Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

A novel alkaloid, evodiamine causes nuclear localization of cytochrome-c and induces apoptosis independent of p53 in human lung cancer cells

Lung cancer is the most frequently diagnosed malignancy that contributes to high proportion of deaths globally among patients who die due to cancer. Chemotherapy remains the common mode of treatment for lung cancer patients though with limited success. We assessed the biological effects and associated molecular changes of evodiamine, a plant alkaloid, on human lung cancer A549 and H1299 cells along with other epithelial cancer and normal lung SAEC cells. Our data showed that 20–40 μM evodiamine treatment for 24–48 h strongly (up to 73%, P < 0.001) reduced the growth and survival of these cancer cells. However, it also moderately inhibited growth and survival of SAEC cells. A strong inhibition (P < 0.001) was observed on clonogenicity of A549 cells. Further, evodiamine increased (4-fold) mitochondrial membrane depolarization with 6-fold increase in apoptosis and a slight increase in Bax/Bcl-2 ratio. It increased the cytochrome-c release from mitochondria into the cytosol as well as nucleus. Cytosolic cytochrome-c activated cascade of caspase-9 and caspase-3 intrinsic pathway, however, DR5 and caspase-8 extrinsic pathway was also activated which could be due to nuclear cytochrome-c. Pan-caspase inhibitor (z-VAD.fmk) partially reversed evodiamine induced apoptosis. An increase in p53 as well as its serine 15 phosphorylation was also observed. Pifithrin-α, a p53 inhibitor, slightly inhibited growth of A549 cells and under p53 inhibitory condition evodiamine-induced apoptosis could not be reversed. Together these findings suggest that evodiamine is a strong inducer of apoptosis in lung epithelial cancer cells independent of their p53 status and that could involve both intrinsic as well as extrinsic pathway of apoptosis. Thus evodiamine could be a potential anticancer agent against lung cancer. - Highlights: • Evodiamine, a novel plant alkaloid, relatively selectively inhibited growth and survival of human lung cancer cells. • Increased cancer cell apoptosis involving mitochondrial membrane depolarization. • Increased the cytochrome-c release from mitochondria into the cytosol as well as nucleus. • DR5 and caspase-8 extrinsic pathway was also activated in p53-independent manner. • Thus evodiamine could be a potential anticancer agent against lung cancer.

60 APPLIED LIFE SCIENCES↗

Programmed cell clearance: From nematodes to humans

Programmed cell clearance is a highly regulated physiological process of elimination of dying cells that occurs rapidly and efficiently in healthy organisms. It thus ensures proper development as well as homeostasis. Recent studies have disclosed a considerable degree of conservation of cell clearance pathways between nematodes and higher organisms. The externalization of the anionic phospholipid phosphatidylserine (PS) has emerged as an important “eat-me” signal for phagocytes and its exposition on apoptotic cells is controlled by phospholipid translocases and scramblases. However, there is mounting evidence that PS exposure occurs not only in apoptosis, but may also be actively expressed on the surface of cells undergoing other forms of cell death including necrosis; PS is also expressed on the surface of engulfing cells. Additionally, PS may act as a “save-me” signal during axonal regeneration. Here we discuss mechanisms of PS exposure and its recognition by phagocytes as well as the consequences of PS signaling in nematodes and in mammals. - Highlights: • Cell clearance pathways are conserved between nematodes and mammals. • Phosphatidylserine (PS) externalization is a common signal for cell clearance. • Translocases and scramblases are involved in PS exposure during apoptosis. • PS also functions as a “save-me” signal to mediate the fusion of injured axons. • Definitions of cell death should take into account whether/how cells are cleared.

