Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELONGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Evolution of fibrils with special reference to flare activity

A series of H alpha filtergrams are presented and used to examine the preflare evolution of H alpha structures along with the development of H alpha chromospheric flares. Three stages are found in the development of preflare neutral line filaments: (1) formation of a filament as a result of reconnection, (2) increase of the shear of the filament, and (3) reconnection of the fine components of the filament to form an elongated component immediately prior to the flare. Two particular examples of solar flares are examined: (1) the flare of July 5, 1974 which began with the activation of the elongated component of the filament after reconnection of the fine components, and (2) the flare of September 10, 1974 which occurred at the region where fibrils connect the sunspots in distorted form.

Tanaka, K.↗

Fractography of the high temperature hydrogen attack of a medium carbon steel

Results are reported for an experimental study of the microscopic fracture processes associated with hydrogen attack of a commercially produced plain carbon steel in a well-controlled high-temperature hydrogen environment of high purity. In the experiments, sheet samples were exposed to laboratory-grade hydrogen at a pressure of 3.5 MN/sq m and a temperature of 575 C. The fractography of gas-filled fissures and failed tension specimens is analyzed in an effort to identify any predominant microstructural defect associated with fissure formation, the prevalent modes of fracture, and the contribution of gas-filled fissures to the overall failure process. It is found that the tensile properties of the examined steel were significantly degraded after as few as 136 hr of exposure to a high-purity hydrogen atmosphere at 575 C; that the yield strength, ultimate strength, and elongation at fracture were all reduced progressively with increasing exposure time; and that the yield and ultimate strengths were reduced more than 40% after 408 hr while elongation was reduced to less than 2%.

Nelson, H. G.↗

Viking Observations of Phobos and Deimos: Preliminary Results

The improved resolution of the Viking images has led to the discovery of a number of unusual surface features on Phobos. The features include elongated rill-like depressions associated with the crater Stickney, chains and clusters of irregular elongated craters, and linear striations or grooves. Crater counts are also considered. A total of 27 craters ranging in size from 0.3 to 1.4 km are visible on the best Deimos frame available. Craters ranging from 50 m to 4.9 km in diameter can be observed on the best of the Phobos images.

Veverka, J.↗

Development and Evaluation of Elastomeric Materials for Geothermal Applications

A material was formulated having about 250-350 psi tensile strength and 30-80 percent elongation at 260 C for at least 24 hours in simulated brine. The relationship between these laboratory test results and sealing performance in actual or simulated test conditions is not entirely clear; however, it is believed that no conventional formation or casing packer design is likely to perform well using these materials. The synthetic effort focused on high temperature block copolymers and development of curable polystyrene. Procedures were worked out for synthesizing these new materials. Initial results with heat-cured unfilled polystyrene 'gum' at 260 C indicate a tensile strength of about 50 psi. Cast films of the first sample of polyphenyl quinoxaline-polystyrene block copolymer, which has 'graft-block' structure consisting of a polystyrene chain with pendant polyphenyl quinoxaline groups, show elastomeric behavior in the required temperature range. Its tensile strength and elongation at 260 C were 220-350 psi and 18-36 percent, respectively. All of these materials also showed satisfactory hydrolytic stability.

Mueller, W. A.↗

Spin-related magnetism of interstellar grains

The magnetic dipole moments and internal magnetic fields due to the spin of electrically charged elongated nonmagnetic interstellar grains in kinetic equilibrium with their surroundings are computed for the grain-size range from 0.01 to 1.0 micron. It is shown that the induced magnetic moments and internal magnetic fields of charged spinning nonmagnetic grains of arbitrary composition and prolate spheroidal shape can be appreciable, possibly even exceeding 0.01 emu/cu cm for 0.01-micron grains. The results indicate that virtually all grains smaller than 0.1 micron in mean diameter, and all elongated grains smaller than about 1 micron in length, are immersed in local magnetic fields due to spin that are much larger than the ambient galactic field. Some implications of this effect are discussed in relation to the polarization of starlight by aligned dust grains and the primordial remanent magnetization found in primitive carbonaceous chondrites.

Srnka, L. J.↗

Frost streaks in the south polar cap of Mars

Viking Orbiter images of the annual south polar cap on Mars exhibit elongated bright features that are associated with craters and resemble wind streaks observed elsewhere on Mars. The study focuses on the well-documented frost streaks. The discussion covers the morphology of frost streaks, occurrence, seasonal behavior, thickness of frost in streak deposits, wind patterns inferred from frost streaks and other eolian features in the south polar region, formation of frost streaks, and other locales of preferential frost accumulation. The form and seasonal behavior of the bright elongated albedo markings which extend from the rims of many craters in the south polar cap suggest that they are accumulations of CO2 frost in the lee of craters. The frost streaks appear in the fall, increasing in length but not changing in direction during fall and winter. The frost streaks indicate a prograde circulation pattern of near-surface winds around the pole. Other details are also presented.

