Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EFFECTIVE MASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Minimal realizations of Dirac neutrino mass from generic one-loop and two-loop topologies at d =5

We carry out a systematic investigation for the minimal Dirac neutrino mass models emerging from generic one-loop and two-loop topologies that arise from d = 5 effective operator with a singlet scalar, σ. To ensure that the tree-level Dirac mass, as well as Majorana mass terms at all orders, are absent for the neutrinos, we work in the framework where the Standard Model is supplemented by the well-motivated U(1)B-L gauge symmetry. At the one-loop level, we analyze six possible topologies, out of which two of them have the potential to generate desired Dirac neutrino mass. Adopting a systematic approach to select minimal models, we construct seventeen viable one-loop Dirac neutrino mass models. By embracing a similar methodical approach at the two-loop, we work out twenty-three minimal candidates. Among the forty selected economical models, the majority of the models proposed in this work are new. In our search, we also include the scenarios where the particles in the loop carry charges under the color group. Furthermore, we discuss the possible dark matter candidates within a given model, if any, without extending the minimal particle content.

79 ASTRONOMY AND ASTROPHYSICS↗

Atomically Dispersed Iron–Nitrogen Sites on Hierarchically Mesoporous Carbon Nanotube and Graphene Nanoribbon Networks for CO 2 Reduction

Atomically dispersed metal and nitrogen co-doped carbon (M-N/C) catalysts hold great promise for electrochemical CO 2 conversion. However, there is a lack of cost-effective synthesis approaches to meet the goal of economic mass production of single-atom M-N/C with desirable carbon support architecture for efficient CO 2 reduction. Herein, we report facile transformation of commercial carbon nanotube (CNT) into isolated Fe-N 4 sites anchored on carbon nanotube and graphene nanoribbon (GNR) networks (Fe-N/CNT@GNR). The oxidization-induced partial unzipping of CNT results in the generation of GNR nanolayers attached to the remaining fibrous CNT frameworks, which reticulates a hierarchically mesoporous complex and thus enables a high electrochemical active surface area and smooth mass transport. The Fe residues originating from CNT growth seeds serve as Fe sources to form isolated Fe-N-4 moieties located at the CNT and GNR basal plane and edges with high intrinsic capability of activating CO 2 and suppressing hydrogen evolution. The Fe-N/CNT@GNR delivers a stable CO Faradaic efficiency of 96% with a partial current density of 22.6 mA cm -2 at a low overpotential of 650 mV, making it one of the most active M-N/C catalysts reported. This work presents an effective strategy to fabricate advanced atomistic catalysts and highlights the key roles of support architecture in single-atom electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The complex heavy-quark potential in an anisotropic quark-gluon plasma — Statics and dynamics

We generalize a complex heavy-quark potential model from an isotropic QCD plasma to an anisotropic one by replacing the Debye mass m> D with an anisotropic screening mass depending on the quark pair alignment with respect to the direction of anisotropy. Such an angle-dependent mass is determined by matching the perturbative contributions in the potential model to the exact result obtained in the Hard-Thermal-Loop resummed perturbation theory. An advantage of the resulting potential model is that its angular dependence can be effectively described by using a set of angle-averaged screening masses as proposed in our previous work. Consequently, one could solve a one-dimensional Schrödinger equation with a potential model built by changing the anisotropic screening masses into the corresponding angle-averaged ones, and reproduce the full three-dimensional results for the binding energies and decay widths of low-lying quarkonium bound states to very high accuracy. Finally, turning to dynamics, we demonstrate that the one-dimensional effective potential can accurately describe the time evolution of the vacuum overlaps obtained using the full three-dimensional anisotropic potential. This includes the splitting of different p-wave polarizations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Body Mass Variation in an Introduced Wild Pig Population with Changing Ancestry

