Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Enthalpy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Testing Various Cement Formulations under Temperature Cycles and Drying Shrinkage for Low-Temperature Geothermal Wells

Low-enthalpy geothermal wells are considered a sustainable energy source, particularly for district heating in the Netherlands. The cement sheath in these wells experiences thermal cycles. The stability of cement recipes under such conditions is not well understood. In this work, thermal cycling experiments for intermediate- and low-temperature geothermal well cements have been conducted. The samples were cured either under ambient conditions or under realistic pressure and temperature for 7 days. The samples did not show any signs of failure after performing 10 cycles of thermal treatment between 100 °C and 18 °C. We also tested cement formulations under drying conditions. Drying shrinkage is caused by a reduction in the water content of cement, which leads to capillary forces that can damage cement. Such circumstances lead to tensile stresses causing radial cracks. Most samples exhibited cracks under low humidity conditions (drying). Fiber reinforcement, especially using short PP fibers, improved the cement’s resilience to temperature and humidity changes. Such additives can improve the longevity of cement sheaths in geothermal wells.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Influence of Carboxymethyl Cellulose as a Thickening Agent for Glauber’s Salt-Based Low Temperature PCM

This work is focused on a novel, promising low temperature phase change material (PCM), based on the eutectic Glauber’s salt composition. To allow phase transition within the refrigeration range of temperatures of +5 °C to +12 °C, combined with a high repeatability of melting–freezing processes, and minimized subcooling, the application of three variants of sodium carboxymethyl cellulose (Na-CMC) with distinct molecular weights (700,000, 250,000, and 90,000) is considered. The primary objective is to optimize the stabilization of this eutectic PCM formulation, while maintaining the desired enthalpy level. Preparation methods are refined to ensure repeatability in mixing components, thereby optimizing performance and stability. Additionally, the influence of Na-CMC molecular weight on stabilization is examined through differential scanning calorimetry (DSC), T-history, and rheology tests. The PCM formulation of interest builds upon prior research in which borax, ammonium chloride, and potassium chloride were used as additives to sodium sulfate decahydrate (Glauber’s salt), prioritizing environmentally responsible materials. The results reveal that CMC with molecular weights of 250 kg/mol and 90 kg/mol effectively stabilize the PCM without phase separation issues, slowing crystallization kinetics. Conversely, CMC of 700 kg/mol proved ineffective due to the disruption of gel formation at its low gel point, hindering higher concentrations. Calculations of ionic concentration indicate higher Na ion content in PCM stabilized with 90 kg/mol CMC, suggesting increased ionic interactions and gel strength. A tradeoff is discovered between the faster crystallization in lower molecular weight CMC and the higher concentration required, which increases the amount of inert material that does not participate in the phase transition. After thermal cycling, the best formulation had a latent heat of 130 J/g with no supercooling, demonstrating excellent performance. This work advances PCM’s reliability as a thermal energy storage solution for diverse applications and highlights the complex relationship between Na-CMC molecular weight and PCM stabilization.

25 ENERGY STORAGE↗
DOE OSTI2025

Application of Machine Learning and Data Augmentation Algorithms in the Discovery of Metal Hydrides for Hydrogen Storage

The development of efficient and sustainable hydrogen storage materials is a key challenge for realizing hydrogen as a clean and flexible energy carrier. Among various options, metal hydrides offer high volumetric storage density and operational safety, yet their application is limited by thermodynamic, kinetic, and compositional constraints. In this work, we investigate the potential of machine learning (ML) to predict key thermodynamic properties—equilibrium plateau pressure, enthalpy, and entropy of hydride formation—based solely on alloy composition using Magpie-generated descriptors. We significantly expand an existing experimental dataset from ~400 to 806 entries and assess the impact of dataset size and data augmentation, using the PADRE algorithm, on model performance. Models including Support Vector Machines and Gradient Boosted Random Forests were trained and optimized via grid search and cross-validation. Results show a marked improvement in predictive accuracy with increased dataset size, while data augmentation benefits are limited to smaller datasets and do not improve accuracy in underrepresented pressure regimes. Furthermore, clustering and cross-validation analyses highlight the limited generalizability of models across different material classes, though high accuracy is achieved when training and testing within a single hydride family (e.g., AB2). The study demonstrates the viability and limitations of ML for accelerating hydride discovery, emphasizing the importance of dataset diversity and representation for robust property prediction.

augmentation↗
DOE OSTI2022

Effects of Charged Solute-Solvent Interaction on Reservoir Temperature during Subsurface CO2 Injection

