Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Extraction of americium, curium, and californium with LN resin from HCl and HNO 3

The uptake of 241 Am, 244 Cm and 249 Cf with LN resin was studied in HCl and HNO3 solutions with concentrations ranging from 0.02 to 2.5 M. There is high uptake at concentrations < 0.1 M in both acids for all three isotopes with decreasing uptake at higher concentrations and negligible extraction at ≥ 0.6 M. Californium has a higher extraction than americium and curium, which are extremely similar. Kinetics studies showed rapid uptake of all three isotopes. Here, column studies were performed to demonstrate the separation of 241 Am and 249 Cf, and a bulk separation including nine stable lanthanides along with 241 Am, 249 Cf, and 88 Y.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2018

New Slag for Nickel Matte Smelting Process and Subsequent Fe Extraction

Large quantities of residual slag with high Fe content are left behind in pyrometallurgical nickel processing. How to separate and recover iron from the high fayalite residue is still a problem because iron mainly exists as iron-magnesium silicate in slag. This article suggests that the slag for nickel smelting is adjusted by increasing the amount of lime, partly instead of quartz, to form liable reduction compounds for subsequent Fe extraction. Based on the thermodynamic analysis and phase diagram of the FeO-SiO{sub 2}-CaO-MgO slag system, the new slag composition was chosen, the suitable melting point of relevant slags was measured, and the phase change was observed. The new slag with a composition of 7 to 9 pct MgO, 10 to 15 pct CaO and 1.5 to 1.8 Fe/SiO{sub 2} was found to work well for nickel matte smelting. With the increase of CaO and decrease of SiO{sub 2} content in slag, Ca(Fe, Mg)Si{sub 2}O{sub 6} and Mg(Ca)Fe{sub 2}O{sub 4} are the main existing phases instead of (Fe, Mg){sub 2}SiO{sub 4} in the residual smelting slag. More than 50 pct of Fe-containing phases are in the form of MgFe{sub 2}O{sub 4} when 15 pct CaO is added, which is what we want because the MgFe{sub 2}O{sub 4} is much better for magnetic separation and reduction than the original (Fe, Mg){sub 2}SiO{sub 4}. In this way, Fe can be much more easily extracted from residual slag and have multipurpose benefits.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Study on the Extraction of Aluminum From Aluminum Dross Using Alkali Roasting and Subsequent Synthesis of Mesoporous γ-Alumina

This study presents a process for recovering aluminum from aluminum dross (an industrial waste product) via an alkali roasting process and using it to synthesize mesoporous γ-alumina. The results show that the inherent chlorides in dross (KCl and NaCl) reduce Al extraction efficiency and should be removed first by water leaching. Use of salt-free dross increases the Al extraction rate (from 85 to 96 pct) within 90 minutes alkali roasting at 923 K (650 °C). In addition, an ammonium bicarbonate byproduct can be obtained from water leaching due to the hydrolysis of AlN, which can be used as a precipitating agent in the boehmite sol preparation. Synthesis of mesoporous γ-alumina was carried out by the sol-gel method with EO{sub 20}PO{sub 70}EO{sub 20} (P123) as a template. The prepared mesoporous γ-alumina was characterized as having a disordered mesostructure with a high pore volume of 1.02 cm{sup 3}/g and surface area of 312 m{sup 2}/g. Thus, we achieved highly efficient utilization of aluminum dross and yielded products with high added value. Mesoporous γ-alumina has potential applications in environmental remediation and catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Generalized Modular Representation Framework for the Synthesis of Extractive Separation Systems

In this work, a systematic process synthesis and intensification method is presented for extractive separation based on the Generalized Modular Representation Framework (GMF). GMF employs a mass/heat exchange module-based superstructure representation, incorporating detailed thermodynamic model, to investigate conventional or intensified process options for nonideal azeotropic separation without a pre-postulation of plausible unit/flowsheet configurations. Orthogonal Collocation is also applied to enhance GMF representation to obtain intra-module operation information and module dimensionality estimation while maintaining model size compactness. Furthermore, entrainer selection, process synthesis, design, and intensification are examined within a single mixed-integer nonlinear optimization (MINLP) problem. A case study on the separation of ethanol-water mixture is presented to highlight the potential of the proposed approach in deriving optimal and verifiable extractive separation systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Geometrical correlations as a resource for nonlocal extractable work

In this paper, we aim to describe nonlocal extractable work in terms of geometrical correlations, in an attempt to characterize the latter as a resource for the first. Principally, we are going to show an analytical expression that relates these two quantities for two-qubit Bell-diagonal states. This expression is displayed when the correlations are geometrically defined by using the Schatten 1-norm to measure distances among quantum states in the Hilbert space. Additionally, we are also going to show – outside the family of Bell-diagonal states – the existence of correlated bipartite passive states, implying that nonzero correlations are not a sufficient condition for nonlocal work extraction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Membrane assisted continuous production of solvents with integrated solvent removal using liquid-liquid extraction

