Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Metabolic engineering of oleaginous yeast Rhodotorula toruloides for overproduction of triacetic acid lactone

Abstract The plant‐sourced polyketide triacetic acid lactone (TAL) has been recognized as a promising platform chemical for the biorefinery industry. However, its practical application was rather limited due to low natural abundance and inefficient cell factories for biosynthesis. Here, we report the metabolic engineering of oleaginous yeast Rhodotorula toruloides for TAL overproduction. We first introduced a 2‐pyrone synthase gene from Gerbera hybrida ( GhPS ) into R. toruloides and investigated the effects of different carbon sources on TAL production. We then systematically employed a variety of metabolic engineering strategies to increase the flux of acetyl‐CoA by enhancing its biosynthetic pathways and disrupting its competing pathways. We found that overexpression of ATP‐citrate lyase (ACL1) improved TAL production by 45% compared to the GhPS overexpressing strain, and additional overexpression of acetyl‐CoA carboxylase (ACC1) further increased TAL production by 29%. Finally, we characterized the resulting strain I12‐ ACL1‐ACC1 using fed‐batch bioreactor fermentation in glucose or oilcane juice medium with acetate supplementation and achieved a titer of 28 or 23 g/L TAL, respectively. This study demonstrates that R. toruloides is a promising host for the production of TAL and other acetyl‐CoA‐derived polyketides from low‐cost carbon sources.

2‐pyrone synthase↗

Shock treatment of corn stover

In this work, corn stover digestibility was enhanced via shock treatment. A slurry of lime-treated corn stover was placed in a partially filled closed vessel. From the ullage space, either a shotgun shell was fired into the slurry, or a gas mixture was detonated. Various conditions were tested (i.e., pressures, depth, solids concentrations, gas mixtures). A high pressurization rate (108,000 MPa/s shotgun shells; 4,160,000 MPa/s hydrogen/oxygen detonation) was the only parameter that improved enzymatic digestibility. Stoichiometric propane/air deflagration had a low pressurization rate (37.2 MPa/s) and did not enhance enzymatic digestibility. Without shock, enzymatic conversion of lime-treated corn stover was 0.80 g glucan digested/g glucan fed with an enzyme loading of 46.7 mg protein/g glucan. With shock, the enzyme loading was reduced by ~2× while maintaining the same conversion. Detonations are extraordinarily fast; rapidly cycling three small vessels (0.575 m 3 each) every 7.5 s enables commercially relevant shock treatment (2,000 tone/day).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Immobilized purple bacteria for light-driven H2 production from starch and potato fermentation effluents

The goal of the study was to show that immobilized purple bacteria could photoproduce H2 using dark fermentation effluent (FE) as substrate. Simple pretreatment of an inexpensive glass-fiber matrix accelerated the immobilization process. Photobioreactors (PhBR) containing immobilized Rhodobacter sphaeroides GL produced 0.128 L H2 h-1 L-1 of PhBR volume (0.570 L h-1 L-1 of matrix) for upto 3 months when continuously fed artificial media with volatile fatty acids (VFAs) or FE from potato and starch fermentations. Hydrogen production was insensitive to NH4+ up to 1 mM and saturated at 8 mM lactate or 1.5% potato FE (diluted in water and supplemented with critical micronutrients). The efficiency of VFA transformation to H2 was 50-70% of theoretical. At nonlimiting substrateconcentrations in artificial media or FE, acetate was utilized before butyrate. High volumetric rates of continuous H2 photoproduction and stability of the process are advantages of using immobilized cultures. Use of H2 photoproduction as a polishing step in the treatment of FEs from dark fermentations increased the total amount of H2 produced from 0.9 to 4.7 mol mol-1 glucose equivalent inthe original potato homogenate.

