Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Closure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Milgrom's revision of Newton's laws - Dynamical and cosmological consequences

Milgrom's (1983) recent revision of Newtonian dynamics was introduced to eliminate the inference that large quantities of invisible mass exist in galaxies. It is shown by simple examples that a Milgrom acceleration, in the form presented so far, implies other far-reaching changes in dynamics. The momentum of an isolated system is not conserved, and the usual theorem for center-of-mass motion of any system does not hold. Naive applications require extreme caution. The model fails to provide a complete description of particle dynamics and should be thought of as a revision of Kepler's laws rather than Newton's. The Milgrom acceleration also implies fundamental changes in cosmology. A quasi-Newtonian calculation adapted from Newtonian cosmology suggests that a 'Milgrom universe' will recollapse even if the classical closure parameter Omega is much less than unity. The solution, however, fails to satisfy the cosmological principle. Reasons for the breakdown of this calculation are examined. A new theory of gravitation will be needed before the behavior of a Milgrom universe can be predicted.

Felten, J. E.↗

Analytical model for large-scale turbulence

The paper presents an analytical model for large-scale turbulence, based on a new closure which depends on the growth rate of the instability-generating turbulence. For convection in stars the results of the mixing-length theory are recovered, and for laboratory convection the N = R to the 1/3 power law is recovered. The present model can readily be extended to include magnetic fields and rotation.

Canuto, V. M.↗

An elastic failure model of indentation damage

A mechanistically consistent model for indentation damage based on elastic failure at tensile or shear overloads, is proposed. The model accommodates arbitrary crack orientation, stress relaxation, reduction and recovery of stiffness due to crack opening and closure, and interfacial friction due to backward sliding of closed cracks. This elastic failure model was implemented by an axisymmetric finite element program which was used to simulate progressive damage in a silicon nitride plate indented by a tungsten carbide sphere. The predicted damage patterns and the permanent impression matched those observed experimentally. The validation of this elastic failure model shows that the plastic deformation postulated by others is not necessary to replicate the indentation damage of brittle structural ceramics.

Liaw, B. M.↗

Zero-g experiments with a He II active phase separator for space application

An active phase separator (APS) for temperature control of He II space cooling systems was tested in a zero-g environment during a series of parabolic flights on a NASA KC 135 aircraft. The APS provides for liquid-gas separation and features an annular gap, a downstream heat exchanger and an upstream ball closure. The apparatus was operated during acceleration and floating and in two different heat load situations. The tests confirmed that adequate mass flow rates could be maintained using a vacuum pump to simulate space vacuum and that residual liquid could be evaporated from the heat exchanger after closing a ball valve to seal off flows.

Denner, H. D.↗

The response of turbulent boundary layers to sudden pertubations

The processes present in a turbulent boundary layer (BL) which experiences a sudden change in the surface roughness are discussed in terms of numerical models in comparison with empirical data. Consideration is limited to flow perturbations which preserve the BL approximation. Generalized continuity, momentum and turbulent energy transport equations are reviewed. The perturbed BL has two regions: one with large velocity gradients and an outer zone with smaller gradients. Expressions are defined for the velocity and temperature profiles and the roughness length after a step change in surface roughness, which causes the disturbance. A pertrurbation could also arise from a heat flux input of a pressure gradient. The effects of the shape of the perturbing step and the presence of several disturbing edges are explored. Finally, it is shown that closure forms and constants for self-preserving flows are worthy of further development because of their demonstrable abilities to describe simple perturbed flows.

Smits, A. J.↗

Analysis of turbulent underexpanded jets. II - Shock noise features using SCIPVIS

SCIPVIS, the computational model discussed by Dash et al. (1985), is assessed in predicting the complicated flow structure associated with shock-containing plumes. In addition, the analysis in this study examines this code's applicability as a basic part of a program for estimating broadband shock noise radiation. The results of this study show that excellent agreement exists between predicted and measured static pressure distributions for both underexpanded and overexpanded flow cases considered. Of the three turbulence closure models incorporated in the SCIPVIS code, the kW model of Spalding produces the most uniform agreement with measurement. The k-epsilon-2 model of Launder consistently overestimates plume spreading for supersonic jets with exit Mach numbers in the 1-2 range. Dash's (1983) k-epsilon-2-cc, compressibility-corrected version of Launder's model underestimates plume spreading. Good qualitative agreement was also obtained between the measured longitudinal turbulence intensity and that predicted by the code for the same trial case. Comparison of measured and predicted broadband shock noise spectrum peak values were found to be in excellent agreement. This utilized a variant of the Harper-Bourne and Fisher (1973) phase-array model: the effective shock spacing was reinterpreted as the value of the end of the plume potential core, determined herein by the SCIPVIS code.