The aim was to demonstrate an industrially relevant pilot scale integrated process to produce butanol and other solvents from lignocellulosic sugars produced with AVAP® biomass fractionation technology from southern pine wood. The concentrated sugars were concurrently fermented using genetically engineered Clostridium acetobutylicum to n-butanol, acetone, isopropanol and ethanol in continuous membrane assisted cell recycle fermentation with steady-state solvent productivity exceeding 10 g/L/h. The solvents from the cell free permeate were recovered with extractant of butyl butyrate in a continuous liquid-liquid extraction column and aqueous product (raffinate) along with unused sugars, nutrients, and metabolic intermediates were recycled back to the fermentors. The total solvent yield approached 0.30 g/g sugars.

09 BIOMASS FUELS↗
DOE OSTI2020

Sulfur donating extractants for the separation of trivalent actinides and lanthanides

The effective separation of trivalent actinides and lanthanides is capable of reducing the long term radiation hazard associated with used nuclear fuel. Here, this class of separation exploits the tendency of ligands containing large and polarizable soft donor atoms to preferentially bind to the trivalent actinides instead of the lanthanides. Among the soft donors, nitrogen and sulfur based ligands have received the most attention with sulfur donors generally having greater selectivity for the actinides. Herein, the speciation, mechanism, and selectivity for the extraction of lanthanides and actinides from aqueous media into an organic phase by various sulfur containing extractants is reviewed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Social impacts of earthquakes caused by gas extraction in the Province of Groningen, The Netherlands

Gas extraction from the Groningen gasfield in the northern Netherlands has led to localised earthquakes which are projected to become more severe. The social impacts experienced by local residents include: damage to property; declining house prices; concerns about the chance of dykes breaking; feelings of anxiety and insecurity; health issues; and anger. These social and emotional impacts are exacerbated by the increasing distrust Groningen people have towards the national government and the gas company, NAM, a partnership between Shell and ExxonMobil. The earthquakes have reopened discussions about the distribution of benefits from gas production and the extent to which benefits are retained locally. Mitigation of the impacts is attempted, but the lack of trust decreases the effectiveness of the mitigation measures. The extent of this experience of previously-unforeseen, unanticipated impacts suggests that a new social and environmental impact assessment needs to be undertaken, and a new Social Impact Management Plan (SIMP) and Impacts and Benefits Agreement (IBA) developed, so that the project can regain its legitimacy and social licence to operate. In addition to conventional gas, this paper has wider relevance for unconventional gas developments, for example shale gas extraction by hydraulic fracturing methods (fracking). - Highlights: • Gas production in Groningen has caused over 1000 earthquakes. • The induced seismicity has caused many social impacts. • Impacts include building damage, reduced house prices, fear and health issues. • Mitigation measures attempted to date are inadequate. • Distrust towards the national government and operator hinders mitigation efforts. • Gas production in Groningen has lost its social licence to operate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Production of new activated bio-carbons by chemical activation of residue left after supercritical extraction of hops

Highlights: • An alternative method for bio-waste utilization has been proposed. • Activated bio-carbons were prepared from hops by Na{sub 2}CO{sub 3} activation. • The activated bio-carbons has been used for NO{sub 2}, methylene blue and iodine adsorption. A technology of activated bio-carbons production from the residue left after supercritical extraction of hops is described. The effect of the variant of chemical activation and impregnation ratio on the physicochemical properties as well as sorption capacity towards toxic gas of acidic character (nitrogen dioxide), basic organic dye (aqueous solution of methylene blue - MB) and iodine was investigated. The materials obtained were activated bio-carbons of well-developed surface area ranging between 897 and 1095 m{sup 2}/g, showing clearly acidic character of the surface. The sorption tests results proved that chemical activation of the residue left after supercritical extraction of hops allows obtaining activated bio-carbons with very high sorption capacity towards nitrogen dioxide, reaching to 77.2 and 155.3 mg/g in dry and wet conditions, respectively. The maximum sorption capacity of the adsorbents towards methylene blue was 328.75 mg/g, while towards iodine 1815 mg/g. The equilibrium data for aqueous solution of MB were analyzed by the Langmuir and Freundlich models, whereas the kinetics of the adsorption process was studied using pseudo-first and second-order models. According to the obtained data, the adsorption of MB from aqueous solution is better described by Langmuir model and pseudo-second order kinetic model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Application of sequential extraction and hydrothermal treatment for characterization and enrichment of rare earth elements from coal fly ash

