Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Influences of Na + co-cation on the structure and performance of Cu/SSZ-13 selective catalytic reduction catalysts

Here, a series of Cu,H/SSZ-13 and Cu,Na/SSZ-13 catalysts were synthesized, degreened and hydrothermally aged for use in the standard NH 3 -SCR reaction. Surface area/pore volume and XRD analyses were used to probe the textural properties of the catalysts. H 2 -TPR and EPR were utilized to quantitatively describe the various Cu species. NH 3 -SCR was tested at both a lower space velocity to probe the light-off behavior, and at a higher space velocity to generate data for kinetic analysis. Na + co-cation addition was found to promote turnover rates of isolated Cu-ions at low reaction temperatures. However, this promoting effect is compromised by decreases in Cu exchange capacity and hydrothermal stability of the Cu,Na/SSZ-13 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Investigation of the swelling behavior of cationic exchange resins saturated with Na{sup +} ions in a C{sub 3}S paste

Ion exchange resins (IERs) are widely used by the nuclear industry to decontaminate radioactive effluents. Spent products are usually encapsulated in cementitious materials. However, the solidified waste form can exhibit strong expansion, possibly leading to cracking, if the appropriate binder is not used. In this work, the interactions between cationic resins in the Na{sup +} form and tricalcium silicate are investigated during the early stages of hydration in order to gain a better understanding of the expansion process. It is shown that the IERs exhibit a transient swelling of small magnitude due to the decrease in the osmotic pressure of the external solution. This expansion, which occurs just after setting, is sufficient to damage the material which is poorly consolidated for several reasons: low degree of hydration, precipitation of poorly cohesive sodium-bearing C–S–H, and very heterogeneous microstructure with zones of high porosity.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Electrochemical characterization of B-site cation-excess Pr 2 Ni 0.75 Cu 0.25 Ga 0.05 O 4+δ cathode for IT-SOFCs

In this paper, the B-site cation-excess K 2 NiF 4 -type structure oxide, Pr 2 Ni 0.75 Cu 0.25 Ga 0.05 O 4+δ (PNCG) is investigated as a cathode for intermediate-temperature solid oxide fuel cells (IT-SOFCs). XRD result shows that PNCG cathode is chemically compatible with the electrolyte Gd 0.1 Ce 0.9 O 2-δ (GDC) at 900 °C for 5 h. The PNCG material exhibits a semiconductor to metal transition around 425 °C. The thermal expansion coefficient (TEC) of the PNCG sample is 12.72×10 -6 K -1 between 30 and 850 °C in air. The polarization resistance (R p ) of PNCG cathode on GDC electrolyte is 0.105, 0.197 and 0.300 Ω cm 2 at 800, 750, 700 °C, respectively. A maximum power density of 371 mW cm -2 is obtained at 800 °C for single-cell with 300 μm thick GDC electrolyte and PNCG cathode. Finally, the results of this study demonstrate that PNCG can be a promising cathode material for IT-SOFCs.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Phosphoranimines containing cationic N-imidazolinium moieties

For this study, three new monomeric phosphoranimines (PAs; R'—N=PR 3 ) were synthesized by the Staudinger route using 2-azido-1,3-dimethylimidazolinium hexafluorophosphate [ADMImPF] and various phosphines to form their respective PA salts of triphenylphosphine (1), tri(n-octyl)phosphine (2), and tris(2,2,2-trifluoroethoxy)phosphite (3). These PA salts have a cationic imidazolinium moiety attached to nitrogen. Interestingly, 2 is a room temperature ionic liquid (RTIL) with a melting point around -5°C and a viscosity of 740cP at 25.5°C. 1 and 2 show stability to moisture exposure and atmosphere for weeks whereas 3 is not stable toward atmospheric moisture undergoing decomposition to form 2-amino-1,3-dimethylimidazolinium phosphate (4). Thermal analyses reveal that 1 and 2 are stable to 90°C under nitrogen, but 3 undergoes degradation by exposure to moisture and/or elevated temperature. All compounds exhibit similar multinuclear NMR chemical shifts as compared to their corresponding phosphine oxide counterparts. However, their respective X-ray structure determinations indicate that 2 has an open structure with the octyl groups that avoid the ionic charges, whereas 1 and 3 have tighter structural packing of the hexafluorophosphate to their pendant groups.$\longequal$

