Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

The abundance of ammonia in Comet P/Halley derived from ultraviolet spectrophotometry of NH by ASTRON and IUE

From an analysis of the spatial profiles of both the NH and OH UV emissions observed by the ASTRON satellite, the ratio of ammonia-to-water production rates in Comet Halley on April 9, 1986 is derived and found to lie in the range of 0.44-0.94 percent. In order to compare this result with those based on both ground-based and in situ observations made on other dates during the 1985-1986 apparition of the comet, the IUE observational data base for December 1985 and March-April 1986 is used to evaluate the ratio of NH to OH column density in the IUE field of view and thus constrain the long-term behavior of this ratio. The IUE data base indicates that, to within a factor of 2, the ammonia-to-water production rate ratio is the same for a small sample of moderately bright comets observed recently.

Feldman, P. D.↗

Infrared spectroscopy and photometry of Comet Austin 1990 V

3-micron and 10-micron spectra and IR photometry of the dynamically new Comet Austin 1990 V were obtained for March-May 1990. An unusual 9-11 micron emission feature 15-20 percent above the continuum is evident at 0.78 AU postperihelion. The shape, in particular a peak at 11.06 micron, differs from that seen in Halley and several other comets, suggesting a difference in the mineralogy of the silicate grains. The 3.1-7.7 micron spectrum at 0.35 AU shows no obvious feature; feature/continuum contrast of the 3.36 micron emission feature is less than about 5 percent. Based on the IR photometry and a dust model weighted toward small grains, the dust production rate on 6 May at 0.78 AU was about 3 x 10 exp 5 g/s. The corresponding dust/gas mass ratio was about 0.1, classifying Austin as a dust-poor comet. This designation refers only to the relative dust cross section, not to the total mass.

Hanner, Martha S.↗

Long-slit ultraviolet spectroscopy of Comet Austin (1990 V)

The spatial distributions of the brightest features in the far-UV spectrum of Comet Austin were measured, and it is found that they are generally similar to those found for Comet Halley during two rocket observations in 1986. As in Halley, the CO profile can be fit to a radial outflow profile for a source whose size is smaller than the instrumental spatial resolution. Neither the shape nor the magnitude of the extended atomic carbon profiles, however, can be satisfactorily explained by the photodissociation of CO. No evidence is found for an extended source of CO in the coma; thus, suggestions that the additional carbon can come directly from grains are difficult to accept since Austin is a low-dust comet. The presence of the O I 1356 A feature implies that there is a photoelectron excitation source in the coma. The measured O I 1304 A distribution is consistent with H2O being the dominant source of oxygen in the coma. The atomic sulfur profile matches that expected for a daughter product of relatively short-lived parents.

Sahnow, David J.↗

The O(1D) distribution of Comet Austin 1989c1 = 1990 V

Flat field images of Comet Austin 1990 V were obtained from the morning sky, and a log of the observations is presented. Absolute intensity calibrations of the comet images are obtained along with scans of the cometary forbidden O I 6300 emission. The O(1D) distribution of the comet is found, and the OH mean lifetime at 1 AU is determined to be (1.1 +/- 0.3) 10 exp 5 s.

Schultz, D.↗

Atmospheric holes and small comets

Global images of Earth's UV dayglow as gained with an imaging photometer on board Dynamics Explorer 1 exhibit transient decreases, or atmospheric holes, in the dayglow intensities over areas with diameters about 50 km. Features of these atmospheric holes include (1) preferential motion in the east-to-west direction across the sunlit face of Earth, (2) similar diurnal variations in occurrence rates as those for radar meteors, (3) correlation of the occurrence rates with the nonshower rates as determined with forward scatter radar, and (4) larger angular diameters for these atmospheric holes when the spacecraft approaches Earth during its perigee passes. These atmospheric holes are interpreted in terms of obscuration of the dayglow by water clouds from the disruption and subsequent vaporization of small comets at low altitudes above the atmosphere. Supporting evidence for the existence of these small comets is given by their telescopic sighting at greater altitudes before disruption and the detection of water bursts in Earth's upper atmosphere. The small-comet hypothesis and its relationship to geophysical, lunar, and interplanetary phenomena are discussed.