Thomas, P.↗

The stability of an SO2 atmosphere on Io

Active volcanism observed on Io could provide a continuous source of gases from Io's interior. Only a small fraction of what is coming out of Io's volcanoes is escaping; the bulk of it is being recycled. There must be an atmospheric reservoir which maintains the gases until they have had a chance to recycle. Such an atmosphere must be protected from Jupiter's corotating plasma in order to be stable. Only the dayside atmosphere is subject to escape, while the cold nightside and poles would serve as a sink for atmospheric gases. However, the scavenging of atmospheric gases is maximum at the eastern elongation and minimum at the western elongation. A stable SO2 atmosphere on Io shows promise if the volcanic activity is continuous. If the volcanoes stop erupting, the atmosphere will be depleted.

Kumar, S.↗

Transverse and longitudinal tensile properties at 760 C of several oxide dispersion strengthened nickel-base alloys

The transverse and longitudinal tensile properties of the oxide dispersion strengthened nickel-base alloys were determined at 760 C. The alloys with small amounts of gamma prime have strength levels suitable for turbine vane applications, while other highly alloyed, gamma prime strengthened superalloys have strengths typical of turbine blade materials. These alloys were produced by mechanical alloying and extrusion and the turbine blade alloys were also directionally recrystallized. Resultant grain aspect ratios varied from 1:1 to over 20:1. Longitudinal tensile strengths ranged from 285 to 1175 MPa, while longitudinal elongations were in excess of 4 percent for all alloys. Transverse tensile strengths were comparable to longitudinal strengths, but transverse ductility levels were generally less than 2 percent elongation. Tensile and yield strengths increased with increasing strain rate over the range 0.001 to 0.05 per second. Ductility in both orientations was not strain rate sensitive but could be related to grain size and grain aspect ratio.

Anglin, A. E., Jr.↗

Zodiacal light surface brightness measurements by Atmosphere Explorer-C

The visible airglow photometer on the Atmosphere Explorer-C satellite has been used to map the zodiacal light surface brightness at the wavelengths monitored by the instrument: 3371, 4278, 5200, 5577, 6300, and 7319 A. The study constitutes a survey over this wavelength range, covering most of the celestial sphere from altitudes above the atmospheric emissions and free from atmospheric scattering and attenuation. The intensity variations reveal enhancements near elongations of 130 deg and possibly near 60 deg at all wavelengths. The intensity of the zodiacal light near the ecliptic pole is found to be about 30 S10 units. The color ratio with respect to the sun is found to be redder than the sun (0.7) at all elongations.

Torr, M. R.↗

Characterization of an oxide dispersion strengthened superalloy, MA-6000E, for turbine blade applications

Alloy MA 6000E was developed by the mechanical alloying process for turbine blade applications. The nominal composition of the experimental alloy is Ni-15CR-2Mo-4W-4.5Al- 2.5Ti-2Ta- .15Zr-.05C-.01B-1.1Y2O3. The 1000 hour rupture strength in the longitudinal direction is about 145 MPa at 1093 C and about 483 MPa at 760 C. The alloy displays normal three-stage creep behavior. Typically the creep elongation is 3.5% at 760 C and 2% at 1093 C. The alloy is notch ductile (K sub 1 = 3.5). The rupture properties of the alloy are not significantly degraded by thermal cycling or prior stress isothermal exposure. The alloy also has excellent longitudinal high and low cycle fatigue resistance. Limited testing indicates that MA 6000E posesses good off-axis mechanical properties. The transverse tensile elongation at 760 C is about 3%. The 100 hour transverse rupture strength is 331 MPa at 760 C and about 55 MPa at 1093 C.

Kim, Y. G.↗

Calculation of residual principal stresses in CVD boron on carbon filaments

A three-dimensional finite element model of the chemical vapor deposition of boron on a carbon substrate (B/C) is developed. The model includes an expansion of the boron after deposition due to atomic rearrangement and includes creep of the boron and carbon. Curves are presented showing the variation of the principal residual stresses and the filament elongation with the parameters defining deposition strain and creep. The calculated results are compared with experimental axial residual stress and elongation measurements made on B/C filaments. For good agreement between calculated and experimental results, the deposited boron must continue to expand after deposition, and the build up of residual stresses must be limited by significant boron and carbon creep rates.

Behrendt, D. R.↗

Bolt-bearing fatigue of a graphite/epoxy laminate

Graphite/epoxy laminates were tested under bolt-bearing loads for a range of bolt clampup torques and for several test conditions involving water. High clampup torque improved both the static strength and fatigue limit by about 100 percent compared to a simple pin-bearing case, which had no through-the-thickness constraint. The static strength improvement was explained in terms of failure modes. Bolt clampup also influenced the hole elongation that developed before failure. For both the static and fatigue tests, the hole elongations were much larger for the low-torque clampup. Tests in water degraded static bearing strength only slightly, but reduced the fatigue limit about 40 percent below that for tests conducted in air.

