Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISULFIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Effects of line defects on spin-dependent electronic transport of zigzag MoS{sub 2} nanoribbons

The nonlinear spin-dependent transport properties in zigzag molybdenum-disulfide nanoribbons (ZMNRs) with line defects are investigated systematically using nonequilibrium Green’s function method combined with density functional theory. The results show that the line defects can enhance the electronic transfer ability of ZMNRs. The types and locations of the line defects are found critical in determining the spin polarization and the current-voltage (I-V) characteristics of the line defected ZMNRs. For the same defect type, the total currents of the ribbons with the line defects in the centers are lager than those on the edges. And for the same location, the total currents of the systems with the sulfur (S) line defect are larger than the according systems with the molybdenum (Mo) line defect. All the considered systems present magnetism properties. And in the S line defected systems, the spin reversal behaviors can be observed. In both the spin-up and spin-down states of the Mo line defected systems, there are obvious negative differential resistance behaviors. The mechanisms are proposed for these phenomena.

36 MATERIALS SCIENCE↗

Pulsed cathodoluminescence and Raman spectra of MoS{sub 2} and WS{sub 2} nanocrystals and their combination MoS{sub 2}/WS{sub 2} produced by self-propagating high-temperature synthesis

Molybdenum and tungsten disulfide nanoplates were produced by self-propagating high-temperature synthesis in argon atmosphere. This method provides an easy way to produce MoS{sub 2} and WS{sub 2} from nanoplates up to single- and several layers. The Raman peak intensities corresponding to in-plane E{sup 1}{sub 2g} and out-of-plane A{sub 1g} vibration modes and their shifts strongly depend on the thicknesses of the MoS{sub 2} and WS{sub 2} platelets indicating size-dependent scaling laws and properties. An electron beam irradiation of MoS{sub 2} and WS{sub 2} powders leads to an occurrence of pulsed cathodoluminescence (PCL) spectra at 575 nm (2.15 eV) and 550 nm (2.25 eV) characteristic to their intrinsic band gaps. For the combination of MoS{sub 2} and WS{sub 2} nanopowders, a PCL shoulder at 430 nm (2.88 eV) was observed, which is explained by the radiative electron-hole recombination at the MoS{sub 2}/WS{sub 2} grain boundaries. The luminescence decay kinetics of the MoS{sub 2}/WS{sub 2} nanoplates appears to be slower than for individual MoS{sub 2} and WS{sub 2} platelets due to a spatial separation of electrons and holes at MoS{sub 2}/WS{sub 2} junction resulting in extension of recombination time.

36 MATERIALS SCIENCE↗

Photoreflectance study of the near-band-edge transitions of chemical vapor deposition-grown mono- and few-layer MoS{sub 2} films

Room-temperature photoreflectance (PR) and reflectance (R) spectroscopy are utilized to investigate the near-band-edge transitions of molybdenum disulfide (MoS{sub 2}) thin films grown on sapphire substrates by a hot-wall chemical vapor deposition system. The layer thickness and optical properties of the MoS{sub 2} thin films are confirmed by Raman spectroscopy, atomic force microscope, and photoluminescence (PL) analysis. The B exciton shows relatively weak PL intensity in comparing with the A exciton even for monolayer MoS{sub 2} films. In the R spectrum of few‐layer MoS{sub 2}, it is not possible to clearly observe exciton related features. The PR spectra have two sharp, derivative-like features on a featureless background. Throughout the PR lineshape fitting, the transition energies are designated as the A and B excitons at the K-point of the Brillouin zone, but at room temperature there seems to be no distinguishable feature corresponding to an H‐point transition for the mono- and few-layer MoS{sub 2} films unlike in bulk. These transition energies are slightly larger than those obtained by PL, which is attributed to the Stokes shifts related to doping level. The obtained values of valence-band spin-orbit splitting are in good agreement with those from other experimental methods. By comparing the PR lineshapes, the dominant modulation mechanism is attributed to variations of the exciton transition energies due to change in the built-in electric field. On the strength of this study, PR spectroscopy is demonstrated as a powerful technique for characterizing the near-band-edge transitions of MoS{sub 2} from monolayer to bulk.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wettability and friction of water on a MoS{sub 2} nanosheet