Total body mass variation was studied in a single wild pig (Sus scrofa) population that originated from three introductions of varying ancestry. Body mass data from 12,257 wild pigs collected over more than five decades were analyzed for differences due to the effects of sex, age class, reproductive status, season, and historic subpopulation groupings. Total body mass data from this population averaged 38 kg and ranged from 0.511 to 189 kg. The overall observed range of body mass data was consistent with previous studies. Very heavy individuals (i.e., >150 kg) made up only a small percentage of the overall population. Males were significantly larger than females, being on average 1.09 times heavier. This significant sexual dimorphic difference was seen in all but the piglet age class. This percent dimorphic difference increased with age. Body mass variation and overlap between the age classes also increased with age. Males were more variable than females within the same age class. The study area’s wild pigs were on average born at slightly less than one percent of their adult body mass. Percent weight gain toward the adult body mass increased with age and was slightly greater in females than in males. In contrast, absolute weight gain between age classes was greater in males. Pregnant sows were significantly heavier than non-pregnant females in all age class comparisons; however, this difference decreased with age. There was a seasonal shift in body mass with age, with younger age classes being heaviest in the fall-winter period and the older age classes being heaviest in spring-summer. Having originated from different ancestral stocks, two major subpopulations of wild pigs on the study area differed significantly in body mass in all sex and age class comparisons. The SRS wild pig population showed a decrease in body mass during the 1990s that was significant. This change may have been the result of both ancestral and population density variation, as well as unspecified environmental factors

59 BASIC BIOLOGICAL SCIENCES↗

Beyond mass: detecting secondary halo properties with galaxy-galaxy lensing

ABSTRACT Secondary halo properties beyond mass, such as the mass accretion rate (MAR), concentration, and the half mass scale, are essential in understanding the formation of large-scale structure and dark matter haloes. In this paper, we study the impact of secondary halo properties on the galaxy-galaxy lensing observable, ΔΣ. We build an emulator trained on N-body simulations to model ΔΣ and quantify the impact of different secondary parameters on the ΔΣ profile. We focus on the impact of MAR on ΔΣ. We show that a 3σ detection of variations in MAR at fixed halo mass could be achieved with the Hyper Suprime Cam survey assuming no baryonic effects and a proxy for MAR with scatter <1.5. We show that the full radial profile of ΔΣ depends on secondary properties at fixed halo mass. Consequently, an emulator that can perform full shape fitting yields better than two times improvement upon the constraints on MAR than only using the outer part of the halo. Finally, we highlight that miscentring and MAR impact the radial profile of ΔΣ in a similar fashion, implying that miscentring and MAR need to be modelled jointly for unbiased estimates of both effects. We show that present-day lensing data sets have the statistical capability to place constraints on halo MAR within our assumptions. Our analysis opens up new possibilities for observationally measuring the assembly history of the dark matter haloes that host galaxies and clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Distinguishing prompt-collapse binary neutron star mergers from binary black Holes: Tidal effects and remnant properties

We study the properties of remnants formed in prompt-collapse binary neutron star mergers. We consider nonspinning neutron star binaries over a range of total masses and mass ratios across a set of 22 equations of state, totaling 107 numerical relativity simulations. We report the final mass and spin of the systems (including the accretion disk and ejecta) to be constrained in a narrow range—0.98 ≲ 𝑀 𝑓 /𝑀 ≲ 0.99 for the mass and 0.85 ≲ 𝑎 𝑓 ≲ 0.95 for the dimensionless spin—regardless of the binary configuration and matter effects. This sets them apart from binary black hole merger remnants. We assess the detectability of the postmerger signal in a future 40 km Cosmic Explorer observatory and find that the signal-to-noise ratio in the postmerger of an optimally located and oriented binary at a distance of 100 Mpc can range from <1 to 8, depending on the binary configuration and equation of state, with a majority of them greater than 4 in the set of simulations that we consider. We also consider the distinguishability between prompt-collapse binary neutron star and binary black hole mergers with the same masses and spins. We find that Cosmic Explorer will be able to distinguish such systems primarily via the measurement of tidal effects in the late inspiral. Neutron star binaries with reduced tidal deformability $\tilde{Λ}$ as small as ∼ 3.5 can be identified up to a distance of 100 Mpc, while neutron star binaries with $\tilde{Λ}$ ∼ 22 can be identified to distances greater than 250 Mpc. This is larger than the distance up to which the postmerger will be visible. Finally, we discuss the possible implications of our findings for the equation of state of neutron stars from the gravitational wave event GW230529.