60 APPLIED LIFE SCIENCES↗

Cooperation of Rho family proteins Rac1 and Cdc42 in cartilage development and calcified tissue formation

Highlights: • Generation of Rac1 and Cdc42 double conditional knockout mice in cartilage. • Phenotypes of both deletions in cartilage were severer than those of single deletion. • Rac1 and Cdc42 play cooperating roles in regulation of cartilage and bone formation. Rac1 and Cdc42, Rho family low molecular weight G proteins, are intracellular signaling factors that transmit various information from outside to inside cells. Primarily, they are known to control various biological activities mediated by actin cytoskeleton reorganization, such as cell proliferation, differentiation, and apoptosis. In order to investigate the functions of Rac1 and Cdc42 in bone formation, we prepared cartilage-specific double conditional knockout mice, Rac1{sup fl/fl}; Cdc42{sup fl/fl}; Col2-Cre (Rac1: Cdc42 dcKO mice), which died just after birth, similar to Cdc42{sup fl/fl}; Col2-Cre mice (Cdc42 cKO mice). Our findings showed that the long tubule bone in Rac1: Cdc42 dcKO mice was shorter than that in Rac1{sup fl/fl}; Col2-Cre mice (Rac1 cKO mice) and Cdc42 cKO mice. Abnormal skeleton formation was also observed and disordered columnar formation in the growth plate of the Rac1: Cdc42 dcKO mice was more severe as compared to the Rac1 cKO and Cdc42 cKO mice. Together, these results suggest that Rac1 and Cdc42 have cooperating roles in regulation of bone development.

60 APPLIED LIFE SCIENCES↗

Exosomes derived from breast cancer lung metastasis subpopulations promote tumor self-seeding

Highlights: • Tumor self-seeding is common in breast cancer. • Exosomes derived from MDA231-LM2 cells potentiate the growth of recipient tumors. • Exosomes derived from MDA231-LM2 cells favor the self-seeding of donor tumor cells. Lung metastasis is a primary obstacle in the clinical treatment of metastatic breast cancer. Most patients with lung metastasis eventually die of recurrence. Recurrence may be related to self-seeding, which occurs when circulating tumor cells re-seed into the tumors they originated from (metastasis or carcinoma in situ). Tumor-derived exosomes have been intensively revealed to promote the progression of various cancers. However, whether tumor-derived exosomes play roles in tumor self-seeding has not yet been identified. By establishing a self-seeding nude mouse model, we found that exosomes derived from MDA231-LM2 cells (subpopulations of breast cancer lung metastasis) potentiate the growth of MDA-MB-231 xenografts. More importantly, laser confocal microscopy and flow cytometry results identified that MDA231-LM2-secreted exosomes promote the seeding of MDA231-LM2 cells into MDA-MB-231 xenografts. These findings suggest MDA231-LM2-secreted exosomes as a promising target to treat breast cancer lung metastasis.

60 APPLIED LIFE SCIENCES↗

High expression of fibroblast growth factor-21 in liposarcoma patients indicated better prognosis and less recurrence

Liposarcoma is the most common soft tissue malignancy. We investigated the relationship between the expression of fibroblast growth factor −21 protein and recurrence in the liposarcoma tissues from 40 patients. The patients were divided into two groups (low/no- and high-expressing) for further survival analysis according to fibroblast growth factor −21 expression in their tumor tissue. Immunohistochemical staining showed that fibroblast growth factor −21 protein was located in the cytoplasm. The fibroblast growth factor −21 protein was significantly less expressed in liposarcoma than in normal tissue (p < 0.05). Fibroblast growth factor −21 protein expression was related to gender, but not age, cell differentiation or tumor size. The patients in the low/no fibroblast growth factor 21 expression group were more likely to relapse and die in a shorter period of time. The patients in the high-expression group had a better prognosis and less recurrence. fibroblast growth factor −21 has the potential to act both as a biomarker for liposarcoma prognosis as well as a marker for the response to therapy.

60 APPLIED LIFE SCIENCES↗

Avian communities are decreasing with piñon pine mortality in the southwest

An increase in tree mortality is expected to occur worldwide due to climate-induced drought and increasing temperatures. The 2000–2002 drought in the southwestern United States was one of the most severe in the last 50 years. It led to a severe outbreak of bark beetles that resulted in high mortality of piñon pine ( Pinus edulis ) trees on the Pajarito Plateau in Northern New Mexico beginning in 2002. Many areas in piñon-juniper habitat had entire stands of piñon die leaving only juniper ( Juniperus spp.). Point count surveys were used to determine avian responses to tree mortality from 2003 to 2013. We also tested whether birds responded differently in sites that were mechanically thinned in 2002 and 2003 on Los Alamos National Laboratory property compared to sites not thinned. Junipers and dead piñon pines due to bark beetles and drought were removed on thinned sites. Richness, diversity, and abundance steadily declined after 2003. There was a 73% decrease in abundance and a 45% decrease in richness from 2003 to 2013. There was no difference in community composition between thinned and unthinned sites. Bird abundance and species richness declined faster in thinned sites than unthinned sites, but diversity decreased similarly in both treatments. Several species disappeared over time and some declined substantially. Finally, our results suggest a delay in bird responses to tree mortality on the Pajarito Plateau. Piñon mortality may be a significant threat to bird communities in the southwestern U.S., and tree thinning to control fire may be an added risk.