A short-term side-effect of CO2 injection is a developing low-pH front that forms ahead of the bulk water injectant, due to differences in solute diffusivity. Observations of downhole well temperature show a reduction in aqueous-phase temperature with the arrival of a low-pH front, followed by a gradual rise in temperature upon the arrival of a high concentration of bicarbonate ion. In this work, we model aqueous-phase transient heat advection and diffusion, with the volumetric energy generation rate computed from solute-solvent interaction using the Helgeson–Kirkham–Flowers (HKF) model, which is based on the Born Solvation model, for computing specific molar heat capacity and the enthalpy of charged electrolytes. A computed injectant water temperature profile is shown to agree with the actual bottom hole sampled temperature acquired from sensors. The modeling of aqueous-phase temperature during subsurface injection simulation is important for the accurate modeling of mineral dissolution and precipitation because forward dissolution rates are governed by a temperature-dependent Arrhenius model.

58 GEOSCIENCES↗
DOE OSTI2023

Eu(III) and Cm(III) Complexation by the Aminocarboxylates NTA, EDTA, and EGTA Studied with NMR, TRLFS, and ITC—An Improved Approach to More Robust Thermodynamics

The complex formation of Eu(III) and Cm(III) was studied via tetradentate, hexadentate, and octadentate coordinating ligands of the aminopolycarboxylate family, viz., nitrilotriacetate (NTA 3- ), ethylenediaminetetraacetate (EDTA 4- ), and ethylene glycol-bis(2-aminoethyl ether)-N,N,N',N'-tetraacetate (EGTA 4- ), respectively. Based on the complexones’ pK a values obtained from 1 H nuclear magnetic resonance (NMR) spectroscopic pH titration, complex formation constants were determined by means of the parallel-factor-analysis-assisted evaluation of Eu(III) and Cm(III) time-resolved laser-induced fluorescence spectroscopy (TRLFS). This was complemented by isothermal titration calorimetry (ITC), providing the enthalpy and entropy of the complex formation. This allowed us to obtain genuine species along with their molecular structures and corresponding reliable thermodynamic data. The three investigated complexones formed 1:1 complexes with both Eu(III) and Cm(III). Besides the established Eu(III)–NTA 1:1 and 1:2 complexes, we observed, for the first time, the existence of a Eu(III)–NTA 2:2 complex of millimolar metal and ligand concentrations. Demonstrated for thermodynamic studies on Eu(III) and Cm(III) interaction with complexones, the utilized approach is commonly applicable to many other metal–ligand systems, even to high-affinity ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Redox Chemistry of the Subphases of α-CsPbI2Br and β-CsPbI2Br: Theory Reveals New Potential for Photostability

The logic in the design of a halide-mixed APb(I 1-x Br x ) 3 perovskite is quite straightforward: to combine the superior photovoltaic qualities of iodine-based perovskites with the increased stability of bromine-based perovskites. However, even small amounts of Br doped into the iodine-based materials leads to some instability. In the present report, using first-principles computations, we analyzed a wide variety of α-CsPbI 2 Br and β-CsPbI 2 Br phases, compared their mixing enthalpies, explored their oxidative properties, and calculated their hole-coupled and hole-free charged Frenkel defect (CFD) formations by considering all possible channels of oxidation. Nanoinclusions of bromine-rich phases in α-CsPbI 2 Br were shown to destabilize the material by inducing lattice strain, making it more susceptible to oxidation. The uniformly mixed phase of α-CsPbI 2 Br was shown to be highly susceptible towards a phase transformation into β-CsPbI 2 Br when halide interstitial or halide vacancy defects were introduced into the lattice. The rotation of PbI 4 Br 2 octahedra in α-CsPbI2Br allows it either to transform into a highly unstable apical β-CsPbI 2 Br, which may phase-segregate and is susceptible to CFD, or to phase-transform into equatorial β-CsPbI 2 Br, which is resilient against the deleterious effects of hole oxidation (energies of oxidation >0 eV) and demixing (energy of mixing <0 eV). Thus, the selective preparation of equatorial β-CsPbI 2 Br offers an opportunity to obtain a mixed perovskite material with enhanced photostability and an intermediate bandgap between its constituent perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermodynamics of the Nonrelativistic Free-Electron Fermi Gas in One, Two, and Three Dimensions from the Degenerate to the Nondegenerate Temperature Regime

