Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Embedding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Efficient and Robust Dynamic Simulation of Power Systems With Holomorphic Embedding

Dynamic simulation is vitally important in power system analysis, but traditional approaches based on numerical integration over small time steps are time-consuming. Also, the Newton-Raphson method suffers from difficulty in convergence when solving nonlinear algebraic equations. In this paper, we propose a novel dynamic simulation approach based on holomorphic embedding. By obtaining a high-order approximation of system dynamics, it achieves a much larger time step and thus enhances the computational efficiency significantly. In addition, the new approach avoids non-convergence issues in solving algebraic equations, which improves robustness. The approach includes flexible modeling of synchronous generators and controllers, and we propose a method for modeling generator coordinate transformations. The approach is tested on the IEEE 39-bus, 10-generator system and a Polish 2383-bus, 327-generator system. The results demonstrate promising computational efficiency and satisfactory numerical robustness for the analysis of large-scale power systems.

42 ENGINEERING↗

Electronic and Vibrational Dynamics of Hollow Au Nanocages Embedded in Cu 2 O Shells

Abstract We have synthesized hollow Au nanocages embedded within thick porous shells of cuprous oxide (Cu 2 O). The shell causes a significant redshift of the localized surface plasmon resonance of Au into the near‐ IR . Electron–phonon coupling in the Au nanocage is 3–6 times faster in the core–shell structure due to the higher thermal conductivity of Cu 2 O compared to water. Coherent phonon oscillations within the Au lattice are characterized by a breathing mode of the entire structure for both bare and core–shell nanocages, an assignment made through the use of structural mechanics simulations. The experimental frequencies are obtained through simulations by selectively applying a force to the shell of the core–shell structure. We interpret this as rapid thermal expansion of the gold leading to a mechanical force that acts on the shell.

Szymanski, Paul↗

The balanced-force volume tracking algorithm and global embedded interface formulation for droplet dynamics with mass transfer

Understanding the complex interaction of droplet dynamics with mass transfer and chemical reactions is of fundamental importance in liquid-liquid extraction. High-fidelity numerical simulation of droplet dynamics with interfacial mass transfer is particularly challenging because the position of the interface between the fluids and the interface physics need to be predicted as part of the solution of the flow equations. In addition, the discontinuity in fluid density, viscosity and species concentration at the interface present additional numerical challenges. In this work, we extend our balanced-force volume-tracking algorithm for modeling surface tension force (Francois et al., 2006) and we propose a global embedded interface formulation to model the interfacial conditions of an interface in thermodynamic equilibrium. To validate our formulation, we perform simulations of pure diffusion problems in one- and two-dimensions. Then we present two and three-dimensional simulations of a single droplet dynamics rising by buoyancy with mass transfer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

XRD studies of cement embedding matrices containing complexing reagents from decontamination practices

The study of embedding matrix of radioactive waste is an important issue concerning the need to assure the radiological safety requirements for final disposal. The conditioning of the radioactive wastes by cementation process involves also a structural investigation by X-ray diffraction (XRD) of the samples prepared with cement and complexing agents at different concentration. This paper gives useful information about the influence of complexing agents related to damages produced in concrete microstructures. The experimental data obtained on samples kept in real repository environment for a period up to 15 years, offer structural information regarding the interaction between the different decontamination agents with the major components of the matrix. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Observation of bound states in the continuum embedded in symmetry bandgaps

In the past decade, symmetry-protected bound states in the continuum (BICs) have proven to be an important design principle for creating and enhancing devices reliant upon states with high-quality (Q) factors, such as sensors, lasers, and those for harmonic generation. However, as we show, current implementations of symmetry-protected BICs in photonic crystal slabs can only be found at the center of the Brillouin zone and below the Bragg diffraction limit, which fundamentally restricts their use to single-frequency applications. By microprinting a three-dimensional (3D) photonic crystal structure using two-photon polymerization, we demonstrate that this limitation can be overcome by altering the radiative environment surrounding the slab to be a 3D photonic crystal. This allows for the protection of a line of BICs by embedding it in a symmetry bandgap of the crystal. This concept substantially expands the design freedom available for developing next-generation devices with high-Q states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal Structure of a Nickel(II) Complex with the Macrocyclic Azadibenzo-14-crown-4 Ether Ligand Containing the Embedded Di(α-pyridyl)bispidone Moiety