08 HYDROGEN↗

Vapor-Phase Hydrodeoxygenation of Guaiacol to Aromatics over Pt/HBeta: Identification of the Role of Acid Sites and Metal Sites on the Reaction Pathway

Hydrodeoxygenation of guaiacol, a phenolic compound derived from lignin fraction of biomass, over a Pt/HBeta catalyst at 350 °C and atmospheric pressure produces benzene, toluene, xylenes, and C9+ aromatics with yield of 42%, 29%, 12%, and 5%, respectively. Reaction pathways for conversion of two functional groups (hydroxyl and methoxyl) over the bifunctional catalyst were studied. Both guaiacol and intermediate products (catechol and cyclopentanone) were fed onto zeolite HBeta and Pt/SiO2 to identify the individual role of acid site and metal site. Acid sites (mainly Brønsted acid site, BAS) catalyze transalkylation and dehydroxylation reactions in sequence, producing phenol, cresols and xylenols as the major products at high conversion. Pt sites catalyze demethylation reaction resulting in catechol as the primary product, which can either be deoxygenated to phenol followed by phenol to benzene, or decarbonylated to cyclopentanone and further to butane. The close proximity of Pt and BAS in bifunctional Pt/HBeta enables both transalkylation and deoxygenation reactions with inhibited demethylation and decarbonylation reactions, producing aromatics as major final products with a total yield > 85%. Both activity and stability of bifunctional Pt/HBeta during hydrodeoxygenation of guaiacol is improved compared to HBeta and Pt/SiO2. The addition of water to the feed further improves the activity and stability via hydrolysis of O-CH3 bond of guaiacol on BAS and removing coke around Pt.

Nie, Lei↗

Inferring pesticide toxicity to honey bees from a field‐based feeding study using a colony model and Bayesian inference

Abstract Honey bees are crucial pollinators for agricultural crops but are threatened by a multitude of stressors including exposure to pesticides. Linking our understanding of how pesticides affect individual bees to colony‐level responses is challenging because colonies show emergent properties based on complex internal processes and interactions among individual bees. Agent‐based models that simulate honey bee colony dynamics may be a tool for scaling between individual and colony effects of a pesticide. The U.S. Environmental Protection Agency (USEPA) and U.S. Department of Agriculture (USDA) are developing the VarroaPop + Pesticide model, which simulates the dynamics of honey bee colonies and how they respond to multiple stressors, including weather, Varroa mites, and pesticides. To evaluate this model, we used Approximate Bayesian Computation to fit field data from an empirical study where honey bee colonies were fed the insecticide clothianidin. This allowed us to reproduce colony feeding study data by simulating colony demography and mortality from ingestion of contaminated food. We found that VarroaPop + Pesticide was able to fit general trends in colony population size and structure and reproduce colony declines from increasing clothianidin exposure. The model underestimated adverse effects at low exposure (36 µg/kg), however, and overestimated recovery at the highest exposure level (140 µg/kg), for the adult and pupa endpoints, suggesting that mechanisms besides oral toxicity‐induced mortality may have played a role in colony declines. The VarroaPop + Pesticide model estimates an adult oral LD 50 of 18.9 ng/bee (95% CI 10.1–32.6) based on the simulated feeding study data, which falls just above the 95% confidence intervals of values observed in laboratory toxicology studies on individual bees. Overall, our results demonstrate a novel method for analyzing colony‐level data on pesticide effects on bees and making inferences on pesticide toxicity to individual bees.

59 BASIC BIOLOGICAL SCIENCES↗

Incorporating Oxygen Uncoupling Kinetics into Computational Fluid Dynamic Simulations of a Chemical Looping System

Chemical looping with oxygen uncoupling (CLOU) is a carbon-capture technology that utilizes a metal oxide as an oxygen carrier to separate oxygen from air and releases gaseous O 2 into a reactor where fuel is fed. Earlier experimental and simulated work has been performed on systems less than 1 MW. Previous work has been limited to one-dimensional kinetic simulations. Literature kinetics were modified to work in a Barracuda-VR simulation package. A simplified spreadsheet model was used to verify the Barracuda-VR simulation adaption of the kinetics to previously published results. The simulated kinetics, literature models, and raw data matched well. The adapted kinetics were then incorporated into a 10 kW dual bubbling bed CLOU system three-dimensional simulation. The simulations predicted carbon capture efficiency similar to that reported previously for similar systems. The solid circulation rate, temperature profile, and gas concentration profiles followed the expected trends. The overall three-dimensional simulation of kinetics showed reasonable results for what has been previously reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Periphyton and abiotic factors influencing arsenic speciation in aquatic environments: Periphyton alters arsenic speciation