The thermodynamic properties of a nonrelativistic free-electron Fermi gas is of fundamental interest in condensed matter physics. Properties previously studied in three-dimensions (3D) in the lowand high-temperature limits include the internal energy, heat capacity, zero-field magnetic spin susceptibility, and pressure. Here we report solutions for the temperature dependence spanning these two temperature regimes of the chemical potential, internal energy, magnetic susceptibility, and the heat capacity at constant volume in 1D, 2D, and 3D. Also calculated are the pressure, enthalpy, heat capacity at constant pressure, isothermal compressibility, and thermal expansion coefficient versus temperature in 2D and 3D. Of primary interest here are the detailed dimension-dependent crossovers of these properties between the degenerate and nondegenerate temperature regime, which are graphically illustrated for each of the above properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

C/2014 UN 271 (Bernardinelli-Bernstein): The Nearly Spherical Cow of Comets

Abstract Comet C/2014 UN 271 (Bernardinelli-Bernstein), incoming from the Oort cloud, is remarkable in having the brightest (and presumably largest) nucleus of any well-measured comet and having been discovered at the heliocentric distance r h ≈ 29 au, farther than any Oort cloud comet. In this work, we describe the discovery process and observations and the properties that can be inferred from images recorded until the first reports of activity in 2021 June. The orbit has i = 95°, with a perihelion of 10.97 au to be reached in 2031 and a previous aphelion at 40,400 ± 260 au. Backward integration of the orbit under a standard Galactic tidal model and known stellar encounters suggests a perihelion of q ≈ 18 au on its previous perihelion passage 3.5 Myr ago; hence, the current data could be the first ever obtained of a comet that has not been inside Uranus’s orbit in 4 Gyr. The photometric data show an unresolved nucleus with absolute magnitude H r = 8.0, colors that are typical of comet nuclei or Damocloids, and no secular trend as it traversed the range 34–23 au. For the r -band geometric albedo p r , this implies a diameter of 150 ( p r / 0.04 ) − 0.5 km. There is strong evidence of brightness fluctuations at the ±0.2 mag level, but no rotation period can be discerned. A coma, nominally consistent with a “stationary” 1/ ρ surface brightness distribution, grew in scattering cross section at an exponential rate from A f ρ ≈ 1 to ≈150 m as the comet approached from 28 to 20 au. The activity rate is consistent with a very simple model of sublimation of a surface species in radiative equilibrium with the Sun. The inferred enthalpy of sublimation matches those of CO 2 and NH 3 . More volatile species, such as N 2 , CH 4 , and CO, must be far less abundant on the sublimating surfaces.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Measuring Very Low Radiation Doses in PTFE for Nuclear Forensic Enrichment Reconstruction

Every country that has made nuclear weapons has used uranium enrichment. Despite the centrality of this technology to international security, there is still no reliable physical marker of past enrichment that can be used to perform forensic verification of historically produced weapons. We show that the extremely low radioactivity from uranium alpha emissions during enrichment leaves detectable and irreversible calorimetric signatures in the common enrichment gasket material PTFE, allowing for historical reconstruction of past enrichment activities at a sensitivity better than one weapon's quantity of highly enriched uranium. Fast scanning calorimetry also enables the measurement of recrystallization enthalpies of sequentially microtomed slices, confirming the magnitude and the type of radiation exposure while also providing a detection of tampering and a method for analyzing field samples useful for treaty verification. This work opens the door for common items to be turned into precise dosimeters to detect the past presence of radioactivity, nuclear materials, and related activities with high confidence.

Connick, Rachel↗
DOE OSTI2024

Desorption lifetimes and activation energies influencing gas–surface interactions and multiphase chemical kinetics