79 ASTRONOMY AND ASTROPHYSICS↗

Regulation of Cathode Mass and Charge Transfer by Structural 3D Engineering for Protonic Ceramic Fuel Cell at 400 °C

Abstract Lowering the operating temperature (ideally below 400 °C) for solid oxide fuel cell (SOFC) technology deployment has been an important transition that introduces the benefit of reduced operational costs and system durability. However, the key technical issue limiting the transition is the sluggish cathodic performance, namely the oxygen reduction reaction (ORR) rate of the conventional sponge‐like cathode dramatically drops as the temperature reduces. In this paper, 3D engineering of a cathode is conducted on a protonic ceramic fuel cell to obtain an enhanced ORR between 400 and 600 °C. Compared with a cell using a conventional sponge‐like cathode, 3D engineering improves the cathode ORR by 41% at 400 °C with a peak power density of 0.410 W cm −2 . A phase field simulation is applied to assist the engineering by understanding the competition between the cathode mass and charge transfer with different cathode porosities. The results show that structural engineering of existing well‐developed cathodes is a simple and effective method to promote cathode ORR for low temperature SOFC by regulating the mass and charge transfer.

Bian, Wenjuan↗

Direct and semi-direct radiative forcing of biomass-burning aerosols over the southeast Atlantic (SEA) and its sensitivity to absorbing properties: a regional climate modeling study

Simulations are performed for the period 2000-2015 by two different regional climate models, ALADIN and RegCM, to quantify the direct and semi-direct radiative effects of biomass-burning aerosols (BBAs) in the southeast Atlantic (SEA) region. Different simulations have been performed using strongly absorbing BBAs in accordance with recent in situ observations over the SEA. For the July-August-September (JAS) season, the single scattering albedo (SSA) and total aerosol optical depth (AOD) simulated by the ALADIN and RegCM models are consistent with the MACv2 climatology and MERRA-2 and CAMS-RA reanalyses near the biomass-burning emission sources. However, the above-cloud AOD is slightly underestimated compared to satellite (MODIS and POLDER) data during the transport over the SEA. The direct radiative effect exerted at the continental and oceanic surfaces by BBAs is significant in both models and the radiative effects at the top of the atmosphere indicate a remarkable regional contrast over SEA (in all-sky conditions), with a cooling (warming) north (south) of 10°S, which is in agreement with the recent MACv2 climatology. In addition, the two models indicate that BBAs are responsible for an important shortwave radiative heating of ~0.5-1K per day over SEA during JAS with maxima between 2 and 4 km a.m.s.l. (above mean sea level). At these altitudes, BBAs increase air temperature by ~0.2-0.5 K, with the highest values being co-located with low stratocumulus clouds. Vertical changes in air temperature limit the subsidence of air mass over SEA, creating a cyclonic anomaly. The opposite effect is simulated over the continent due to the increase in lower troposphere stability. The BBA semi-direct effect on the lower troposphere circulation is found to be consistent between the two models. Changes in the cloud fraction are moderate in response to the presence of smoke, and the models differ over the Gulf of Guinea. Finally, the results indicate an important sensitivity of the direct and semi-direct effects to the absorbing properties of BBAs. Over the stratocumulus (Sc) region, DRE varies from +0.94 W m -2 (scattering BBAs) to +3.93 W m -2 (most absorbing BBAs).