Crews, J. H., Jr.↗

A model for the azimuthal brightness variations in Saturn's rings

The paper presents a model to explain brightness variations in Saturn rings. These variations have been interpreted as implying the presence of large, synchronously rotating particles with elongated shapes or leading-trailing-edge differences although such synchronous rotation appears unlikely. The model given here assumes that the gravitational wakes or waves can be considered as elongated distributions of particles referred to as blobs, and the radiative transfer in the rings will involve both processes internal to the blobs and analogous processes among blobs. This model explains the existence of azimuthal variation in ring brightness, as well as the dependence of their amplitude on geometrical and photometric parameters. The probable photometric effects are outlined assuming the existence of density irregularities as a result of self-gravitation, and the results simplify the geometric discussion of Franklin and Colombo (1978).

Lumme, K.↗

Diverse puzzling asteroids and a possible unified explanation

Recent observations have led to unconventional models of certain asteroids, suggesting previously unsuspected forms. Some of these include binary asteroids (e.g., 532 Herculina, 18 Melpomene), very irregular asteroids (e.g., the Mars-crossing 1580 Betulia), and very elongated asteroids, unlikely to be collisional fragments (e.g., 624 Hector). A connection is suggested between this observational work and ongoing theoretical work concerning collisions of large comparable-sized asteroids. Such collisions have different consequences from the collisions usually considered. The new work suggests possible sources of elongated and binary asteroids.

Hartmann, W. K.↗

Pseudocraters on Mars

In the Cydonia region of southern Acidalium Planitia are small, low-relief, apparently volcanic domelike structures, whose size, morphology, and general occurrence suggest they are martian analogs of terrestrial pseudocraters, a type of phreatic eruption. Average base diameters are about 800 m, which is somewhat larger than typical Icelandic examples. All the domes have summit pits; elongate domes generally have elongate summit pits or, in extreme cases, double pits. The greatest concentration of these domes is in a region of subdued fractured plains which may be old volcanic flows. Pseudocraters on the earth are produced when lava flows over water-logged ground. On Mars surface or subsurface ice was the likley medium that produced the steam eruptions resulting in cratered domelike structures on the lava surfaces.

Frey, H.↗

Calculation of residual principal stresses in CVD boron on carbon filaments

A three-dimensional finite element model of the chemical vapor deposition (CVD) of boron on a carbon substrate (B/C) is developed. The model includes an expansion of the boron after deposition due to atomic rearrangement and includes creep of the boron and carbon. Curves are presented to show how the principal residual stresses and the filament elongation vary as the parameters defining deposition strain and creep are varied. The calculated results are compared with experimental axial residual stress and elongation measurements made on B/C filaments. This comparison requires that for good agreement between calculated and experimental results, the deposited boron must continue to expand after deposition, and that the build-up of residual stresses is limited by significant boron and carbon creep rates.

Behrendt, D. R.↗

Effect of solar radiation on a swarm of meteoric particles

The theory of the Poynting-Robertson effect is used to study the motion of meteors relative to a parent comet describing an undisturbed elliptical orbit. It is shown that any emitted particle proceeds to move retrogressively away from the comet to a certain maximum angular distance (as seen from the sun) depending on its sigma-s value, and then undergoes relative motion in the opposite forward direction. The time taken to reach this greatest elongation behind the comet is the same for all particles, and after twice this time the particles will have returned to zero angular displacement relative to the comet. For comet Encke the time for the elongation to return to zero is about 6600 y; for Halley it is about 200,000 y; for Temple-Tuttle (1965 IV) it is just over 100,000 y.

Lyttleton, R. A.↗

Creep and stress rupture of oxide dispersion strengthened mechanically alloyed Inconel alloy MA 754

The creep and stress rupture behavior of the mechanically alloyed oxide dispersion strengthened nickel-base alloy MA 754 was studied at 760, 982 and 1093 C. Tensile specimens with a fine, highly elongated grain structure, oriented parallel and perpendicular to the longitudinal grain direction were tested at various stresses in air under constant load. It was found that the apparent stress dependence was large, with power law exponents ranging from 19 to 33 over the temperature range studied. The creep activation energy, after correction for the temperature dependence of the elastic modulus, was close to but slightly larger than the activation energy for self diffusion. Rupture was intergranular and the rupture ductility as measured by percentage elongation was generally low, with values ranging from 0.5 to 16 pct. The creep properties are rationalized by describing the creep rates in terms of an effective stress which is the applied stress minus a resisting stress consistent with the alloy microstructure. Values of the resisting stress obtained through a curve fitting procedure are found to be close to the values of the particle by-pass stress for this oxide dispersion strengthened alloy, as calculated from the measured oxide particle distribution.

Howson, T. E.↗