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reactions of atomic thorium and uranium cations with CF 4 studied by guided ion beam tandem mass spectrometry

The fundamental chemistry of the actinides continues to be an area of interest because of their use in nuclear fuel cycles. Here, the kinetic energy dependences of the reactions of thorium and uranium cations with CF 4 were studied using guided ion beam tandem mass spectrometry. The products observed include AnF x + (An = Th or U, x = 1-3) and CF y + (y = 1-3). Although most reactions are exothermic according to literature thermochemistry, all cross sections display strong endothermic features indicating a restriction in the reactivity at low energies. For both actinides, only the AnF + + CF 3 product channel is observed at low energies; however, its formation proceeds very inefficiently. Furthermore, these results indicate that the reactions of Th + and U + with CF 4 are not thermodynamically driven and suggest that the low-energy reactivity results from precise alignment of the reactants.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Coarse-grained simulation of colloidal self-assembly, cation exchange, and rheology in Na/Ca smectite clay gels

Knowledge Gap: The aggregation of clay minerals—layered silicate nanoparticles—strongly impacts fluid flow, solute migration, and solid mechanics in soils, sediments, and sedimentary rocks. Experimental and computational characterization of clay aggregation is inhibited by the delicate water-mediated nature of clay colloidal interactions and by the range of spatial scales involved, from 1 nm thick platelets to flocs with dimensions up to micrometers or more. Simulations: Using a new coarse-grained molecular dynamics (CGMD) approach, we predicted the microstructure, dynamics, and rheology of hydrated smectite (more precisely, montmorillonite) clay gels containing up to 2,000 clay platelets on length scales up to 0.1 μm. Further, simulations investigated the impact of simulation time, platelet diameters (6 to 25nm), and the ratio of Na to Ca exchangeable cations on the assembly of tactoids (i.e., stacks of parallel clay platelets) and larger aggregates (i.e., assemblages of tactoids). We analyzed structural features including tactoid size and size distribution, basal spacing, counterion distribution in the electrical double layer, clay association modes, and the rheological properties of smectite gels. Findings: Our results demonstrate new potential to characterize and understand clay aggregation in dilute suspensions and gels on a scale of thousands of particles with explicit representation of counterion clouds and with accuracy approaching that of all-atom molecular dynamics (MD) simulations. For example, our simulations predict the strong impact of Na/Ca ratio on clay tactoid formation and the shear-thinning rheology of clay gels.

42 ENGINEERING↗
DOE OSTI2019

Highly efficient removal of both cationic and anionic dyes from wastewater with a water-stable and eco-friendly Fe-MOF via host-guest encapsulation