54 ENVIRONMENTAL SCIENCES↗

Pattern formation in a coupled membrane-bulk reaction-diffusion model for intracellular polarization and oscillations

Reaction-diffusion systems have been widely used to study spatio-temporal phenomena in cell biology, such as cell polarization. Coupled bulk-surface models naturally include compartmentalization of cytosolic and membrane-bound polarity molecules. Here we study the distribution of the polarity protein Cdc42 in a mass-conserved membrane-bulk model, and explore the effects of diffusion and spatial dimensionality on spatio-temporal pattern formation. We first analyze a one-dimensional (1-D) model for Cdc42 oscillations in fission yeast, consisting of two diffusion equations in the bulk domain coupled to nonlinear ODEs for binding kinetics at each end of the cell. In 1-D, our analysis reveals the existence of symmetric and asymmetric steady states, as well as anti-phase relaxation oscillations typical of slow-fast systems. We then extend our analysis to a two-dimensional (2-D) model with circular bulk geometry, for which species can either diffuse inside the cell or become bound to the membrane and undergo a nonlinear reaction-diffusion process. We also consider a nonlocal system of PDEs approximating the dynamics of the 2-D membrane-bulk model in the limit of fast bulk diffusion. In all three model variants we find that mass conservation selects perturbations of spatial modes that simply redistribute mass. In 1-D, only anti-phase oscillations between the two ends of the cell can occur, and in-phase oscillations are excluded. In higher dimensions, no radially symmetric oscillations are observed. Instead, the only instabilities are symmetry-breaking, either corresponding to stationary Turing instabilities, leading to the formation of stationary patterns, or to oscillatory Turing instabilities, leading to traveling and standing waves. Codimension-two Bogdanov—Takens bifurcations occur when the two distinct instabilities coincide, causing traveling waves to slow down and to eventually become stationary patterns. Our work clarifies the effect of geometry and dimensionality on behaviors observed in ma.ss-conserved cell polarity models.

97 MATHEMATICS AND COMPUTING↗

Effective direct steam regeneration of bis-iminoguanidine solid sorbent used for carbon dioxide capture

A cost-effective, energy-efficient sorbent regeneration process for phase-changing guanidines used for CO 2 capture was developed based on direct-steam stripping. This approach enhances the regeneration rate, simplifies the overall CO 2 capture process, and reduces the energy cost compared to conventional conductive thermal regeneration. A direct-steam sorbent regeneration reactor was developed, demonstrating that aqueous bis(iminoguanidines) (BIG) sorbents, e.g., methylglyoxal-bis(iminoguanidine) (MGBIG) and glyoxal-bis(iminoguanidine) (GBIG), could be efficiently regenerated with up to ~ 99 % CO 2 recovery through direct-steam stripping. Using low-temperature steam at 100 °C, a 4.5 times faster regeneration rate for GBIG carbonate sorbent (e.g., 30 min for 10 g) was demonstrated compared to conductive-heating (e.g., 135 min for 10 g) at 130 °C. Additionally, fully regenerated MGBIG converts into an aqueous MGBIG solution when the steam condenses onto the sorbent surface. Condensed steam with the guanidine can be easily recycled as an aqueous solution into the gas–liquid contactor to achieve a continuous-flow CO 2 -capture process. Molecular dynamics simulation was employed to provide a better understanding of the process. Higher heat transfer rates from steam to guanidine carbonate, compared to air heating, were attributed to the vibration resonance of water molecules within MGBIG with that of vapor molecules and the effective transfer of kinetic energy from vapor to solid. Technoeconomic analysis demonstrated that direct-steam stripping significantly decreases the CO 2 capture cost by 50 % compared to traditional conductive heating methods. Further, enhanced mass transfer facilitated by low-temperature steam and subsequent condensation effectively heats up the H 2 O-containing BIG-carbonate crystals, facilitating the desorption of CO 2 from the solid crystals, thereby leading to fast, effective, and energy-efficient sorbent regeneration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable cycling of high-mass loaded MnO 2 electrodes for sodium-ion batteries