The molybdenum disulfide (MoS{sub 2}) nanosheet is a promising two-dimensional (2D) material and has recently been used in biological sensing. While the electronic structure of 2D MoS{sub 2} sheet has been actively studied, the role of its atomic structure and thus the interfacial interactions with bio-fluids are still elusive. Using Molecular dynamics simulations, we developed MoS{sub 2} force field parameters to reproduce the experimentally determined water contact angle of the MoS{sub 2} nanosheet and then predicted the slip-length of water that has not been measured in experiment yet. Simulation results suggest that the MoS{sub 2} nanosheet is a hydrophobic and low-friction surface, despite its seemingly significant charges of surface atoms and relatively strong strength of van der Waals potentials. We expect that the developed force fields for depicting surface atoms of MoS{sub 2} will facilitate future research in understanding biomolecule-MoS{sub 2} interactions in MoS{sub 2}-based biosensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MoS{sub 2} spaser

We present a comprehensive analysis of a spaser made of a circular shaped highly doped molybdenum disulfide (MoS{sub 2}) resonator. “Spaser” is an acronym for “surface plasmon amplification by stimulated emission of radiation”–a nanoscale source of surface plasmons generated by stimulated emission in a plasmonic resonator which receives energy nonradiatively. By considering localized surface plasmon modes, operation characteristics of the model are analysed, and tunability of the design is demonstrated. We find the optimum geometric and material parameters of the spaser that provides efficient outputs and carryout a comparative analysis with a similar circular spaser made of graphene. Owing to physical and chemical properties of MoS{sub 2} and the active medium, the proposed design delivers efficient outputs in terms of spaser mode energy, operating thresholds, Q-factor, and electric field amplitude. Lower operating thresholds and higher mode energies are notable advantages of the design. Owing to having many superior features to existing similar designs, this MoS{sub 2} spaser may be much suited for applications in nanoplasmonic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced monolayer MoS{sub 2}/InP heterostructure solar cells by graphene quantum dots

We demonstrate significantly improved photovoltaic response of monolayer molybdenum disulfide (MoS{sub 2})/indium phosphide (InP) van der Waals heterostructure induced by graphene quantum dots (GQDs). Raman and photoluminescence measurements indicate that effective charge transfer takes place between GQDs and MoS{sub 2}, which results in n-type doping of MoS{sub 2}. The doping effect increases the barrier height at the MoS{sub 2}/InP heterojunction, thus the averaged power conversion efficiency of MoS{sub 2}/InP solar cells is improved from 2.1% to 4.1%. The light induced doping by GQD provides a feasible way for developing more efficient MoS{sub 2} based heterostructure solar cells.

14 SOLAR ENERGY↗

Band gap engineering of MoS{sub 2} upon compression

Molybdenum disulfide (MoS{sub 2}) is a promising candidate for 2D nanoelectronic devices, which shows a direct band-gap for monolayer structure. In this work we study the electronic structure of MoS{sub 2} upon both compressive and tensile strains with first-principles density-functional calculations for different number of layers. The results show that the band-gap can be engineered for experimentally attainable strains (i.e., ±0.15). However, compressive strain can result in bucking that can prevent the use of large compressive strain. We then studied the stability of the compression, calculating the critical strain that results in the on-set of buckling for free-standing nanoribbons of different lengths. The results demonstrate that short structures, or few-layer MoS{sub 2}, show semi-conductor to metal transition upon compressive strain without bucking.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exploring biological effects of MoS{sub 2} nanosheets on native structures of α-helical peptides