Here, a water-stable cationic Fe based metal organic framework, CPM-97-Fe, was successfully synthesized in a large scale by a modified method (CPM: Crystalline Porous Materials). The adsorption behaviors, including removal efficiency, adsorption kinetics and isotherms of nine hazardous dyes in wastewater were investigated with different pH and organic solvents. The pseudo-second-order adsorption rate constant follows the order of Reactive Brilliant Red X-3B (X-3B, 0.0205 g mg -1 min -1 ) > Acid orange 7 (AO7, 0.0112 g mg -1 min -1 ) > Congo Red (CR, 0.0080 g mg -1 min -1 ) > Methylene Blue (MB, 0.0061 g mg -1 min -1 ) > Rhodamine B (RhB, 0.0049 g mg -1 min -1 ) > Croscein Scarlet 3B (CS3B, 0.0041 g mg -1 min -1 ) > Methyl Blue (MB, 0.0017 g mg -1 min -1 ) = New Coccine (NC, 0.0017 g mg -1 min -1 ) > Acid Black 1 (AB1, 0.0014 g mg -1 min -1 ). It is found that the adsorption quasi-equilibrium can reach quickly within 30 min, but the dyes with proper structure (i.e. proper distance between two sulfonic groups, less azo benzene hindrance effect, more reactive Cl groups, and more benzene rings), smaller molecular size, more negative charges, lower molecular mass favor the faster adsorption. The adsorption capacity obeys another sequence of CR (831 mg g -1 ) > X-3B (648 mg g -1 ) > AO7 (502 mg g -1 ) > MLB (380 mg g -1 ) > CS3B (356 mg g -1 ) > AB1 (325 mg g -1 ) > RhB (306 mg g -1 ) > MB (304 mg g -1 ) > NC (157 mg g -1 ). It is disclosed that CPM-97-Fe can adsorb more dyes with larger molecular mass, less negative charges, and a proper structure. Especially for Congo red, the adsorption capacity on CPM-97-Fe is 831 mgg -1 , 8.1 times that on activated carbon (103 mgg -1 ). Even the adsorption capacities of very bulky Rhodamine B and Methyl Blue reach as high as 306 and 304 mgg -1 , respectively, ranking the highest level among MOF materials. Moreover, the special structure of CPM-97-Fe with big open windows and high specific surface area of 1397.0 m 2 g -1 contributes to the fast adsorption and high capacity towards all investigated dyes via the host-guest encapsulation mechanism including electrostatic interaction, ion exchange, π-π stacking interaction, as well as pore filling.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Anionic and cationic redox and interfaces in batteries: Advances from soft X-ray absorption spectroscopy to resonant inelastic scattering

Recent advances in battery science and technology have triggered both the challenges and opportunities on studying the materials and interfaces in batteries. In this paper, we review the recent demonstrations of soft X-ray spectroscopy for studying the interfaces and electrode materials. The focus of this review is on the recently developed mapping of resonant inelastic X-ray scattering (mRIXS) as a powerful probe of battery chemistry with superior sensitivity. Six different channels of soft X-ray absorption spectroscopy (sXAS) are introduced for different experimental purposes. Although conventional sXAS channels remain effective tools for quantitative analysis of the transition-metal states and surface chemistry, we elaborate the limitations of sXAS in both cationic and anionic redox studies. Particularly, based on experimental findings in various electrodes, we show that sXAS is unreliable for studying oxygen redox. We then demonstrate the mRIXS as a reliable technique for fingerprinting oxygen redox and summarize several crucial observations. We conclude that mRIXS is the tool-of-choice to study both the practical issue on reversibility of oxygen redox and the fundamental nature of bulk oxygen states. Finally, we hope this review clarifies the popular misunderstanding on oxygen sXAS results of oxide electrodes, and establishes a reliable technique for detecting oxygen redox through mRIXS.

25 ENERGY STORAGE↗
DOE OSTI2023

Enhancing durability of polymer electrolyte membrane using cation size selective agents

Radical species generated during proton exchange membrane fuel cell operation considerably limit the achievable durability, particularly for heavy-duty vehicle applications. A promising solution to the problem is the incorporation of radical scavenger additives such as cerium which mitigates chemical attacks on the membrane. However, these additives migrate during fuel cell operation causing a loss in durability and performance due to detrimental interaction with various components of the fuel cell. Here, we study cation size selective agents as a means to immobilize cerium within perfluorosulfonic acid (PFSA) membranes. We synthesized an organometallic complex of cerium with 15-Crown-5 and investigated the effectiveness of this complex to immobilize cerium. Over 300% increase in cerium retention and an 80% increase in chemical durability were observed owing to the stabilization effect of crown ethers on cerium. Migration under a potential gradient can be eliminated while the complex also contributes to the enhancement in cerium radical scavenging activity. In conclusion, current challenges with the proposed solution are highlighted and future work is discussed.