Achieving cost-effective, sustainable solutions for large-scale energy storage are critical for advancing the global clean energy transition. In view of the challenges posed by limited lithium reserves, low-cost sodium-ion batteries (SIBs) have emerged as a promising direction, especially for grid-level energy storage. Among the various battery electrode materials, manganese dioxide (MnO 2 ) stands out as a favorable choice for such large-scale applications due to its earth abundance, cost-effectiveness, and non-toxic nature. Although MnO 2 is known as a pseudocapacitive material with superior cycling stability in aqueous electrolytes, its dissolution in non-aqueous electrolytes has restricted its use in long-lifetime batteries. In this study, we address two issues which have limited the use of MnO 2 electrodes in non-aqueous electrolytes. First, using electrochemical quartz crystal microbalance measurements in combination with other electrochemical methods, we demonstrate that diglyme (bis(2-methoxyethyl) ether) electrolyte can achieve stable cycling of electrodeposited ε-MnO 2 . These results enable us to tackle a second objective, that is increasing the mass loading of the MnO 2 electrode, since achieving high areal energy density is a significant factor in reducing manufacturing costs. Using 3D printed graphene aerogel (GA) as a scaffold, our studies show that the electrodeposited MnO 2 /GA electrodes possess scalable properties with mass loadings from 20 to 80 mg cm −2 . The resulting electrodes exhibit areal energy densities as high as 4.4 mA h cm −2 at a current density of 10 mA cm −2 . The high mass loaded MnO 2 electrodes were incorporated as a cathode in a SIB which used TiO 2 as the anode. The SIB device exhibited excellent performance with power densities in excess of 70 mW cm −2 . These studies highlight the promise of MnO 2 electrodes for use in a low-cost technology for large-scale energy storage.

25 ENERGY STORAGE↗

Adapting a Low-Cost and Open-Source Commercial Pipetting Robot for Nanoliter Liquid Handling

Nanoliter liquid handling capabilities in bioanalytical workflows can reduce reagent costs and improve sample processing efficiency. Here we report the successful modification of a low-cost commercially available pipetting robot, the Opentrons 1 (OT1), using inexpensive 3D-printed parts to accommodate low-nanoliter volumes. The pipetting accuracy and precision of the modified OT1 for 50 nL volumes of water was 0.2% and 2%, respectively. The accuracy and precision at 20 nL was 1% and 3.8%, respectively. The platform was successfully applied to the preparation of low-nanogram proteomic samples for liquid chromatography-mass spectrometry analysis. The modified OT1 is thus an effective platform for nanoliter liquid handling and, at a total cost of less than $6000 including the commercial liquid handler and all modifications, is far less expensive and more versatile than other platforms with similar capabilities, placing this technology within reach of a far broader scientific community.

47 OTHER INSTRUMENTATION↗

Near-extremal charged black holes: greybody factors and evolution

As a charged black hole reaches its extremal state via Hawking radiation, quantum effects become important for its thermodynamic properties when its temperature is below a mass gap scale. Using AdS 2 /CFT 1 correspondence and solutions for the corresponding Schwarzian action, we calculate the black hole greybody factors including the quantum effects. In the low temperature limit, the greybody factors scale as T 2s+3/2 with s the radiated field spin. Hence, the Hawking radiation of a near-extremal charged black hole (NEBH) is dominated by emitting scalar particles including the Higgs boson. Time evolution of an NEBH is also calculated and shows a stochastic feature. For an NEBH lighter than around 10 8 times the Planck mass, its temperature at the current universe is below the mass gap scale and is universally tens of GeV, which is important if one searches for primordial (hidden) charged black holes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Ab initio calculation of the β-decay spectrum of 6 He

