Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Collective modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Modified Adaptive Control for Region 3 Operation in the Presence of Wind Turbine Structural Modes

Many challenges exist for the operation of wind turbines in an efficient manner that is reliable and avoids component fatigue and failure. Turbines operate in highly turbulent environments resulting in aerodynamic loads that can easily excite turbine structural modes, possibly causing component fatigue and failure. Wind turbine manufacturers are highly motivated to reduce component fatigue and failure that can lead to loss of revenue due to turbine down time and maintenance costs. The trend in wind turbine design is toward larger, more flexible turbines that are ideally suited to adaptive control methods due to the complexity and expense required to create accurate models of their dynamic characteristics. In this paper, we design an adaptive collective pitch controller for a high-fidelity simulation of a utility-scale, variable-speed horizontal axis wind turbine operating in Region 3. The objective of the adaptive pitch controller is to regulate generator speed, accommodate wind gusts, and reduce the excitation of structural modes in the wind turbine. The control objective is accomplished by collectively pitching the turbine blades. The adaptive collective pitch controller for Region 3 was compared in simulations with a baseline classical Proportional Integrator (PI) collective pitch controller. The adaptive controller will demonstrate the ability to regulate generator speed in Region 3, while accommodating gusts, and reducing the excitation of certain structural modes in the wind turbine.

Frost, Susan Alane↗

Active, Programmable Elastomeric Surfaces with Tunable Adhesion for Deterministic Assembly by Transfer Printing

Active, programmable control of interfacial adhesion is an important, desired feature of many existing and envisioned systems, including medical tapes, releasable joints, and stamps for transfer printing. Here a design for an elastomeric surface that offers switchable adhesion strength through a combination of peel-rate dependent effects and actuation of sub-surface fluid chambers is presented. Microchannels and open reservoirs positioned under a thin surface membrane can be pressurized in a controlled manner to induce various levels of surface deformation via inflation. These pressurized structures demonstrate utility in controllably decreasing the strength of adhesion of flat, solid objects to the elastomeric surface, particularly in the limit of low peel-rates. Experimental and theoretical studies of these systems reveal the key mechanisms, and guide optimized geometries for broad control over adhesion, in a programmable and reversible manner. Implementing these concepts in stamps for transfer printing enables new modes for deterministic assembly of micro- and nanoscale materials onto diverse types of substrates. Furthermore, collections of silicon plates delivered onto plastic, paper and other surfaces with single or multiply addressable stamps illustrate some of the capabilities.

36 MATERIALS SCIENCE↗

Searches for 25 rare and forbidden decays of D + and ${D}_s^{+}$ mesons

A search is performed for rare and forbidden charm decays of the form ${D}_{(s)}^{+}\to {h}^{\pm }{\mathrm{\ell}}^{+}{\mathrm{\ell}}^{\left(\prime \right)\mp } $, where h ± is a pion or kaon and ℓ (')± is an electron or muon. The measurements are performed using proton-proton collision data, corresponding to an integrated luminosity of 1.6 fb –1 , collected by the LHCb experiment in 2016. No evidence is observed for the 25 decay modes that are investigated and 90 % confidence level limits on the branching fractions are set between 1.4 × 10 –8 and 6.4 × 10 –6 . In most cases, these results represent an improvement on existing limits by one to two orders of magnitude.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the pp → W ± γγ and pp → Zγγ cross sections at $ \sqrt{\mathrm{s}} $ = 13 TeV and limits on anomalous quartic gauge couplings