Recent reports of mono- and few-layer molybdenum disulfide (MoS{sub 2}), a representative transition metal dichacogenide (TMD), as antibacterial and anticancer agents have shed light on their potential in biomedical applications. To better facilitate these promising applications, one needs to understand the biological effects of these TMDs as well, such as their potential adverse effects on protein structure and function. Here, we sought to understand the interaction of MoS{sub 2} nanosheets with peptides using molecular dynamics simulations and a simple model polyalanine with various lengths (PA{sub n}, n = 10, 20, 30, and 40; mainly α − helices). Our results demonstrated that MoS{sub 2} monolayer has an exceptional capability to bind all peptides in a fast and strong manner. The strong attraction from the MoS{sub 2} nanosheet is more than enough to compensate the energy needed to unfold the peptide, regardless of the length, which induces drastic disruptions to the intra-peptide hydrogen bonds and subsequent secondary structures of α − helices. This universal phenomenon may point to the potential nanotoxicity of MoS{sub 2} when used in biological systems. Moreover, these results aligned well with previous findings on the potential cytotoxicity of TMD nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phonon thermal conductivity of monolayer MoS{sub 2}

We use nonequilibrium molecular dynamics modeling using Stillinger–Weber interatomic potential to investigate the thermal properties of monolayer molybdenum disulfide (MoS{sub 2}) nanoribbons. We study the impact of factors such as length, edge chirality, monovacancies, and uniaxial stretching on the thermal conductivity of MoS{sub 2} nanoribbons. Our results show that longer ribbons have a higher thermal conductivity, and the thermal conductivity of infinitely long zigzag and armchair MoS{sub 2} nanoribbons is, respectively, 54 W/mK and 33 W/mK. This is significantly lower than the thermal conductivity of some other graphene-like two-dimensional materials such as graphene and boron nitride. While the presence of molybdenum or sulfur vacancies reduces the thermal conductivity of ribbons, molybdenum vacancies have a more deteriorating effect on thermal conductivities. We also have studied the impact of uniaxial stretching on the thermal conductivity of MoS{sub 2} nanoribbons. The results show that in contrast to three dimensional materials, thermal conductivity of MoS{sub 2} is fairly insensitive to stretching. We have used the phonon dispersion curves and group velocities to investigate the mechanism of this unexpected behavior. Our results show that tensile strain does not alter the phonon dispersion curves and hence the thermal conductivity does not change.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancement of carrier mobility in MoS{sub 2} field effect transistors by a SiO{sub 2} protective layer

Molybdenum disulfide is a promising channel material for field effect transistors (FETs). In this paper, monolayer MoS{sub 2} grown by chemical vapor deposition (CVD) was used to fabricate top-gate FETs through standard optical lithography. During the fabrication process, charged impurities and interface states are introduced, and the photoresist is not removed cleanly, which both limit the carrier mobility and the source-drain current. We apply a SiO{sub 2} protective layer, which is deposited on the surface of MoS{sub 2}, in order to avoid the MoS{sub 2} directly contacting with the photoresist and the ambient environment. Therefore, the contact property between the MoS{sub 2} and the electrodes is improved, and the Coulomb scattering caused by the charged impurities and the interface states is reduced. Comparing MoS{sub 2} FETs with and without a SiO{sub 2} protective layer, the SiO{sub 2} protective layer is found to enhance the characteristics of the MoS{sub 2} FETs, including transfer and output characteristics. A high mobility of ∼42.3 cm{sup 2}/V s is achieved, which is very large among the top-gate CVD-grown monolayer MoS{sub 2} FETs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High performance and transparent multilayer MoS{sub 2} transistors: Tuning Schottky barrier characteristics