Benthic periphytic biofilms are important food sources at the base of aquatic ecosystems. These biofilms also sit at the interface of oxic waters and hypoxic sediments, and can be influenced by or influence trace element speciation. In the present study, we compared arsenic (As) enrichment in periphyton exposed to arsenate (As[V]) or arsenite (As[III]) (20 μg/L, static renewal, 7 d), and we found similar accumulation patterns of total As (101 ± 27 and 88 ± 22mgkg -1 dry wt, respectively). Periphyton As was 6281- and 6684-fold higher than their aqueous exposures and occurred primarily as As(V). When these biofilms were fed to larval mayflies, similar total As tissue concentrations (13.9 and 14.6mgkg -1 dry wt, respectively) were observed, revealing significant biodilution (~10% of their dietary concentrations). Finally, we investigated the influence of aeration and periphyton presence on As speciation in solutions and solid phases treated with As(III). Predominantly As(III) solutions were slowly oxidized over a 7-d time period, in the absence of periphyton, and aeration did not strongly affect oxidation rates. However, in the presence of periphyton, solution and solid-phase analyses (by microscale x-ray absorption spectroscopy) showed rapid As(III) oxidation to As(V) and an increasing proportion of organo-As forming over time. Thus periphyton plays several roles in As environmental behavior: 1) decreasing total dissolved As concentrations via abiotic and biotic accumulation, 2) rapidly oxidizing As(III) to As(V), 3) effluxing organo-As forms into solution, and 4) limiting trophic transfer to aquatic grazers.

59 BASIC BIOLOGICAL SCIENCES↗

Long-term hydrological, biogeochemical, and climatological data from Walker Branch Watershed, East Tennessee, USA

In 1967, the original Walker Branch Watershed (WBW) project was established to study elemental cycling and mass balances in a relatively unimpacted watershed. Over the next 50+ years, findings from additional experimental studies and long-term observations on WBW advanced understanding of catchment hydrology, biogeochemistry, and ecology and established WBW as a seminal site for catchment science. The 97.5-ha WBW is located in East Tennessee, USA, on the U.S. Department of Energy's Oak Ridge Reservation. Vegetation on the watershed is characteristic of an eastern deciduous, second-growth forest. The watershed is divided into two subcatchments: the West Fork (38.4 ha) and the East Fork (59.1 ha). Headwater streams draining these subcatchments are fed by multiple springs, and thus flow is perennial. Stream water is high in base cations due to weathering of dolomite bedrock and nutrient concentrations are low. Long-term observations of climate, hydrology, and biogeochemistry include daily (1969–2014) and 15-min (1994–2014) stream discharge and annual runoff (1969–2014); hourly, daily, and annual rainfall (1969–2012); daily climate and soil temperature (1993–2010); and weekly stream water chemistry (1989–2013). These long-term datasets are publicly available on the WBW website (https://walkerbranch.ornl.gov/long-term-data/). While collection of these data has ceased, related long-term measurements continue through the National Ecological Observatory Network (NEON), where WBW is the core terrestrial and aquatic site in the Appalachian and Cumberland Plateau region (NEON's Domain 7) of the United States. These long-term datasets have been and will continue to be important in evaluating the influence of climatic and environmental drivers on catchment processes.

54 ENVIRONMENTAL SCIENCES↗

Continuous enzymatic hydrolysis of lignocellulosic biomass in a membrane-reactor system: Continuous enzymatic hydrolysis of lignocellulosic biomass in a membrane-reactor system

Converting abundant lignocellulosic biomass to sugars as fungible precursors to fuels and chemicals has the potential to diversify the supply chain for those products, but further process improvements are needed to achieve economic viability. In the current work, process intensification of the key enzymatic hydrolysis unit operation is demonstrated by means of a membrane reactor system that was operated continuously. Lignocellulosic biomass (pretreated corn stover) and buffered enzyme solution were fed to a continuously stirred-tank reactor, and clarified sugar solution was withdrawn via a commercial tubular ultrafiltration membrane. The membrane permeance decline and membrane cleaning efficacy were studied and did not vary significantly when increasing fraction insoluble solids (FIS) from 2.5% to 5%. Continuous enzymatic hydrolysis was successfully operated for more than 80 h. A model for the reactor system was able to predict dynamic behavior that was in reasonable agreement with experimental results. The modeled technical performance of anticipated commercial batch and continuous enzymatic hydrolysis processes were compared and showed that continuous operation would provide at least twice the volumetric productivity for the conditions studied. Further improvements are anticipated by better membrane selection and by increasing FIS.

