Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYPERVELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Lunar soil movement registered by the Apollo 17 cosmic dust experiment

The paper describes the Lunar Ejecta and Meteorites (LEAM) experiment of the Apollo 17 flight mission, placed in the Taurus-Littrow area of the moon. The objective of the experiment was to measure impact parameters of cosmic dust on the lunar surface. Preliminary data analysis led to the recognition that the bulk of events recorded by the LEAM experiment are not signatures of hypervelocity cosmic dust particles as expected, but are induced signatures of electrostatically charged and transported lunar fines.

Berg, O. E.↗

New evidence for impact origin of the Bushveld Complex, South Africa

The importance of hypervelocity impacts as a geologic process is demonstrated by the example of the Bushveld Complex and the (nearby) Vredefort Ring. Each is interpreted as the result of four simultaneous impacts modified by large-scale endogenic processes triggered by the impact event. The layered mafic sequence and the voluminous red granite associated with the complex are endogenic magmas, probably generated by pressure release accompanying crater excavation. Shock melting of older sedimentary rocks must have produced a layer of impact melt (the Rooiberg Felsite), the upper part of which was extruded over its originally chilled crust as a series of thick lava flows. Field evidence and radiometric age determinations indicate that the Bushveld Complex formed approximately 2000 billion years ago.

Rhodes, R. C.↗

Magnetic effects of shock and their implications for lunar magnetism. II

Synthetic breccias were produced by hypervelocity impact of projectiles on basalt powders in order to study the magnetization acquired during shock lithification of soil. It was found that some of the lithified products record the field at the point where they land, while others carry the original primary remanence. Even those rocks recording the direction of the ambient field did not always faithfully record the intensity of the field. When rocks were exposed to shock, it was found that the magnetic hardness of a rock has a profound effect on its magnetic response. Shock effects are seen at shock levels of less than 10 kbar, which suggests that lunar samples may have been shock-demagnetized.

Cisowski, S. M.↗

Flow characteristics in an expansion tunnel as inferred from velocity measurements

A photoionization technique was used to study flow characteristics in an expansion tunnel. Vertical surveys of the axial component of flow velocity just downstream from the nozzle exit were obtained, and estimates of freestream density were inferred from the velocity measurement technique. The pitot pressure was measured and compared to the average axial component of velocity as a function of time for the two cases when air and CO2 were used as test gases. Vertical velocity and static density profiles at the nozzle exit are presented for the case when CO2 was used as test gas. Experimental results were used to determine the diameter and uniformity of the test core at the nozzle exit and the duration of the quasi-steady flow period. These data are relevant to evaluation of the suitability of operating an expansion tube as an expansion tunnel. The expansion tunnel is an expansion tube with a conical nozzle positioned at the exit of the acceleration section, so that nozzle entrance flow conditions are hypersonic and characterized by hypervelocity.

Miller, C. G.↗

Missile impact craters (White Sands Missile Range, New Mexico) and applications to lunar research: Contributions to astrogeology

