improvements in classification techniques and accuracy.

Gordon, S. I.↗

Nimbus-7 coastal zone color scanner - System description and initial imagery

Initial imagery from the Nimbus-7 Coastal Zone Color Scanner (CZCS) shows subtle variations in water color. Organisms, especially phytoplankton, play a major influence on the variations in water color. Processing of the visual data is described, and in particular, the use of an algorithm to remove aerosol from the image is discussed. Data on the six spectral bands (433-12,500 nm) are presented and comparisons are made between the CZCS and the Landsat-1 multispectral scanner. The implications for management of fisheries is noted.

Hovis, W. A.↗