60 APPLIED LIFE SCIENCES↗

Nexus of thermal resilience and energy efficiency in buildings: A case study of a nursing home

Extreme weather events become more frequent and severe due to climate change. Although energy efficiency technologies can influence thermal resilience of buildings, they are traditionally studied separately, and their interconnections are rarely quantified. This study developed a methodology of modeling and analysis to provide insights into the nexus of thermal resilience and energy efficiency of buildings. In this work, we conducted a case study of a real nursing home in Florida, where 12 patients died during Hurricane Irma in 2017 due to HVAC system power loss, to understand and quantify how passive and active energy efficiency measures (EEMs) can improve thermal resilience to reduce heat-exposure risk of patients. Results show that passive measures of opening windows and doors for natural ventilation, as well as miscellaneous load reduction, are very effective in eliminating the extreme dangerous occasions. However, to maintain safe conditions, active measures such as on-site power generators and thermal storage are also needed. The nursing home was further studied by changing its location to two other cities: San Francisco (mild climate) and Chicago (cold winter and hot summer). Results revealed that the EEMs' impacts on thermal resilience vary significantly by climate and building characteristics. The study also estimated the costs of EEMs to help stakeholders prioritize the measures. Passive measures that may not save energy may greatly improve thermal resilience, and thus should be considered in building design or retrofit. Findings from this study indicate energy efficiency technologies should be evaluated not only by their energy savings performance but also by their influence on a building's resilience to extreme weather events.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Protorheology in practice: Avoiding misinterpretation

Protorheology is the paradigm that any observed flow or deformation is a chance to infer quantitative rheological properties. While this creates many opportunities for insight, there is significant risk of misunderstanding the physics involved, e.g. misinterpreting a liquid as a solid or mistaking viscous flow time as viscoelastic relaxation time. We describe these and other potential mistakes, use case studies to show how serious the problems can be, and contrast misinterpretations with correct approaches and interpretations. Some issues are especially important with materials involving colloidal particles and flows involving surface tension. Whether the reader is making inference from a tilted vial, time-lapse gravity-driven flow, a bounce test, die swell, or any other protorheology observation, the examples here serve as a guide for avoiding bad data in protorheology.

42 ENGINEERING↗

Application of electrospinning for the fabrication of proton-exchange membrane fuel cell electrodes

We report electrospun materials have been gaining great interest in the energy sector. Their tunability and robustness make them highly attractive, particularly for proton-exchange membrane fuel cell (PEMFC) electrodes. Conventional PEMFC electrodes, prepared by either spraying, painting, or slot-die coating, have not yet met the needs of large-scale PEMFC use. Electrospinning of fibrous materials has already shown great promise as an alternative methodology for electrode fabrication. Electrospinning has been used in fuel cell electrodes through two primary means: (1) segmented carbon or inorganic fibers to serve as precious metal catalyst support, and (2) high aspect ratio polymer/particle fibers to serve directly as the electrode. The use of electrospun fibrous electrodes has led to improved PEMFC durability and increased power output at low catalyst loadings, both of which are of paramount importance to large-scale commercialization of PEMFC electric vehicles.