Craters in natural materials at White Sands Missile Range, N. Mex., were produced by the impact of high-velocity to hypervelocity missiles traveling along oblique trajectories with kinetic energies between 2.1 and 81 × 1014 ergs. The oblique impacts produce craters 2 to 10 m across with morphologies and ejecta that are bilaterally symmetrical with respect to the plane of the missile trajectory. Rims are high and the amount of ejecta large in down-trajectory and lateral directions, whereas rims are low to nonexistent and ejecta thin to absent up-trajectory. Symmetry development and modifications of the symmetry are a function of target material, local topography, and angle of impact. Seven mappable units can be recognized in and around the craters. Three of these are ejecta: thick ejecta near the crater, thin to discontinuous ejecta at greater distances, and scattered ejecta at the greatest distances to the limit of throwout. These ejecta units may be absent on the up-trajectory side; if present, they are rarely as thick or continuous as on other sides of the crater. Three units are target materials: undeformed target material exposed in local patches through thin to discontinuous ejecta and everywhere between the fragments of scattered ejecta, tilted and broken target material exposed in upper crater walls, and shattered and fractured target material exposed on the up-trajectory crater wall. The seventh unit is slope material composed of talus and fallback within the crater. Development, character, and exposure of these units varies chiefly with the target material. Ejecta from the craters is chiefly broken but relatively undeformed target material that may range in size from very fine grained debris to large blocks. Where the target is porous, significant amounts of the ejecta are composed of sheared and compressed fragments, some coated with dark layers of mixed projectile pieces, powder, and fused metal mixed with crushed target material. For layered targets, the original stratigraphic sequence is crudely preserved and in inverted order in thick ejecta. Secondary impact craters are produced by the impact of ejected fragments when the surrounding surface materials are sufficiently weak. A wide variety of secondary impact crater relations may result. Secondary craters nearest the primary crater have blocks in them that are larger than or the same size as the crater they produced. Farther from the primary crater, the fragments are generally smaller than the secondary crater and are ejected from it. Excavation of four craters revealed a mixed breccia beneath the crater floor composed of missile pieces, sheared and compressed target material, and crushed debris. Banded, disaggregated target material and nonmixed breccia surrounded the mixed breccia, and these breccias were surrounded by a zone of conjugate fractures. Beneath the ejecta on the lateral and down-trajectory crater flanks, the target materials were tilted upward and broken. Up-trajectory, open fractures and downward displacement occurred in two of the craters. No displacement was observed for the other two. Beneath the down-trajectory rims of craters with distinct layering, overturned synclines were observed. Missile breakup and behavior during cratering are a function of target and missile properties. Missile breakup depends on missile velocity and is most extensive at high velocities, where the missile is fragmented, powdered, and partly fused. Burial of missile or its fragmented, powdered, and fused remains is greatest for porous targets and least for dense cohesive targets. For very porous targets, camouflet structures containing the fragmented missile may form. Least squares fit to the data on craters in dry to moist targets indicate V(a) = 10^(-11.433)E(p)^(1.205) where V(a) is the volume of the apparent crater and E(p) is the kinetic energy of the missile. This equation is consistent with expectations of the equations relating apparent depth and radius to kinetic energy. Extrapolation of displaced masses and kinetic energies for laboratory impacts with sand and rock converge near 10^(15) to 10^(16) ergs, where the extrapolations are near the data on missile impact craters, corrected for impact angle. Displaced masses of craters produced by missile impacts and by chemical explosives with small scaled depths of burial are about the same when the kinetic energies of the missiles (corrected for angle of impact) are equal to the TNT equivalent energy of the explosive. The problem of equivalent scaled depth of burst for an impact crater is complicated and not entirely resolved, however. Both missile impact craters and chemical explosive craters in water-saturated targets are larger than their counterparts in dry to moist materials. Data collected during the study of missile impact craters have helped resolve a number of problems in lunar research: (1) the soillike nature of lunar surface materials was predicted, (2) sizes of craters produced by artificial impacts were correctly predicted, (3) certain features imaged by Surveyor were found to be analogous to features associated with missile impact craters, {4) missile impacts were used in support of the Apollo passive seismic experiment, (5) craters seen in Apollo orbital photographs were found to be similar to some missile impact craters, (6) missile impact craters supplied data on sample collection and crater phenomenology used in training astronauts, and (7) some returned lunar samples are similar to coated, sheared, and compressed fragments ejected from missile impact craters.

H. J. Moore↗

Operational experience in the Langley expansion tube with various test gases

The Langley Expansion Tube is an operational facility capable of producing good quality, highly repeatable, quasi-steady flow for test times sufficient to establish flow about blunt axisymmetric and two-dimensional models. Due to the capability of testing with arbitrary test gases, a wide range of real-gas, hypersonic-hypervelocity flow conditions may be generated. However, for a given test gas, the range of operating conditions producing useful flow is shown to be rather limited; hence, the facility yields a given flow condition for a given test gas, and variation in flow conditions comes about by using different test gases. Data are presented for operations using air and carbon dioxide as test gases. The driver gas was unheated helium at a nominal pressure of 5000 psi (34.5 MN sq m).