The cross section for W or Z boson production in association with two photons is measured in proton-proton collisions at a centre-of-mass energy of 13 TeV. The data set corresponds to an integrated luminosity of 137 fb -1 collected by the CMS experiment at the LHC. The W → ℓν and Z → ℓℓ decay modes (where ℓ = e, μ) are used to extract the Wγγ and Zγγ cross sections in a phase space defined by electron (muon) with transverse momentum larger than 30 GeV and photon transverse momentum larger than 20 GeV. All leptons and photons are required to have absolute pseudorapidity smaller than 2.5. The measured cross sections in this phase space are σ(Wγγ) = ${13.6}_{-1.9}^{+1.9}{\left(\mathrm{stat}\right)}_{-4.0}^{+4.0}$ (syst) ± 0.08 (PDF + scale) fb and σ(Zγγ) = ${5.41}_{-0.55}^{+0.58}{\left(\mathrm{stat}\right)}_{-.070}^{+0.64}$(syst) ± 0.06 (PDF + scale) fb. Limits on anomalous quartic gauge couplings are set in the framework of an effective field theory with dimension-8 operators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermal radiation in systems of many dipoles

Systems of many nanoparticles or volume-discretized bodies exhibit collective radiative properties that could be used for enhanced, guided, or tunable thermal radiation. These are commonly treated as assemblies of point dipoles with interactions described by Maxwell's equations and thermal fluctuations correlated by the fluctuation-dissipation theorem. Here, we demonstrate the equivalence of different theories for these systems and provide a complete derivation of many-dipole thermal radiation, showing that the correct use of the fluctuation-dissipation theorem depends on the definitions of fluctuating and induced dipole moments. We formulate a method to calculate the diffusive radiative thermal conductivity of arbitrary collections of nanoparticles; this allows the comparison of thermal radiation to other heat-transfer modes and across different material systems. We calculate the radiative thermal conductivity of ordered and disordered arrays of SiC and SiO 2 nanoparticles and show that thermal radiation can significantly contribute to thermal transport in these systems, because packed nanoparticles have low phonon thermal conductivity. Finally, we demonstrate that the radiative heat transfer strongly depends on the materials and geometrical arrangement of the nanoparticle array, and we verify our calculations by comparison to the exact solution for a one-dimensional particle chain.

42 ENGINEERING↗

Observation of the Ξ b − → ψ ( 2 S ) Ξ − decay and studies of the Ξ b ( 5945 ) 0 baryon in proton-proton collisions at s = 13 TeV

The first observation of the decay Ξ b − → ψ ( 2 S ) Ξ − and measurement of the branching ratio of Ξ b − → ψ ( 2 S ) Ξ − to Ξ b − → J / ψ Ξ − are presented. The J / ψ and ψ ( 2 S ) mesons are reconstructed using their dimuon decay modes. The results are based on proton-proton colliding beam data from the LHC collected by the CMS experiment at s = 13 TeV in 2016–2018, corresponding to an integrated luminosity of 140 fb − 1 . The branching fraction ratio is measured to be B ( Ξ b − → ψ ( 2 S ) Ξ − ) / B ( Ξ b − → J / ψ Ξ − ) = 0.8 4 − 0.19 + 0.21 ( stat ) ± 0.10 ( syst ) ± 0.02 ( B ) , where the last uncertainty comes from the uncertainties in the branching fractions of the charmonium states. New measurements of the Ξ b ( 5945 ) 0 baryon mass and natural width are also presented, using the Ξ b − π + final state, where the Ξ b − baryon is reconstructed through the decays J / ψ Ξ − , ψ ( 2 S ) Ξ − , J / ψ Λ K − , and J / ψ Σ 0 K − . Finally, the fraction of Ξ b − baryons produced from Ξ b ( 5945 ) 0 decays is determined. © 2024 CERN, for the CMS Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Performance and Health Test Procedure for Grid Energy Storage Systems

A test procedure to evaluate the performance and health of field installations of grid-connected battery energy storage systems (BESS) is described. Performance and health metrics captured in the procedures are: round-trip efficiency, standby losses, response time/accuracy, and useable energy/state of charge at different discharge/charge rates over the system's lifetime. The procedures are divided into reference performance tests, which require the system to be put in a test mode and are to be conducted in intervals, and real-time monitoring tests, which collect data during normal operation without interruption. The procedures can be applied on a wide array of BESS with little modification and can thus support BESS operators in the management of BESS field installations with minimal interruption and expenditure. Simulated results based on a detailed system simulation of a prototype system are provided as guideline.