09 BIOMASS FUELS↗

Qualitative and quantitative profiles of jejunal oligosaccharides and cecal short–chain fatty acids in broiler chickens receiving different dietary levels of fiber, protein and exogenous enzymes

Dietary supplemental carbohydrases are able to degrade non-starch polysaccharides and generate oligosaccharides in the gastrointestinal tract. This study was conducted to investigate the influence of dietary fiber and protein levels on growth performance, nutrient utilization, digesta oligosaccharides profile and cecal short-chain fatty acid (SCFA) profile in broilers receiving diets supplemented with xylanase or protease individually or in combination. Enzyme supplementation had no effect on growth performance. There was significant (P < 0.05) fiber × protein × xylanase interaction for ileal nitrogen digestibility and significant (P < 0.01) protein × xylanase × protease interaction for nitrogen-corrected apparent metabolizable energy. Birds fed high-fiber diets had higher (P < 0.05) jejunal oligosaccharides and cecal SCFA concentrations. Xylanase and protease combination produced the greatest pentose (Pent) levels in low fiber–adequate protein diets but lowest levels in highfiber–low protein diets. There was significant (P < 0.05) fiber × xylanase × protease interaction explained by the digesta concentrations of (Pent) 3 , (Pent) 4 and (Pent) 5 being greatest (P < 0.5) in protease-only supplemented high-fiber diets but lowest in protease-only supplemented low-fiber diets. Furthermore, these results suggest that, of all the factors investigated, dietary fiber level had the greatest effect on modulating digesta concentration of oligosaccharides and cecal SCFA. Evidence points to the fact that there is considerable capacity for generating pentose oligosaccharides in the digestive tract of broilers receiving diets rich in fibrous feedstuffs, and that this may have a beneficial effect on microbial profile in the digestive tract.

59 BASIC BIOLOGICAL SCIENCES↗

Subacute safety assessment of recombinant Lactococcus lactis on the gut microbiota of male Sprague–Dawley rats

Abstract BACKGROUND Lactococcus lactis strain pGSMT/MG1363 is a genetically modified microorganism (GMM) that constitutively expresses human metallothionein‐I fusion protein to combine with intracellular lead. Unlike traditional probiotics, pGSMT/MG1363 lacks a history of safe use in food. Administration of microorganism could influence the gut microbial community and consequently confer health benefits or cause disadvantages to the host. To date, little has been done to assess the influence of recombinant strain pGSMT/MG1363 on the stability of gut microbiota. RESULTS Liver, testis and kidney sections of male Sprague–Dawley rats orally administered pGSMT/MG1363 for 6 weeks showed normal structure and no pathological damage. There were no adverse effects on the analyzed serum biochemical parameters between the pGSMT/MG1363 group and the MG1363 group. Principal coordinate analysis showed that, compared with the MG1363 group, the 6‐week‐old fecal gut microbiota of rats fed with pGSMT/MG1363 was not significantly different (Adonis, P = 0.802). pGSMT/MG1363 treatment for 6 weeks did not significantly change the relative abundance of gut microbiota at the phylum and genus levels in comparison with MG1363 treatment. CONCLUSION Compared to the non‐GM strain MG1363 group, administration of the recombinant strain pGSMT/MG1363 for 6 weeks showed no adverse effects on the analyzed physiological parameters and gut microbial compositions of male Sprague–Dawley rats. The results suggested that, in terms of gut microbiota stability, pGSMT/MG1363 could be considered as safe as MG1363, at least for short‐term intake. Further toxicological evaluations still need to be considered before drawing a definite conclusion concerning the safe use of pGSMT/MG1363. © 2021 Society of Chemical Industry.

Chen, Guowei↗

Variational projection methods for gradient crystal plasticity using Lie algebras

Summary A computational method is developed for evaluating the plastic strain gradient hardening term within a crystal plasticity formulation. While such gradient terms reproduce the size effects exhibited in experiments, incorporating derivatives of the plastic strain yields a nonlocal constitutive model. Rather than applying mixed methods, we propose an alternative method whereby the plastic deformation gradient is variationally projected from the elemental integration points onto a smoothed nodal field. Crucially, the projection utilizes the mapping between Lie groups and algebras in order to preserve essential physical properties, such as orthogonality of the plastic rotation tensor. Following the projection, the plastic strain field is directly differentiated to yield the Nye tensor. Additionally, an augmentation scheme is introduced within the global Newton iteration loop such that the computed Nye tensor field is fed back into the stress update procedure. Effectively, this method results in a fully implicit evolution of the constitutive model within a traditional displacement‐based formulation. An elemental projection method with explicit time integration of the plastic rotation tensor is compared as a reference. A series of numerical tests are performed for several element types in order to assess the robustness of the method, with emphasis placed upon polycrystalline domains and multi‐axis loading. Copyright © 2016 John Wiley & Sons, Ltd.