The crystal structure of the nickel(II) complex with substituted azadibenzo-14-crown-4 ether containing the embedded di(α-pyridyl)bispidone moiety having the formula [L(H{sub 2}O)Ni(NO{sub 3}) Ni(H{sub 2}O)L](ClO{sub 4}){sub 3} · 0.7EtOH was studied by X-ray diffraction (T = 150(2) K, R = 0.0628). In the complex cation two five-coordinate nickel complexes are bridged by the nitrate anion to form a dimer. The distorted octahedral environment of Ni atoms is formed by four nitrogen atoms of the molecule L and the oxygen atoms of the water molecule and the NO{sub 3}{sup -} anion. In the nickel complex, like in the cobalt and copper complexes studied previously, the bispidine moiety of the molecule L adopts a chair-chair conformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoluminescence properties of cadmium-selenide quantum dots embedded in a liquid-crystal polymer matrix

The photoluminescence properties of cadmium-selenide (CdSe) quantum dots with an average size of {approx}3 nm, embedded in a liquid-crystal polymer matrix are studied. It was found that an increase in the quantum-dot concentration results in modification of the intrinsic (exciton) photoluminescence spectrum in the range 500-600 nm and a nonmonotonic change in its intensity. Time-resolved measurements show the biexponential decay of the photoluminescence intensity with various ratios of fast and slow components depending on the quantum-dot concentration. In this case, the characteristic lifetimes of exciton photoluminescence are 5-10 and 35-50 ns for the fast and slow components, respectively, which is much shorter than the times for colloidal CdSe quantum dots of the same size. The observed features of the photoluminescence spectra and kinetics are explained by the effects of light reabsorption, energy transfer from quantum dots to the liquid-crystal polymer matrix, and the effect of the electronic states at the CdSe/(liquid crystal) interface.

36 MATERIALS SCIENCE↗

Simulation of ultraviolet- and soft X-ray-pulse generation as a result of cooperative recombination of excitons in diamond nanocrystals embedded in a polymer film

Using numerical simulation, it is shown that the recombination of free excitons photoexcited in diamond nanocrystals embedded in a polymer film can occur in the cooperative mode. It is found that this mode can be implemented despite the fact that diamond is an 'indirect' semiconductor. It is shown that the power of the generated radiation at the pulse peak during the cooperative recombination of free excitons can exceed that of the incoherent spontaneous emission of the same initial number of free excitons by more than an order of magnitude. Finally, it is shown that the process under consideration can be used to generate picosecond pulses of ultraviolet and soft X-ray electromagnetic field at a wavelength of 235 nm.

36 MATERIALS SCIENCE↗

On the size and temperature dependence of the energy gap in cadmium-selenide quantum dots embedded in fluorophosphate glasses

The temperature and size dependences of the energy gap in CdSe quantum dots with diameters of 2.4, 4.0, and 5.2 nm embedded in fluorophosphate glasses are investigated. It is shown that the temperature coefficient of the band gap dE{sub g}/dT in the quantum dots differs from the bulk value and depends strictly on the dot size. It is found that, furthermore, the energy of each transition in these quantum dots is characterized by an individual temperature coefficient dE/dT.

36 MATERIALS SCIENCE↗

Plasmon Resonance Induced Photoconductivity in the Yttria Stabilized Zirconia Films with Embedded Au Nanoclusters

We report on the investigation of the photoconductivity (PC) in the yttria stabilized zirconia (YSZ) films with embedded Au nanoclusters (NCs). A peak in the PC spectrum corresponding to the plasmon optical absorption resonance in the Au NCs was observed. The temperature dependence of PC near 300 K obeyed Mott law. In this case, the PC was attributed to the heating of the YSZ matrix due to the plasmon optical absorption in the Au NCs (bolometric effect). Near 77 K, the PC did not depend on temperature and was attributed to plasmon-assisted electron transport between the NCs via the vacancy α-band in YSZ.

36 MATERIALS SCIENCE↗

Sparse Hardware Embedding of Spiking Neuron Systems for Community Detection

We study the applicability of spiking neural networks and neuromorphic hardware for solving general optimization problems without the use of adaptive training or learning algorithms. We leverage the dynamics of Hopfield networks and spin-glass systems to construct a fully connected spiking neural system to generate synchronous spike responses indicative of the underlying community structure in an undirected, unweighted graph. Mapping this fully connected system to current generation neuromorphic hardware is done by embedding sparse tree graphs to generate only the leading-order spiking dynamics. Here, we demonstrate that for a chosen set of benchmark graphs, the spike responses generated on a current generation neuromorphic processor can improve the stability of graph partitions and non-overlapping communities can be identified even with the loss of higher-order spiking behavior if the graphs are sufficiently dense. For sparse graphs, the loss of higher-order spiking behavior improves the stability of certain graph partitions but does not retrieve the known community memberships.