Frank, L. A.↗

Nonlinear low frequency (LF) waves - Comets and foreshock phenomena

A review is conducted of LF wave nonlinear properties at comets and in the earth's foreshock, engaging such compelling questions as why there are no cometary cyclotron waves, the physical mechanism responsible for 'dispersive whiskers', and the character of a general description of linear waves. Attention is given to the nonlinear properties of LF waves, whose development is illustrated by examples of waves and their features at different distances from the comet, as well as by computer simulation results. Also discussed is a curious wave mode detected from Comet Giacobini-Zinner, both at and upstream of the bow shock/wave.

Tsurutani, Bruce T.↗

Effects of hydrodynamics and thermal radiation in the atmosphere after comet impacts

Radiation phenomena in the atmosphere after impacts of cosmic bodies have special features in comparison with the surface nuclear explosions. First, initial concentration of energy after the impact is lower, and second, a wake after the passage of the meteoroid through the atmosphere has a dramatic effect on the atmospheric flow and radiation transfer. Consequently, scaling laws can not be employed for prediction of the flow in the atmosphere and the light flux on the Earth's surface. If a density of high-velocity impactor is low relative to the ground, as in a case of a comet impact on rocks, a major part of the kinetic energy is converted to internal energy of dense hot vapors. But radiation effects can be essential even for fairly low velocities of the impactor. To clarify this issue we have undertaken calculations of 100-Mt explosions at the Earth's surface caused by small comets with velocities from 10 to 70 km/sec. That is, the initial concentration of energy has been varied. The calculations have shown that for velocities of the comet greater or about 20 km/sec a portion of energy emitted from the fireball exceeds 20% of the total energy of the explosion and this quantity does not change very much with the velocity. Other aspects of this investigation are discussed.

Nemchinov, I. V.↗

Consequences of impacts of small asteroids and comets with Earth

The fragmentation of a small asteroid in the atmosphere greatly increases its cross sections for aerodynamic braking and energy dissipation. At a typical impact velocity of 22 km/s, the atmosphere absorbs more than half the kinetic energy of stony meteoroids with diameters, D(sub m), less than 220 m and iron meteoroids with D(sub m) less than 80 m. The corresponding diameter for comets with impact velocity 50 km/s is D(sub m) less than 1600 m. Most of the atmospheric energy dissipation occurs in a fraction of a scale height, so large meteors appear to 'explode' or 'flare' at the end of their visible paths. This dissipation of energy in the atmosphere protects the earth from direct impact damage (e.g., craters), but it produces a blast wave that can do considerable damage. The area of destruction around the impact point in which the over-pressure in the blast wave exceeds 4 lb/sq in = 2.8 x 10(exp 5) dynes/cu cm, which is enough to knock over trees and destroy buildings, increases rapidly from zero for chondritic meteoroids less than 56 m in diameter (15 megatons) to about 200 sq km for those 80 m in diameter (48 megatons); the probable diameter of the tunguska impactor of 1908 is about 80 m. Crater formation and earthquakes are not significant in land impacts by stony asteroids less than about 200 m in diameter because of the air protection. A tsunami is probably the most devastating type of damage for asteroids 200 m to 1 km in diameter. An impact by an asteroid this size anywhere in the Atlantic would devastate coastal areas on both sides of the ocean. An asteroid a few kilometers across would produce a tsunami that would reach the foothills of the Appalachian Mountains in the upper half of the East Coast of the United States. Most of Florida is protected from a tsunami by the gradual slope of the ocean off its coast, which causes most of the tsunami energy to be reflected back into the Atlantic. The atmosphere plume produced by asteroids with diameters exceeding about 120 m cannot be contained by the atmosphere, so this bubble of high-temperature gas forms a new layer on top of the atmosphere. The dust entrapped in this hot gas is likely to have optical depths exceeding tau = 10 for asteroids with diameters exceeding about 0.5 to 1 km. The optical flux from asteroids 60 m or more in diameter is enough to ignite pine forests. However, the blast wave from an impacting asteroid goes beyond the radius in which the fire starts. The blast wave tends to blow out the fire, so it is likely that the impact will char the forest, as at Tunguska, but the impact will not produce a sustained fire. Because comets dissipate their energy much higher in the atmosphere than asteroids, they illuminate a much larger region and their blast wave is weaker. So they are much more effective in producing large fires. This suggests that the KT impactor was a comet rather than an asteroid.