Truster, Timothy J.↗

Material property characterization of 3D printed polypropylene wood plastic composites

Abstract Wood flour (WF) at 10 wt.% and 20 wt.% loadings was used as a reinforcing filler to enhance the applicability of polypropylene (PP) for 3D printing. After performing printability tests of PP wood plastic composites (WPCs), the mechanical properties of both injection‐molded and 3D‐printed PP WPC specimens were explored. Test specimens were prepared from 3D printed hexagons for analyzing the mechanical properties. Adding WF to neat PP increased the storage modulus and the glass transition temperature while decreasing the degree of crystallinity and the coefficient of thermal expansion, while enhancing the printability of neat PP. The tensile strength, tensile modulus of elasticity, flexural strength, and flexural modulus of elasticity of injection‐molded neat PP improved by up to 21%, 59%, 30%, and 56%, respectively, with 20 wt.% WF. However, the impact strength of injection‐molded neat PP decreased by 85%, with 20 wt.% WF. After 3D printing, the tensile strength and tensile modulus of elasticity of printed neat PP increased by up to 84% and 60%, respectively, with 20 wt.% WF. The flexural strength and flexural modulus of elasticity of neat printed PP remained unchanged compared to those of PP filled with 20 wt.% WF, while the impact strength decreased by 87%. Highlights WF was used as a reinforcement in polypropylene designed for 3D printing A pilot‐scale, pellet‐fed 3D printer was used to print hollow hexagons, and then test specimens were fabricated from these hexagons for mechanical properties The tensile and flexural properties of 3D printed neat polypropylene improved, while the impact strength decreased after adding 20 wt.% WF to the neat PP.

Hwang, Sungjun↗

An autonomous robot for shell and tube heat exchanger inspection

Shell and tube heat exchangers (STHEs) are critical to energy conversion efficiency of power plants. Eddy current examination is a way to evaluate working conditions of these tubes. However, the current testing apparatus requires human to manually insert an eddy current testing (ECT) probe into and extract it out of individual tubes, and meanwhile monitor measurement results for diagnosis. It is a time-consuming and labor-intensive procedure even for an experienced technician. To tackle this challenge, in this study, we developed a robot enabled ECT system for autonomous inspection of STHEs. The robotic platform employs Mecanum wheeled chassis for high mobility, machine vision to locate tube bundle and tube inlets, a rotational Cartesian mechanism to operate at planes with all possible inclinations, and a task-specific mechanism for ECT probe delivery. Machine vision locates tube bundle and tube inlets by an April tag detection algorithm and a Circle Hough Transform algorithm, respectively. Assisted by a guiding cone, the ECT probe is continuously fed into the tubes with a fill factor of 0.819. In conclusion, during this process, the eddy current data are automatically collected and real-time analyzed by convolutional neural networks, showing accuracy of nearly 100% for identifying defective and nondefective tubes and 85% for four types of defective tubes and nondefective tubes.

42 ENGINEERING↗

Toward an Autonomous Workflow for Single Crystal Neutron Diffraction

The operation of the neutron facility relies heavily on beamline scientists. Some experiments can take one or two days with experts making decisions along the way. Leveraging the computing power of HPC platforms and AI advances in image analyses, here we demonstrate an autonomous workflow for the single-crystal neutron diffraction experiments. The workflow consists of three components: an inference service that provides real-time AI segmentation on the image stream from the experiments conducted at the neutron facility, a continuous integration service that launches distributed training jobs on Summit to update the AI model on newly collected images, and a frontend web service to display the AI tagged images to the expert. Ultimately, the feedback can be directly fed to the equipment at the edge in deciding the next-step experiment without requiring an expert in the loop. With the analyses of the requirements and benchmarks of the performance for each component, this effort serves as the first step toward an autonomous workflow for real-time experiment steering at ORNL neutron facilities.

Yin, Junqi↗