Rare earth elements (REE) play a critical role in the global economy. The concern about the REE supply challenge has stimulated global interest in recovering REE from alternative non-conventional REE sources such as coal fly ash. In this paper, sequential extraction, physical separations and hydrothermal alkaline treatment were explored for characterization and enrichment of REE from coal fly ash. Seven-step sequential extraction of coal fly ash has demonstrated that 86.1% of total REE were associated with the glassy phase of the fly ash, with the remaining REE mainly distributed in the organic and sulfides phase (8.3%), the exchangeable phase (3.7%), and the carbonates phase (1.5%). A process combining physical separations, namely, particle size separation and magnetic separation, and hydrothermal alkaline treatment was proposed for enrichment of REE from coal fly ash. The optimal hydrothermal alkaline treatment condition was determined. It was demonstrated that NaOH concentration, solid-to-liquid ratio, temperature, and reaction duration had significant influence on ash dissolution in NaOH solution. Grinding could also enhance ash dissolution during subsequent hydrothermal alkaline treatment. Furthermore REE were enriched from coal fly ash from 325 mg/kg to 877 mg/kg via the proposed process under optimal hydrothermal alkaline treatment conditions.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2016

Modeling of heat extraction from variably fractured porous media in Enhanced Geothermal Systems

Modeling of heat extraction in Enhanced Geothermal Systems is presented. The study builds on recent studies on the use of directional wells to improve heat transfer between doublet injection and production wells. The current study focuses on the influence of fracture orientation on production temperature in deep low permeability geothermal systems, and the effects of directional drilling and separation distance between boreholes on heat extraction. The modeling results indicate that fracture orientation with respect to the well-pair plane has significant influence on reservoir thermal drawdown. As a result, the vertical well doublet is impacted significantly more than the horizontal well doublet

15 GEOTHERMAL ENERGY↗
DOE OSTI2016

Enhanced light extraction efficiency of GaN-based light-emittng diodes by nitrogen implanted current blocking layer

Highlights: • A nitrogen implanted current-blocking layer was successfully demonstrated. • Light-extraction efficiency and radiant intensity was increased by more than 20%. • Ion implantation was successfully implemented in GaN based light-emitting diodes. - Abstract: GaN-based light emitting diodes (LEDs) with a nitrogen implanted current-blocking layer (CBL) were successfully demonstrated for improving the light extraction efficiency (LEE) and radiant intensity. The LEE and radiant intensity of the LEDs with a shallow implanted CBL with nitrogen was greatly increased by more than 20% compared to that of a conventional LED without the CBL due to an increase in the effective current path, which reduces light absorption at the thick p-pad electrode. Meanwhile, deep implanted CBL with a nitrogen resulted in deterioration of the LEE and radiant intensity because of formation of crystal damage, followed by absorption of the light generated at the multi-quantum well(MQW). These results clearly suggest that ion implantation method, which is widely applied in the fabrication of Si based devices, can be successfully implemented in the fabrication of GaN based LEDs by optimization of implanted depth.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electronic Structure Calculations of the Fundamental Interactions in Solvent Extraction Desalination

Solvent extraction desalination (SED) is a promising membrane-free desalination technology, but new solvents are still needed that can improve the molecular-level water selectivity, while minimizing solvent contamination in the aqueous phase. Improvements in solvent design for SED require a fundamental understanding of the molecular interactions governing solvation behavior. Herein, quantum chemical calculations are used to delineate different fundamental interactions in water-solvent systems involving 38 different solvents, with a particular focus on the role of the electrostatic potential characteristics. Furthermore, these interactions are rigorously analyzed using the independent gradient model based on Hirshfeld partition (IGMH), Symmetry-Adapted Perturbation Theory (SAPT), as well as the energy decomposition analysis based on force field (EDA-FF) to compare against a standard force field model. The solvation free energies and partition coefficients are also calculated to estimate water extraction performance in a bulk solvent system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

An Analysis of Energy Needs and Seawater Extraction Approaches for the Integration of Primary Magnesium Production with Nuclear Power

