Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COUPLED MODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Coupling of Nondegenerate Topological Modes in Nitrogen Core-Doped Graphene Nanoribbons

Nitrogen core-doping of graphene nanoribbons (GNRs) allows trigonal planar carbon atoms along the backbone of GNRs to be substituted by higher-valency nitrogen atoms. The excess valence electrons are injected into the π-orbital system of the GNR, thereby changing not only its electronic occupation but also its topological properties. We have observed this topological change by synthesizing dilute nitrogen core-doped armchair GNRs with a width of five atoms (N 2 -5-AGNRs). The incorporation of pairs of trigonal planar nitrogen atoms results in the emergence of topological boundary states at the interface between doped and undoped segments of the GNR. These topological boundary states are offset in energy by approximately ΔE = 300 meV relative to the topological end states at the termini of finite 5-AGNRs. Scanning tunneling microscopy (STM) and spectroscopy (STS) reveal that for finite GNRs the two types of topological states can interact through a linear combination of orbitals, resulting in a pair of asymmetric hybridized states. This behavior is captured by an effective Hamiltonian of nondegenerate diatomic molecules, where the analogous interatomic hybridization interaction strength is tuned by the distance between GNR topological modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature, single mode emission from two-section coupled cavity InGaAs/AlGaAs/GaAs quantum cascade laser

Room temperature, single mode, pulsed emission from two-section coupled cavity InGaAs/AlGaAs/GaAs quantum cascade laser fabricated by focused ion beam processing is demonstrated and analyzed. The single mode emission is centered at 1059.4 cm{sup −1} (9.44 μm). A side mode suppression ratio of 43 dB was achieved. The laser exhibits a peak output power of 15 mW per facet at room temperature. The stable, single mode emission is observed within temperature tuning range, exhibiting shift at rate of 0.59 nm/K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unusual magnetic excitations in the weakly ordered spin- 1 2 chain antiferromagnet Sr 2 CuO 3 : Possible evidence for Goldstone magnon coupled with the amplitude mode

We report on an electron spin resonance (ESR) study of a nearly one-dimensional (1D) spin-1/2 chain antiferromagnet, Sr 2 CuO 3 , with extremely weak magnetic ordering. The ESR spectra at T > T N , in the disordered Luttinger-spin-liquid phase, reveal nearly ideal Heisenberg-chain behavior with only a very small, field-independent linewidth, ~1/T. In the ordered state, below T N , we identify field-dependent antiferromagnetic resonance modes, which are well described by pseudo-Goldstone magnons in the model of a collinear biaxial antiferromagnet. Additionally, we observe a major resonant mode with unusual and strongly anisotropic properties, which is not anticipated by the conventional theory of Goldstone spin waves. Lastly, we propose that this unexpected magnetic excitation can be attributed to a field-independent magnon mode renormalized due to its interaction with the high-energy amplitude (Higgs) mode in the regime of weak spontaneous symmetry breaking.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonlinear ion modes in a strongly coupled plasma in the presence of nonthermal ion fluids and polarization force

The nonlinear propagation of ion-acoustic (IA) waves in a strongly coupled plasma system containing Maxwellian electrons and nonthermal ions has been theoretically and numerically investigated. The well-known reductive perturbation technique is used to derive both the Burgers and Korteweg−de Vries (KdV) equations. Their shock and solitary wave solutions have also been numerically analyzed in understanding localized electrostatic disturbances. It has been observed that the basic features (viz. polarity, amplitude, width, etc.) of IA waves are significantly modified by the effect of polarization force and other plasma parameters (e.g., the electron-to-ion number density ratio and ion-to-electron temperature ratio). This is a unique finding among all theoretical investigations made before, whose probable implications are discussed in this investigation. The implications of the results obtained from this investigation may be useful in understanding the wave propagation in both space and laboratory plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic transmission control based on all-dielectric Huygens metasurfaces

Tunable metasurfaces open new doors for achieving dynamic wavefront manipulation in an ultracompact footprint. Dielectric metasurfaces are particularly attractive for this application due to their low-loss modes. However, their volumetric modes make them difficult to dynamically tune compared to plasmonic variants with strong field confinement. We overcome this challenge by combining dielectric resonators with an epsilon-near-zero (ENZ) mode in a thin film. By tuning the coupling between modes in the resonators and the ENZ thin film, active control over the transmittance amplitude is achieved. Operating at the wavelength of the Huygens mode, we demonstrate transmittance modulation with an on-state transmittance of 70% and a modulation depth of 31%. In addition, we create a tunable diffraction grating and demonstrate its potential use in beam steering applications. Finally, this approach provides a new avenue for high-speed and low-power modulation of dielectric metasurfaces.