25 ENERGY STORAGE↗
DOE OSTI2018

Biogas reforming over Ni catalysts dispersed in different mixed oxides containing Zn2+, Al3+ and Zr4+cations

Highlights: • The oxides mixture containing NiO, ZnO, Al{sub 2}O{sub 3}, NiAl{sub 2}O{sub 4} and ZnAl{sub 2}O{sub 4} was detected. • The results exhibited intermediate interactions between Ni0 and other phases. • Dry reforming of methane was applied to production of synthesis gas. • Deposition of the carbon filamentous on the catalysts surface was observed. - Abstract: The active phase plays an important role in the catalytic activity. However, its applicability is directly associated with other present phases in the mixture. In view of this, we report the performance of Ni catalysts dispersed on mixed oxides containing Zn{sup 2+}, Al{sup 3+} and Zr{sup 4+}cations in biogas reforming. For this purpose, the samples were characterized by X-ray powder diffraction, which showed the formation of a homogeneous mixture of binary (NiO, ZnO, ZrO{sub 2} and Al{sub 2}O{sub 3}) and ternary (NiAl{sub 2}O{sub 4} and ZnAl{sub 2}O{sub 4}) oxides. The temperature-programmed reduction (H{sub 2}-TPR) provided information on the catalyst reduction. The performance of the catalysts was evaluated using two reduction temperatures (650 °C and 750 °C). The reactions were carried out at 750 °C, where the Ni/ZnAlZr catalyst presented the highest CO{sub 2} conversion attributed to the basic sites, which favored the CO{sub 2} adsorption. Otherwise, the Ni/ZnZr catalyst (reduced at 650 °C) showed a high CH{sub 4} conversion. The catalysts were also reduced at 750 °C and a lower conversion of both reactants (CH{sub 4} and CO{sub 2}) was observed. We argued that the agglomeration process during the reduction condition deteriorates the performance of the catalysts reduced at 750 °C.

09 BIOMASS FUELS↗
DOE OSTI2024

Cellulose acetate membranes exhibit exceptional monovalent to divalent cation selectivities

Salt transport properties of cellulose acetate membranes are reported for a series of chloride salts with mono- valent and divalent cations (LiCl, NaCl, MgCl 2 , CaCl 2 ). Measurements include salt permeability and sorption, with diffusivity values calculated from the permeability and sorption results. We report an exceptionally high LiCl/MgCl 2 selectivity of 750:1. Salts with similar valence (LiCl and NaCl; MgCl 2 and CaCl 2 ) have similar transport properties. The high monovalent/divalent selectivity arises from differences in both sorption and diffusion, with a LiCl/MgCl 2 solubility selectivity of about 11 and a diffusivity selectivity of about 70. Atomistic molecular dynamics simulations show that ions tend to reside in isolated clusters of water. Increasing ion charge strengthens ion–water interactions relative to ion–polymer interactions, explaining the reduced sorption of divalent ions. Diffusion of ions through the membrane occurs via hop-like motion between water clusters. Lithium diffuses faster than magnesium due to weaker ion–water coordination for lithium, which allows for greater mobility within water clusters and more frequent hopping. Altogether, our atomistic simulations suggest that the high LiCl/MgCl 2 selectivity is linked to cellulose acetate’s high water/salt selectivity and is a consequence of low water content and relatively uniform water distribution.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Anion and cation co-doping of Na 4 SnS 4 as sodium superionic conductors

Na based all-solid-state batteries are one of the most promising candidates for large-scale electrochemical energy storage owing to their low cost and outstanding safety properties. The key enabler of this technology is solid electrolyte with sufficiently high ionic conductivity at room temperature. In this work, the design, synthesis, characterization and testing of a series of novel fast Na-ion conductors, Na 4-x-y Sn 1-x A x S 4-y X y with aliovalent cation (P 5+ /Sb 5+ ) and anion substitutions (Cl - /Br - ) of the parent compound Na 4 SnS 4 are reported. The doped samples crystalize in a new phase with space group I4 1 /acd and show ionic conductivities that are one to four orders of magnitude higher than that of undoped Na 4 SnS 4 . R. t. conductivity of 0.64 mS cm -1 is achieved in Na 3.7 Sn 0.8 Sb 0.2 S 3.9 Cl 0.1 with a low activation energy of 0.26 eV. Furthermore, Rietveld refinement against high resolution synchrotron X-ray powder diffraction data reveals that the distribution of the doping ions and the resulted Na vacancies are underlying cause of the enhanced conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Utilizing metal cation reactions with carbonyl sulfide to remove isobaric interferences in tandem inductively coupled plasma mass spectrometry analyses