The cost of primary magnesium production is highly dominated by the energy required to produce the metal. This, along with the current geographical concentration of its production, makes the magnesium price vulnerable as energy-production paradigms begin to rapidly change. In this work, four nuclear-integration pathways for the efficient supply of heat and electricity to magnesium production from a nuclear power plant are considered. A production route using electrified metallothermic reduction is compared to a nuclear-heat-integrated electrolytic pathway. It is shown that the latter can achieve significantly lower primary energy consumption, 261 MJ/kg Mg compared with 416 MJ/kg Mg. The electrolytic pathway can also reduce emissions down to around 2.1 kgCO2/kg Mg, compared to around 34 kgCO2/kg Mg in the Pidgeon process. Beyond energy and emissions, the four pathways considered are also compared to their ability to reduce locational dependence of the production plant and reduce process complexity. This work also highlights future advances in magnesium production with a potential scheme for the efficient extraction of magnesium from seawater with coproduction of desalinated water and the potential of demand-side response from magnesium electrolysis. This is the first work to consider the full integration of primary magnesium production using nuclear cogeneration, and it is hoped the study paves the way for the analysis of economic nuclear integration within metal extraction and manufacturing.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Sorption of rare-earth elements onto a ligand-associated media for pH-dependent extraction and recovery of critical materials

Toward recovering rare-earth elements, we prepared a solid-phase media that binds and elutes metals for extraction and enrichment. We report the synthesis and methodology for a solid-phase media that exhibits pH-dependent binding of aqueous rare-earth elements. The media shows pH-dependent binding of Nd III and retains efficiency over at least six cycles of binding and elution. Mixed solutions of rare-earth elements demonstrated a preference for mid and heavy rare-earth elements based on thermodynamic binding preferences of the ligand, and selectivity for rare-earth elements over iron and aluminum were observed with coal fly ash leachate. In conclusion, we expect this new recovery method to be a significant step towards aqueous-based extraction and enrichment of critically important rare-earth elements.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Separation, speciation, and mechanism of astatine and bismuth extraction from nitric acid into 1-octanol and methyl anthranilate

We report a detailed study of At and Bi extraction from nitric acid media into conventional solvents, namely 1-octanol and methyl anthranilate, has been performed. The analysis includes a mathematical modeling which allows the fitting of experimental data and determination of extraction constants of the two above mentioned elements. Also, this approach helped to estimate a stability constant of a weak AtO(NO3) complex along with thermodynamic constants describing the redox process of At species in the acidic solution and formation of an adduct of Bi in the presence of methyl anthranilate. The results of the fitting have been used to calculate corresponding separation factors of Bi and At as well. Moreover, a computational study has been performed to evaluate At interaction with the above mentioned solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Extraction of valuable chemicals from food waste via computational solvent screening and experiments

About 1.3 billion tons of global food production end up in landfills and composting, leading to significant anthropogenic greenhouse gas (GHG) emissions. Extracting antioxidant and antimicrobial chemicals (flavonoids, phenolic acids, etc.) from food waste is an economically lucrative valorization strategy but is hindered by efficient solvent selection. Here we perform in silico high throughput screening to identify high solubility solvents for key phenolics and reveal more than 100+ higher-performing solvents than the traditional ethanol and methanol. Solubilities of nine shortlisted solvents are measured and found in reasonable agreement with model predictions. Analysis of the Conductor like Screening Model for Real Solvents (COSMO-RS) σ-profiles and Hansen Solubility Parameters reveals that polarity and hydrogen bonding make dimethylformamide (DMF) an excellent single solvent. We showcase the replacement of high-solubility toxic solvents with green mixtures and demonstrate the approach to potato peel waste. As a result, our work provides a blueprint for solvent selection and generates new insights into extraction from food waste.

09 BIOMASS FUELS↗
DOE OSTI2012

Bio-processing of solid wastes and secondary resources for metal extraction - A review

Highlights: Black-Right-Pointing-Pointer Review focuses on bio-extraction of metals from solid wastes of industries and consumer goods. Black-Right-Pointing-Pointer Bio-processing of certain effluents/wastewaters with metals is also included in brief. Black-Right-Pointing-Pointer Quantity/composition of wastes are assessed, and microbes used and leaching conditions included. Black-Right-Pointing-Pointer Bio-recovery using bacteria, fungi and archaea is highlighted for resource recycling. Black-Right-Pointing-Pointer Process methodology/mechanism, R and D direction and scope of large scale use are briefly included. - Abstract: Metal containing wastes/byproducts of various industries, used consumer goods, and municipal waste are potential pollutants, if not treated properly. They may also be important secondary resources if processed in eco-friendly manner for secured supply of contained metals/materials. Bio-extraction of metals from such resources with microbes such as bacteria, fungi and archaea is being increasingly explored to meet the twin objectives of resource recycling and pollution mitigation. This review focuses on the bio-processing of solid wastes/byproducts of metallurgical and manufacturing industries, chemical/petrochemical plants, electroplating and tanning units, besides sewage sludge and fly ash of municipal incinerators, electronic wastes (e-wastes/PCBs), used batteries, etc. An assessment has been made to quantify the wastes generated and its compositions, microbes used, metal leaching efficiency etc. Processing of certain effluents and wastewaters comprising of metals is also included in brief. Future directions of research are highlighted.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