Here, we calculate the β spectrum in the decay of 6 He using quantum Monte Carlo methods with nuclear interactions derived from chiral effective field theory and consistent weak vector and axial currents. We work at second order in the multipole expansion, retaining terms suppressed by O(q 2 /m$^{2}_{π}$), where q denotes low-energy scales such as the reaction’s Q value or the electron energy, and m π is the pion mass. We go beyond the impulse approximation by including the effects of two-body vector and axial currents. We estimate the theoretical error on the spectrum by using four potential models in the Norfolk family of local two- and three-nucleon interactions, which have different cutoffs, fit two-nucleon data up to different energies, and use different observables to determine the couplings in the three-body force. We find the theoretical uncertainty on the β spectrum, normalized by the total rate, to be well below the permille level, and to receive contributions of comparable size from first- and second-order corrections in the multipole expansion. We consider corrections to the β decay spectrum induced by beyond-standard-model charged-current interactions in the standard model effective field theory, with and without sterile neutrinos, and discuss the sensitivity of the next generation of experiments to these interactions.

6 ≤ A ≤ 19↗

Visual Orbits of Spectroscopic Binaries with the CHARA Array. III. HD 8374 and HD 24546

We present the visual orbits of two long-period spectroscopic binary stars, HD 8374 and HD 24546, using interferometric observations acquired with the CHARA Array and the Palomar Testbed Interferometer. We also obtained new radial velocities from echelle spectra using the APO 3.5 m and Fairborn 2.0 m telescopes. By combining the visual and spectroscopic observations, we solve for the full, three-dimensional orbits and determine the stellar masses and distances to within 3% uncertainty. We then estimate the effective temperature and radius of each component star through Doppler tomography and spectral energy distribution analyses, in order to compare the observed stellar parameters to the predictions of stellar evolution models. For HD 8374, we find masses of M {sub 1} = 1.636 ± 0.050M {sub ⊙} and M {sub 2} = 1.587 ± 0.049M {sub ⊙}, radii of R {sub 1} = 1.84 ± 0.05R {sub ⊙} and R {sub 2} = 1.66 ± 0.12R {sub ⊙}, temperatures of T{sub eff1}=7280±110 K and T{sub eff2}=7280±120 K, and an estimated age of 1.0 Gyr. For HD 24546, we find masses of M {sub 1} = 1.434 ± 0.014M {sub ⊙} and M {sub 2} = 1.409 ± 0.014M {sub ⊙}, radii of R {sub 1} = 1.67 ± 0.06R {sub ⊙} and R {sub 2} = 1.60 ± 0.10R {sub ⊙}, temperatures of T{sub eff1}=6790±120 K and T{sub eff2}=6770±90 K, and an estimated age of 1.4 Gyr. HD 24546 is therefore too old to be a member of the Hyades cluster, despite its physical proximity to the group.

79 ASTRONOMY AND ASTROPHYSICS↗

A new approach for measuring the carbon and oxygen content of atmospherically relevant compounds and mixtures