Abstract. Adsorption and desorption of gases on liquid or solid substrates are involved in multiphase processes and heterogeneous chemical reactions. The desorption energy (Edes0), which depends on the intermolecular forces between adsorbate and substrate, determines the residence time of chemical species at interfaces. We show how Edes0 and temperature influence the net uptake or release of gas species, the rates of surface–bulk exchange and surface or bulk reactions, and the equilibration timescales of gas–particle partitioning. Using literature data, we derive a parameterization to estimate Edes0 for a wide range of chemical species based on the molecular mass, polarizability, and oxygen-to-carbon ratio of the desorbing species independent of substrate-specific properties, which is possible because of the dominant role of the desorbing species' properties. Correlations between Edes0 and the enthalpies of vaporization and solvation are rooted in molecular interactions. The relation between Edes0 and desorption kinetics reflects the key role of interfacial exchange in multiphase processes. For small molecules and semi-volatile organics (VOC, IVOC, SVOC), Edes0 values around 10–100 kJ mol−1 correspond to desorption lifetimes around nanoseconds to days at room temperature. Even higher values up to years are obtained at low temperatures and for low volatile organic compounds (LVOC, ELVOC/ULVOC) relevant for secondary organic aerosols (SOA). Implications are discussed for SOA formation, gas–particle partitioning, organic phase changes, and indoor surface chemistry. We expect these insights to advance the mechanistic and kinetic understanding of multiphase processes in atmospheric and environmental physical chemistry, aerosol science, materials science, and chemical engineering.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Thermochemical Data for Furan-based Monomer Candidates for Frontal Ring-Opening Metathesis Polymerization (FROMP)

This dataset includes 471 furan-based monomer candidates for frontal ring-opening metathesis polymerization (FROMP) and relevant thermochemistry as calculated with density functional theory (DFT). The monomer candidates were combinatorically enumerated using Diels-Alder reactions of furan derivatives as dienes and four types of dienophiles (alkenes, alkynes, allenes, and benzynes). Common substituents were enumerated for the dienophile classes, and methyl substitution on the diene was explored. We used the SMILES arbitrary target specification (SMARTS) language to produce monomers and ring-opened structures from diene and dienophile precursor SMILES, and we studied the ring-opening reaction using a homodesmotic equation with ethene. RDKit conformers were initially generated from SMILES, then optimized with GFN2-xTB. The two conformers lowest in energy were then optimized with DFT using the wb97x-D3 functional, def2-TZVP basis set, and def2/J auxiliary basis set. Gibbs free energy corrections were obtained through frequency calculations. Structures with imaginary frequencies below -50 cm^{-1} were excluded from this work, and smaller imaginary modes were flipped to be positive for free energy calculations. Modes below 50 cm^{-1} were treated with the modified rigid rotor approximation, and all thermochemical values were calculated at T=200C. The CSV file contains the monomer SMILES, the free energy of reaction for Diels-Alder addition (G_DA_200), and the enthalpy of the ring-opening reaction (H_RO_200). All energies are given in kcal/mol. An interactive HTML is also included to visualize the monomers in this dataset.

Chua, Lauren↗
NASA NTRS1962

Thermodynamic and Transport Property Correlation Formulas for Equilibrium Air from 1,000 Degrees Kelvin to 15,000 Degrees Kelvin

The thermodynamic properties, density and temperature, as well as transport property parameters involving viscosity, Prandtl number (including diffusion effects), and gaseous radiation absorption coefficients have been correlated as a function of enthalpy at four pressure levels (10 (sup -1), 10 (sup 0), 10, and 10 (sup 2) atmospheres). The correlation formulas are written in a generalized form for which coefficients for a particular property and pressure level are tabulated. The correlation formulas are useful in digital computer programs for non-adiabatic viscous flow problems.

AIR↗
NASA NTRS1964

Experimental Data on Stagnation-Point Gas Injection Cooling on a Hemisphere-Cone in a Hypersonic Arc Tunnel

Exploratory tests were made to determine the reduction of heat transfer resulting from ejection of gases at the stagnation point on a hemisphere-cone at a nominal Mach number of about 9 and at stagnation enthalpies up to 1600 BTU per pound. Helium, nitrogen, and argon gases were used as coolants. The ratio of mass flow of coolant to the mass flow of air swept out by the model projected area was less than 0.20 in all cases. The experimental heat-transfer data were normalized by the calculated stagnation-point values based on test conditions in the tunnel and are presented as a function of the surface distance from the stagnation point. The variation of shock standoff distances with mass flow and volumetric flow of the gaseous ejectants is presented along with photographs of the luminous flow field of the model during tests.

STAGNATION FLOW↗
NASA NTRS1965

Evaluation of materials in entry heating simulation

The effects of several environmental parameters on the behavior of ablation materials have been examined. Practically all the entry heating parameters such as enthalpy, pressure, heating rate, aerodynamic shear, and so forth, affect material performance. However, the significance of the effects depends to a large extent upon the type of material. Inasmuch as it is rarely possible to simulate several environment effects simultaneously, the primary inputs must be determined and the test simulation must account for the effects of these inputs. The particular materials of concern must be characterized by test and analysis to determine which of the many environmental inputs are the most significant.

Simulation↗