Hills, J. G.↗

The crash of P/Shoemaker-Levy 9 into Jupiter and its implications for comet bombardment on Earth

Periodic Comet Shoemaker/Levy 9 will impact Jupiter in late July 1994. The comet, which broke into more than 20 telescopically detectable fragments when it passed with the Roche lobe of Jupiter on July 8, 1992, is captured in a highly eccentric orbit about Jupiter. The 21 recognized nuclei will be spread out in a train of the order 7 x 10(exp 6) km long at the time of impact, and the impacts will be spread in time over about 5 1/2 days centered on about July 21.2 UT. In addition to the train of recognized bright nuclei, the comet consists of 'wings' of unresolved bodies that are the source of a very broad composite dust tail. The linear extent of the wings is about an order of magnitude greater than that of the train of recognized discrete nuclei. Collision of the wings will be spread in time over several months. Thus the impact of P/S-L 9 with Jupiter will be an event of appreciable duration.

Shoemaker, E. M.↗

Aeronautics and Space Reports Number 267: Comet Impacts Jupiter

This video contains three different segments of computer generated simulations of the impact of comet Shoemaker-Levy 9 with Jupiter that will take place in July 1994. It includes interviews with Shoemaker and Levy, discussing pictures taken at Palomar Observatory, the comet's approach to Jupiter, fragment size, and the affects of the comet's impact on Jupiter and its atmosphere. The impact will be viewed by the Galileo spacecraft.

Source record↗

CCD imaging of Comet Wilson (1987VII) - A quantitative coma analysis

Distinctive cometary components (dust, ions, and radicals) are studied on the basis of 2D, narrow-band CCD images of Comet Wilson (1987VII). The fact that Comet Wilson showed no significant structures in the neutral coma during its first perihelion passage is additional evidence for the hypothesis that dynamically new comets do not show a heterogeneous nucleus, but still have a relatively uniform surface. The deviations from the 1/rho law for the decrease of surface brightness as a function of nuclear distance are explained by a combination of short-term variations in the dust production and the effects of solar radiation pressure. The C2 production rate remains basically constant during the whole observational period, while the CN production rate decreases with increasing heliocentric distance. It is inferred that the formation of C2 might be due both to photolytic destruction of some parent molecules as well as to chemical reactions between other species.

Schulz, Rita↗

Carbon in Comet Halley dust particles

Comets are small bodies of the solar system containing primarily a mixture of frozen gases and carbonaceous and mineral grains. They are likely to preserve volatile mineral from cold regions of the protosolar nebula and remnants of interstellar dust and gas. More than 2500 mass spectra of cometary grains with masses in the range 5 x 10 exp -17 to 5 x 10 exp -12 g were measured in situ by PUMA1 and PUMA2 mass spectrometers on board the VEGA spacecraft during flyby missions to Comet Halley. In this paper, we discuss different organic and inorganic C-containing components discovered so far in Comet Halley dust particles, the nature and abundance of which provide information about possible astrophysical sources of C and constrain models of interstellar grains.