Carbonyl sulfide (OCS) was used as a reaction gas to investigate gas phase metal (M + ) ion-molecule reactions using the Agilent 8900 inductively coupled plasma tandem mass spectrometer (ICP-MS/MS) to yield insight on how this gas may be used to remove isobaric interferences in analytical measurements. The experimental work was paired with density functional theory (DFT) calculations of the reaction enthalpy to predict whether M + will react with OCS. A multi-element standard containing 46 elements ranging from 9 to 208 u was analyzed in the presence and absence of OCS. When a reaction was observed, the dominant product was the sulfide (MS + ). Oxide products were also observed for many M + but formation was less efficient with OCS than previously observed with other reaction gases. This is likely due to the weaker OC-S bond that makes MS + formation more favorable. Increasing the flow rate from 0.1 to 0.2 mL/min (corresponding to a change in reaction gas pressure from 0.35 to 0.53 Pa (2.6 to 4.0 mTorr)) generally resulted in greater MS + production, including the secondary product MS 2 + for a few cations. The early lanthanide series ions (La + , Ce + , Pr + and Nd + ) produced greater quantities of MO + at the higher pressure, although MS + products were still the dominant product. The DFT-predicted reaction enthalpies were consistent with the observed sulfide formation, with an accuracy >90%; however, model predictions were less accurate for the minor and higher order products (< 77% for MO + ). Finally, the work presented here continues a systematic study of ion-molecule reactions in ICP-MS/MS to understand and develop new and novel ways to analyze complex mixtures with minimal pre-analysis treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structure design enables stable anionic and cationic redox chemistry in a T2-type Li-excess layered oxide cathode

Coupled with anionic and cationic redox chemistry, Li-rich/excess cathode materials are prospective high-energy-density candidates for the next-generation Li-ion batteries. However, irreversible lattice oxygen loss would exacerbate irreversible transition metal migration, resulting in a drastic voltage decay and capacity degeneration. Herein, a metastable layered Li-excess cathode material, T2-type Li 0.72 [Li 0.12 Ni 0.36 Mn 0.52 ]O 2 , was developed, in which both oxygen stacking arrangement and Li coordination environment fundamentally differ from that in conventional O3-type layered structures. By means of the reversible Li migration processes and structural evolutions, not only can voltage decay be effectively restrained, but also excellent capacity retention can be achieved upon long-term cycling. Moreover, irreversible/reversible anionic/cationic redox activities have been well assigned and quantified by various in/ex-situ spectroscopic techniques, further clarifying the charge compensation mechanism associated with (de)lithiation. These findings of the novel T2 structure with the enhanced anionic redox stability will provide a new scope for the development of high-energy-density Li-rich cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2024

An atomistic structural description of the ferrielectric polar phase involving non-coplanar cation displacements

Materials with antipolar-polar transformation are attractive for their large functional responses. However, the antipolar state remains controversial in many materials. For example, recent studies on archetypical antiferroelectric (AFE) materials indicate an incomplete compensation of antiparallel dipoles, which prompted their alternative definition as ferrielectric. Here, we investigated the origin of the ferrielectric (FIE) state in a classical AFE material using X-ray and neutron total scattering. We show that the FIE state arises from 3-dimensional modulation of the cation-centric electric dipoles, which can be viewed as periodic arrangement of 180° twin boundaries with non-Ising characteristics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Role of Cation Coordination in the Electrical and Optical Properties of Amorphous Transparent Conducting Oxides