Various strategies and mechanisms have been suggested for investigating a Schottky contact behavior in molybdenum disulfide (MoS{sub 2}) thin-film transistor (TFT), which are still in much debate and controversy. As one of promising breakthrough for transparent electronics with a high device performance, we have realized MoS{sub 2} TFTs with source/drain electrodes consisting of transparent bi-layers of a conducting oxide over a thin film of low work function metal. Intercalation of a low work function metal layer, such as aluminum, between MoS{sub 2} and transparent source/drain electrodes makes it possible to optimize the Schottky contact characteristics, resulting in about 24-fold and 3 orders of magnitude enhancement of the field-effect mobility and on-off current ratio, respectively, as well as transmittance of 87.4 % in the visible wavelength range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement-mode operation of multilayer MoS{sub 2} transistors with a fluoropolymer gate dielectric layer

Enhancement-mode multilayer molybdenum disulfide (MoS{sub 2}) field-effect transistors (FETs), which are an immensely important component toward low-power electronics based on a two-dimensional layered semiconductor, are demonstrated using the fluoropolymer CYTOP as a gate dielectric. The fabricated devices exhibit threshold voltage (V{sub TH}) of ∼5.7 V with field-effect mobility (μ{sub FE}) of up to 82.3 cm{sup 2}/V s, and the characteristics are compared with the depletion-mode characteristics of MoS{sub 2} FETs with the cross-linked Poly(4-vinylphenol) gate dielectric (V{sub TH} ∼ −7.8 V). UV photoelectron spectroscopy analysis indicates that increased surface potential due to the surface dipole effect of the fluorine group influences the positive V{sub TH} shift.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling of the photodetector based on the multilayer graphene nanoribbons

Graphene nanoribbon (GNR), which has unique properties and advantages, is a crucial component of nanoelectornic devices, especially in the development of photoelectric detectors. In this work, an infrared photodetector based on the structure of stacked multiple-GNRs, which is separated by a little thick barrier layers (made of tungsten disulfide or related materials) to prevent tunneling current, is proposed and modeled. Operation of photoelectric detector is related to the electron cascaded radiative transition in the adjacent GNRs strengthened by the electrons heated due to the incident light. With a developed model, the working principle is analyzed and the relationships for the photocurrent and dark current as functions of the intensity of the incident radiation are derived. The spectral dependence of the responsivity and detectivity for graphene nanoribbons photodetector (GNRs-PT) with different Fermi energy, band gaps and numbers of GNRs layers are analyzed as well. The results demonstrate that the spectral characteristics depend on the GNRs band gap, which shows a potential on GNRs-PT application in the multi-wavelength systems. In addition, GNRs-PT has a better spectrum property and higher responsivity compared to photodetectors based on In{sub x}Ga{sub x}As in room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication and independent control of patterned polymer gate for a few-layer WSe{sub 2} field-effect transistor

We report the fabrication of a patterned polymer electrolyte for a two-dimensional (2D) semiconductor, few-layer tungsten diselenide (WSe{sub 2}) field-effect transistor (FET). We expose an electron-beam in a desirable region to form the patterned structure. The WSe{sub 2} FET acts as a p-type semiconductor in both bare and polymer-covered devices. We observe a highly efficient gating effect in the polymer-patterned device with independent gate control. The patterned polymer gate operates successfully in a molybdenum disulfide (MoS{sub 2}) FET, indicating the potential for general applications to 2D semiconductors. The results of this study can contribute to large-scale integration and better flexibility in transition metal dichalcogenide (TMD)-based electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation-induced direct bandgap transition in few-layer MoS 2

We report photoluminescence (PL) spectroscopy of air-suspended and substrate-supported molybdenum disulfide (MoS 2 ) taken before and after exposure to proton radiation. For 2-, 3-, and 4-layer MoS 2 , the radiation causes a substantial (>10×) suppression of the indirect bandgap emission, likely due to a radiation-induced decoupling of the layers. For all samples measured (including the monolayer), we see the emergence of a defect-induced shoulder peak at around 1.7 eV, which is redshifted from the main direct bandgap emission at 1.85 eV. Here, defects induced by the radiation trap the excitons and cause them to be redshifted from the main direct band emission. After annealing, the defect-induced sideband disappears, but the indirect band emission remains suppressed, indicating a permanent transition into a direct bandgap material. While suspended 2-, 3-, and 4-layer MoS 2 show no change in the intensity of the direct band emission after radiation exposure, substrate-supported MoS 2 exhibits an approximately 2-fold increase in the direct bandgap emission after irradiation. Suspended monolayer MoS 2 shows a 2–3× drop in PL intensity; however, substrate-supported monolayer MoS 2 shows a 2-fold increase in the direct band emission.