Abstract. Due to its complexity, gas- and particle-phase organic carbon in the atmosphere is often classified by its bulk physicochemical properties. However, there is a dearth of robust, moderate-cost approaches to measure the bulk chemical composition of organic carbon in the atmosphere. This is particularly true for the degree of oxygenation, which critically affects the properties and impacts of organic carbon but for which routine measurement approaches are lacking. This gap has limited the understanding of a wide range of atmospheric components, including particulate matter, the mass of which is monitored worldwide due to its health and environmental effects but the chemical characterization of which requires relatively high capital costs and complex operation by highly trained technical personnel. In this work, we demonstrate a new approach to estimate the mass of carbon and oxygen in analytes and mixtures that relies only on robust, moderate-cost detectors designed for use with gas chromatography. Organic compounds entering a flame ionization detector were found to be converted with approximately complete efficiency to CO2, which was analyzed downstream using an infrared detector to measure the mass of carbon analyzed. The ratio of the flame ionization detector (FID) signal generated to CO2 formed (FID∕CO2) was shown to be strongly correlated (R2=0.89) to the oxygen-to-carbon ratio (O∕C) of the analyte. Furthermore, simple mixtures of analytes behaved as the weighted average of their components, indicating that this correlation extends to mixtures. These properties were also observed to correlate well with the sensitivity of the FID estimated by structure activity relationships (quantified as the relative effective carbon number). The relationships between measured FID∕CO2, analyte O∕C, and FID sensitivity allow the estimation of one property from another with <15 % error for mixtures and <20 % error for most individual analytes. The approach opens the possibility of field-deployable, autonomous measurement of the carbon and oxygen content of particulate matter using time-tested, low-maintenance detectors, though such an application would require some additional testing on complex mixtures. With some instrumental modifications, similar measurements on gas-phase species may be feasible. Moreover, the potential expansion to additional gas chromatography detectors may provide concurrent measurement of other elements (e.g., sulfur, nitrogen).

42 ENGINEERING↗

Gas Production from Hot Water Circulation through Hydraulic Fractures in Methane Hydrate-Bearing Sediments: THC-Coupled Simulation of Production Mechanisms

Methane hydrates, widely found in permafrost and deep marine sediments, have great potential as a future energy 6 source. Conventional production schemes perform poorly for challenging hydrate reservoirs with low permeability. We propose an 7 efficient production scheme by combining hydraulic fracturing from horizontal wells and hot water circulation through fractures. A 8 fully coupled thermo-hydro-chemical (THC) model is developed to simulate the key physical processes during gas production from 9 a hydrate reservoir representative of typical geological settings in Shenhu, South China Sea. We found that the gas production 10 process has two distinct stages divided by thermal breakthrough: a relatively short prebreakthrough stage and a postbreakthrough 11 stage yielding stable gas production. Heat advection along and near the hydraulic fracture dominates the prebreakthrough stage, 12 whereas conduction-driven thermal recovery in the volume around fractures dominates the postbreakthrough stage. We identified 13 that the steady-state injection temperature has a strong effect on the performance of the proposed scheme while the fluid mass 14 circulation rate has a moderate impact beyond a threshold. The proposed scheme proves to be efficient and robust over a range of 15 reservoir conditions with respect to initial hydrate saturation and intrinsic permeability, including their spatial heterogeneities, 16 thereby offering a promising solution for challenging reservoir conditions.

gas hydrate, fracture flow, gas production, numeri↗

Constraints on the Muon Fraction and Density Profile in Neutron Stars

Muons in neutron stars (NSs) play especially important roles in addressing several interesting new physics questions associated with detecting as well as understanding interactions and astrophysical effects of muonphilic dark matter particles. The key model inputs for studying the latter are the total muon mass M μ , the muon mass fraction M μ /M NS over the NS mass M NS , and the muon radial density profile ρ μ (r) in NSs of varying masses. We investigate these quantities within a minimum model for the core of NSs consisting of neutrons, protons, electrons, and muons using an explicitly isospin-dependent parametric equation of state (EOS) constrained by available nuclear laboratory experiments and the latest astrophysical observations of NS masses, radii, and tidal deformabilities. Here, we found that the absolutely maximum muon mass M μ and its mass fraction M μ /M NS in the most massive NSs allowed by causality are about 0.025 M ⊙ and 1.1%, respectively. For the most massive NS of mass 2.14 M ⊙ observed so far, they reduce to about 0.020 M ⊙ and 0.9%, respectively. We also study respective effects of individual parameters describing the EOS of high-density neutron-rich nucleonic matter on the muon contents in NSs with varying masses. We found that the most important but uncertain nuclear physics ingredient for determining the muon contents in NSs is the high-density nuclear symmetry energy.

79 ASTRONOMY AND ASTROPHYSICS↗