Amorphous oxide semiconductor materials have demonstrated numerous advantages without compromise of electrical properties as compared to their crystalline counterparts, yet understanding of the fundamental principles allowing this has remained elusive. To study the origins of enhanced optoelectronic properties, we apply high-throughput, combinatorial sputtering, structural and spectral mapping, and computationally intensive ab initio molecular dynamics simulations with density functional theory to a ternary, post-transition metal oxide system, namely, zinc tin oxide. The deposited thin films exhibit a high figure of merit, achieving carrier densities in the range of 1019 to 1020 cm–3 and carrier mobilities up to 35 cm2/Vs. These results highlight the role of local distortions and cation coordination in determining the microscopic origins of carrier generation and transport. In particular, we identify the strong likelihood of Sn undercoordination in both Zn-poor and Zn-rich phases leading to the high carrier concentrations observed. This not only diverges from the still widespread historical indictment of oxygen vacancies controlling carrier population in crystalline oxides but also provides a comprehensive framework to describe the unique structure–property relationships using specific structural and electronic descriptors in disordered phase materials.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS,M↗
DOE OSTI2020

Enumeration as a Tool for Structure Solution: A Materials Genomic Approach to Solving the Cation-Ordered Structure of Na 3 V 2 (PO 4 ) 2 F 3

While powder diffraction methods are routinely utilized to optimize structural models for compounds whose crystal structures are known, the determination of unknown structures is far more challenging. When the unknown structure is large, structure solution can become a virtually intractable problem using standard structure solution methodologies, especially when the space group cannot be unambiguously resolved. One such system is the promising Na-ion battery cathode material Na 3 V 2 (PO 4 ) 2 F 3 whose high temperature and room temperature structures were previously solved, but whose more complex low-temperature structure could not be determined. Here, a novel materials genomic approach is demonstrated for the solution of the unknown 100 K structure of Na 3 V 2 (PO 4 ) 2 F 3 in which enumeration methods are first used to generate a large number (~3,000) of trial structures based on plausible orderings of Na ions and then automated Rietveld refinements are carried out to optimize each of these trial structures. Based on both the analysis of the ensemble of optimized trial structures and the density functional theory energy minimization of selected trial structures, the 100 K structure of Na 3 V 2 (PO 4 ) 2 F 3 is best described as belonging to the space group A2 1 am with unit cell dimensions of a = 9.01928(4), b = 27.1379(1), c = 10.73307(5). The 100 K unit cell has a large volume of 2627.07(2) Å 3 with Z = 12 and 33 independent crystallographic sites (9 Na, 3 V, 3 P, 12 O, and 6 F) that is 3x and 6x larger than the room- and high-temperature polymorphs of this phase, respectively. Finally, the novel methods described here will be generally applicable for the solution of the complex cation-ordered structures that commonly occur for battery materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Role of Fluorine in Chemomechanics of Cation-Disordered Rocksalt Cathodes

The role of nanoscale chemomechanical behavior in the macroscopic performance of functional materials is well recognized. For lithium-ion battery cathodes, tremendous effort has been devoted to the development of new chemistry and structure, yet fundamental understanding of the correlation between redox processes and mechanical properties of the novel materials lags behind. In the present study, we prepare large discrete single grains of Li-excess cation-disordered rocksalts (DRX) and investigate their chemomechanical behavior at the particle level, using nanoresolution X-ray and electron-based spectro-imaging and chemical mapping techniques. While irregular cracking upon lithium extraction leads to the eventual breakdown of the baseline DRX oxide (Li 1.2 Ti 0.4 Mn 0.4 O 2 ) particles at a high delithiation state, the fluorinated-DRX (Li 1.3 Ti 0.3 Mn 0.4 O 1.7 F 0.3 ) clearly displays aligned cracking along the <001> direction. The resulting periodicity in the cracking pattern enables the particles to retain their integrity and, consequently, improved electrochemical stability. Density functional theory (DFT) calculations showed that fluorination leads to increased concentration of Li+ on the (001) planes and preferential Li movements along the <001>-family directions, revealing the underlying mechanism for directional cracking. Overall, our study demonstrates the unique role of fluorine in modulating nanoscale chemomechanics, which in turn influences the evolution of charge and strain heterogeneity at the particle level. These insights provide important design guidelines in further improving DRX cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