Fomenkova, M. N.↗

Comet coma sample return instrument

The sample collection technology and instrument concept for the Sample of Comet Coma Earth Return Mission (SOCCER) are described. The scientific goals of this Flyby Sample Return are to return to coma dust and volatile samples from a known comet source, which will permit accurate elemental and isotopic measurements for thousands of individual solid particles and volatiles, detailed analysis of the dust structure, morphology, and mineralogy of the intact samples, and identification of the biogenic elements or compounds in the solid and volatile samples. Having these intact samples, morphologic, petrographic, and phase structural features can be determined. Information on dust particle size, shape, and density can be ascertained by analyzing penetration holes and tracks in the capture medium. Time and spatial data of dust capture will provide understanding of the flux dynamics of the coma and the jets. Additional information will include the identification of cosmic ray tracks in the cometary grains, which can provide a particle's process history and perhaps even the age of the comet. The measurements will be made with the same equipment used for studying micrometeorites for decades past; hence, the results can be directly compared without extrapolation or modification. The data will provide a powerful and direct technique for comparing the cometary samples with all known types of meteorites and interplanetary dust. This sample collection system will provide the first sample return from a specifically identified primitive body and will allow, for the first time, a direct method of matching meteoritic materials captured on Earth with known parent bodies.

Albee, A. L.↗

Application of MCM image construction to IRAS comet observations

There is a wealth of IRAS comet data, obtained in both the survey and pointed observations modes. However, these measurements have remained largely untouched due to difficulties in removing instrumental effects from the data. We have developed a version of the Maximum Correlation Method for Image Construction algorithm (MCM) which operates in the moving coordinate system of the comet and properly treats both real cometary motion and apparent motion due to spacecraft parallax. This algorithm has been implemented on a 486/33 PC in FORTRAN and IDL codes. Preprocessing of the IRAS CRDD includes baseline removal, deglitching, and removal of long tails due to dielectric time constants of the detectors. The resulting images are virtually free from instrumental effects and have the highest possible spatial resolution consistent with the data sampling. We present examples of high resolution IRAS images constructed from survey observations of Comets P/Tempel 1 and P/Tempel 2, and pointed observations of IRAS-Araki-Alcock.

Schlapfer, Martin F.↗

A generic interface element for COMET-AR

The implementation of an interface element capability within the COMET-AR software system is described. The report is intended for use by both users of currently implemented interface elements and developers of new interface element formulations. Guidance on the use of COMET-AR is given. A glossary is provided as an Appendix to this report for readers unfamiliar with the jargon of COMET-AR. A summary of the currently implemented interface element formulation is presented in Section 7.3 of this report.

Mccleary, Susan L.↗

Observations of comets with the IUE

This is the final report for Observation of Comets with the IUE, which began in December 1992 and was completed in January 1995. This grant continued our IUE program which began in July 1979 and was terminated in September 1992. Attached in Appendix A is a complete list of publications related to IUE observations of comets from 1980 to the present. Publication numbers 51-53 appeared during the December 1992 - January 1995 period and copies of these are being forwarded to the NSSDC along with this report. Papers presented at recent scientific meetings are listed in Appendix B. During this period we have concentrated our effort into two distinct areas: new observations of comets of interest and continuing analysis of the data from previous observations.