97 MATHEMATICS AND COMPUTING↗

Automating Embedded Analysis Capabilities and Managing Software Complexity in Multiphysics Simulation, Part II: Application to Partial Differential Equations

A template-based generic programming approach was presented in Part I of this series of papers [Sci. Program. 20 (2012), 197–219] that separates the development effort of programming a physical model from that of computing additional quantities, such as derivatives, needed for embedded analysis algorithms. In this paper, we describe the implementation details for using the template-based generic programming approach for simulation and analysis of partial differential equations (PDEs). We detail several of the hurdles that we have encountered, and some of the software infrastructure developed to overcome them. We end with a demonstration where we present shape optimization and uncertainty quantification results for a 3D PDE application.

Pawlowski, Roger P.↗

Modified Embedded Atom Method

Interatomic force and energy calculation subroutine to be used with the molecular dynamics simulation code LAMMPS (Ref a.). The code evaluated the total energy and atomic forces (energy gradient) according to a cubic spline-based variant (Ref b.) of the Modified Embedded Atom Method (MEAM) with a additional Stillinger-Weber (SW) contribution.

Rudd, R.E.↗

Constructing Hardware in a Scale Embedded Language

Chisel is a new open-source hardware construction language developed at UC Berkeley that supports advanced hardware design using highly parameterized generators and layered domain-specific hardware languages. Chisel is embedded in the Scala programming language, which raises the level of hardware design abstraction by providing concepts including object orientation, functional programming, parameterized types, and type inference. From the same source, Chisel can generate a high-speed C++-based cycle-accurate software simulator, or low-level Verilog designed to pass on to standard ASIC or FPGA tools for synthesis and place and route.

Bachan, John↗

The Suite for Embedded Applications and Kernels

Many applications of high performance embedded computing are limited by performance or power bottlenecks. We have designed SEAK, a new benchmark suite, (a) to capture these bottlenecks in a way that encourages creative solutions to these bottlenecks? and (b) to facilitate rigorous, objective, end-user evaluation for their solutions. To avoid biasing solutions toward existing algorithms, SEAK benchmarks use a mission-centric (abstracted from a particular algorithm) and goal-oriented (functional) specification. To encourage solutions that are any combination of software or hardware, we use an end-user blackbox evaluation that can capture tradeoffs between performance, power, accuracy, size, and weight. The tradeoffs are especially informative for procurement decisions. We call our benchmarks future proof because each mission-centric interface and evaluation remains useful despite shifting algorithmic preferences. It is challenging to create both concise and precise goal-oriented specifications for mission-centric problems. This paper describes the SEAK benchmark suite and presents an evaluation of sample solutions that highlights power and performance tradeoffs.

Source record↗

Sensor Authentication: Embedded Processor Code

Described is the c code running on the embedded Microchip 32bit PIC32MX575F256H located on the INL developed noise analysis circuit board. The code performs the following functions: -Controls the noise analysis circuit board preamplifier voltage gains of 1, 10, 100, 000 -Initializes the analog to digital conversion hardware, input channel selection, Fast Fourier Transform (FFT) function, USB communications interface, and internal memory allocations -Initiates high resolution 4096 point 200 kHz data acquisition -Computes complex 2048 point FFT and FFT magnitude. -Services Host command set -Transfers raw data to Host -Transfers FFT result to host -Communication error checking

Svoboda, John↗

FTL: Transfer Learning Nonlinear Plasma Dynamic Transitions in Low Dimensional Embeddings (FTL) v1.0

Fusion Transfer Learning (FTL) model provides a new paradigm to study high-dimensional dynamical behaviors, such as those in fusion plasma systems. The knowledge transfer process leverages a pre-trained neural encoder-decoder network, initially trained on linear simulations, to effectively capture nonlinear dynamics. The low-dimensional embeddings extract the coherent structures of interest, while preserving the inherent dynamics of the complex system. Experimental results highlight FTL's capacity to capture transitional behaviors and dynamical features in plasma dynamics -- a task often challenging for conventional methods. The model developed in this study is generalizable and can be extended broadly through transfer learning to address various magnetohydrodynamics (MHD) modes.

Bai, Zhe↗