Miller, C. G.↗

A critical examination of expansion tunnel performance

An experimental study of the performance of the expansion tunnel for various test gases and range of quiescent acceleration section and nozzle pressure, nozzle geometric area ratio, and nozzle axial station has been performed. Flow diagnostics used to examine expansion tunnel flow characteristics were time histories and profiles of pitot pressure and axial component of flow velocity. The purpose of this study was to determine experimentally what limitations might restrict predicted operational flexibility and the advantages and disadvantages of this mode of operation as compared to the expansion tube. Results are presented which demonstrate the expansion tunnel offers several advantages over the expansion tube, but the severity of the disadvantages of the tunnel makes the expansion tube mode of operation the more desirable for performing hypersonic-hypervelocity aerothermodynamic studies of proposed entry configurations.

Miller, C. G.↗

Tabular comparisons of the Flynn Creek impact crater, United States, Steinheim impact crater, Germany and Snowball explosion crater, Canada

A tabular outline of comparative data is presented for 340 basic dimensional, morphological, and structural parameters and related aspects for three craters of the flat-floored, central uplift type, two of which are natural terrestrial impact craters and one is a large-scale experimental explosion crater. The three craters are part of a general class, in terms of their morphology and structural deformation that is represented on each of the terrestrial planets including the moon. One of the considered craters, the Flynn Creek Crater, was formed by a hypervelocity impact event approximately 360 m.y. ago in what is now north central Tennessee. The impacting body appears to have been a carbonaceous chondrite or a cometary mass. The second crater, the Steinheim Crater, was formed by an impact event approximately 14.7 m.y. ago in what is now southwestern Germany. The Snowball Crater was formed by the detonation of a 500-ton TNT hemisphere on flat-lying, unconsolidated alluvium in Alberta, Canada.

Roddy, D. J.↗

Shock effects from a large impact on the moon

The paper calculates the shock and shear deformation-induced internal energy distribution associated with a major basin-forming hypervelocity meteorite impact on the moon. The Hageman and Walsh formulation of the axisymmetric two-dimensional conservation equations in finite difference form is used, and the flow field induced upon impact of an iron meteorite traveling at 15 km/sec with a gabbroic anorthosite lunar crust is calculated for sequential time steps over a grid of hoop-shaped zones fixed in space. If an energy of 5 times 10 to the 32nd power ergs for the projectile energy is required to excavate a basin of Imbrium size, than a flow field of approximately 210 km in radius approximately 19 seconds after impact is indicated. The meteorite residue, the melt, and the ejecta are discussed, and the results are compared with the Gault and Heitowit (1963) formulation.

Okeefe, J. D.↗

Impact cratering calculations. Part 1: Early time results

Early time two dimensional finite difference calculations of laboratory scale hypervelocity impact of 0.3 g spherical 2024 aluminum projectiles into homogeneous plasticene clay targets were performed. Analysis of resulting material motions showed that energy and momentum were coupled quickly from the aluminum projectile to the target material. In the process of coupling, some of the plasticene clay target was vaporized while the projectile become severely deformed. The velocity flow field developed within the target was shown to have features similar to those found in calculations of near surface explosion cratering. Specific application of Maxwell's analytic Z-Model showed that this model can be used to describe the early time flow fields resulting from the impact cratering calculations as well, provided the flow field centers are located beneath the target surface and most of the projectile momentum is dissipated before the model is applied.

Thomsen, J. M.↗

Experimental studies of oblique impact

Meteoritic materials most probably impact planetary bodies along oblique trajectories inclined less than 45 deg above their surfaces. Laboratory studies of hypervelocity impacts against rock and particulate media are presented that indicate important effects of obliquity on crater size, shape, and ejecta distribution. The effects are particularly important to crater size-frequency analyses and geologic interpretations of crater formations. Impacts at shallow incidence, which are not uncommon, lead to ricochet of the impacting object accompanied with some entrained excavated materials at velocities only slightly reduced from the pre-impact value.

Gault, D. E.↗

A model for chemical and isotopic fractionation in the lunar regolith by impact vaporization

Up until now there has been no complete model of chemical and isotopic fractionation effects which could occur in the lunar regolith as a result of hypervelocity impact vaporization. Previous work on the outlines for such a model are extended and show that impact vaporization could be an efficient mechanism for producing heavy isotope enrichments. Rough qualitative predictions based on the model show a general similarity to the observations on lunar samples.