36 MATERIALS SCIENCE↗

Measuring nanoscale thermal gradients in suspended MoS2 with STEM-EELS

Transition metal dichalcogenides such as molybdenum disulfide (MoS2) may see service in the heart of next-generation nanoelectronic devices, where highly localized power dissipation can produce nontrivial temperature gradients over nanometer-scale distances. Here, we demonstrate that MoS2 is a promising target for plasmon energy expansion thermometry (PEET), a high-spatial resolution temperature mapping technique employed in a scanning transmission electron microscope (STEM) equipped with electron energy loss spectroscopy (EELS). We first use a calibrated, commercial MEMS-style TEM sample heater chip to measure the temperature dependence of the MoS2 bulk plasmon. We corroborate the chip's temperature calibration with Raman thermometry and determine the bulk thermal expansion coefficient (TEC) of MoS2 in the temperature range of 300–1100 K. Applying this TEC value to PEET measurements on a suspended MoS2 flake, we map 70–90 K/μm temperature gradients with a submicrometer spatial resolution.

Shen, Lang (ORCID:0000000297554821)↗

MoS 2 for beyond lithium-ion batteries

As a typical transition-metal chalcogenide material, molybdenum disulfide (MoS 2 ) has received tremendous attention because of its unique layered structure and versatile chemical, electronic, and optical properties. With the focus of this Perspective on the energy storage area, one of the most important contributions of MoS 2 is that it sparked the birth of the rechargeable lithium battery in the early 1980s, which later formed the foundation of commercial lithium batteries. After four decades, admitting that MoS 2 is still playing a significant role in the lithium-ion battery field and considerable effort was made to decipher the mechanism through ex situ and in situ studies and by means of MoS 2 nanostructure engineering that advances the lithium battery performance, it is also used in beyond lithium-ion batteries, such as sodium, magnesium, calcium, and aluminum energy storage systems. Such alternative battery systems are desirable because of the safety concerns of lithium and the depletion of lithium reserves and corresponding increase in cost. In this Perspective, recent development on the fabrication of novel MoS 2 nanostructures was discussed, followed by the scrutinization of their application in beyond lithium-ion batteries and the in situ/operando methods involved in these studies. Finally, a brief summary and outlook that may help with the future advancement of the beyond lithium-ion batteries are presented.

25 ENERGY STORAGE↗

Charge-transfer-enhanced d – d emission in antiferromagnetic NiPS3

The d electron plays a significant role in determining and controlling the properties of magnetic materials. However, the d electron transitions, especially d–d emission, have rarely been observed in magnetic materials due to the forbidden selection rules. Here, we report an observation of d–d emission in antiferromagnetic nickel phosphorus trisulfides (NiPS3) and its strong enhancement by stacking it with monolayer tungsten disulfide (WS2). We attribute the observation of the strong d–d emission enhancement to the charge transfer between NiPS3 and WS2 in the type-I heterostructure. The d–d emission peak splits into two peaks, D1 and D2, at low temperature below 150 K, from where an energy splitting due to the trigonal crystal field is measured as 105 meV. Moreover, we find that the d–d emissions in NiPS3 are nonpolarized lights, showing no dependence on the zigzag antiferromagnetic configuration. These results reveal rich fundamental information on the electronic and optical properties of emerging van der Waals antiferromagnetic NiPS3.

Physics↗