Feldman, Paul D.↗

Explosions of infalling comets in Jupiter's atmosphere

In view of the expected collision of comet Shoemaker-Levy 9 (1993e) with Jupiter in 1994 July, we calculate basic properties of the initial interaction for a simplified Jovian atmosphere. The comet is expected to impact Jupiter at 60 km/sec and at an angle of 45 deg to the zenith. The shock wave generated by the bolide should be optically thick once it has penetrated to an atmospheric density approximately 10(exp -6) gr/cm(exp 3), and we calculate the post-shock conditions assuming local thermodynamic equilibrium (LTE) for shock velocities v(sub sh) in the range 10 to 60 km/sec and preshock densities rho(sub a) = 10(exp -6) to 10(exp -2) gr/cm(exp 3). Our shock calculations include molecular hydrogen, atomic hydrogen, ionized hydrogen, neutral helium, and singly ionized helium. Even at the highest shock velocity, the gas is only partially ionized and the postshock temperature rises with preshock density in order to maintain the ionization. The value of the effective shock adiabatic index gamma(sub sh) varies from 1.17 (at low v(sub sh) and rho(sub a) to 1.40 (at high v(sub sh) and rho(sub a). The ablation rate is limited by the radiative flux that reaches the bolide surface. We argue that the ablated gas does not efficiently transfer its kinetic energy to the atmosphere, and it ultimately slows in a similar fashion to the comet material. As the bolide initially falls through the atmosphere, the character of the shock emission changes. At rho(sub a) approximately 10(exp -8) gr/cm (exp 3), the gas is optically thin and we expect line emission; in the optical spectrum, Balmer emission is expected from the shocked atmosphere and low-ionization metal lines from ablated cometary material. At rho(sub a) approximately 10(exp -6) gr/m(exp 3), the shocked gas is optically thick and the shock front near the bolide produces a blackbody spectrum. The temperature is favorable for ultraviolet (1000 to 3000 A) emission and the luminosity may be approximately 5 x 10(exp 23) ergs/sec for approximately 0.6 sec for a bolide 1 km in radius. At rho(sub a) approximately 10(exp -4) gr/cm(exp 3), the bolide has passed below the ultraviolet photosphere. The shock front emits considerable ionizing radiation, but it is absorbed in a narrow preshock region. The bolometric correction for the optical luminosity is large and we expect a 3000 to 8000 A luminosity of approximately 3 x 10(exp 23) ergs/sec for approximately 1 sec. The optical emission is strongly peaked in the vicinity of the bolide. The bolide does have a somewhat less luminous, optically thick trail extending greater than or equal to 10 km, but the radiation is characterized by a temperature of 4000 to 5000 K. From the fragmentation model of Chyba, Thomas, & Zahnle (1993), the bolide deposits most of its kinetic energy at rho(sub a) approximately 10(exp -3) gr/cm(exp 3) and this is the effective explosion site. The shock wave from such an explosion can move up about one density scale height. We examine the breakout of the shock front from the Jovian atmosphere and find that the shock acceleration in the decreasing density region is slow, so that the energy flux in the shock front is small. Higher velocities might be generated by shock acceleration along the channel left by the bolide if the shock motion can occur before the channel closes off as a result of radiative cooling. Hot gas created by the explosion ultimately rises due to buoyancy on a timescale of a minute. The luminosity is highest when the bubble first rises into the optically thin part of the atmosphere and may be approximately 1 x 10(exp 25) ergs/sec in the near-infrared. Roughly 1% of the initial bolide energy may be radiated in this way; the rest of the energy is lost to sound waves from the initial explosion and to work done by the bubble on the surrounding atmosphere.

Chevalier, Roger A.↗

Tidal disruption of Periodic Comet Shoemaker-Levy 9 and a constraint on its mean density

The apparent tidal disruption of Periodic Comet Shoemaker-Levy 9 (1993e) during a close encounter within approximately 1.62 planetary radii of Jupiter can be used along with theoretical models of tidal disruption to place an upper bound on the density of the predisruption body. Depending on the theoretical model used, these upper bounds range from rho(sub c) less than 0.702 +/- 0.080 g/cu cm for a simple analytical model calibrated by numerical smoothed particle hydrodynamics (SPH) simulations to rho(sub c) less than 1.50 +/- 0.17 g/cu cm for a detailed semianalytical model. The quoted uncertainties stem from an assumed uncertainty in the perijove radius. However, the uncertainty introduced by the different theoretical models is the major source of error; this uncertainty could be eliminated by future SPH simulations specialized to cometary disruptions, including the effects of initially prolate, spinning comets. If the SPH-based upper bound turns out to be most appropriate, it would be consistent with the predisruption body being a comet with a relatively low density and porous structure, as has been asserted previously based on observations of cometary outgassing. Regardless of which upper bound is preferable, the models all agree that the predisruption body could not have been a relatively high-density body, such as an asteroid with rho approximately = 2 g/cu cm.

Boss, Alan P.↗