Seiner, J. M.↗

On the divergence of the Hall current in the westward traveling surge

Recent observations suggest that the Hall current tends to be highly divergence-free in the westward traveling surge. It is shown in a model calculation that the blockage of the Hall current from closure along field lines leads to a significant reduction of the divergence of the Hall current, but is not divergence-free. The westward electrojet in this models is found to rotate counterclock wise around the leading edge of the surge and merge into the eastward electrojet. The difference in strength between the two electrojets at the head of the surge goes into the upward field-aligned current. It is also shown that the conductivity enhanced by the discrete auroral precipitation does not contribute to the divergence of the Hall current, provided that the electric fields are coplanar along a field line. The above results strongly suggest that the Hall current tends to be highly divergence-free in regions of bright auroral forms, especially in the westward traveling surge.

Kan, J. R.↗

CELSS transportation analysis

The results of a study conducted in order to estimate where potential transportation cost savings can be anticipated by using CELSS technology for selected future manned space missions, are presented. Six manned missions ranging from a low earth orbit mission to those associated with asteroids and a Mars sortie are selected from NASA planning forecasts for study during an analysis of the transportation system. Several environmental control and life-support systems which are used in developing life-support closure scenarios are investigated for estimates of weight, volume, and power requirements. It is shown that when the scenarios are combined with the transportation analysis, mission life-support cost estimates are provided.

Olson, R. L.↗

An evaluation of oxygen/hydrogen propulsion systems for the Space Station

Conceptual designs for O2/H2 chemical and resistojet propulsion systems for the Space Station was developed and evaluated. The evolution of propulsion requirements was considered as the Space Station configuration and its utilization as a space transportation node change over the first decade of operation. The characteristics of candidate O2/H2 auxiliary propulsion systems are determined, and opportunities for integration with the OTV tank farm and the Space Station life support, power and thermal control subsystems are investigated. OTV tank farm boiloff can provide a major portion of the growth station impulse requirements and CO2 from the life support system can be a significant propellant resource, provided it is not denied by closure of that subsystem. Waste heat from the thermal control system is sufficient for many propellant conditioning requirements. It is concluded that the optimum level of subsystem integration must be based on higher level Space Station studies.

Klemetson, R. W.↗

Electrodynamics of the westward traveling surge

It is shown that the global convection pattern, the ionospheric current, and the field-aligned current associated with the westward traveling surge in the asymptotic state can be modeled quantitatively as consequences of a blockage of the Hall current from closure in the magnetosphere via field-aligned currents. The conductivity is allowed to increase self-consistently with increasing upward field-aligned current in the model. This inclusion of the self-consistent enhanced ionospheric conductivity due to discrete auroral precipitations is found to generate a localized intense westward electrojet on the poleward side of the Harang discontinuity. The westward electrojet is also found to rotate counterclockwise, merging into the eastward electrojet around the leading edge of the surge. Thus the major features of the westward traveling surge can be reproduced reasonably well in the model.

Kan, J. R.↗

The collisional dynamics of particulate disks

It is shown that the use of the Krook equation greatly simplifies the discussion of the collisional dynamics of particulate disks. Collisions are assumed to be inelastic from the outset. A simple heuristic argument is used to compute the effective collision rate in a disk of spherical particles with a power-law distribution of sizes. For Saturn's rings, the effective collision rate for momentum transport is substantially lower than that conventionally estimated on the basis of an observed optical depth at visual wavelengths. The closure of the vertically integrated set of moment equations without discarding the third-order moments at the outset is discussed, allowing for the possibility of a bent disk. In the limit that the collision frequency is much larger than the orbit frequency, the usual Navier-Stokes equations of viscous hydrodynamics for a thin disk are recovered with an explicit expression for the shear viscosity. The method is generalized to include the effects of gravitational scattering.

Shu, F. H.↗

Fatigue-Crack-Growth Structural Analysis

Elastic and plastic deformations calculated under variety of loading conditions. Prediction of fatigue-crack-growth lives made with FatigueCrack-Growth Structural Analysis (FASTRAN) computer program. As cyclic loads are applied to initial crack configuration, FASTRAN predicts crack length and other parameters until complete break occurs. Loads are tensile or compressive and of variable or constant amplitude. FASTRAN incorporates linear-elastic fracture mechanics with modifications of load-interaction effects caused by crack closure. FASTRAN considered research tool, because of lengthy calculation times. FASTRAN written in FORTRAN IV for batch execution.

Newman, J. C., Jr.↗

Analysis of Remote Sensing Data

A brief assessment of remote sensing applied to geological studies is given. An analysis of thematic mapping data on oak-hickory forests in southern Missouri is discussed. It was found that there is a control on the infrared reflectance (bands 4, 5, and 7 of the Thematic Mapper (TM) of the forests that correlates with rock and soil types. During the growing season, soils with low water retention capacities correlate with high infrared (band 4, lesser with band 5 and 7) signatures. A metamorphic core complex called the Meatiq located in the Eastern Desert of Egypt was studied. The dome provides exposure of most of the rock units of the Arabian-Nubian Precambrian Shield. The dome bears many resemblances to Cordilleran metamorphic complexes. LANDSAT TM data was used to improve on reconnaissance maps of the dome. The remote sensing data was interpreted in the context of field observations, petrographic, and chemical analysis of rock units in the dome, in order to map similar domes in the Eastern Desert from TM data. Mapping projects such as the one just described will help constrain the geologic evolution of the Arabian-Nubian Shield. Two particular hypotheses that researchers hope to test for the development of the shield are: (1) closure of a proto-Red Sea; and (2) accretion of a primitive island arc system onto the shield.