36 MATERIALS SCIENCE↗

Dedication to James A. Miller

This special memorial issue pays tribute to James (Jim) A. Miller, a giant of combustion science who died in 2021, with a celebration of his enormous influence on the field. We were touched by the responses we received after we sent out the invitations for it. Jim inspired several generations of scientists, who viewed him as a mentor, a father figure, and a friend. Together with Nils Hansen and Peter Glarborg, we have written a detailed account on his life and work. Furthermore, it appeared in this journal shortly after his death; and so here we focus on the scientific areas he had interest in and influence on, and how they relate to the 34 papers in this issue. The topics of these papers span a variety of Jim's interests including nitrogen chemistry, polycyclic aromatic hydrocarbon (PAH) chemistry, oxidation chemistry, energy transfer, prompt dissociations, and codes to facilitate combustion chemistry simulations.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Predicting Tensile Stretchability of Trimmed AA6111-T4 Sheets

An integrated manufacturing process simulation framework has been developed to predict the trimmed edge tensile stretchability of AA6111-T4 sheets by incorporating the burr geometry, damage, and plastic strain from trimming simulations into subsequent tensile stretchability simulations. The influence of the trimming die clearances on the predicted tensile stretching ductility (stretchability) is studied and quantitatively compared with experimental measurements. Stretchability is found to decrease with increasing cutting clearances, and simulation results have successfully captured experimentally observed edge crack initiation and failure mode variations for different trimming clearances. Subsequent computational sensitivity studies reveal that while deburring of previously trimmed edges has little influence on tensile stretchability, removal of trimmed edge initial plastic strain may significantly enhance the subsequent trimmed edge stretchability.

Aluminum alloys↗

Elastic knowledge base of bcc Ti alloys from first-principles calculations and CALPHAD-based modeling

Here, titanium alloys are being investigated as suitable materials for load-bearing implants because of their biocompatibility and mechanical properties. Stress shielding, a common issue with the current load-bearing implant materials, occurs due to a Young’s modulus (E) mismatch between bone (~10–40 GPa) and implants (such as Ti-6Al-4V ~ 110 GPa), which leads to bone dying around the implant and ultimately implant failure. Reducing the Young’s modulus of Ti alloys may overcome the issues of stress shielding and improve implant materials. In the present work, first-principles calculations have been used to predict the single crystal elastic stiffness coefficients (c ij ’s) for the Ti-containing ternary alloys Ti-X-Y(X ≠ Y = Mo, Nb, Sn, Ta, Zr) in the bcc lattice. It is found that the ternary Ti-X-Y (X ≠ Y = Mo, Nb, Ta) alloys behave similarly; so do the ternary Ti-X-Sn (X = Mo, Nb, Ta) alloys and the Ti-X-Zr (X = Mo, Nb, Ta) alloys. This is expected due to the similarity between the Mo, Nb and Ta elements. The results also show that the Ti-Zr-X alloys stabilized the bcc phase at lower alloying concentrations. The polycrystalline aggregate properties are also estimated from the c ij ’s, including bulk modulus, shear modulus and Young’s modulus. The results show that Ti-alloys with compositions close to the bcc stability limit have the lowest E. In combination with previous predictions, a complete elastic database has been established using theCALPHAD (CALculation of PHAse Diagram) based modeling approach. The database results are compared with the E of higher order Ti alloys and shown to be able to predict the E accurately. This complete data-base forms a foundation to tailor Ti alloys for desired elastic properties.

36 MATERIALS SCIENCE↗

Recent and future developments in pultrusion technology with consideration for curved geometries: A review

Herein this paper examined the current state and future developments in pultrusion with particular emphasis on its application in curved part manufacturing. The relationship between factors such as resin chemistry, fiber characteristics, and die geometry that influences the properties of pultruded product were highlighted. Moreover, the specific challenges associated with pultruding curved parts such as the complexities in achieving uniformity and structural integrity in such geometries were discussed. The review emphasized mold design, process improvement, adaptive control systems for precise resin impregnation and material selection to address these challenges. Additionally, the paper suggests the integration of real-time monitoring and data analytics as ways to enhance quality control during curved parts pultrusion. These advancements will help to overcome challenges specific to curved pultrusion and make the process more efficient. Other manufacturing techniques such as filament winding, thermoforming, pulforming were mentioned as alternatives to curved parts pultrusion. The review also explores pultruded variable curvature processes, highlighting some notable patents and article related to this subject matter. Production of pultruded variable curvature parts was seen as a key driver that can shape the future of pultrusion. Finally, the paper anticipates future trends, with sustainability, customization, integration of advanced materials, and development of techniques for pultrusion of composites parts.