Housley, R. M.↗

Calculational investigation of impact cratering dynamics - Early time material motions

Early time two-dimensional finite difference calculations of laboratory-scale hypervelocity (6 km/sec) impact of 0.3 g spherical 2024 aluminum projectiles into homogeneous plasticene clay targets were performed and the resulting material motions analyzed. Results show that the initial jetting of vaporized target material is qualitatively similar to experimental observation. The velocity flow field developed within the target is shown to have features quite similar to those found in calculations of near-surface explosion cratering. Specific application of Maxwell's analytic Z-Model (developed to interpret the flow fields of near-surface explosion cratering calculations), shows that this model can be used to describe the flow fields resulting from the impact cratering calculations, provided that the flow field center is located beneath the target surface, and that application of the model is made late enough in time that most of the projectile momentum has been dissipated.

Thomsen, J. M.↗

Meteorite impact in the ocean

In the present study, the dynamic of hypervelocity impacts and crater formation in water are examined with allowance for the unique properties of water. More precisely, the transient crater calculated is permitted to relax and act as a source of oceanic surface waves.

Strelitz, R.↗

Low-velocity impact craters in ice and ice-saturated sand with implications for Martian crater count ages

The paper reports on a series of low-velocity impact experiments performed in ice and ice-saturated sand. It is found that crater diameters in ice-saturated sand were about 2 times larger than in the same energy and velocity range in competent blocks of granite, basalt and cement, while craters in ice were 3 times larger. It is shown that if this dependence of crater size on strength persists to large hypervelocity impact craters, then surface of geologic units composed of ice or ice-saturated soil would have greater crater count ages than rocky surfaces with identical influx histories. Among the conclusions are that Martian impact crater energy versus diameter scaling may also be a function of latitude.

Croft, S. K.↗

Sources of orbital debris and the projected environment for future spacecraft

The major source of the nearly 5000 objects currently observed orbiting the earth is from rocket explosions. These explosions have almost certainly produced an even larger unobserved population. If the current trend continues, collisions between orbiting fragments and other space objects could be frequent. By the year 2000 satellite fragmentation by hypervelocity collisions could become the major source of earth orbiting objects, resulting in a self propagating debris belt. The flux within this belt could exceed the meteoroid flux, affecting future spacecraft design.

Kessler, D. J.↗

Hypersonic and planetary entry flight mechanics

The book treats hypersonic flight trajectories and atmospheric entry flight mechanics in light of their importance for space shuttle entry. Following a review of the structures of planetary atmospheres and aerodynamic forces, equations are derived for flight over a spherical planet, and the performance of long-range hypervelocity vehicles in extra-atmospheric flight is analyzed. Consideration is then given to vehicle trajectories in the powered and atmospheric reentry phases of flight, and several first-order solutions are derived for various planetary entry situations. The second-order theory of Loh for entry trajectories is presented along with the classical theories of Yaroshevskii and Chapman for entry into planetary atmospheres, and the thermal problems encountered in hypersonic flight are analyzed. A unified theory for entry into planetary atmospheres is then introduced which allows the performance of a general type of lifting vehicle to be studied, and applied to the analysis of orbit contraction due to atmospheric drag, flight with lift modulation and lateral maneuvers.

Vinh, N. X.↗

Flow field investigation of atmospheric braking for high drag vehicles with forward facing jets

Flow field phenomena associated with a supersonic jet issuing upstream into a hypervelocity flow field were investigated experimentally in support of a new space vehicle aerobraking concept developed by Boeing for Orbital Transfer Vehicles (OTV's). Tests were made on OTV models in the NASA Langley 22 in., Mach 20 helium tunnel with jet exit Mach numbers from 1.0 to 6.18 and ballute half angles of 45 and 60 deg. Force data were taken at zero angle of attack to determine the effect of ballute angle, jet Mach number and jet flow rate on vehicle drag. Bow shock structures were examined in terms of flow steadiness to define acceptable jet flow rate regimes for use in drag modulation. Limited tests were made to obtain pressure and temperature distributions around the ballute and to determine the ballute center of pressure. Test results are presented and discussed relative to OTV application and similar previous experimental investigations.

Grenich, A. F.↗