36 MATERIALS SCIENCE↗

White-dwarf variability and the rotation of g-modes

The multiperiodic behavior clearly evident after Fourier analysis of many DA white-dwarf light curves is interpreted as arising from outbursts whose timing is regulated by the rotation and oscillation of the star. A model is proposed on the basis of three main assumptions: (1) a broad array of g-mode oscillations is taking place all the time in DA white-dwarf variables; (2) slow rotation permits most of the g-modes to couple and form a small group of nonlinear modes, each characterized by one of the indices of the spherical harmonic functions involved; and (3) the observed brightenings of the star are produced by upwelling of convection on a large horizontal scale when the antinodes of the nonlinear oscillation patterns periodically rotate into alignment and cause a temporary local enhancement of energy per unit volume. This model is used to match precisely almost every strong periodicity observed in the complex light curves of the DA white dwarfs G207-9, G38-29, G29-38, and HL Tau 76. If the model has been applied correctly, the results indicate that all four of these variables are rotating slowly with periods in the range from 250 to 500 sec.

Wolff, C. L.↗

Surface generation and detection of coupled fiber-matrix mode acoustic wave propagation in fiber-reinforced composites

A technique is described that makes it possible to transmit and receive bulk ultrasonic waves launched from the same surface of a composite sheet by means of transducers mounted on variable angle blocks. A straightforward approach to measure the velocity and attenuation of this wave is presented. A bulk compressional wave of 930,000 cm/sec velocity was launched and received in this manner in an 8-ply unidirectional T-300-5208 epoxy composite. Preliminary results indicate that parameters associated with this wave might be sensitive to accumulated damage in a composite; thus, the technique has a potential for NDE in structures made from composite materials.

Yost, W. T.↗

Phase transitions in HfO2 probed by first-principles computations

Ever since ferroelectricity was discovered in HfO2, the question of its origin remains controversial. Here, we probe this question using a combination of Landau theory of phase transitions and first-principles computations. In such an approach, the energy landscape associated with the phase transition between cubic and different experimentally demonstrated phases of HfO2 (tetragonal, monoclinic, orthorhombic Pbca, orthorhombic Pnma, and orthorhombic Pca21) is explored using density functional theory calculations. Computations revealed that stabilization of all but orthorhombic Pbca phase is driven by a single unstable zone-boundary antipolar mode X2−. When coupled with zone-center modes (Γ1+ and Γ3+), it stabilizes the tetragonal phase. Coupling with four additional modes (Γ5+, X3−, X5−, X5+) results in the monoclinic phase, which is the ground state of the material. If, however, Γ5+ mode is replaced with Γ4− mode, orthorhombic polar phase Pca21 is stabilized. The application of this framework to examine the effect of electric field on the ferroelectric phase of hafnia reveals that the field of 5 MV/cm is capable of stabilizing ferroelectric phase over the monoclinic one at 0 K.

Physics↗

Methods of component mode synthesis

A generalized substructure coupling, or component mode synthesis, procedure is described. Specific methods, applications, and such special topics as damping and experimental verification are surveyed.

Craig, R. R., Jr.↗

Non-linear mixing in coupled photonic crystal nanobeam cavities due to cross-coupling opto-mechanical mechanisms

We investigate the coupling between mechanical and optical modes supported by coupled, freestanding, photonic crystal nanobeam cavities. We show that localized cavity modes for a given gap between the nanobeams provide weak optomechanical coupling with out-of-plane mechanical modes. However, we show that the coupling can be significantly increased, more than an order of magnitude for the symmetric mechanical mode, due to optical resonances that arise from the interaction of the localized cavity modes with standing waves formed by the reflection from thesubstrate. Finally, amplification of motion for the symmetric mode has been observed and attributed to the strong optomechanical interaction of our hybrid system. The amplitude of these self-sustained oscillations is large enough to put the system into a non-linear oscillation regime where a mixing between the mechanical modes is experimentally observed and theoretically explained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chemistry-Climate Interactions in the GISS GCM: Tropospheric Chemistry Model Description and Evaluation - Part 1