42 ENGINEERING↗

Dry-pressed lithium nickel cobalt manganese oxide (NCM) cathodes enabled by holey graphene host

There is an increasing demand for electric vehicle batteries with higher energy densities that can be manufactured with low cost utilizing environmentally friendly processes. Lithium nickel cobalt manganese oxides (NCM), such as LiNi(0.5)Co(0.2)Mr(0.3)O(2) (NCM523), are commonly used in commercial lithium ion batteries for electric vehicle applications. These cathodes are typically fabricated using environmentally hazardous, energy intensive, and time-consuming solvent-based slurry casting processes. Polymeric binders, also required for cathode preparation, add weight and can undergo parasitic reactions during battery cycling. Here we report a facile, solvent-free, binder-free, and rapid cold-press electrode fabrication process to prepare high mass loading NCM cathodes within minutes. This process is enabled by the use of holey graphene, a unique lightweight, compressible carbon nanomaterial that serves as both a binder and an electrically conductive matrix. NCM cathodes fabricated by this method are stable and exhibit good active material utilization. A significant advantage for the dry-press process is that the electrode mass loadings can be readily increased simply by adding more composite powder to the compression molding die, resulting in improved areal capacities that are attractive for applications requiring high energy per unit footprint. (C) 2020 Elsevier Ltd. All rights reserved.

25 ENERGY STORAGE↗

Successful application of lead isotopes in source apportionment, legal proceedings, remediation and monitoring

In late 2006, the seaside community in Esperance Western Australia was alerted to thousands of native bird species dying. The source of the lead (Pb) was determined by Pb isotopes to derive from the handling of Pb carbonate concentrate through the Port, which began in July 2005. Concern was expressed for the impact of this on the community. Our objectives were to employ Pb isotope ratios to evaluate the source of Pb in environmental samples for use in legal proceedings, and for use in remediation and monitoring. Isotope measurements were undertaken of bird livers, plants, drinking water, soil, harbour sediments, air, bulk ceiling dust, gutter sludge, surface swabs and blood. The unique lead isotopic signature of the contaminating Pb carbonate enabled diagnostic apportionment of lead in samples. Apart from some soil and water samples, the proportion of contaminating Pb was >95% in the environmental samples. Lead isotopes were critical in resolving legal proceedings, are being used in the remediation of premises, were used in monitoring of workers involved in the decontamination of the storage facility, and monitoring transport of the concentrate through another port facility. Air samples show the continued presence of contaminant Pb, more than one year after shipping of concentrate ceased, probably arising from dust resuspension. Brief details of the comprehensive testing and cleanup of the Esperance community are provided along with the role of the Community. Lead isotopic analyses can provide significant benefits to regulatory agencies, interested parties, and the community where the signature is able to be characterised with a high degree of certainty. - Highlights: Black-Right-Pointing-Triangle Lead carbonate concentrate. Black-Right-Pointing-Triangle Successful use of Pb isotopes in identifying sources of Pb arising from transport and shipping. Black-Right-Pointing-Triangle Use of Pb isotopes in legal proceedings and their use in cleanup of residences. Black-Right-Pointing-Triangle Use of Pb isotopes in cleanup of a residual 9000 tonnes of Pb carbonate and in ongoing monitoring.

54 ENVIRONMENTAL SCIENCES↗

Organochlorine concentrations in adipose tissue and survival in postmenopausal, Danish breast cancer patients

Highlights: • Few studies have explored organochlorine concentrations and breast cancer mortality. • We did so in a survivor-cohort of 399 postmenopausal women, of whom 177 died. • PCBs and several organochlorine pesticides may be inversely associated with breast cancer mortality. • This association was confined to women with adverse prognostic factors. • Dieldrin was associated with a higher mortality, regardless of prognostic factors. Several studies have investigated an association between organochlorine-concentrations and breast cancer incidence, whereas few have investigated an association with breast cancer mortality.