Guiness, E. A.↗

Advanced turbine study

The feasibility of an advanced convective cooling concept applied to rocket turbine airfoils which operate in a high pressure hydrogen and methane environment was investigated. The concept consists of a central structural member in which grooves are machined. The grooves are temporarily filled with a removable filler and the entire airfoil is covered with a layer of electroformed nickel, or nickel base alloy. After removal of the filler, the low thermal resistance of the nickel closure causes the wall temperature to be reduced by heat transfer to the coolant. The program is divided in the following tasks: (1) turbine performance appraisal; (2) coolant geometry evaluation; (3) test hardware design and analysis; and (4) test airfoil fabrication.

Castro, J. H.↗

Delamination growth in composite materials

The Double Cantilever Beam (DCB) and the End Notched Flexure (ENF) specimens are employed to characterize MODE I and MODE II interlaminar fracture resistance of graphite/epoxy (CYCOM 982) and graphite/PEEK (APC2) composites. Sizing of test specimen geometries to achieve crack growth in the linear elastic regime is presented. Data reduction schemes based upon beam theory are derived for the ENF specimen and include the effects of shear deformation and friction between crack surfaces on compliance, C, and strain energy release rate, G sub II. Finite element (FE) analyses of the ENF geometry including the contact problem with friction are presented to assess the accuracy of beam theory expressions for C and G sub II. Virtual crack closure techniques verify that the ENF specimen is a pure Mode II test. Beam theory expressions are shown to be conservative by 20 to 40 percent for typical unidirectional test specimen geometries. A FE parametric study investigating the influence of delamination length and depth, span, thickness and material properties on G sub II is presented. Mode I and II interlaminar fracture test results are presented. Important experimental parameters are isolated, such as precracking techniques, rate effects, and nonlinear load-deflection response. It is found that subcritical crack growth and inelastic materials behavior, responsible for the observed nonlinearities, are highly rate-dependent phenomena with high rates generally leading to linear elastic response.

Gillespie, J. W., Jr.↗

On the interaction of ultrasound with cracks: Applications to fatigue crack growth

Partial contact of two rough fatigue crack surfaces leads to transmission and diffraction of an acoustic signal at those contacts. Recent experimental and theoretical efforts to understand and quantify such contact in greater detail are discussed. The objective is to develop an understanding of the closure phenomenon and its application to the interpretation of fatigue data, in particular the R-ratio, spike overload/underload and threshold effects on crack propagation.

Buck, O.↗

Effect of liquid droplets on turbulence in a round gaseous jet

The main objective of this investigation is to develop a two-equation turbulence model for dilute vaporizing sprays or in general for dispersed two-phase flows including the effects of phase changes. The model that accounts for the interaction between the two phases is based on rigorously derived equations for turbulence kinetic energy (K) and its dissipation rate epsilon of the carrier phase using the momentum equation of that phase. Closure is achieved by modeling the turbulent correlations, up to third order, in the equations of the mean motion, concentration of the vapor in the carrier phase, and the kinetic energy of turbulence and its dissipation rate for the carrier phase. The governing equations are presented in both the exact and the modeled formes. The governing equations are solved numerically using a finite-difference procedure to test the presented model for the flow of a turbulent axisymmetric gaseous jet laden with either evaporating liquid droplets or solid particles. The predictions include the distribution of the mean velocity, volume fractions of the different phases, concentration of the evaporated material in the carrier phase, turbulence intensity and shear stress of the carrier phase, droplet diameter distribution, and the jet spreading rate. The predictions are in good agreement with the experimental data.

Mostafa, A. A.↗

A monthly forecast experiment: Preliminary report

An experiment on monthly forecasts with eight winter cases is being carried out, using a 1980 general circulation model (GCM), which incorporates a set of dubgrid-scale physics characterized by the Mellon-Yamada turbulence closure (hierarchy level 2.5), the Monin-Obukhov parameterization for the layer next to the ground surface, Manabe's cumulus parameterization, and the soil heat conduction. The sample cases adopted are for the month of January in the years from 1977 to 1983, which include the extraordinarily severe winter of 1977 and the most pronounced E1 Nino year of 1983. Each case is predicted by prescribing the climatologically normal sea surface temperature as the lower boundary conditions and by using an ensemble means of three individual integrations. These integrations start with three different initial conditions based on the Level data generated separately at the Geophysical Fluid Dynamics Laboratory, the National Meteorological Center, and the European Centre for Medium Range Weather Forecasts.

Miyakoda, K.↗