A tropospheric chemistry module has been developed for use within the Goddard Institute for Space Studies (GISS) general circulation model (GCM) to study interactions between chemistry and climate change. The model uses a simplified chemistry scheme based on CO-NOx-CH4 chemistry, and also includes a parameterization for emissions of isoprene, the most important non-methane hydrocarbon. The model reproduces present day annual cycles and mean distributions of key trace gases fairly well, based on extensive comparisons with available observations. Examining the simulated change between present day and pre-industrial conditions, we find that the model has a similar response to that seen in other simulations. It shows a 45% increase in the global tropospheric ozone burden, within the 25% - 57% range seen in other studies. Annual average zonal mean ozone increases by more than 125% at Northern Hemisphere middle latitudes near the surface. Comparison of model runs that allow the calculated ozone to interact with the GCM's radiation and meteorology with those that do not shows only minor differences for ozone. The common usage of ozone fields that are not calculated interactively seems to be adequate to simulate both the present day and the pre-industrial ozone distributions. However, use of coupled chemistry does alter the change in tropospheric oxidation capacity, enlarging the overall decrease in OH concentrations from the pre-industrial to the present by about 10% (-5.3% global annual average in uncoupled mode, -5.9% in coupled mode). This indicates that there may be systematic biases in the simulation of the pre-industrial to present day decrease in the oxidation capacity of the troposphere (though a 10% difference is well within the total uncertainty). Global annual average radiative forcing from pre-industrial to present day ozone change is 0.32 W/sq m. The forcing seems to be increased by about 10% when the chemistry is coupled to the GCM. Forcing values greater than 0.8 W/sq m are seen over large areas of the United States, Southern Europe, North Africa, the Middle East, Central Asia, and the Arctic. Radiative forcing is greater than 1.5 W/sq m over parts of these areas during Northern summer Though there are local differences, the radiative forcing is overall in good agreement with the results of other modeling studies in both its magnitude and spatial distribution, demonstrating that the simplified chemistry is adequate for climate studies.

Shindell, Drew T.↗

Propagation characteristics of optical fiber structures with arbitrary shape and index variation

The application of the scalar wave-fast Fourier transform (SW-FFT) technique to the computation of the propagation characteristics of some complex optical fiber structures is presented. The SW-FFT technique is based on the numerical solution of the scalar wave equation by a forward-marching fast Fourier transform method. This solution yields the spatial configuration of the fields as well as its modal characteristics in and around the guiding structure. The following are treated by the SW-FFT method: analysis of coupled optical fibers and computation of their odd and even modes and coupling length; the solution of tapered optical waveguides (transitions) and the study of the effect of the slope of the taper on mode conversion; and the analysis of branching optical fibers and demonstration of their mode-filtering and/or power-dividing properties.

Manshadi, F.↗

Ultrasonic attenuation - Q measurements on 70215,29

Ultrasonic attenuation measurements have been made on an aluminum alloy, obsidian, and rock samples including lunar sample 70215,29. The measurement technique is based on a combination of the pulse transmission method and the forced resonance method. The technique is designed to explore the problem of defining experimentally, the Q of a medium or sample in which mode conversion may occur. If modes are coupled, the measured attenuation is strongly dependent on individual modes of vibration, and a range of Q-factors may be measured over various resonances or from various portions of a transient signal. On 70215,29, measurements were made over a period of a month while the sample outgassed in hard varuum. During this period, the highest measured Q of this sample increased from a few hundred into the range of 1000-1300.

Warren, N.↗

Oscillations of rotating neutron stars

A perturbation technique is used to compute the rotational corrections to the nonradial oscillation spectrum of a realistic neutron star model. The l = l(0) oscillations are coupled to l = l(0) + or - 1 oscillations by the Coriolis force. To calculate the rotational corrections to the quadrupole, l(0) = 2, oscillation modes, previous calculations of the nonradial oscillation spectrum of this neutron star model are extended to include l(0) = 1 and l(0) = 3 modes, as well as many higher overtones at each value of l(o). As an example of this technique, the rotational corrections to two quadrupole toroidal modes are computed. For these modes the coupling to the spheroidal class of oscillations produced by the Coriolis force introduces a nonzero radial component to the velocity field, as well as a nonvanishing Lagrangian density perturbation. This result is used to compute the neutrino damping rates for these toroidal modes of a rotating neutron star. The neutrino damping time can approach the gravitational radiation damping time in rotating neutron stars if the central temperature is high enough. The rotationally induced coupling of spheroidal oscillations to toroidal modes can also produce significant displacements at the stellar surface in some of the toroidal modes. The damping rates due to this process for the rotationally corrected toroidal modes are estimated. The coupling of surface motions to the toroidal modes also have interesting implications for channeling energy, e.g., that associated with a glitch in the crust, to the surface of the star. Perhaps this might produce observable effects in the pulsar emission process or a gamma-ray burst event.

Strohmayer, Tod E.↗

Cooling and squeezing via quadratic optomechanical coupling

We explore the physics of optomechanical systems in which an optical cavity mode is coupled parametrically to the square of the position of a mechanical oscillator. We derive an effective master equation describing two-phonon cooling of the mechanical oscillator. We show that for high temperatures and weak coupling, the steady-state phonon number distribution is nonthermal (Gaussian) and that even for strong cooling the mean phonon number remains finite. Moreover, we demonstrate how to achieve mechanical squeezing by driving the cavity with two beams. Finally, we calculate the optical output and squeezing spectra. Implications for optomechanics experiments with the membrane-in-the-middle geometry or ultracold atoms in optical resonators are discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