54 ENVIRONMENTAL SCIENCES↗

Alzheimer's disease and alpha-synuclein pathology in the olfactory bulbs of infants, children, teens and adults ≤ 40 years in Metropolitan Mexico City. APOE4 carriers at higher risk of suicide accelerate their olfactory bulb pathology

Highlights: • Air pollution targets olfactory bulbs in young city dwellers. • Olfactory bulb hyperphosphorylated tau and Lewy neurites are present in Mexico City toddlers. • APOE4 carriers accelerate their OB pathology and have 4.7 times higher suicide odds v APOE3. • Olfactory testing may aid in identifying young persons at high risk for neurodegenerative disease. • Early neuroprotective interventions in PM{sub 2.5} and CDNP's exposed individuals ≤ 20 years are critical. There is growing evidence that air pollution is a risk factor for a number of neurodegenerative diseases, most notably Alzheimer's (AD) and Parkinson's (PD). It is generally assumed that the pathology of these diseases arises only later in life and commonly begins within olfactory eloquent pathways prior to the onset of the classical clinical symptoms. The present study demonstrates that chronic exposure to high levels of air pollution results in AD- and PD-related pathology within the olfactory bulbs of children and relatively young adults ages 11 months to 40 years. The olfactory bulbs (OBs) of 179 residents of highly polluted Metropolitan Mexico City (MMC) were evaluated for AD- and alpha-synuclein-related pathology. Even in toddlers, hyperphosphorylated tau (hTau) and Lewy neurites (LN) were identified in the OBs. By the second decade, 84% of the bulbs exhibited hTau (48/57), 68% LNs and vascular amyloid (39/57) and 36% (21/57) diffuse amyloid plaques. OB active endothelial phagocytosis of red blood cell fragments containing combustion-derived nanoparticles (CDNPs) and the neurovascular unit damage were associated with myelinated and unmyelinated axonal damage. OB hTau neurites were associated mostly with pretangle stages 1a and 1b in subjects ≤ 20 years of age, strongly suggesting olfactory deficits could potentially be an early guide of AD pretangle subcortical and cortical hTau. APOE4 versus APOE3 carriers were 6–13 times more likely to exhibit OB vascular amyloid, neuronal amyloid accumulation, alpha-synuclein aggregates, hTau neurofibrillary tangles, and neurites. Remarkably, APOE4 carriers were 4.57 times more likely than non-carriers to die by suicide. The present findings, along with previous data that over a third of clinically healthy MMC teens and young adults exhibit low scores on an odor identification test, support the concept that olfactory testing may aid in identifying young people at high risk for neurodegenerative diseases. Moreover, results strongly support early neuroprotective interventions in fine particulate matter (PM{sub 2.5}) and CDNP's exposed individuals ≤ 20 years of age, and the critical need for air pollution control.

54 ENVIRONMENTAL SCIENCES↗

Comprehensive evaluation of commercially scalable atomic-layer-deposited alumina coating impact on full cell battery performance across varied test conditions

Atomic Layer Deposition (ALD) has emerged as a strategic enhancement method for lithium-ion battery (LIB) materials offering potential benefits and durability benefits for industrial battery production. However, the translation from laboratory achievements to commercial-scale applications has been limited. Here, this study aims to bridge this gap by comprehensively evaluating the effects of commercially scalable Al 2 O 3 ALD coatings using full pouch cell performance as a means to assess the ALD impact. We utilized large-scale slot-die coating techniques to ensure consistent electrode quality and tested four configurations of pouch cells to analyze the individual effects of ALD coating on anode and cathode electroactive materials. Our extensive testing matrix included long-term cycling, fast discharge, fast charge, leakage current, and high voltage tests. While at lower C-rates (<~1C), the influence of Al 2 O 3 coatings on cell performance is not significant. Fast charging conditions reveal that the anode ALD coating significantly enhances performance via a passivating effect, while on the cathode, it is detrimental, potentially due to increased resistance of the thin interfacial layer formed during the ALD processing. Leakage current and high-voltage tests show that the application of ALD coatings on either anode or cathode effectively minimizes side reactions at the electrode-electrolyte interface. Additionally, ALD coatings significantly mitigate concentrated and localized lithium plating on the anodes. These insights provide a valuable understanding of the potential of ALD technologies in LIB manufacturing to tailor cell performance, paving the way for safer, more efficient, and cost-effective battery solutions.

25 ENERGY STORAGE↗