25 ENERGY STORAGE↗

Ultrasonic Fiber Waveguides for Measuring Spatially Distributed Environmental and Material Properties

We report using carbon fibers (<100 μm in diameter) as ultrasonic waveguides to measure spatial changes in the environment and material properties. We connected carbon fibers of different lengths to an ultrasonic transducer and measured changes in the times of flight in a pulse-echo mode in response to elevated temperatures. By simultaneously interrogating multiple fibers of different lengths and collectively analyzing the time of flight in each fiber, we demonstrated dynamic measurements of the temperature distribution along the fiber bundle during their heating.

Walton, Kenneth↗

Coherent light control of a metastable hidden state

Metastable phases present a promising route to expand the functionality of complex materials. Of particular interest are light-induced metastable phases that are inaccessible under equilibrium conditions, as they often host new, emergent properties switchable on ultrafast timescales. However, the processes governing the trajectories to such hidden phases remain largely unexplored. Here, using time- and angle-resolved photoemission spectroscopy, we investigate the ultrafast dynamics of the formation of a hidden quantum state in the layered dichalcogenide 1T-TaS 2 upon photoexcitation. Our results reveal the nonthermal character of the transition governed by a collective charge-density-wave excitation. Using a double-pulse excitation of the structural mode, we show vibrational coherent control of the phase-transition efficiency. Our demonstration of exceptional control, switching speed, and stability of the hidden state are key for device applications at the nexus of electronics and photonics.

36 MATERIALS SCIENCE↗

Measurements of Higgs bosons decaying to bottom quarks from vector boson fusion production with the ATLAS experiment at $\sqrt{s}=13\,\text {TeV}$

The paper presents a measurement of the Standard Model Higgs Boson decaying to b-quark pairs in the vector boson fusion (VBF) production mode. A sample corresponding to 126 fb –1 of √s = 13TeV proton–proton collision data, collected with the ATLAS experiment at the Large Hadron Collider, is analyzed utilizing an adversarial neural network for event classification. The signal strength, defined as the ratio of the measured signal yield to that predicted by the Standard Model for VBF Higgs production, is measured to be $0.95$ $^{+0.38}_{–0.36}$, corresponding to an observed (expected) significance of 2.6 (2.8) standard deviations from the background only hypothesis. The results are additionally combined with an analysis of Higgs bosons decaying to b-quarks, produced via VBF in association with a photon.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

2019 and 2022 Twin Cities Travel Behavior Inventory Surveys

# 2019 and 2022 Twin Cities Travel Behavior Inventory Surveys To help local and regional planning agencies understand shifting demographics and travel patterns, surveys were conducted in Minnesota’s greater Twin Cities region in 2019 and 2022. Survey results aided the Metropolitan Council in proposing practical transportation investments, preparing competitive grant applications, and prioritizing improvements to best fit regional needs. ## Data Collection Agency RSG conducted the surveys for the Metropolitan Council. ## Survey Methodology These mixed-mode surveys focused on bus, rail, car, micromobility, ride-hailing, and walking. Designed as household travel surveys, they were carried out in English, Spanish, Karen, Oromo, Somali, and Hmong during two timeframes: Oct. 1, 2018—Sept. 30, 2019 and June 22, 2021—Feb. 5, 2022. Participants accessed the surveys using a smartphone-based app, website, or call center. A questionnaire captured data about demographics, daily travel activities, and typical transportation patterns to inform model updates and gain information about emerging behavioral changes such as electric vehicle adoption and teleworking frequency. It also addressed the impacts of COVID-19 on participants’ typical travel behavior. ## Survey Records, Data, and Documentation Survey records include a total of 31,251 participants—16,152 participants from 7,837 households during the 2019 survey and 15,099 participants from 7,952 households during the 2022 survey.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